To install to clockwork recovery manually I replaced the recovery.img file but when i restarted my phone it says:
Image signature verify fail
Your boot/recovery image may have an incorrect signature.
Please update your image to a signature official one
you can remove battery for power down.
muz786 said:
To install to clockwork recovery manually I replaced the recovery.img file but when i restarted my phone it says:
Image signature verify fail
Your boot/recovery image may have an incorrect signature.
Please update your image to a signature official one
you can remove battery for power down.
Click to expand...
Click to collapse
You probably are not rooted. Did you root via superoneclick?
Hmmm. Go into recovery and install a custom rom then flash
Make sure you do not have a stock rom on your phone.
If you flashed B528 (I think) Official ROM, you might have locked bootloader... not sure...
You can flash an unlocked bootloader, it's in the android development forum. I'm not sure if this is the fix though.
http://forum.xda-developers.com/showthread.php?t=1457490
OP, have you got u8800+?
Sent from my U8800
Same here
I have ideos x5 pro and i replaced the img file to this and i have the same prob.
I cant even recovery bot my phone. Always tha same message. Plz help
Please help .. any update for this issue
Kindly help me as i m facing the same problem in my phone ( huawei g510 )
the same message still appearing and i can NOT log into recovery menu or anything else
only tow thing to see
Pink screen instead of the recovery menu
or " Image signature verify fail "
PLZZZZZZZZ HELP
:crying::crying:
Flash rom.
Put the official rom in sd card and use the button combo on your device to flash.
I do not have u8800+, i only have u8860, they are quite similar and i believe this would work
Related
Okay so im using defy. I flashed MIUI rom before using recovery>stable recovery. And then I reboot. After I reboot, the phone wont start and it just show the MOTOROLA logo.
And then I pulled out my battery and run 2nd innit (press volume down when LED light up). And when I try to re flash ROM and I try to enter Custom Recovery or Stable Recovery, it state below
" E:Error in/system/bootmenu/script/recovery.sh
(Result: No such file or directory) "
Can this be resolved or my defy is bricked ? Argh PLEASE HELP ME PLEASEE
Well... there is always RSDLite... Check General section - sticky threads for details
You might be using old boot menu, try to flash new boot menu and recovery, at least 5.0.3.1+.
You can go back to your original stock using RSD Lite, then root and install 2nd init. After it installs the recovery, download the latest recovery (you can search the dev threads for this).
Hi, same problem here!
I instaled cm9 on my defy. Now when I try to turn it on, can't. Also cant open recovery, cause there is error: "busybox was not created in footfs". And when I open recoveri, it says: "E:Error in /system/bootmenu/script/recovery.sh (result: no such file or directory) Could someone please help me?
Also rsd doesn't recognize my mobile...
logo_q1.jpg daw failed [BRICKED] please help
I flashed a GB ROM using odin mobile trying revert from ICS after I found out about the possible superbrick, when it rebooted, all I saw was logo_q1.jpg daw failed in green letters
I can get into recovery, and can only flash SGN_XX_OXA_KJ1_FACTORYFS, but same thing after it finishes.
PLEASE HELP!!!
ok i finally got the green jpg failed error to go by flashing Abyss kernel. but now it just gives me a yellow triangle and CWM, but CMW is unable as it is stuck in boot loop.
Use PC ODIN to flash a stock GB rom!! Put in PDA section of ODIN. Well, just follow instructions in Drketan's thread in Android Development section.
**PC ODIN calls for Download Mode, I assume you can get to it because you can get to recovery (download mode is Volume Down)**
BOOM
i was able to flash a stock rom and get it working, i was figured it out right before you posted.
thanks
now I have to fix the green logo_q1.jpg draw failed. but it doesnt boot into the rom
DJTJ said:
i was able to flash a stock rom and get it working, i was figured it out right before you posted.
thanks
now I have to fix the green logo_q1.jpg draw failed. but it doesnt boot into the rom
Click to expand...
Click to collapse
After you ODIN the stock GB rom it should boot up fine. If it doesn't, boot into recovery (on the STOCK GB) rom and wipe data and cache. This will ensure you are starting fresh and getting rid whatever that green logo fail is. I'm not sure what that is.
However, if you are watching this, it means ur phone is bricked with huawei p10 lite/p10/p10 plus
Read the replies and follow the instruction noted by @Blackball and his links.
Then you will find you self a way to restore the phone.
Thanks again to @Blackball and rest of you guys, much appreciated for your help.
What on earth is Yoroot?
So, You can't enter fastboot mode am i right ?
Do you connect usb cable to your devices before press Vol- and Power button ?
Current Situation
After the battery was dead, i actually can enter the fastboot and i used TWRP 3.1.1 for huawei P10 Plus from github. double wiped my device and by far i have entered the system normally.
However, the ROM wasn't official and i lost my warranty for unlock my huawei phone. And the custom service from Huawei said that they don't provide any official ROM Since it's Android 7.0 .
This ROM is really crappy that i can't delete/uninstall any Application i installed.(It gets reboot everytime i try to and the Application is still there even i just tried to Delete/Uninstall).
Worst of all, some options does not work properly in "Option" menu . (For example i can't access to "Developer mode" that everytime i press it it tabbed back to the former menu.)
I really hate this crappy menu so i tried to search on the internet for P10 Plus ROM so far i get B133 update ROM i can find and i tried to install it from SDcard by pressing VOL - and VOL + and Power buttom.
It says failed to update system at 5% while updating/recoverying the system.
and the ROM which i'm using was found in HUAWEI's official fan forum from Club.Huawei.com a forum belongs in china.(Rooted rom B140).
Right now seems the only option for me is to find a better ROM than this .(At least won't get me so many bugs like this one .:crying: )
and Thanks for your comment "Bigbearxl" it worked as normally it should after the battery was dead then i recharged it.
Yet Right now the PC doesn't recognize the device though Via-Usb because it's not Huawei official ROM and Hisuite helper only recognize their own ROM and the rest Phone helper or ADB can't recognize the device while The Phone is Booting normal .
And Reply to "Craphead" Yoroot is a special Root tool for Huawei P10/P10 plus made by chinese from Huawei Fan Club forum.
New Update
After rewrited boot.img though fastboot mode from https://forum.xda-developers.com/p10/help/root-huawei-p10-p10-t3589946 thanks to "yury_z, " i can start to delete files with current system, but it's still crappy that it doesn't even have camera
So i think i will try dload method to recovery my phone with firware that i found in forum.
Failed
Looks like i have to stock with that bit longer
dload with update.app method failed. and recovery TWRP install missing md5.
Unless i get System.img or i guess i can't get another system.:crying:
This work for P10plus too
https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-update-package-t3593108
WackyJoker said:
Looks like i have to stock with that bit longer
dload with update.app method failed. and recovery TWRP install missing md5.
Unless i get System.img or i guess i can't get another system.:crying:
Click to expand...
Click to collapse
Maybe you could also try installing stock firmware with funkyhuawei, it's not for free though. But dload method never works on P10/plus unfortunately.
thanks @Blackball and @Craphead. i checked both of your method but didn't work and this new twrp 3.1.0 i downloaded displayed sd card 0mb. and i followed poster's step and missing one file.
However i might found a useful Thead that might work and i'm gonna try tonight.
http://www.stechguide.com/huawei-p10-plus-b133-nougat-update/
That is what I wrote.
It seems that firmware finder work for P10/plus now.
https://play.google.com/store/apps/details?id=com.teammt.gmanrainy.huaweifirmwarefinder
@Blackball not sure you what you mean by that, do you mean that you can actually use it to install firmware on p10/p10 plus now? If so how did they manage to get around the authentication issue?
I debranded my phone from L09 to L29 DualSim with this guide. It work with moded stock recoverys.
Blackball said:
That is what I wrote.
It seems that firmware finder work for P10/plus now.
https://play.google.com/store/apps/details?id=com.teammt.gmanrainy.huaweifirmwarefinder
Click to expand...
Click to collapse
well i tried your method but there were some file that can't be downloaded from that post so i used another and,eventhough with complete files, the method i posted and i was going to use it tonight. Failed.
did all the steps from update.bat indicated and all worked fine till the last step that it says " automaticly install system" and the phone shows error at recovery.(similar to dload method because it automaticly create dload and exact those ROM files)
it indicates a big red " ! " sign and stopped. basicly i'm back to "No System Status"
The only method wowrks for my "P10 Plus" is " flash system system.img " method.
yet i don't know how to exact system.img boot.img recovery.img etc from those stock firmware like those chinese.
i have some of their rewrote roms (it's crappy because i has no default camera and it's for chinese P10 Plus A.K.A VKY_L29) .
Yet i can't find any System.img on google by far.
Blackball said:
I debranded my phone from L09 to L29 DualSim with this guide. It work with moded stock recoverys.
Click to expand...
Click to collapse
I haven't tried your Firmware Finder method , i think i can install crappy system.img then try your Firmware Finder method.
Because right now i wiped my system and i'm without system :crying:
Guys This Thead https://forum.xda-developers.com/showthread.php?t=2315547
tells you how extract flashable rom files from firmware update.app.
It should work but i only made to Unknownfile XX .img and i can't download his script "HuaweiFinder" from his google drive.
Holy Crap it worked, i Extracted system.img and other img from update.app by some Chinese scripted unpack script. and I'm trying to restore my device though fastboot mode with adb.
Blackball said:
That is what I wrote.
It seems that firmware finder work for P10/plus now.
https://play.google.com/store/apps/details?id=com.teammt.gmanrainy.huaweifirmwarefinder
Click to expand...
Click to collapse
well just tried your method and at last step it says installing failed. then i reboot entered rec mode choose wipe/factory reset
wiped till 50% and stopped, it can't factory reset.
Before this method fastboot mode was " Phone unlock " " Bootloader unlock."
Now it's just "Phone unlock"
now i'm stuck at boot loop "your device is booting now" then it rebooted and back to "your device is booting now" again then automaticly goes to Erecovery mode. I have to shutdown device for now and hope i can find some solution tomorrow :S
When you try this :
https://forum.xda-developers.com/showthread.php?t=3593108
It's important that you have the 3 zip files from your wanted firmware and rename them correctly. Don't mix with another firmwares.
Blackball said:
When you try this :
https://forum.xda-developers.com/showthread.php?t=3593108
It's important that you have the 3 zip files from your wanted firmware and rename them correctly. Don't mix with another firmwares.
Click to expand...
Click to collapse
i did this method yesterday and, well, i can't get update_full_VKY-L09_hw_eu.zip from the link : http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1475/g104/v85029/f1/full/filelist.xml . only Update.zip and Update_full_data.zip . the other one "update_full_VKY-L09_hw_eu.zip" i had to get it from another webside (it's also b133)
it shows a big "!" sign at the last step . i did everything it tells and tried both sdcard&script way to flash twice both rebrand&same brand update.
after the failure i can't enter "Vol +" and "Vol -" and "Power button" to do dload method . When i try to do that it just goes in Recovery mode.
In recovery mode i tried to wipe data/factory reset. It stopps at 50% which is after wipe and starting to factory reset at 50% it failed.
i try to flash in system.img and boot.img yet i still can not enter the system and stuck at bootloop.
Urgent help needed as I'm leaving the country at the end of the week o any help is appreciated!
Just successfully rooted my device:
Black, Unlocked, PRA-LX1, UK, Dual SIM
After doing so successfully, I attempted to flash LineageOS from the following link:
https://forum.xda-developers.com/p8lite/p8-lite-2017-development/rom-lineageos-15-1-hi6250-devices-t3811583
Although when I completed Step 6 on the Installation guide and rebooted the phone, I started seeing the message:
------------------
ERROR MODE
Attention!
Please update system again
(Green Android picture)
Error!
Func NO : 11 (recovery image)
Error NO : 2 (load failed!)
------------------
Despite this, I didn't receive a box with my phone due to being second hand, and I didn't see the model number on the receipt as it was from a reselling store. I didn't remember to note down the specific model number
It'd be extremely helpful if someone could possibly help just from the device description above as I'm not sure if it's safe for me to just attempt to flash every stock rom for every other LX1 device out there.
---------------------------------------------------------------
Update:
To restore this, I connected via fastboot with a working USB & flashed an original stock recovery in the video found here
(Just in case their download link ever goes down, I have uploaded the same copy to my MEGA, found here)
The recovery installed fine when using the command
fastboot flash recovery oeminfo.img
Click to expand...
Click to collapse
Whenever trying to flash any other recovery such as twrp before this fastboot stuck on a loading icon.
The stock recovery seems to be downloading the original firmware, too.
PRA-LX1C432B202 is presumably the model.
Both the bootloader and FRA were unlocked when everything else was inaccessible.
Looks like the custom ROM's recovery that you've flashed is not compatible with PRA-LX1. Try to flash stock recovery. If not working, then flash stock firmware.
Thanks @Botar230!
I didn't see your comment until just now after deciding to edit this post since I've gotten a step closer to restoring my device.
Your solution was the method I used although I didn't know my phone model, so I found a random solution which just worked for my device, and the eRecovery seems to be downloading the stock firmware anyways. Thanks again
Before flashing this lineage os you should update to EMUI8 to get treble support, i suppose you was running EMUI5, hence the error mode.
Thank you in advance for any help you can provide.
I successfully rooted my Zenfone 3 Max (ZC520TL) using Magisk, but wanted to restore the phone back to its factory firmware. I used the uninstall option in Magisk but this reported that it could not find the backup boot image. Unfortunately I then made the mistake of following unroot steps on other sites rather than this excellent resource. Long story short I somehow managed to lock the bootloader again so when I try to use fastboot to flash any image I get the error "FAILED (remote: not allowed in locked state)".
When I turn on the phone, on the ASUS splash screen it says...
Red State
Your device has failed verification and may not work properly
Your device will boot in 5 seconds
… ie boot loop.
Q) What can I do to get my phone usable again? I searched this site and found lots of info on how to unlock the bootloader and how to root, but nothing about how to stop the boot loop.
I do have access to the Recovery mode and see options such as "Apply update from ADB" and "Apply update from SD card" but I am unsure if these will help?
Thanks again for any help and/or links to solutions on this site that I missed.
I was caught in similar situation, due to unsuccessful flashing using asus flashtool, I ended up flashing stock firmware (not the raw firmware) via recovery and everything was back to normal.
Thank you... but...
sanctitude888 said:
I was caught in similar situation, due to unsuccessful flashing using asus flashtool, I ended up flashing stock firmware (not the raw firmware) via recovery and everything was back to normal.
Click to expand...
Click to collapse
Thank you @sanctitude888 so much for your help. I'm new to rooting but keen to learn. What's the difference between "stock" firmware and "raw" firmware? For example I can download the device firmware from ASUS and extract the boot.img file (ASUS no longer provides the recovery.img file) but is this considered "stock" firmware or "raw" firmware?
You also mentioned you flashed via recovery. In Recovery mode I see multiple options such as "Apply update from ADB", "Apply update from SD card", "Mount /system", etc. Could you please be more specific on how you did the recovery please?
Thank you for your help.
Kind Regards
Sorry for very late reply. Despite useful guides are there, they are pretty much scattered. Few posts or threads I could suggest as follows :
1. https://forum.xda-developers.com/zenfone-3/how-to/updated-unlock-relock-bootloader-t3749456
2. https://forum.xda-developers.com/zenfone-3/how-to/zenfone-3-ze520kl-ze552kl-unofficial-t3738811
3. https://forum.xda-developers.com/zenfone-3/help/help-ze552kl-bootloop-flashing-t3820371
4. https://forum.xda-developers.com/zenfone-3/how-to/guide-how-to-root-zenfone-3-official-t3745650