I purchased a galaxy s i9000 on ebay, it is currently running 2.2.1. I would like to root it and put an ICS rom on it. could sombody point me in the right direction, i keep finding small guides but they just take me to boot loops!
Currently running GT_I9000_XWJSD_XXJPY_OXXJS6 if that means anything lol.
Thanks
cogman123 said:
I purchased a galaxy s i9000 on ebay, it is currently running 2.2.1. I would like to root it and put an ICS rom on it. could sombody point me in the right direction, i keep finding small guides but they just take me to boot loops!
Currently running GT_I9000_XWJSD_XXJPY_OXXJS6 if that means anything lol.
Thanks
Click to expand...
Click to collapse
1.download Kies to make official download with .sbl
2.connect ur phone with kies and upgrade ur phone to GB 2.3.6 I9000XWJW5/I9000LUXJV3/I9000XXJW4/I9000XWJW5
3.download semaphore 2.7.4 to root ur mobile .
4.download ur ICS or JB rom move it to ur SD enter recovery mode and flash it
the other way is
5.find Ramad's post with rom collection download JVU rom with .SBL turn off kies . open odin and use the files as description of Ramad's post says
repeat #3
repeat #4
Related
Hello,
I am using Samsung Galaxy S I9000.. It is running on firmware 2.1 Eclair..
I want to upgrade it to Froyo 2.2.. I heard the JPA is fastest rom available for Galaxy S..
Please suggest me the best ROM to install on my galaxy s for speed and performance..
The baseband my phone has - I9000DDJG4
Please help me, how can I upgrade my phone to Froyo 2.2.. I've seen lots of ROM available in Android development section but don't know whether they support my mobile or not.
you need 20 minutes
1. 3br fix if not working, easy one from Richtrofen - flash bootloader with odin. (most risky part, but I do not find post with bricked phone when you patch both bootloaders at once), for me worked well
2. instal z4 root to root your phone
3. instal terminal and backup /efs folder
4. instal rom manager and download Doc rom v9 and instal it
Very stable and great rom, for the first time my gps is not lost every few kilometres
Sent from my GT-I9000 using Tapatalk
Hey guys
I'm running the P1000JXJJ1, FroYo JPJJ2 firmware on my Tab, and samfirmware states P1000JVJL1 is the latest one !
so I was advised NOT to use KIES, and ODIN was better !!
My tab is rooted with OCLF set, Just a quick question, Odin will delete all my data and also I believe that I'd have to re-ROOT the device right?
another question is since I didn't have market out of the box, the product sales code has been changed to XSG.
thanks a lot guys in advance
Cheers
Jackie
if u use oclf, undo oclf b4 update firmware, kies or odin works fine for me, i'll only use odin when i screw up with my tab
and will I have to re root the device and also will ODIN delete all my data?
Hi,
searching for something else I accidentily found this thread.
Maybe my experince might be of any interest: got the galaxy tab 3 days ago, installed KIES and instantly got a message to update the firmware to Froyo JK5. I followed the suggestion to save my data which I regret later, because it took very long (had already copied a lot of videos to the internal sd) and couldn´t stop it. To cut it short:
the update was successful and nothing deleted, just everything in place. Also synchronized Outlook contacts, though at 96% it got stuck - waited a few minutes, then broke up and all contacts had been transferred fine.
(don´t know, if firmware is different for other countries...)
Odin will not delete your data if you did not choose to repartition, no need to use pit file to repartition if you are just upgrading fw from the same region..safest is still via KIES
To correct some mis-information from above. Flashing with Odin can delete your data, it depends on what components are included in the image you flash. If you flash an official ROM with Kies you should not loose your data but there is always a risk of an issue occurring during any flash that could lead to data loss. Unless you flash a pre-rooted custom ROM you will loose root and SU during a flash. These can be re-applied easily to the SGT using the Super One-Click method.
Redardless of what flashing method you use, if you use RyanZA's OCLF you must undo the lag fix before you flash, otherwise you will certainly loose data and possibly end up with a corrupt system that won't boot (I had first hand experience of this early on in my flashing days with my SGS!). You shouldn't really need to apply a lagfix to the SGT as it doesn't seem to suffer from the same lag as the SGS.
Finally, flashing with Odin can lead to product code being changed, especially if the ROM you flash isn't intended for the normal product code of your device. There are various ways to restore your poduct code, look in the Samsung Galaxy S forums for suggestions on how to do this as the basic construction of the ROMs is very similar between the two devices from that point of view. Also, be aware that people with SGS devices have reported loosing their IMEI while flashing with Odin. If this happens you will end up with a WiFi only device unless you backed up your /efs folder before you flashed. There's lots of info in the SGS forums about this and it's worth a read if you are new to flashing. I haven't heard of anyone with a SGT loosing their IMEI yet but it's worth taking precautions.
Happy flashing folks!!
thanks a bunch guys, I'm now running the latest version !!
was just trying to install the latest gingerbread theme from the forums !! will let you all know how that went
hi guyz,..
im from malaysia and currently using galaxy S and galaxy sl for my wife (not tabs) but i've been request by my brother who owned the galaxy tabs to upgrade it since i had some knowledge..
currently his tabs running on 2.2 stock asia version.and i wanted to flash the latest version 2.3.3 europe edition since i saw many custom rom on it..i've download the latest firmware that is P1000DXJPE ## via samfirmware.com and could not find any pit,csc and modem file..
my question,
1. am i missing something here?
2. is it possible to flash without pit,csc and modem?
3. i know how to flash the file using pda since i've done it with my SGSL but before that i need to flash another old version firmware to used it.is it the same with galaxy tabs?
azamnecrone said:
hi guyz,..
im from malaysia and currently using galaxy S and galaxy sl for my wife (not tabs) but i've been request by my brother who owned the galaxy tabs to upgrade it since i had some knowledge..
currently his tabs running on 2.2 stock asia version.and i wanted to flash the latest version 2.3.3 europe edition since i saw many custom rom on it..i've download the latest firmware that is P1000DXJPE ## via samfirmware.com and could not find any pit,csc and modem file..
my question,
1. am i missing something here?
2. is it possible to flash without pit,csc and modem?
3. i know how to flash the file using pda since i've done it with my SGSL but before that i need to flash another old version firmware to used it.is it the same with galaxy tabs?
Click to expand...
Click to collapse
Go to the Android Development section.
Look up Overcome and BOCA for the Galaxy Tab. Both a great however I prefer BOCA. The current release is 2.3.4 but 2.3.7 is in the works.
If you follow the instructions for BOCA you will have a GTab that feels like it was newly born again.
boxhead72 said:
Go to the Android Development section.
Look up Overcome and BOCA for the Galaxy Tab. Both a great however I prefer BOCA. The current release is 2.3.4 but 2.3.7 is in the works.
If you follow the instructions for BOCA you will have a GTab that feels like it was newly born again.
Click to expand...
Click to collapse
thanks dude!
so i dont need to flash stock gingerbread 2.3.3 to used this custom rom?a bit confuse here...
boxhead72 said:
Go to the Android Development section.
Look up Overcome and BOCA for the Galaxy Tab. Both a great however I prefer BOCA. The current release is 2.3.4 but 2.3.7 is in the works.
If you follow the instructions for BOCA you will have a GTab that feels like it was newly born again.
Click to expand...
Click to collapse
Yes. Follow the instructions on the magrathea site or overcome
Use overcome instructions to instal stock GB 5. It tells you the pit and modem to use for your tab.
Then install the overcome kernel and reboot. It will root the tab and format the storage.
Then you install the Boca zip over the overcome kernel.
If you just want overcomes Rom follow their instructions. They make it simple
Sent from my GT-P1000 using XDA App
is that all??hmm,
will try donload all the files 1st,then i will try
thanks guyz for da info..
so i dont need to flash stock rom like i always do with my SGS before installing any custom rom?
hi [email protected]!!
i have N7000 default firmware version is N7000UBKK1 İTS 2.3.6 i want to upgrade it to ICS but when i try with kies it says ur device not support update via kies.so can anybody advice me step by step how can i upgrade my set without any problem.(also ics version have to contain turkish language)
thx in advance..
Just use Odin dude, there may not be an official update to ICS for your region yet.
But you can use Odin to update your device using one of the ROMs from other regions. Just depends on whether they have your language or not included in the ROM.
Also I'd aside you use a custom kernel, you will have to use an app called triangle away afterwards but it's safer than using the current official kernels that could potentially brick your device.
Sent from my GT-N7000 using Tapatalk 2
but 1 month ago i face the same problem on a galaxy s2 i try it with odin flashing was well but after i test the phone i see some problems like not detecting sim card , some menus missing , also no restart menu when hold power button.also im afraid about when i downgrade the s2 back to 2.3.6 it doesnt work too well some times shut down automaticlly after this progress.so i need the best ways to upgrade my note without any problem.
B.R
I suggest you leave it as it is for now ,for two reasons:
1.flashing is normally dangerous and could brick your phone ,you need to read and learn your way around a safe flash .
2.stock ICS for the note is buggy and could brick your phone if you preform a wipe/factory reset on it ,this would mean that you need a safe custom kernel to render it safely ,thus making the operation that much more difficult for you to do.
hi first thx 4 your anwser ,but i dont have problem about flashing etc im not a new bie (im also moderator on gsm hosting) just show me steps ang give me the best files for my device
B.R
or just tell me how can i make able to update my phone via kies
Unknown® said:
hi first thx 4 your anwser ,but i dont have problem about flashing etc im not a new bie (im also moderator on gsm hosting) just show me steps ang give me the best files for my device
B.R
Click to expand...
Click to collapse
I assumed from your post count ,and your way of asking that you are a noob, sorry if I'm mistaken.
anyway if you want to flash ICS ,then I suggest :
1.flash cm9 as it is safe and fully functional (aside from sammy apps)
http://forum.xda-developers.com/showthread.php?t=1627854
2.flash a stock ICS ROM using mobile odin ,and replacing the kernel with either Franco r6 ,or Speedmod
these two kernels are assumed safe ,so you should have no problems.
good luck
I currently have a Samsung Galaxy S GT i9000M Model and I wanna root it so I can have the newest firmware and cool features etc...
I have Odin installed and I know how to make my phone is detected in ODIN via USB (in download mode)
Before going any further and destroying my phone I wanna know some step by step for rooting my phone.
Like , I know nothing of the process... Could someone provide some good recent tutorial with the newest (not Beta) firmware I can get ?
My phone is currently 100% Stock.
Let me know If you have any advices, or good links to provide me...
N/B. Obviously I did some researchs... All I found so far are tutorials that says like : Your phone must be already running X.XX version (which are not supported on the s1) and be Rooted. Nothing really helpful for my stock galaxy.
Thx in advance
cyboirette said:
I currently have a Samsung Galaxy S GT i9000M Model and I wanna root it so I can have the newest firmware and cool features etc...
I have Odin installed and I know how to make my phone is detected in ODIN via USB (in download mode)
Before going any further and destroying my phone I wanna know some step by step for rooting my phone.
Like , I know nothing of the process... Could someone provide some good recent tutorial with the newest (not Beta) firmware I can get ?
My phone is currently 100% Stock.
Let me know If you have any advices, or good links to provide me...
N/B. Obviously I did some researchs... All I found so far are tutorials that says like : Your phone must be already running X.XX version (which are not supported on the s1) and be Rooted. Nothing really helpful for my stock galaxy.
Thx in advance
Click to expand...
Click to collapse
if you are a new member read the stickies first, that's how forums work
http://forum.xda-developers.com/showthread.php?t=1379853
[HOWTO] [REF] [FAQ] [Guides] [Tutorials] Flash/Root/ADB/ROM [MUST READ!]
http://forum.xda-developers.com/showthread.php?t=723596
Yeah for rooting I think its best to leave someone alone for that, if you can't figure out how to root the phone then you should prob not be messing with it in the first place.
Just read the sticky notes and they are pretty easy to explain how to do it.
http://forum.xda-developers.com/showthread.php?t=788108
yes,good luck.
cyboirette said:
I currently have a Samsung Galaxy S GT i9000M Model and I wanna root it so I can have the newest firmware and cool features etc...
I have Odin installed and I know how to make my phone is detected in ODIN via USB (in download mode)
Before going any further and destroying my phone I wanna know some step by step for rooting my phone.
Like , I know nothing of the process... Could someone provide some good recent tutorial with the newest (not Beta) firmware I can get ?
My phone is currently 100% Stock.
Let me know If you have any advices, or good links to provide me...
N/B. Obviously I did some researchs... All I found so far are tutorials that says like : Your phone must be already running X.XX version (which are not supported on the s1) and be Rooted. Nothing really helpful for my stock galaxy.
Thx in advance
Click to expand...
Click to collapse
I have a M version and i can tell you, it doesnt matter. All canadian models of phones are VERY close to international, so you can use all their guides.
So to root:
1. Download either devil kernel or semaphore .tar file from respective threads. Flash them under PDA in odin, no re-partition. Leave everything else.
2. Your phone will not boot, DONT WORRY. Since recoveries are packaged with the kernel on this phone, all we are after is the custom recovery. We dont need the phone to boot.
3. Download Cyanogenmod 9 nightly/rc2. They are virtually bug free and not beta.
4. Flash it from your custom recovery!
5. Now when you flash cm9, it will change your baseband. You will have horrid signal, so flash back to a KG3 modem. You can find it, there is a big thread. And if the modem says nexus s cm7/9, its okay, it will work.
6. Wipe Data/factory Reset from recovery.
7. Have fun with it
Well I feel dumb to say this but I bought my S4 last week and already Bricked it.
It is an I9505 with ME7 firmware. I did some easy root way using a formatted SD card so haven't flashed and files before.
Anyways now to the dumb part, I was bored and work and installed chainfire 3d without reading all of the info just saw it had good rating I obviously now know it is not made for a newer phone so I feel really stupid.
So my Verizon S4 is locked up and wont load past the Verizon screen. I have goggled the problem and that is what brought me to this website. A lot of great information here but I figured I would make a thread for help and make sure I understand everything right before I try anything from now on.
The search bought me to this page being the way to fix it.
http://forum.xda-developers.com/showthread.php?t=2250824
Now I have read though it all but there are so many links that it just confused me on witch one to download and install to fix the device. I dont mind if the phone gets fully wiped or stays rooted/doesn't. Just want to be able to use it and read up and learn more. I would be most interested on a root that has the least bloatware
So basically I am asking if that that link is the fix to my problem and what download/rom should I use. Do I download a Original Stock ROM or Pre-Rooted ROM? Then put my phone in download mode and use ODIN
Thanks
Steelers743 said:
Well I feel dumb to say this but I bought my S4 last week and already Bricked it.
It is an I9505 with ME7 firmware. I did some easy root way using a formatted SD card so haven't flashed and files before.
Anyways now to the dumb part, I was bored and work and installed chainfire 3d without reading all of the info just saw it had good rating I obviously now know it is not made for a newer phone so I feel really stupid.
So my Verizon S4 is locked up and wont load past the Verizon screen. I have goggled the problem and that is what brought me to this website. A lot of great information here but I figured I would make a thread for help and make sure I understand everything right before I try anything from now on.
The search bought me to this page being the way to fix it.
http://forum.xda-developers.com/show....php?t=2250824
Now I have read though it all but there are so many links that it just confused me on witch one to download and install to fix the device. I dont mind if the phone gets fully wiped or stays rooted/doesn't. Just want to be able to use it and read up and learn more. I would be most interested on a root that has the least bloatware
So basically I am asking if that that link is the fix to my problem and what download/rom should I use. Do I download a Original Stock ROM or Pre-Rooted ROM? Then put my phone in download mode and use ODIN
Thanks
Click to expand...
Click to collapse
You should be able to recover if you can flash the original stock rom back on there but not too sure about Verizon S4 as I have an international S4,. I would be flashing the stock rom in your situation.
Someone else who has the Verizon variant might answer if there isn't a forum for it.
So would flashing the stock 4.3 ROM void my warranty it was running 4.2.2 I believe? And just to verify this would be the link I want to use? Original Stock ROM (see below)
Or would a 4.2.2 original stock rom be better?
Model: GT-I9505 (4.3)
PDA: JSS15J.XXUEMI8
PHONE: XXUEMI8
CSC: OXAEMI8 (8 codes)
Kernel: 3.4.0-1715731 (20.09)
Bootloader FREE!!
FULL WIPE ROM!! BACK UP YOUR DATA!!
Leaked/TEST FW
Device Status - CUSTOM
KNOX WARRANTY VOID 0x1
Build Date: 20.09.2013
Changelist: 1715731
Original Stock ROM: Download: <<< Hotfile >>>
Stock KERNEL: Downloads: <<< Android Host >>>
Stock RECOVERY: Downloads: <<< Android Host >>>
Pre-Rooted ROM: Odex - FULL - Downloads: <<< Android Host >>>
Original (Reversible*) BOOTLOADER** - DOWNLOAD
* - Reversible back to 4.2.2 - XXUDMGG and newer FW's with KNOX Bootloader!!
Impossible to downgrade back to XXUBMH1 or older FW's!!
** - open in Odin as BL/Bootloader and flash it ONLY if you have WiFi or sound issues!!
NOTE:
I've prepared a special package for all who are using ODEX version (ORIGINAL) and decided to try DEODEX instead...
Quick guide:
1. Download "DEODEXED Apps+Framework" package (THIS IS NOT ROM!!!): ANDROID HOST
2. Extract, open folder and click on "DEODEX_ME". (DO NOT TOUCH ANYTHING in System folder unless you know what you're doing!!)
3. Connect phone (with USB Debugging Enabled) and accept connection
4. Wait..... all files will be transferred to internal SD...
5. Accept SuperSU request for ADB Shell and wait.... phone will restart automatically
6. Enjoy your DeOdexed SuperSlim Version!
BIG THANKS and CREDITS goes to @A.S._id for this great tool!!
Click to expand...
Click to collapse
Go to sammobile.com for the stock firmware. Voiding your warranty is the least of your worries. Flashing the stock will not void it.