Database Users

Please Help! PC won't detect HD2

Hello
I've got an HTC HD2 tmo US...
When I plug in the sync cable from the phone to the PC, simply nothing happens.
The phone charges but Mobile Device Center shows not connecting and nothing about detecting hardware or anything, when I set the phone to ask what to do (ie. Disk Drive or Activesync) It also doesn't ask anything when plugging in.
Any ideas?

First check the phone with another cable. Are you using the supplied USB to micro or another cable - like a retractable? I made the mistake of buying a retractable that wasn't fully wired to handle data.
Uninstall Activesync and reinstall with the phone disconnected - they once the install is done reattach.

stim141 said:
First check the phone with another cable. Are you using the supplied USB to micro or another cable - like a retractable? I made the mistake of buying a retractable that wasn't fully wired to handle data.
Uninstall Activesync and reinstall with the phone disconnected - they once the install is done reattach.
Click to expand...
Click to collapse
Hey
Yup, I tried another cable, both are official HD2 cables or OEM...
I have also tried another PC (32bit WinXP) - still no detection.
When I press volume down and power for 3 seconds, it gives me that tricolor dislay, i tap it and changes to USB, my PC then sees the phone (but of course not usable).
So I think it's software related, I'm trying to flash with the SD card, but so far it's just stuck on Loading....
Any other suggestion you might have perhaps?

I've managed to figure out it seems to go into car kit mode everytime I plug in the sync cable, and NaviPanel pops up some times. Looks like it's a tad buggy though cause it won't go away and then it goes away and comes back, etc.
Any ideas?

stuck in car kit mode is indicative of a faulty usb port. some people have had success by cleaning out the port with various means,,, compressed air, wd40, toothbrush, one aguy even spat in it.
mostly, though, it requires a warranty repair.
theres a thread "stuck in car kit mode" in the regular hd2 general section.

That fixed the issue! Toothbrush, yes I failed a few times, just kept watching the screen and got really in there hard and dirty on the top small gap, and wala- the light came on while it was locked and it worked.
Is this a permenant solution though? Is it really only dirt and something that is just for maintenance sake or should I be worried the hardware is faulty or on its way out?

Sorry, couldnt say. Sent mine away for repair and they swapped out teh whole board. Plus minewas deffinately clean as a whistle. It seems some people have dirty slots, some have hardware faults.

Have you tried messing with the USB to PC settings?
Settings > Menu > All Settings > Connections > USB to PC > Either pick Activesync or Disk Drive.
Sometimes my computer doesn't do anything when I plug in my phone using Activesync. I would have to open up Windws Mobile Device Center and detect it manually.

[Q] usb debugging failed

USB debugging no longer activates on my phone. Activating it in settings/applications/development brings up the "Allow USB debugging?" permission window. However, no usb notifications appear, and the phone appears to be a dead device to any PC it is connected to.
This started when I accidently got into the download screen from the phone options popup. The display showed the yellow sign, android guy with shovel, and message warning not to turn target off. Phone was not connected to anything at the time.
Searching found a couple of threads indicating that a battery pull was safe to get out of it. Did same.
Since then, usb debugging (or usb anything) has been dead on this phone. Other methods of usb access (thru usb settings) have no effect either.
Tried the following...
(1) restore to my last backup rom.
(2) numerous reboots and battery pulls.
(3) mount/unmount sd card in cwm recovery
(4) clear caches
(5) changed pc's and cables (all worked before)
(6) reinstalled usb drivers on pc (worked before, didn't expect it to help since issue is at phone end)
As you can see, I'm running out of sticks to poke the horse with. Does anyone have any ideas?
Update: new kernel didn't help, either
Update2:
(a) Can't do a restore via odin, which won't detect the phone.
(b) Updated my adb (which I don't use much). adb devices command will not detect the phone via usb.
(c) Installed adbWireless which allowed me to push a stock nandroid backup to the phone. Restored that, usb is still dead.
(d) Restored back to my superdark rom, usb is still dead.
Head scratch: I'd blame hardware except that it seems to be between the settings and execution. If it was purely hardware, I'd expect to see the usual usb notifications. Regardless, it looks like I'll have to revert back to stock and let Verizon figure it out.
Update3:
(a) switched to the new AOSP rom. Nice, but no usb.
(b) switched back to superdark since I like my speakerphone and the AOSP seems to be on hold. Still no usb.
Resolution:
My apologies for not posting a resolution. My bad. After the first few days the post kind of fell off the radar and I stopped checking.
Short version...dirty usb port.
Details...after a week or so, I saw the usb icon flash in the notification bar for a few seconds when I plugged it in for a recharge. Hadn't seen that in a week, hope springs eternal!
A thorough cleaning of the usb port using a paper swab dampened with alcohol restored usb functionality. Not much dirt came out on the paper, but it must have been enough to probably bridge the contacts somehow.
At present the phone is fully functional. The original Verizon cable seems to be a little wonky. I have an aftermarket cable that works fine. It may be that the aftermarket cable did some physical harm to the contacts in the port, or the original cable is going bad (I had something very similar happen on my Omnia). Not sure.
I now use the original verizon cable only for charging at work and use the aftermarket cable for usb connecting at home.
Bottom line...if your usb goes dead as described in the op, carefully clean the port.
My thanks to all who responded...

Download screen shouldn't have harmed you.
You probably are well aware of this, but sometimes it's the simplest solution: Is your usb cable unplugged when you are trying to turn on USB debugging? It will not let you if you are plugged into a pc or mounted for some other reason. Make sure your file manager and any other rogue app is closed. Again, it does sound like you have tried all of this, just giving my best shot ar an answer.
Other then that... Has anyone else had this problem? I haven't seen it in this forum before.
The most general solution to any issue on these fascinates is to undo whatever you did to break it, it's just difficult sometimes to isolate what that event was.
Swyped w/ XDA App. When in doubt, mumble.

Thanks for the reply.
USB is unplugged when turning on debugging. I've also tried turning the phone on with usb plugged in.
The last thing I had done (before accidently activating the download screen) was to install SiMi Folder Widget. Needless to say, it went away with the rom restore.
Also used ATK to kill running processes before turning on usb debugging. Also verified that I still have root.
I've buggered the phone up before but have always been able to figure out a way back (with help from forum searches). This one's got me stuck.
Tonight I'll try to figure out if it can be odin'd back to stock and rebuild from there.
Again, thanks. All suggestions/advice are appreciated.

See op for steps taken to (unsuccessfully) solve this.
Can anyone advise how I can flash back to stock DI01 without using odin, since it won't detect the phone? I can push files to the phone via adbWireless but that's about it.
thanx in advance...

I dont know if you fixed it or not, but here is a stupid question. Are you using the cable that came with your phone? I have several cables that will only charge my phone and only the stock one enables data transfer. Hope this helps. Good luck
Sent from my SCH-I500 using XDA App

Have you tried a factory data reset?
Sent from my SCH-I500 using XDA App

Did this ever get resolved? I hate to see an open issue die like this.

My apologies for not posting a resolution. My bad. After the first few days the post kind of fell off the radar and I stopped checking.
Short version...dirty usb port.
Details...after a week or so, I saw the usb icon flash in the notification bar for a few seconds when I plugged it in for a recharge. Hadn't seen that in a week, hope springs eternal!
A thorough cleaning of the usb port using a paper swab dampened with alcohol restored usb functionality. Not much dirt came out on the paper, but it must have been enough to probably bridge the contacts somehow.
At present the phone is fully functional. The original Verizon cable seems to be a little wonky. I have an aftermarket cable that works fine. It may be that the aftermarket cable did some physical harm to the contacts in the port, or the original cable is going bad (I had something very similar happen on my Omnia). Not sure.
I now use the original verizon cable only for charging at work and use the aftermarket cable for usb connecting at home.
Bottom line...if your usb goes dead as described in the op, carefully clean the port.
My thanks to all who responded...

This may be my problem! I'm having the same similar effects. Although mine randomly shows the symbol but also says my usb is connected when it does. I've been trying to solve this for 2 weeks now! I hope this is the solution.
Sent from my SCH-I500 using Tapatalk

common problem
This must be a common problem because I've had the same issue. switched cables and viola, all good.

My exact problem solved:
USB debugging activated on phone but computer did not detect it at all, nothing what so ever. Not even on dial-up mode, or download-Odin (yellow triangle).
Drivers installed (Fascinated and Nexus for the hell of it).
Tried to ADB my into it both from windows 7 and MAC OS-X.
Hell I even tried a different USB cord.
I would get the USB debug icon in the status bar only when on windows7 machine.
I cleaned the phones USB port with the alcohol damped paper towel/tooth pick and the **** worked, first time.
Man I gotta thanks God for this site. I been ****ing with for 2 days.
Then this lil SOB acted as if nothing ever happen. I wanted to beat the hell out the lil ****er. But we are back friends now.
Thanks dude. This **** needs publicized more. I went through a few links before I found this.
I would and tell people to use something non-metallic and removed the battery beforehand. I did just to be safe.

I think I cooked my USB functionality.

Hey gang. Wondering if you can help me with a strange issue I've got. I can't seem to connect my phone to my computer via USB. Wondering if anyone could help determine if there's a possibility of repair or not.
==Possibly relevant info==
Samsung Vibrant
Android 2.2 Froyo
Kernel version: 2.6.32.9
Build number: FROYO.UVKB5
==End relevant info==
So, my USB is acting up. Has been for the last few months, where although it charges when I plug into a computer, it's not connecting to allow data transfer. I haven't been too terribly worried, this happened before then cured itself when I did a factory reset. The thing that usually triggered it was when I tried connecting to my linux box in media player mode. The phone would just kinda lock up, I'd have to restart it and then USB wouldn't connect. But after doing the factory reset it was fine the first time. THIS time however, since I'd just left it stock now I'm itching to flash a custom rom but even though I've wiped the whole stupid phone totally clean, it still won't connect. I'm trying to follow a method on an article on dkszone.net called "Bypass E - Signature Verification Fail Issue On Vibrant Android 2.2".
So it seems I need USB for the debug mode.
What I think my main problem is, and where I need some help, is that I had purchased a super cheapwad USB car charger off of amazon for like 35 cents. Every time I connected to it, my phone would ask me if I wanted to connect using kies, media player mode, or data storage mode. I thought it was annoying but didn't really think it would harm anything. But now that I'm thinking about it, it's probably been pumping 5v into each pin on the USB port, whereas the USB functionality uses probably 3.3v, and I'm afraid I cooked something.
The random part here though is that about 5% of the time it does (sortof) connect. It brings up the USB options when I want to connect, brings up the icon saying it's using debug mode, etc. But my machine just reports that it didn't recognize the USB device. So, I'm thinking it's on the fritz, but figured I'd check here to see if I could possibly find a ray of hope.

Scooterx3 said:
So it seems I need USB for the debug mode.
Click to expand...
Click to collapse
You can use ADB over tcpip. There's many a free widget to enable it on google play or Do it manually

Thanks for that, I had been wondering if there wasn't a way to do that over wifi. My issue is that sadly I haven't even rooted the phone. ADB over WiFi requires root, whether I do it manually or use one of those super sweet apps.

So anyways, guess what?
My brother in law has the same phone I do, and I grabbed his phone one day and plugged it into my computers and had the same problem as with my own, and I know he hadn't plugged into the same charger I had, hadn't tried the media mode on Linux like I had (which were what I thought were the big contributing factors). SO, I kept digging, found that I hadn't quite yet cleaned it properly. I'd tried my best to clean it but until I swabbed it well with some rubbing alcohol it wasn't as clean as it should've been.
Long story short, I'm backing everything up so I can start flashing roms.
Moral: just clean the dang thing really well

[Q] Formated Nexus 7 2012, now what?

Hello all!
I'm just guna say, this might get long winded so, TLDR, Nexus 7 has no OS, I can get into the boot loader, the only thing I can actually do is get into TWRP v2.8.01, computer doesn't recognize it, can't get it to even see a flash drive that I've formatted to Fat32, now what?
For those who want some background. I got my N7 refurbished from ebay, if that matters at all. First thing I did was update it to Kitkat and root it. Installed some apps and was happy with it for a few months. About a month or so ago it stopped connecting to the Google Play Store. I wasn't bothered by it too much. But as time goes on, I find new apps and would like to use them. But obviously can not.
So, just to be safe, I wrote down all the apps I still had on it just in case they didn't want to load back up. Did a factory reset, still couldn't connect. Looked online and cleared caches and stopped services. Still didn't work. When I went onto the GPS, heh, on my computer it said that I had no devices so that was a clue of some sort. I could still go onto Youtube and log in and use it just fine. Just nothing in the store. So I decided to try something else.
What that was was to clear all my data with TWRP. Went to put in my email and password, couldn't connect, tried another wifi connection, still no go. I was able to use it, but the Play Store still didn't want to play nice. So in a bit of, "rage" we'll call it. I formatted it and now I'm where I am now. With a tablet that won't boot, just sit at the Google logo for up to 5 mins, as long as I've let it sit there for anyway. I have downloaded the Nexus Root Kit and tried to use that, but my computer won't even see my N7 now. In the bootloader or TWRP. So I can't even get anything onto it now.
So, what now? Do I have a bricked tablet that won't do anything or is there something an Android Guru out there can help me with? I'd like to keep it. I mainly used it to read and for various videos.
I have posted on forums.androidcentral but after a week and almost 300 views, no one has made any comments. I'm sorry for my ignorance if I'm missing something.
Thanks! I shall be hoping for good news.

So, does ADB recognize your tablet or not when you type "fastboot devices"?

I take it you mean shift+right clicking in the platform tools folder, open command window here, and typing that into the command prompt? If so, then no, it doesn't show up.

Waslow said:
I take it you mean shift+right clicking in the platform tools folder, open command window here, and typing that into the command prompt? If so, then no, it doesn't show up.
Click to expand...
Click to collapse
Can you go into the bootloader? Did you install the right drivers?

I can get into the boot loader just fine. Recovery sends me to TWRP 2.8.01. I've got the drivers from the Android SDK Manager, Rev. 11 apparently. Would that be any different from the standard drivers that get installed when you hook up the N7? Well, when it works?

Waslow said:
I can get into the boot loader just fine. Recovery sends me to TWRP 2.8.01. I've got the drivers from the Android SDK Manager, Rev. 11 apparently. Would that be any different from the standard drivers that get installed when you hook up the N7? Well, when it works?
Click to expand...
Click to collapse
That is correct. Use this: http://forum.xda-developers.com/showthread.php?p=48915118#post48915118
And if doesn't work check in device manager.
If it works flash the latest factory image and then you will be good to go

I've already had that installed and set up and nothing pops up in the device manager. I've also tried all the usb ports on my computer to no avail.

Waslow said:
I've already had that installed and set up and nothing pops up in the device manager. I've also tried all the usb ports on my computer to no avail.
Click to expand...
Click to collapse
Then try the driver manual in nexus root toolkit

I can follow the instructions, but that doesn't resolve the fact that my computer can't see the Nexus .

go into device manager and delete every single entry that suggests anything to do with a phone, tablet, google device, nexus device, ETC. if you dont do that first, this will probably not work.
once you delete every single entry in there, go to the top command bar and somewhere in those menus is an option to show disconnected devices. delete everything again as above.
now, does your tablet still charge on the AC plugged into the wall? does it still charge when plugged into the computer usb? drivers are NOT required for usb to supply power. if so, the usb connector is probably OK. if not, your usb connector may be toast.
next, connect to the computer. does windows show any device connected? if not, try a different usb cable. report your findings back.

Sorry for the late reply.
There is nothing in the device manager related to my Nexus, which is odd, it had entries for flash drives, a camera, and my phone. All of which were in the disconnected devices. I got rid of just for the sake of it. Nexus charges just fine, either from the wall or any of my usb ports. If there is no way to make ANY computer see my Nexus, is it safe to say it's bricked?
I do have a cousin who's fluent in Linux if that means anything. I know that Android is a flavor of it. Might work better if both devices speak the same language. Grasping for straws I know.
Again, thanks for the help fwayfarer, GtrCraft, and Fobos531!

If I am reading right, you did NOT try a new USB CABLE yet, did you?
Try a known good USB cable, what I mean by that is try a cable you KNOW works for data transfer on another device and report back.
Connecting it to a Linux machine isn't going to make any difference in my opinion.

I have 2 cables and they transfer things just fine with my phone and my Kindle. I just downloaded everything off of both things, and transferred them back. No issue with the cables. I just popped open my Nexus and it looks like the usb connector and ribbon are fine. I did wiggle them a little but to no avail.

Pull the battery cable, smash the power button for a few minutes, reconnect and try again. It won't recognize a USB thumb drive in bootloader or recovery to my knowledge, BTW. I noticed you mentioned it not seeing one.

I unplugged the battery, hit the power switch for a while, plugged the battery back in, plugged the usb back in, nothing. Still nothing. I had read before that you can put the version of android you wanted on a flash drive. With an otg cable you could use that to update/install what you wanted.

You're probably right, I haven't tried using one in recovery for a long time. You didn't change the battery or anything recently did you?

Nope, haven't replaced anything in the Nexus. The only thing that I could think of that could be wrong is the usb connector. But for it to "fail" at the same time I formatted everything, too much of a coincidence.

Over a week bump

I ran into a similar problem about a year ago. Unless your tablet is connected to the computer you will not see it show up it the windows device manager. You should be able to connect your N7 to a work computer & it should go out for the drivers. If not, then you are Sol. You might have a blown main board.

The only thing my N7 does when I plug it in, is that it charges. That's the only thing I can get it to do. Well, this sucks. If I really have a bricked, or worse, tablet, it's still good for its screen and other bits.

Problems with Nexus 6p not mounting to my computer.

First and foremost I already have the drivers installed properly on the computer the OEM cable and a few others to be sure it wasnt a cord or computer issue.. But when i plug the phone into the computer the nexus doesn't show up either as i mass storage device or even in device manager. To see where I'm coming from I bought the nexus online and the seller sold it for parts and said the phone was in alright condition and said that it works in excellent condition before he wiped the phone and that it had no OS and that he didnt know how to fix. So I thought it was just a simple fix and bought it. Lucky the phone came with twrp already so i plugged in the phone and nothing happened, and I tried sideload and also didnt work. like i said before i installed all the drivers and everything so thats not the problem. I tried the Nexus Root Toolkit and didnt work. I even did the OG way by manually using fastboot but the computer didnt detect the phone. The only method i have left to use is the OTG method so i wouldn't need the computer. Has anyone had this problem before? I searched everywhere to see if anyone had this problem but couldn't. But if you guys already made a thread for this specific problem shoe me. Im thinking its a hardware issue something to do with the port

That's a tough one hopefully it reads OTG and you can flash something. I would grab latest udated twrp and flash first in current recovery. A lot of the new stuff requires it.

this happened to me after owning my Nexus 6P for almost a year. When I plugged the phone into my computer's USB port. Windows didn't acknowledge it BUT the phone was charging.
turns out I needed to get my daughterboard/USB port changed. Sent it in to HUAWEI and they did it for free under warranty (I was without a phone for like 8 days).

I am actually starting to have this problem now... I am certain I am well out of warranty. Plus... I don't trust Huawei.