Today i will flash new rom..my previous is RRv7 ICS, so i flash abys 4.2,reboot recovery,full wipe,format /cache /data /sdcard /emmc , but when i recognise my data in external memory gone because of formating >< , so i try to flash stock rom with odin pc, but my devices didnt recognize in my pc..so what must i do?
Have you installed ADB Drivers for your device ? You need them for Odin to see your device properly. If not, just install Kies and it'll get drivers for you - if you want to do it manually, however, you could just install drivers from packages posted in many rooting guide threads. Also, Odin will see your device only when its put to download mode.
Related
hello,
i did wipe dalvik cache on my galaxy s i9000
and tryed to turn on the phone
the phone enterd into a boot loop,
i tried to enter to recovery mode but without success
so i tried to enter to download mode with success
so i tried to flash new rom with odin but the computer not detect usb...
someone can help me!?
thanks!
talzigi said:
hello,
i did wipe dalvik cache on my galaxy s i9000
and tryed to turn on the phone
the phone enterd into a boot loop,
i tried to enter to recovery mode but without success
so i tried to enter to download mode with success
so i tried to flash new rom with odin but the computer not detect usb...
someone can help me!?
thanks!
Click to expand...
Click to collapse
Do you have kies installed?
Firstly give some information about what Rom you are on
If you are on GB rom search for SGS USB driver. If you are on ICS rom search for Nexus USB driver. If you don't know which ROM was last install both drivers. You can find them on Samsung website. Or check my thread how I almost made a brick.
i have kies installed
and the rom is CM9
and what i need to install to try to get into recovery from the computer?
i have a windows 7 64 bit
you will need the nexus s usb drivers http://nexusshacks.com/nexus-s-hacks/how-to-install-nexus-s-windows-usb-drivers/
If you have lost recovery try flashing the semaphore .tar version in Odin, that usually fixes it
the drivers not helped....
i didnt get the usb not recognized message..
i am connecting the usb and nothing happend.
Make sure you r in usb storage mode,
I'll try to recollect the remedy:
-Uninstall or disable Kies.
-put phone in download mode.
-connect usb from phone direct to pc, Do NOT use unpowered usb hub.
-open windows device manager and update phone drivers browsing to folder of extracted Nexus S usb drivers.
-disconnect usb.
-restart pc.
-while pc boot up, ask yourself:
Why didn't I do research?
-start Odin
-load latest Semaphore_ICS_1.2.6.tar kernel in PHONE field. Uncheck repartition.
-put sgs in download mode.
-connect usb and flash.
Check cable. Go to other comp and look if there is response about installing driver.
My milestone 2 is completed bricked and can't be recognized by PC. But I can log in the official recovery screen. I have downloaded a update.zip file from a link （not sure if it is an official link, as I can't find it through Motorola website). It prompted "signature error" when installed. Not sure anyone can provide an update.zip file, so that I can try if I can save my Milestone2. Thanks in advance!
as long as you can enter the stock recovery. your device isn't bricked. did you try to do a full wipe in stock recovery? did you try to use another usb port in bootloader mode? sometimes you get a black screen in bootloader mode, but you pc recognizese your device very well. did you install all drivers on your pc?
lulli1 said:
as long as you can enter the stock recovery. your device isn't bricked. did you try to do a full wipe in stock recovery? did you try to use another usb port in bootloader mode? sometimes you get a black screen in bootloader mode, but you pc recognizese your device very well. did you install all drivers on your pc?
Click to expand...
Click to collapse
1. I have tried full wipe, but didn't work. The machine reboot again and again;
2. I have tried another usb port, another PC and even another operating system (win7 and winXP), also didn't work.
3. I am sure I have installed the drivers, as PC can recognize my phone when it is OK before;
As I can only entered the official recovery screen, I think I can try if it worked when I update with an official update file. Anyway, thanks for your suggestions and reply!
hi,guy.i think you should do the curect usb driver for your pc recongnizing first. than choose a ringt bootlaoder offical ROM. curse your phone can login the rockrecovery screen means its ok! isn't?
I think the only way for you to get an update.zip is with another milestone 2 running froyo, that way you can update it via OTA, and before the phone reboots, take the update.zip from the /cache partition.
Sent from the U
As teh title says i am using v2.5.0.0 of this recovery rom for my samsung s4 device.
The issue is that i cannot mount my SD card whilst in recovery mode.
It never appears on my windows 8 machine when i connect my device in recovery mode.
I have all the usb drivers for my device installed and that is how i originally put a rom on it when i was running a stock rom.
Now that i did a wipe i obviously cannot mount my device on a normal running stock rom because its removed and i am trying to install a new one.
How can i access and transfer files whilst in recovery mode?
Do i need any additional drivers?
Still cant mount. i notice ond evide manager it says the drivers are missing for SAMSUNG_Android yet i have installed samsung kais!
jonneymendoza said:
As teh title says i am using v2.5.0.0 of this recovery rom for my samsung s4 device.
The issue is that i cannot mount my SD card whilst in recovery mode.
It never appears on my windows 8 machine when i connect my device in recovery mode.
I have all the usb drivers for my device installed and that is how i originally put a rom on it when i was running a stock rom.
Now that i did a wipe i obviously cannot mount my device on a normal running stock rom because its removed and i am trying to install a new one.
How can i access and transfer files whilst in recovery mode?
Do i need any additional drivers?
Click to expand...
Click to collapse
Uninstall KIES and any other samsung usb installed utilities first.
Then download the official Samsung USB drivers for windows here: http://developer.samsung.com/board/download.do?bdId=0000000700&attachId=0000000001
After all the uninstalls are done reboot computer and install the official samsung usb drivers.
Once that's done reboot computer one more time and then your phone should and will
recognize your phone unless you have a bad cable or a non-functioning usb port in computer.
Good luck!
Hello,
I have installed a custom rom (Marshmallow) for my SM-A500FU through the adb. Now when I want to install a different rom I have to either boot into TWRP and I can't do that because booting into recovery simply restarts a phone, or I have to boot into Download mode and install it with the adb. The problem is that when the system is running, the phone simply charges, no Windows notifications or devices appear and when the phone is in Download mode Windows detects that a device is plugged in but can't recognize it. I have all the adb drivers, KIES and all that so it's not a problem. Can I somehow boot into TWRP or make Windows recognize my phone so I can use adb?
Thanks.
before installing a rom, have you wiped system, cache, dalvik and data? If yes try with a hard reset and if it doesn't work, too flash stock firmware
Hey,
yes, I wiped everything, I have flashed many roms earlier and I believe I have flashed it properly. I have managed to get into TWRP so I can actually flash FWs. I have only updated my rom to the newest CW13 build there is for my A5. Is there any way to flash a stock FW (for example a XEO KitKat) without ODIN? I can only use ADB through TCPIP and TWRP, so there is no way for me to flash it through ODIN.
Thanks.
so, if you press power+home+vol- it doesn't reboot in download mode, right?
It does boot into the Download mode. The problem is that when I plug the phone into my PC in Download mode it says that the USB Device is not recognized in Windows with 'A request for the USB device descriptor failed' error. When I plug it in when the phone is booted normally into android, it just charges, Windows doesn't see it at all.
whzq said:
It does boot into the Download mode. The problem is that when I plug the phone into my PC in Download mode it says that the USB Device is not recognized in Windows with 'A request for the USB device descriptor failed' error. When I plug it in when the phone is booted normally into android, it just charges, Windows doesn't see it at all.
Click to expand...
Click to collapse
Well, you can't flash samsung firmwares with twrp. Try flashing another rom through twrp
Alright, I have tried to flash multiple ROMs. Currently sitting on a Lollipop. Nothing changed, though. On every single ROM the problem still persists. It's not a problem with the PC as I've tried to connect my A5 to a laptop with freshly installed Windows and KIES and it behaved the same way as on my PC. The cable is fine as well, I have tested it with my old SGS3, it worked just fine on both my PC and laptop. Frankly, I have no idea what to do next, I'm starting to think that the port is physically broken. It's weird though, as I can still charge my phone and there is a response when the phone is in Download mode, just that Windows can't recognize it.
Try with adb command "adb reboot recovery" if it doesn't work you can downlaod odin mobile from play store and flash stock firmware!
Do you have odin for windows ?
zyxw-androidiani said:
Try with adb command "adb reboot recovery" if it doesn't work you can downlaod odin mobile from play store and flash stock firmware!
Do you have odin for windows ?
Click to expand...
Click to collapse
Yes, ihlf his device can boot he can use mobile odin. Have you tried with other PCs, just to see it isn't a problem of your pc?
In my experience usb device descriptor errors are related to the specific PC the error occurs on due to device driver conflicts, but if you get the same error on another pc then it could be the hardware.
I'd certainly be trying another cable first on a fresh PC.
Anyway regardless of all that you can flash the stock firmware with FLASHFIRE available on play as long as you have root.
Sent from my SM-T280 using XDA-Developers mobile app
I am having the same problem as in this thread:
https://forum.xda-developers.com/showthread.php?t=2371548
The phone is stuck in a bootloop and is unable to mount /data.
But when I attach an USB cable, Windows says: "one of the usb devices attached to this computer has malfunctioned and windows doesn't recognize it"
I tried this on 3 different computers with Windows 10 and they all say the same.
I did everything: Another usb cable, usb port, drivers delete and uninstall and reinstall, samsung kies install and uninstall, but nothing works.
The phone is charging and sometimes it is vibrating, but other than that it does nothing. I tried to manually mount data, format data, flash a custom Rom, and everything by SD card, but nothing works and it keeps getting stuck on bootloop. The problem is I can't use Odin to flash the files manually, so how do I flash the files from http://d-h.st/PF5 with a SD card only?
Please help!
Edit:
Flashed CWM and stock ROM with SD card - but it says 'unable to mount /data' and it's still stuck in a bootloop
Windows says in device manager: device descriptor request failed
I tried flashing the files in http://d-h.st/PF5 with SD card, but that didn't work? Can anyone help me?
wouter00 said:
I am having the same problem as in this thread:
https://forum.xda-developers.com/showthread.php?t=2371548
The phone is stuck in a bootloop and is unable to mount /data.
But when I attach an USB cable, Windows says: "one of the usb devices attached to this computer has malfunctioned and windows doesn't recognize it"
I tried this on 3 different computers with Windows 10 and they all say the same.
I did everything: Another usb cable, usb port, drivers delete and uninstall and reinstall, samsung kies install and uninstall, but nothing works.
The phone is charging and sometimes it is vibrating, but other than that it does nothing. I tried to manually mount data, format data, flash a custom Rom, and everything by SD card, but nothing works and it keeps getting stuck on bootloop. The problem is I can't use Odin to flash the files manually, so how do I flash the files from http://d-h.st/PF5 with a SD card only?
Please help!
Edit:
Flashed CWM and stock ROM with SD card - but it says 'unable to mount /data' and it's still stuck in a bootloop
Windows says in device manager: device descriptor request failed
I tried flashing the files in http://d-h.st/PF5 with SD card, but that didn't work? Can anyone help me?
Click to expand...
Click to collapse
Download samsung driver and download official stock from sammobile and flash using odin good luck