Today i will flash new rom..my previous is RRv7 ICS, so i flash abys 4.2,reboot recovery,full wipe,format /cache /data /sdcard /emmc , but when i recognise my data in external memory gone because of formating >< , so i try to flash stock rom with odin pc, but my devices didnt recognize in my pc..so what must i do?
Have you installed ADB Drivers for your device ? You need them for Odin to see your device properly. If not, just install Kies and it'll get drivers for you - if you want to do it manually, however, you could just install drivers from packages posted in many rooting guide threads. Also, Odin will see your device only when its put to download mode.
As teh title says i am using v2.5.0.0 of this recovery rom for my samsung s4 device.
The issue is that i cannot mount my SD card whilst in recovery mode.
It never appears on my windows 8 machine when i connect my device in recovery mode.
I have all the usb drivers for my device installed and that is how i originally put a rom on it when i was running a stock rom.
Now that i did a wipe i obviously cannot mount my device on a normal running stock rom because its removed and i am trying to install a new one.
How can i access and transfer files whilst in recovery mode?
Do i need any additional drivers?
Still cant mount. i notice ond evide manager it says the drivers are missing for SAMSUNG_Android yet i have installed samsung kais!
jonneymendoza said:
As teh title says i am using v2.5.0.0 of this recovery rom for my samsung s4 device.
The issue is that i cannot mount my SD card whilst in recovery mode.
It never appears on my windows 8 machine when i connect my device in recovery mode.
I have all the usb drivers for my device installed and that is how i originally put a rom on it when i was running a stock rom.
Now that i did a wipe i obviously cannot mount my device on a normal running stock rom because its removed and i am trying to install a new one.
How can i access and transfer files whilst in recovery mode?
Do i need any additional drivers?
Click to expand...
Click to collapse
Uninstall KIES and any other samsung usb installed utilities first.
Then download the official Samsung USB drivers for windows here: http://developer.samsung.com/board/download.do?bdId=0000000700&attachId=0000000001
After all the uninstalls are done reboot computer and install the official samsung usb drivers.
Once that's done reboot computer one more time and then your phone should and will
recognize your phone unless you have a bad cable or a non-functioning usb port in computer.
Good luck!
Hello,
I have installed a custom rom (Marshmallow) for my SM-A500FU through the adb. Now when I want to install a different rom I have to either boot into TWRP and I can't do that because booting into recovery simply restarts a phone, or I have to boot into Download mode and install it with the adb. The problem is that when the system is running, the phone simply charges, no Windows notifications or devices appear and when the phone is in Download mode Windows detects that a device is plugged in but can't recognize it. I have all the adb drivers, KIES and all that so it's not a problem. Can I somehow boot into TWRP or make Windows recognize my phone so I can use adb?
Thanks.
before installing a rom, have you wiped system, cache, dalvik and data? If yes try with a hard reset and if it doesn't work, too flash stock firmware
Hey,
yes, I wiped everything, I have flashed many roms earlier and I believe I have flashed it properly. I have managed to get into TWRP so I can actually flash FWs. I have only updated my rom to the newest CW13 build there is for my A5. Is there any way to flash a stock FW (for example a XEO KitKat) without ODIN? I can only use ADB through TCPIP and TWRP, so there is no way for me to flash it through ODIN.
Thanks.
so, if you press power+home+vol- it doesn't reboot in download mode, right?
It does boot into the Download mode. The problem is that when I plug the phone into my PC in Download mode it says that the USB Device is not recognized in Windows with 'A request for the USB device descriptor failed' error. When I plug it in when the phone is booted normally into android, it just charges, Windows doesn't see it at all.
whzq said:
It does boot into the Download mode. The problem is that when I plug the phone into my PC in Download mode it says that the USB Device is not recognized in Windows with 'A request for the USB device descriptor failed' error. When I plug it in when the phone is booted normally into android, it just charges, Windows doesn't see it at all.
Click to expand...
Click to collapse
Well, you can't flash samsung firmwares with twrp. Try flashing another rom through twrp
Alright, I have tried to flash multiple ROMs. Currently sitting on a Lollipop. Nothing changed, though. On every single ROM the problem still persists. It's not a problem with the PC as I've tried to connect my A5 to a laptop with freshly installed Windows and KIES and it behaved the same way as on my PC. The cable is fine as well, I have tested it with my old SGS3, it worked just fine on both my PC and laptop. Frankly, I have no idea what to do next, I'm starting to think that the port is physically broken. It's weird though, as I can still charge my phone and there is a response when the phone is in Download mode, just that Windows can't recognize it.
Try with adb command "adb reboot recovery" if it doesn't work you can downlaod odin mobile from play store and flash stock firmware!
Do you have odin for windows ?
zyxw-androidiani said:
Try with adb command "adb reboot recovery" if it doesn't work you can downlaod odin mobile from play store and flash stock firmware!
Do you have odin for windows ?
Click to expand...
Click to collapse
Yes, ihlf his device can boot he can use mobile odin. Have you tried with other PCs, just to see it isn't a problem of your pc?
In my experience usb device descriptor errors are related to the specific PC the error occurs on due to device driver conflicts, but if you get the same error on another pc then it could be the hardware.
I'd certainly be trying another cable first on a fresh PC.
Anyway regardless of all that you can flash the stock firmware with FLASHFIRE available on play as long as you have root.
Sent from my SM-T280 using XDA-Developers mobile app
Can i install any rom,recovery, with the help of stock recovery?
My device is not booting at all, it stock at galaxy s4 logo.
I can go to stock recovery & download mode
My pc & odin is not detecting my phone in download mode& recovery mode(I had changed about 10 data cables & 2 laptops windows 7,10 & all version of odin, I had tried installing every samsung drivers,kies, just every thing)
So plz help me out.
No, you can't.
And since your phone is not being detected, the only solution is to take it to a shop.
But if you can boot into odin or download mode then you have still a chance. Be sure you have a samsung driver to be able your computer and odin detect your phone
Is it possible the phone's USB port is damaged?
Hello,
i have samsung J500H
please i need your help , I accidentally wiped data , system , storage and everything.
my phone now boot only to TWRP .
I have tried to install via odin but it does not show my device and windows shows unknown usb device ( samsung usb driver is already installed)
I have tried to install Roms but nothing , 3 different roms. Always error , Fail
what can i do ?!