Hi Everyone ,
I attempted to root my Dell XCD35(aka Zte blade)..Rooting went fine(z4root)... I had flashed CWM recovery from Rom Manager... During recovery the screen appeared inverted...Then it gave me 3 optn-
flash update.zip,
clear user data,
clear cache.
I did not find clear Dalvik cache option so i proceeded.... I cleared the cache and all user data... and proceeded to update.zip... I had saved the stable rom ( cm-7.2.0-blade.zip ) available on CyanogenMod official site on my SD card...
Initially on searching it could not detect the .zip file... So i renamed the cm-7.2.0-blade.zip to update.zip... After this the recovery mode flashed it...
On rebooting, the phone shows the dell logo and then cyanogenMod7 animation and then goes into a loop... On pressing power+volm key it goes into FTM mode......... PLS HELP...
mohitgujar said:
Hi Everyone ,
I attempted to root my Dell XCD35(aka Zte blade)..Rooting went fine(z4root)... I had flashed CWM recovery from Rom Manager... During recovery the screen appeared inverted...Then it gave me 3 optn-
flash update.zip,
clear user data,
clear cache.
I did not find clear Dalvik cache option so i proceeded.... I cleared the cache and all user data... and proceeded to update.zip... I had saved the stable rom ( cm-7.2.0-blade.zip ) available on CyanogenMod official site on my SD card...
Initially on searching it could not detect the .zip file... So i renamed the cm-7.2.0-blade.zip to update.zip... After this the recovery mode flashed it...
On rebooting, the phone shows the dell logo and then cyanogenMod7 animation and then goes into a loop... On pressing power+volm key it goes into FTM mode......... PLS HELP...
Click to expand...
Click to collapse
Which version of cwm? Go into recovery again by pressing vol- and power button. Then clear data. Clear cache. In advance clear dalvic. Then install zip from SD card..not to update zip. Then flash gapps.
Sent from my Blade using xda app-developers app
Thanks keviv77... Cleared the cache and booted successfully into cyanogenmod7... cheers...
Sent from my Blade using xda app-developers app
mohitgujar said:
Thanks keviv77... Cleared the cache and booted successfully into cyanogenmod7... cheers...
Sent from my Blade using xda app-developers app
Click to expand...
Click to collapse
Welcome to the party
Sent from my Blade using xda app-developers app
help needed
I also have the similar problem with my dell xcd35 aka zte blade. When i press vol+& power button it gives me 3 options 1) flash update.zip 2) clear user data & 3) clear chache. when i press vol-& power button in enters into FTM mode. Please help me with this. Also guide me how to take current rom backup. Thanks in advance
aryan0811 said:
I also have the similar problem with my dell xcd35 aka zte blade. When i press vol+& power button it gives me 3 options 1) flash update.zip 2) clear user data & 3) clear chache. when i press vol-& power button in enters into FTM mode. Please help me with this. Also guide me how to take current rom backup. Thanks in advance
Click to expand...
Click to collapse
Download titanium backup.take back up with that and power on with vol- pressed.
Sent from my Blade
Thank you very much sir for helping me in taking backup, but there is one more issue in which i need your help. Can you please guide me "How can i install cm7.2 with 3 options in CWM (5.0.2.0 i.e. latest) 1) flash update.zip 2) clear user data 3) clear cache"
also when i reboot using vol- & power button it shows "FTM" and when i reboot using vol+ & power button it gives above listed 3 options only
what to do ? please sir provide me with a solution to these problems
Once again Thankyou
aryan0811 said:
Thank you very much sir for helping me in taking backup, but there is one more issue in which i need your help. Can you please guide me "How can i install cm7.2 with 3 options in CWM (5.0.2.0 i.e. latest) 1) flash update.zip 2) clear user data 3) clear cache"
also when i reboot using vol- & power button it shows "FTM" and when i reboot using vol+ & power button it gives above listed 3 options only
what to do ? please sir provide me with a solution to these problems
Once again Thankyou
Click to expand...
Click to collapse
Flash cwm again from ROM manager. Then reboot into recovery by pressing vol- & power button. Then wipe cache. Wipe data. Wipe dalvic cache.then install zip from SD card.flash rom n then gapps
Sent from my Blade
aryan0811 said:
what to do ? please sir provide me with a solution to these problems
Once again Thankyou
Click to expand...
Click to collapse
Try flashing older version of CWM. Search similar threads, many had almost identical issues. I flashed my Idea Blade three- four times, to boot successfully into CWM.
Sent from my Idea Blade using xda app.
aryan0811 said:
I also have the similar problem with my dell xcd35 aka zte blade. When i press vol+& power button it gives me 3 options 1) flash update.zip 2) clear user data & 3) clear chache. when i press vol-& power button in enters into FTM mode. Please help me with this. Also guide me how to take current rom backup. Thanks in advance
Click to expand...
Click to collapse
The reason your blade is entering into FTM mode is that You havent flashed ClockworkMod recovery properly... Now for the solution... Enter into recovery with Power and Vol+... Flash update.zip... cyanogen mod 7.2 will be flashed...Download gapps for cynmod 7.... Flash it... Download Rom Manager from Market... open it and flash recovery (Working mobile data or wifi needed)... Done
Related
Hi everyone
i was trying to install cutom rom in my gsy. i wiped it data , cache and dalvic cache . and installed it using 'install zip from sd' mode in CWM. and rebooted and waited to start in 5 minutes . but instead it just hanged in its galaxy young screen . And i am just blank what to do next
custom rom - jellyblast 3
If you can go to recovery mode try wiping data and cache again and if you can't go to recovery mode try flashing a stock rom again
Sent from my GT-S5360 using xda app-developers app
"theviper" said:
If you can go to recovery mode try wiping data and cache again and if you can't go to recovery mode try flashing a stock rom again
Sent from my GT-S5360 using xda app-developers app
Click to expand...
Click to collapse
But how can i flash
My mobile hangs just in the first boot screen i.e. where it states"Samsung galaxy y young GT-5360"
please learn to search,
there are like a thousands of threads out there to teach you how to fix your phone
Use odin. Download the appropriate firmware from the general thread and use Odin 1.85 provided in the attachment. Put your phone in download mode by holding home, power and volume DOWN key. Press the volume up key to enter Odin mode. Extract your firmware files somewhere and link the relevant files in the relevant places in Odin. Dont worry about the files not present. Connect your phone and there will be an indication your phone is connected. A white area turning yellow.
Click start. Youre most likely going to experience bootloops but now you can boot into recovery and wipe data and cache and install the ROM you wanted.
Hey,
My defy freezes after installing http://forum.xda-developers.com/showthread.php?t=1161110 this Rom in GB+ Version on my defy. I previously had cm7 2.3.7 on it. I forgot to delete all user files, and as i said now it freezes @ bootlogo. If i press vol down, and power i get to the recovery logo, but tapping in the bottem right or anywhere on the screen does not help.
what can i do?
GodspeedHD said:
Hey,
My defy freezes after installing http://forum.xda-developers.com/showthread.php?t=1161110 this Rom in GB+ Version on my defy. I previously had cm7 2.3.7 on it. I forgot to delete all user files, and as i said now it freezes @ bootlogo. If i press vol down, and power i get to the recovery logo, but tapping in the bottem right or anywhere on the screen does not help.
what can i do?
Click to expand...
Click to collapse
Well if u can access recovery download another rom and flash it (wipe data/cache before flashing) our if you can't access recovery try with Odin to go back to stock
Press thanks if I helped you
Djole-97 said:
Well if u can access recovery download another rom and flash it (wipe data/cache before flashing) our if you can't access recovery try with Odin to go back to stock
Press thanks if I helped you
Click to expand...
Click to collapse
I can acces motorola recovery using the middle volume button. Wiping Data and Cache didnt help me. Flashing Cyanogenmod as Update.zip doesnt work, this error occours:
Installation aborted
E: Cant mount CACHE:recovery/log
GodspeedHD said:
I can acces motorola recovery using the middle volume button. Wiping Data and Cache didnt help me. Flashing Cyanogenmod as Update.zip doesnt work, this error occours:
Installation aborted
E: Cant mount CACHE:recovery/log
Click to expand...
Click to collapse
flash the stock sbf,and start from scratch !!
I've tried twice, first time it went blank on boot up and I could only here tge boot sound. The second time it got stuck at the Samsung Galaxy Y logo.... I want this ROM ao bad. My phone has all tge requirements: rooted, has stock kernel etc.... And I follwed EVERY step correctly... What is the problem?
Sent from my GT-S5360 using Tapatalk 2
Mo0s said:
I've tried twice, first time it went blank on boot up and I could only here tge boot sound. The second time it got stuck at the Samsung Galaxy Y logo.... I want this ROM ao bad. My phone has all tge requirements: rooted, has stock kernel etc.... And I follwed EVERY step correctly... What is the problem?
Sent from my GT-S5360 using Tapatalk 2
Click to expand...
Click to collapse
Flash Stock ROM via ODIN (Let me know if you dont know what it is)
Put the ROM zip and Clockworkmod in the root of your SD card
Boot into Recovery(Three button combo)
Select apply update
Select the cwm file
Wipe data/factory reset
Wipe cache
Go to advanced
Wipe Dalvik cache
then select install zip from sd card
choose zip from SD card
let it install
Reboot
Report back here
tjsgy said:
Flash Stock ROM via ODIN (Let me know if you dont know what it is)
Put the ROM zip and Clockworkmod in the root of your SD card
Boot into Recovery(Three button combo)
Select apply update
Select the cwm file
Wipe data/factory reset
Wipe cache
Go to advanced
Wipe Dalvik cache
then select install zip from sd card
choose zip from SD card
let it install
Reboot
Report back here
Click to expand...
Click to collapse
Done.... Still stuck the Gakaxy Y logo
Sent from my GT-S5360 using Tapatalk 2
Before wiping data in CWM
Go to mounts and storage>check if "unmount system" is there. If its "mount system" select it and press the centre key which wil turn it to "unmount system".
Also wipe data and cache in stock recovery before going to CWM recovery.
Sent from my GT-S5360 using xda app-developers app
devilrulz4ever said:
Before wiping data in CWM
Go to mounts and storage>check if "unmount system" is there. If its "mount system" select it and press the centre key which wil turn it to "unmount system".
Also wipe data and cache in stock recovery before going to CWM recovery.
Sent from my GT-S5360 using xda app-developers app
Click to expand...
Click to collapse
Ok, can you please post an alternative link for the rom. I'm having problems downloading from the Mediafire link
Sent from my GT-S5360 using Tapatalk 2
http://www.mediafire.com/?m3cbyliuiek3cu3
Here was link Dude ...!!
Dont Waste Ur Time In Saying Thanks
Just Press It..!!
Cool.yash17 said:
http://www.mediafire.com/?m3cbyliuiek3cu3
Here was link Dude ...!!
Dont Waste Ur Time In Saying Thanks
Just Press It..!!
Click to expand...
Click to collapse
Does this one work?
Sent from my GT-S5360 using Tapatalk 2
I can flash jellyblast but im one the gt-5360T
can someone please explain how i can keep the autorotation from stock rom when i flash jellyblast
WEAREBORG2913 said:
can someone please explain how i can keep the autorotation from stock rom when i flash jellyblast
Click to expand...
Click to collapse
Auto rotation is already present in Jellyblast rom u can toggle it from status bar easily
funnypharmacist said:
Flash Stock ROM via ODIN (Let me know if you dont know what it is)
Put the ROM zip and Clockworkmod in the root of your SD card
Boot into Recovery(Three button combo)
Select apply update
Select the cwm file
Wipe data/factory reset
Wipe cache
Go to advanced
Wipe Dalvik cache
then select install zip from sd card
choose zip from SD card
let it install
Reboot
Report back here
Click to expand...
Click to collapse
I have the same problem and I followed the instructions on page 1 of the Jellyblast ROM exactly, also this one. After that I tried different ways with different CWM, choose an older version of the rom, reinstall Kuro Kernel after flashing Rom, delete second partition (ext2)... But I always get the bootloop.
Edit:
Solved: I made a stupid mistake. I chose on the download page the Update 5, because i thought it's the full ROM with update 5. Because of the green colour of the ROM download link, i didn't recognize that it's a link.
(i read many threads relating my issue but they were not same, they was little difference in the problem. and i also tried there solutions but no improvement. so i decided to ask in a thread)
i was using defy+ with CM7 rom.
I installed this rom on my defy+
http://forum.xda-developers.com/showthread.php?t=2044797
first it booted and was working but after rebooting it resulted in boot loop .
( it shows Motorola sign then shows rom animation within few seconds is resumes rom animation and it keeps repeating animation.)
i waited for it an hour but is didn't go well.
then i tried restoring my old rom using CWM but i was unable to restore it is also resulted in same...
then i tried installing sdf using rsd but i have no improvement....
Now i can only go to bootloader version 09.1 and i says battery is low , can't program . i put the charger for whole night but i still says battery low can't program
can you please help me solving this problem
After installing that Rom you needed to enter boot menu and format data to ext4. Now, if you're unable to flash any sbf due to low battery then refer here: http://forum.xda-developers.com/showthread.php?t=892026
Or if you have access to another defy then use its battery and flash the sbf. Wipe data from stock recovery if you run into any issues after sbf flash
As stated below dalvik cache should be wiped, and data is automatically wiped when you format it to ext4 as stated above
Sent from my MB526 using xda premium
thekguy said:
After installing that Rom you needed to enter boot menu and format data to ext4. Now, if you're unable to flash any sbf due to low battery then refer here: http://forum.xda-developers.com/showthread.php?t=892026
Or if you have access to another defy then use its battery and flash the sbf. Wipe data from stock recovery of you run into any issues after sbf flash
Sent from my MB526 using xda premium
Click to expand...
Click to collapse
Or in other words you need to wipe data/cache and dalvik BEFORE and AFTER flashing the custom ROM (neagan or other). For now charge the battery and do the sbf flash. Pay attention at the "optional" indications. It better to do it.
CWM is missing
using your link i can solve the problem
but i dont have CWM so i cant wipe delvik data/cach
i only have bootloader
i only can go to bootloader and can't do any thing else. because CWM is removed.
tell me if you have any information about to do something using bootloader..
Do it from stock recovery, data wipe and cache wipe
Sent from my MB526 using xda premium
From stock recovery (bootloader) you will format as ext3 but is better to format in ext4 and that can be done from custom recovery. For that you have to install 2init and run it.
He's unable to boot...boot loop was before battery issue
Sent from my MB526 using xda premium
thekguy said:
He's unable to boot...
Sent from my MB526 using xda premium
Click to expand...
Click to collapse
Yes because of low battery. Software solution is ... after charging.
where is stock recovery??
how to boot in stock recovery??? sorry I dont know if there any stock recovery is existed...... ( i tried different buttons while Motorola sign but i got nothing except bootloader and download mod)
tell me i think i can do it using stock recovery
because there is no problem in bootloader. even i am able to flash new SDF.
it makes trouble in loading ROM....
what do you think?
battery is working now
thekguy said:
He's unable to boot...boot loop was before battery issue
Sent from my MB526 using xda premium
Click to expand...
Click to collapse
i solved this problem using universal charger. i pulled off the battery and put in universal charger and charged it for two hours.
stock recovery?
now i just need to know how to boot in stock recovery???
AW: [Q] Defy+ not loading any rom.
There is a beginner guide anywhere in xda/defy sektion
You should read it
MB525 red lense
stock recovery?
i just need to now how to go into stock recovery?
How do I enter Recovery Mode?!: With the Phone off press VOLUME DOWN then, while still pressed, power up the phone and leave VOL key pressed until you see a Yellow triangle, once you see this you are in Recovery now press Vol Up and Vol Down at the same time (if you are in Froyo) and the menu will appear, if you are on Éclair the menu should appear without having to press anything.
copy/paste from this thread.
thanks
Thanks bros
I recovered my phone and i is running with CM7 and i am not gonna try CM10 again until it comes with all bug fixes..
thanks again for your help..
I've recently updated my phone to the unofficial CM 13 , and now that the official android 6.0 for my phone is released I wanted to update to it. The problem is that the official way of updating is holding both volume buttons and power button while phone is turned off, but that takes me to the recovery of the installed CM13. I tried flashing the stock recovery, and the furthest i got was that the installation began , but got stuck at 0 %.
Note that when I tried installing CM13 , there was a problem with the package identifying my device, so i searched and found out that i can skip the device check, once i did that i could install CM13, but when i go to about phone in settings , i find that device type is unkown.
Install the custom CWM recovery then wipe davlik cache, power off phone and then try to flash stock ROM
kamilb365 said:
Install the custom CWM recovery then wipe davlik cache, power off phone and then try to flash stock ROM
Click to expand...
Click to collapse
How can I flash the stock rom with CWM , because I believe it's only flashable with the stock recovery , and I tried flashing it with the stock recovery but it didn't work .
You dont need the stock recovery. Just boot into CWM or TWRP and wipe cache & davlik cache.
Then power off the phone. When its off hold the power button and the + and - buttons.
When the Huawei Ascend logo shows up let go of the power button and keep holding the + and - buttons until the installation screen shows up.
Take off the case off the phone if you have any.
kamilb365 said:
You dont need the stock recovery. Just boot into CWM or TWRP and wipe cache & davlik cache.
Then power off the phone. When its off hold the power button and the + and - buttons.
When the Huawei Ascend logo shows up let go of the power button and keep holding the + and - buttons until the installation screen shows up.
Take off the case off the phone if you have any.
Click to expand...
Click to collapse
Whenever I try to do that it gives me an error, the error doesn't even stay enough time to be read.
Just to add that you should have an apdate.app file in folder called dload on external SD card for you to be able to flash it back to stock if you have done that already not sure ??
Sparko612 said:
Just to add that you should have an apdate.app file in folder called dload on external SD card for you to be able to flash it back to stock if you have done that already not sure ??
Click to expand...
Click to collapse
yeah , its not my first time flashing a rom
You might as well update to CM14.1 if you can't go back to EMUI lol
Or the version you're trying to flash is not compatible with your device?
I have same problem. I have Kitkat in the phone. I install TWRP recovery.. I want oficial Lolipopstock rom. Update via mobile menu - manualy localy update - dlan folder - inside Dload is LOLIPOP stock rom, mobile reset and go to the TWRP recovery.. again again.. Dalvik chache and chache has been deleted, but still same problem. I cant upgrade my phone to the stock rom Lolipom via Local upodate
EDIT: I must deleted all.. ceche, dalvik chache, system.. all without sd card, there was dload folder with update with kitkat stock rom.. I turned my phone off then I holded power buton vol + and -. Instalation complete
Any solution? I also have cwm Cnmode 12.1 rom and want to be able to flash stock rom 6.0. problem is I dont know how to get to stock recovery.. .. SWM recovery does not recognize .app extension for flashing and stock rom is in .app extension please help. G7 L03
Thank you
Some one please help
I have installed CWM recovery and Can not go back to stock rom, I want to go back to stock rom and maybe update to Marshmallow 6. Phone is unlocked..
Can someone give me hint how to do it? trough CWM I cant flash stock .APP only Zip but stock is in APP format
Maspindzeli said:
I have installed CWM recovery and Can not go back to stock rom, I want to go back to stock rom and maybe update to Marshmallow 6. Phone is unlocked..
Can someone give me hint how to do it? trough CWM I cant flash stock .APP only Zip but stock is in APP format
Click to expand...
Click to collapse
Put the Update.app in a dload folder and turn off the phone.
Then hold power and the + and - buttons until installation begins.
kamilb365 said:
Put the Update.app in a dload folder and turn off the phone.
Then hold power and the + and - buttons until installation begins.
Click to expand...
Click to collapse
I have custom recovery, I need to get back to stock recovery to do that... Custom recovery does not see update.app ... Please help . Custom recovery is looking for Zip file and cant see .app file at all...
Maspindzeli said:
I have custom recovery, I need to get back to stock recovery to do that... Custom recovery does not see update.app ... Please help . Custom recovery is looking for Zip file and cant see .app file at all...
Click to expand...
Click to collapse
You do not need stock recovery......
Just do what I told you in the previous post.
kamilb365 said:
You do not need stock recovery......
Just do what I told you in the previous post.
Click to expand...
Click to collapse
I have done it and tried many times ... screen takes me to custom recovery every time I do that.. I do that and I get to custom recovery and thats it... nu update... I have copied update app to dload folder and have tried like 15 times... I get to stock recovery (( it does not update
Maspindzeli said:
I have done it and tried many times ... screen takes me to custom recovery every time I do that
Click to expand...
Click to collapse
What recovery you using?