Hi All,
My UK model Tab2 10.1 purchased fully unlocked , has the following:
Baseband: P5100XXLE4
Build : P5100XWBLF1 (4.0.4 firmware build).
I want to try Jelly bean, but I need to be able to get back to XWBLF1 in the event of problems.
I cant find a downloadable image of it, by any of the usual suspects(e.g. samfirmwares) to flash back with odin
I cant find a tool that will "reverse odin" my XWBLF1 firmware to my pc so I can revert if necessary in the future.
Can anyone either point me in the direction of an appropriate image or firmware backup tool please ?
Many thanks in advance
CQU
mw0cqu said:
Hi All,
My UK model Tab2 10.1 purchased fully unlocked , has the following:
Baseband: P5100XXLE4
Build : P5100XWBLF1 (4.0.4 firmware build).
I want to try Jelly bean, but I need to be able to get back to XWBLF1 in the event of problems.
I cant find a downloadable image of it, by any of the usual suspects(e.g. samfirmwares) to flash back with odin
I cant find a tool that will "reverse odin" my XWBLF1 firmware to my pc so I can revert if necessary in the future.
Can anyone either point me in the direction of an appropriate image or firmware backup tool please ?
Many thanks in advance
CQU
Click to expand...
Click to collapse
Hi
the best solution before to try anything else is to root the device and use cwm to perform a nandroid backup
so you could roll back to your stock rom in all case
in the Galaxy Tab 2 10.1" Android Development section u can find all information how to root the device and upgrade to jb
bye
Related
Hey guys
I'm running the P1000JXJJ1, FroYo JPJJ2 firmware on my Tab, and samfirmware states P1000JVJL1 is the latest one !
so I was advised NOT to use KIES, and ODIN was better !!
My tab is rooted with OCLF set, Just a quick question, Odin will delete all my data and also I believe that I'd have to re-ROOT the device right?
another question is since I didn't have market out of the box, the product sales code has been changed to XSG.
thanks a lot guys in advance
Cheers
Jackie
if u use oclf, undo oclf b4 update firmware, kies or odin works fine for me, i'll only use odin when i screw up with my tab
and will I have to re root the device and also will ODIN delete all my data?
Hi,
searching for something else I accidentily found this thread.
Maybe my experince might be of any interest: got the galaxy tab 3 days ago, installed KIES and instantly got a message to update the firmware to Froyo JK5. I followed the suggestion to save my data which I regret later, because it took very long (had already copied a lot of videos to the internal sd) and couldn´t stop it. To cut it short:
the update was successful and nothing deleted, just everything in place. Also synchronized Outlook contacts, though at 96% it got stuck - waited a few minutes, then broke up and all contacts had been transferred fine.
(don´t know, if firmware is different for other countries...)
Odin will not delete your data if you did not choose to repartition, no need to use pit file to repartition if you are just upgrading fw from the same region..safest is still via KIES
To correct some mis-information from above. Flashing with Odin can delete your data, it depends on what components are included in the image you flash. If you flash an official ROM with Kies you should not loose your data but there is always a risk of an issue occurring during any flash that could lead to data loss. Unless you flash a pre-rooted custom ROM you will loose root and SU during a flash. These can be re-applied easily to the SGT using the Super One-Click method.
Redardless of what flashing method you use, if you use RyanZA's OCLF you must undo the lag fix before you flash, otherwise you will certainly loose data and possibly end up with a corrupt system that won't boot (I had first hand experience of this early on in my flashing days with my SGS!). You shouldn't really need to apply a lagfix to the SGT as it doesn't seem to suffer from the same lag as the SGS.
Finally, flashing with Odin can lead to product code being changed, especially if the ROM you flash isn't intended for the normal product code of your device. There are various ways to restore your poduct code, look in the Samsung Galaxy S forums for suggestions on how to do this as the basic construction of the ROMs is very similar between the two devices from that point of view. Also, be aware that people with SGS devices have reported loosing their IMEI while flashing with Odin. If this happens you will end up with a WiFi only device unless you backed up your /efs folder before you flashed. There's lots of info in the SGS forums about this and it's worth a read if you are new to flashing. I haven't heard of anyone with a SGT loosing their IMEI yet but it's worth taking precautions.
Happy flashing folks!!
thanks a bunch guys, I'm now running the latest version !!
was just trying to install the latest gingerbread theme from the forums !! will let you all know how that went
hi guyz,..
im from malaysia and currently using galaxy S and galaxy sl for my wife (not tabs) but i've been request by my brother who owned the galaxy tabs to upgrade it since i had some knowledge..
currently his tabs running on 2.2 stock asia version.and i wanted to flash the latest version 2.3.3 europe edition since i saw many custom rom on it..i've download the latest firmware that is P1000DXJPE ## via samfirmware.com and could not find any pit,csc and modem file..
my question,
1. am i missing something here?
2. is it possible to flash without pit,csc and modem?
3. i know how to flash the file using pda since i've done it with my SGSL but before that i need to flash another old version firmware to used it.is it the same with galaxy tabs?
azamnecrone said:
hi guyz,..
im from malaysia and currently using galaxy S and galaxy sl for my wife (not tabs) but i've been request by my brother who owned the galaxy tabs to upgrade it since i had some knowledge..
currently his tabs running on 2.2 stock asia version.and i wanted to flash the latest version 2.3.3 europe edition since i saw many custom rom on it..i've download the latest firmware that is P1000DXJPE ## via samfirmware.com and could not find any pit,csc and modem file..
my question,
1. am i missing something here?
2. is it possible to flash without pit,csc and modem?
3. i know how to flash the file using pda since i've done it with my SGSL but before that i need to flash another old version firmware to used it.is it the same with galaxy tabs?
Click to expand...
Click to collapse
Go to the Android Development section.
Look up Overcome and BOCA for the Galaxy Tab. Both a great however I prefer BOCA. The current release is 2.3.4 but 2.3.7 is in the works.
If you follow the instructions for BOCA you will have a GTab that feels like it was newly born again.
boxhead72 said:
Go to the Android Development section.
Look up Overcome and BOCA for the Galaxy Tab. Both a great however I prefer BOCA. The current release is 2.3.4 but 2.3.7 is in the works.
If you follow the instructions for BOCA you will have a GTab that feels like it was newly born again.
Click to expand...
Click to collapse
thanks dude!
so i dont need to flash stock gingerbread 2.3.3 to used this custom rom?a bit confuse here...
boxhead72 said:
Go to the Android Development section.
Look up Overcome and BOCA for the Galaxy Tab. Both a great however I prefer BOCA. The current release is 2.3.4 but 2.3.7 is in the works.
If you follow the instructions for BOCA you will have a GTab that feels like it was newly born again.
Click to expand...
Click to collapse
Yes. Follow the instructions on the magrathea site or overcome
Use overcome instructions to instal stock GB 5. It tells you the pit and modem to use for your tab.
Then install the overcome kernel and reboot. It will root the tab and format the storage.
Then you install the Boca zip over the overcome kernel.
If you just want overcomes Rom follow their instructions. They make it simple
Sent from my GT-P1000 using XDA App
is that all??hmm,
will try donload all the files 1st,then i will try
thanks guyz for da info..
so i dont need to flash stock rom like i always do with my SGS before installing any custom rom?
I currently have a Samsung Galaxy S GT i9000M Model and I wanna root it so I can have the newest firmware and cool features etc...
I have Odin installed and I know how to make my phone is detected in ODIN via USB (in download mode)
Before going any further and destroying my phone I wanna know some step by step for rooting my phone.
Like , I know nothing of the process... Could someone provide some good recent tutorial with the newest (not Beta) firmware I can get ?
My phone is currently 100% Stock.
Let me know If you have any advices, or good links to provide me...
N/B. Obviously I did some researchs... All I found so far are tutorials that says like : Your phone must be already running X.XX version (which are not supported on the s1) and be Rooted. Nothing really helpful for my stock galaxy.
Thx in advance
cyboirette said:
I currently have a Samsung Galaxy S GT i9000M Model and I wanna root it so I can have the newest firmware and cool features etc...
I have Odin installed and I know how to make my phone is detected in ODIN via USB (in download mode)
Before going any further and destroying my phone I wanna know some step by step for rooting my phone.
Like , I know nothing of the process... Could someone provide some good recent tutorial with the newest (not Beta) firmware I can get ?
My phone is currently 100% Stock.
Let me know If you have any advices, or good links to provide me...
N/B. Obviously I did some researchs... All I found so far are tutorials that says like : Your phone must be already running X.XX version (which are not supported on the s1) and be Rooted. Nothing really helpful for my stock galaxy.
Thx in advance
Click to expand...
Click to collapse
if you are a new member read the stickies first, that's how forums work
http://forum.xda-developers.com/showthread.php?t=1379853
[HOWTO] [REF] [FAQ] [Guides] [Tutorials] Flash/Root/ADB/ROM [MUST READ!]
http://forum.xda-developers.com/showthread.php?t=723596
Yeah for rooting I think its best to leave someone alone for that, if you can't figure out how to root the phone then you should prob not be messing with it in the first place.
Just read the sticky notes and they are pretty easy to explain how to do it.
http://forum.xda-developers.com/showthread.php?t=788108
yes,good luck.
cyboirette said:
I currently have a Samsung Galaxy S GT i9000M Model and I wanna root it so I can have the newest firmware and cool features etc...
I have Odin installed and I know how to make my phone is detected in ODIN via USB (in download mode)
Before going any further and destroying my phone I wanna know some step by step for rooting my phone.
Like , I know nothing of the process... Could someone provide some good recent tutorial with the newest (not Beta) firmware I can get ?
My phone is currently 100% Stock.
Let me know If you have any advices, or good links to provide me...
N/B. Obviously I did some researchs... All I found so far are tutorials that says like : Your phone must be already running X.XX version (which are not supported on the s1) and be Rooted. Nothing really helpful for my stock galaxy.
Thx in advance
Click to expand...
Click to collapse
I have a M version and i can tell you, it doesnt matter. All canadian models of phones are VERY close to international, so you can use all their guides.
So to root:
1. Download either devil kernel or semaphore .tar file from respective threads. Flash them under PDA in odin, no re-partition. Leave everything else.
2. Your phone will not boot, DONT WORRY. Since recoveries are packaged with the kernel on this phone, all we are after is the custom recovery. We dont need the phone to boot.
3. Download Cyanogenmod 9 nightly/rc2. They are virtually bug free and not beta.
4. Flash it from your custom recovery!
5. Now when you flash cm9, it will change your baseband. You will have horrid signal, so flash back to a KG3 modem. You can find it, there is a big thread. And if the modem says nexus s cm7/9, its okay, it will work.
6. Wipe Data/factory Reset from recovery.
7. Have fun with it
I have Samsung Galaxy Note 3 SCL22 from au japan.
I have unlocked it before using service mode (*#0011#) when it was on Kitkat 4.4.2.
But after I updated it on Lollipop 5.0 I cannot unlock it using service mode because there is no menu anymore it is just end.
Is there any other code or way to access service mode.
Any other way to sim unlock my phone? THANKS!
Same problem here
Any solution pls
SCL22 on Lollipop
Same problem here, cant access the Service Menu and Can't use any sim in the Philippines.
Please somebody help us.
Probably found a solution in a Japanese forum. Though I haven't understand it fully (with google translate), but it can be something like this.
Do not upgrade the firmware from your phone (If you already did, then you can re-install it again with following procedure).
Instead download the official SCL22 Lollipop firmware from sammobile.com or somewhere else in your PC.
Extract the firmware and add "ServiceModeApp_RIL.apk" in /system/app/ directory. Probably we need to google a bit on how to rebuild a firmware. A starting point can be http://forum.xda-developers.com/showthread.php?t=2138885
Then install the firmware using Odin.
After installation, follow the unlock instruction for Kitkat 4.3, which I think you know already. They are also available in the Japanese forum too.
http://www.neko.ne.jp/~freewing/android/au_scl22_galaxy_note3_sim_unlock/
Note: The ServiceModeApp_RIL.apk download link is given in the Japanese forum. Or I think it can be extracted from the Kitkat 4.3 firmware files too. Once I followed this post (http://allthec.blogspot.com/2014/11/how-to-root-samsung-galaxy-note-3-scl22.html) to root my SCL22 Kitkat 4.4.2 which is specific to SCL22 only and very easy to follow, this should work for Lollipop 5.0 too, if you are interested to root your device. But rooting the device will not unlock the phone.
I haven't tried it in my phone yet. Can any of you try it and let us know how it goes. Hopefully it will work!
Awesome
Thanks tutul.net, I will try that out.
And the translation is terrible so I'll try with the little japanese I can read:
First Method:
・Using odin flash SCL22KDU2FNF7
・Unlock using the SCL22KDU2FNF7 method
・Dont upgrade past SCL22KDU2FNF7
Second Method:
・Using Odin only flash the SCL22KDU2FNF7 modem
・Extract the old version of the ServiceModeApp_RIL.apk and overwrite the new one (/system/app/ServiceModeApp_RIL.apk)
・Using the Service menu, *#0011#, unlock with the old method
Now that I actually wrote all that out, looks like you were spot on. Thanks again!
I have had a note.3 as a paper weight for about a year now, maybe your advice will finally let me use it.
Also it was kind of biatch to get that apk, so I reupped it somewhere else for convenience hope it helps someone: ServiceModeApp_RL.zip
I'm having trouble with this and it's getting me really frustrated... did you eventually get it to work?
can you just flash the modem? isn't the modem supposed to be .bin file?
if you were able to successfully rebuild the rom with the fix, it would help me greatly if you can upload it somewhere
any help is appreciated
Did anyone manage to do this?
Basically you need a Linux base PC to rebuild a tar.md5
See links below for details:
http://forum.xda-developers.com/showthread.php?t=2138885&page=3
http://www.rwilco12.com/forum/showthread.php?tid=74
http://forum.xda-developers.com/showthread.php?t=2154762
http://www.rwilco12.com/forum/showthread.php?tid=92
http://forum.xda-developers.com/showthread.php?t=1750295
https://github.com/EpicAOSP/make_ext4
tutul.net said:
Probably found a solution in a Japanese forum. Though I haven't understand it fully (with google translate), but it can be something like this.
Do not upgrade the firmware from your phone (If you already did, then you can re-install it again with following procedure).
Instead download the official SCL22 Lollipop firmware from sammobile.com or somewhere else in your PC.
Extract the firmware and add "ServiceModeApp_RIL.apk" in /system/app/ directory. Probably we need to google a bit on how to rebuild a firmware. A starting point can be http://forum.xda-developers.com/showthread.php?t=2138885
Then install the firmware using Odin.
After installation, follow the unlock instruction for Kitkat 4.3, which I think you know already. They are also available in the Japanese forum too.
http://www.neko.ne.jp/~freewing/android/au_scl22_galaxy_note3_sim_unlock/
Note: The ServiceModeApp_RIL.apk download link is given in the Japanese forum. Or I think it can be extracted from the Kitkat 4.3 firmware files too. Once I followed this post (http://allthec.blogspot.com/2014/11/how-to-root-samsung-galaxy-note-3-scl22.html) to root my SCL22 Kitkat 4.4.2 which is specific to SCL22 only and very easy to follow, this should work for Lollipop 5.0 too, if you are interested to root your device. But rooting the device will not unlock the phone.
I haven't tried it in my phone yet. Can any of you try it and let us know how it goes. Hopefully it will work!
Click to expand...
Click to collapse
Hey, may I know if you have successfully rebuild the tar.md5? I think it will need a Linux Ubunto based PC to do this (see links I post below)
I have the same problem with my phone. Has anyone succeeded trying to unlock the service mode menu??
is there any update to this? i tried to install service mode ril but it says app not installed can someone help me?
xPritz said:
is there any update to this? i tried to install service mode ril but it says app not installed can someone help me?
Click to expand...
Click to collapse
have you try to unlock using custom firmware for scl22 5.0..
ive already done it and its working..
Help me please. i'm in a serious mess, I tried to Flash Custom Rom to my Samsung galaxy J3. After Flashed, phone does not on.
Now i want to go back to Stock Rom .. No need any custom rom anymore
Can any one please give me Stock Rom to my phone J3109 .. and .. can i use Sp Flash tool? I have a dout about that
dias12 said:
Help me please. i'm in a serious mess, I tried to Flash Custom Rom to my Samsung galaxy J3. After Flashed, phone does not on.
Now i want to go back to Stock Rom .. No need any custom rom anymore
Can any one please give me Stock Rom to my phone J3109 .. and .. can i use Sp Flash tool? I have a dout about that
Click to expand...
Click to collapse
Google search for:
"Return to stock J3109"
Or
"Stock firmware for J3109"
You'll probably find it at Sammobile .com or samsung-updates .com.
Then do a Google search for
"How to flash stock firmware in Odin"
Make sure you get the newest version of stock or at least the version equal to yours but not any that are older than what you already had.
If your device does not boot but does vibrate when you press power then you can get a debrick.img from someone with your exact model number that has a rooted device using terminal emulator to retrieve the debrick.img from their while it is on stock firmware. Then you can find instructions for unbricking Samsung devices using an SD card to boot from.
Sent from my SCH-I535 using Tapatalk
Hi community I just need help to figure out what to do with my Tab 4 7.0 the history begins this way:
I get this Tablet already used not brand new it looked to have Android Lollipop 5.1.1 when I got it and didn't appear suspicious and lend it to one of my kids, the problem begins after some time the Tablet didn't connect to the Play Store anymore proly because my kids was trying to root it via KingoRoot or other apps to mess with some games, so after that I decided to solve the problem doing a Hard Reset but it didn't work, the tablet still can't connect to the PlayStore via RH-01 error message.
So I decided to flash it with the official stockl rom from Samsung, my BIG surprise is that this Tablet never get Lollipop 5.1.1 it didn't ever get Lollipop at all accordingly to this thread: https://forum.xda-developers.com/tab-4/general/links-galaxy-tab-4-official-lollipop-5-t3102844
Because my tablet is the SM-T230NU (the model accordingly to the box is SM-T230NYKAXAR) model and that model never gets LL, so I figure it out this was a modified rom? Even in the Info about the device over settings it says the model of the device i "Nexus 5" instead of Tab 4 or whatever Samsung call this device but not Nexus 5 that is a phone from LG.
So I stopped here, because I've heard it can be dangerous to Downgrade Android versions? If not what should I do? Use Odin3 and flash the rom mentioned in this thread: https://forum.xda-developers.com/tab-4/general/links-stock-galaxy-tab-4-firmware-t3013128
For the T230NU USA variant? Hope u can advice me about what to do and give some tips because this will be my first flash on a device.
Thanks in advance! :laugh::good:
They probably flashed a custom rom with broken GAPPS, just restore with Odin and the official rom.
Pix12 said:
They probably flashed a custom rom with broken GAPPS, just restore with Odin and the official rom.
Click to expand...
Click to collapse
By restore u mean flash it with some of the roms provided in this link: https://forum.xda-developers.com/tab...mware-t3013128
So there's no problem if I have 5.1.1 right now and get down to 4.2 as is the official one?