Hello everybody
Just to describe the problem I quote what I've written here:
http://forum.xda-developers.com/showthread.php?p=32054164&posted=1#post32054164
Hello everybody
I've got a little problem... after a system crash (don't ask me how that happened) I had to re-flash my ROM. Now, after the reboot the "H" was flashing on my screen and turning around 'n around 'n around... after 30 minutes I plugged out the battery and re-plugged it in. Since then I’m not able to boot into Android, I only get the “Android” Text and Logo on my screen but the “H” doesn’t appear anymore.
I tried to re-flash the Rom and also wipe my device (task29), re-flash clk (I got now the 5.0.2 ClK Recovery) and HBoot. But I’m not able to boot the device. I also tried to flash other CM7 Roms (Partition 160 MB, Cache 5MB) but it doesn’t work for me
Anyone got an idea?
**********************************
Click to expand...
Click to collapse
Originally Posted by plasmastrike View Post
I had this exact problem a while ago, Where every ROM I flashed was corrupted. My issue was caused by bad NAND blocks. the H boot screen in Hyperdroid ROM is the boot animation. The android test boot screen is the default boot screen in android. The reason you got that is probably because your bootanimation.zip got corrupted somehow, so it loaded the default one in android. bad NAND blocks can corrupt everything and it starts getting worse as you flash new ROM's and use because of its hardware limitations.
There are two ways of fixing this problem. One way requires you to use Mutty and was technical and mayby had a chance destroy your NAND, I don't remember because it was a while ago I was researching this.
The other solution which is what I recommend and did because it is a lot simpler and easier is to work around your corrupted block. You can do this a couple of ways:
Firstly, a way is to use CLK 1.5 to move a partition over the problem. For instance if you had a bad block around 25 put the first partition recovery partition to 30 MB. Then you can enjoy flashing ROM's again without the NAND problem. I have this solution working now.
Secondly, another simpler way is to use an Android SD ROM to bypass the corrupted block on you internal NAND now and forward into the future.
For more information about bad NAND blocks and to figure out if you have them and where they are go to:
http://forum.xda-developers.com/show....php?t=1189544 (Application)
http://en.wikipedia.org/wiki/Flash_memory#NAND_flash (Theory)
Click to expand...
Click to collapse
We'll thank you for your fast answer. I tried various sizes of the partitions but none worked for me. I now got a error msg in H Boot "A unrecoverable error occurred" and the phone shots down. Also I don't get any of the "bad block" errors in my recovery log when erazing and re-installing a ROM.
I hope you can help me out
Can I use a SD Rom and boot it via H Boot?
Edit 2: So now after flashing a ROM and rebooting with Clockwork Mod it starts himself, than shuts himself down after a few seconds with the HTC Logo, than boots into H Loader... and always the same error message: "A unrecoverable error occurred, rebooting to Bootloader"
Click to expand...
Click to collapse
I now reinstalled everything with the American Android starter Kit, installed CLK 1.4.0.1 & RUU 190 _ 5 image (190 system, 5 cache) and tried to flash a ROM.
ClK Fastboot stops saying:
fastboot_init()
udc_start()
-- suspend --
What can I do now?
Yes I already tried to wipe dalvik cache, format boot.... I think the problem must be somewhere else...
Please help me!!
Well it seems that I fixed the problem... I found a old Backup from a new flashed ROM in Clockwork Recovery. I flashed that and my phone did boot again.
Cannot understand what happend. Is it possible that moving the ROM files to flash on the sd card can corrupt them?
Blacklight-IT said:
Well it seems that I fixed the problem... I found a old Backup from a new flashed ROM in Clockwork Recovery. I flashed that and my phone did boot again.
Cannot understand what happend. Is it possible that moving the ROM files to flash on the sd card can corrupt them?
Click to expand...
Click to collapse
got the same problem only thing that helped me was to remove all and reinstall it again from the beginning with task29
Related
Hi there
i've had a search through the forums and google, but havent come up with anything...
the isue is, after flashing a new CWM NAND ROM on my HD2, the rom will load perfectly the first time. however the issue is when i try to reboot the phone... it loads through cwm, but hangs on loading the rom...
this has happened on several different rom's, and after several task29/mgldr/cwm re-flashes...
Any ideas?
Cheers
Gav
fatmcgav said:
Hi there
i've had a search through the forums and google, but havent come up with anything...
the isue is, after flashing a new CWM NAND ROM on my HD2, the rom will load perfectly the first time. however the issue is when i try to reboot the phone... it loads through cwm, but hangs on loading the rom...
this has happened on several different rom's, and after several task29/mgldr/cwm re-flashes...
Any ideas?
Cheers
Gav
Click to expand...
Click to collapse
Have you tried doing absolutely nothing after first boot, other than skipping through the setup wizard? What I'm wondering is what you may be installing / doing that could be causing this.
One thing that could help is to run logcat with the phone connected during bootup and you could see what is causing it.
Digital Outcast said:
Have you tried doing absolutely nothing after first boot, other than skipping through the setup wizard? What I'm wondering is what you may be installing / doing that could be causing this.
One thing that could help is to run logcat with the phone connected during bootup and you could see what is causing it.
Click to expand...
Click to collapse
hi there
cheers for the suggestion. i tried a re-flash and skipping the setup wizard, but still the same issue.
attached is a logcat capture.
any help appreciated.
cheers
gav
fatmcgav said:
hi there
cheers for the suggestion. i tried a re-flash and skipping the setup wizard, but still the same issue.
attached is a logcat capture.
any help appreciated.
cheers
gav
Click to expand...
Click to collapse
Yeah, looking at your log, you are definitely in a boot loop. Android keeps restarting after what looks like initializing the audio... looks like some files are missing.
What ROM are you using? Have you applied anything (updates) else at all through CWM other than the ROM? Does the ROM you are using require an SD-EXT partition? Is your SD card in the phone?
Digital Outcast said:
Yeah, looking at your log, you are definitely in a boot loop. Android keeps restarting after what looks like initializing the audio... looks like some files are missing.
What ROM are you using? Have you applied anything (updates) else at all through CWM other than the ROM? Does the ROM you are using require an SD-EXT partition? Is your SD card in the phone?
Click to expand...
Click to collapse
hi
i've been trying "skink_Clean_Desire_v1.1_update_signed" and "NexusHD2-Gingerbread_V2.2_NAND_update"...
SD was partioned and formatted using cwm, with a 1Gb ext partition... SD card is present as am flashing using cwm zip from sd...
cheers
gav
fatmcgav said:
hi
i've been trying "skink_Clean_Desire_v1.1_update_signed" and "NexusHD2-Gingerbread_V2.2_NAND_update"...
SD was partioned and formatted using cwm, with a 1Gb ext partition... SD card is present as am flashing using cwm zip from sd...
cheers
gav
Click to expand...
Click to collapse
Which version of CWM are you using? Is it 1.13? Whatever it is, what size did you flash (the partition layout) for your system partition?
Digital Outcast said:
Which version of CWM are you using? Is it 1.13? Whatever it is, what size did you flash (the partition layout) for your system partition?
Click to expand...
Click to collapse
I'm using the latest versions of Magldr and CWM. I flashed a 250Mb system partition.
Gav
Are you sure that is a large enough partition? Is that what the ROM developer recommends?
Digital Outcast said:
Are you sure that is a large enough partition? Is that what the ROM developer recommends?
Click to expand...
Click to collapse
250 is the recommended size on the cwm thread...
not been able to confirm from the 2 rom threads though...
however i have got a mdj rom whuch flashed succesfully on this size...
fatmcgav said:
250 is the recommended size on the cwm thread...
not been able to confirm from the 2 rom threads though...
however i have got a mdj rom whuch flashed succesfully on this size...
Click to expand...
Click to collapse
just use the "daf" folder that comes with the build once you unzip it.
it has the CWR setting configuration all done ready for the build
just flash it.
My issue is: When phone loads android from NAND (sometimes it freezes in GO GO GO) I can use it some unpredictable time. FE. When I switching Mobile Network on it(after 1-2 it freezes). I even upgraded radio to 2.15. No changes still freezes. Second point is, when I turn off radio module and starting using dev. (FE while playing Angry Birds) it freezes again, with the noise on spekers. In my case I detaching battery and waiting for a while (because if you put battery again after a second) it freezes on GOGOGO again. WTF with device. Maybe it is a physical problem?
Dev is TMOUS HD2 16gb.
ps. When I used Android via SD same freeze always happened only with Angry Birds. In WinMo I didnt recognize such issues. Oooh. One more thing. When I tried to go back to WM 6.5 off.ROM. nothing happened after upgrade. I think my device will always live with Android till the end of the days. Thank you in advance!
I always search and read although this one I have not found what I am looking for.
Issue:
Phone started to reboot over and over right after a phone call. It had been working properly for months never doing this before.
Anytime I boot AD NAND I get "INVALID BOOT IMAGE HEADER"
setup when issue started.
MAGLDR 1.13
CWM 3.0.2.4 135m
Typhoon CM7 3.3.0
I HAVE DONE THE FOLLOWING.....
TASK 29
Reflashed MAGLDR
Reflashed CWM
Used CWM to install typhoon CM7 3.3.0 and also tried 3.3.5 after re-doing those steps
I also tried hd2 ginerbread, Kingdom sprint wwe, and a few others..also re-doing everything first between them.
All of this yeilds the "invalid boot image header" error. It seems to be permanent???
Am I missing something? I have flashed over 40 hd2's and have never seen this error before.
The phone is my personal one and I could not even count how many times I have flashed it. Could the nand be corrupted or would that cause other errors installing magldr/cwm?
PLEASE HELP ME.....like I said its my personal phone and I have no backup
THANK YOU FOR YOUR HELP!
Justin
fxdstudios said:
I always search and read although this one I have not found what I am looking for.
Issue:
Phone started to reboot over and over right after a phone call. It had been working properly for months never doing this before.
Anytime I boot AD NAND I get "INVALID BOOT IMAGE HEADER"
setup when issue started.
MAGLDR 1.13
CWM 3.0.2.4 135m
Typhoon CM7 3.3.0
I HAVE DONE THE FOLLOWING.....
TASK 29
Reflashed MAGLDR
Reflashed CWM
Used CWM to install typhoon CM7 3.3.0 and also tried 3.3.5 after re-doing those steps
I also tried hd2 ginerbread, Kingdom sprint wwe, and a few others..also re-doing everything first between them.
All of this yeilds the "invalid boot image header" error. It seems to be permanent???
Am I missing something? I have flashed over 40 hd2's and have never seen this error before.
The phone is my personal one and I could not even count how many times I have flashed it. Could the nand be corrupted or would that cause other errors installing magldr/cwm?
PLEASE HELP ME.....like I said its my personal phone and I have no backup
THANK YOU FOR YOUR HELP!
Justin
Click to expand...
Click to collapse
Hi. I am not sure , but you can try to formar the SD card, because with the phone seems to be O.K. I am formatting always with Panasonic sd formatter , before flashing.
fxdstudios said:
I always search and read although this one I have not found what I am looking for.
Issue:
Phone started to reboot over and over right after a phone call. It had been working properly for months never doing this before.
Anytime I boot AD NAND I get "INVALID BOOT IMAGE HEADER"
setup when issue started.
MAGLDR 1.13
CWM 3.0.2.4 135m
Typhoon CM7 3.3.0
I HAVE DONE THE FOLLOWING.....
TASK 29
Reflashed MAGLDR
Reflashed CWM
Used CWM to install typhoon CM7 3.3.0 and also tried 3.3.5 after re-doing those steps
I also tried hd2 ginerbread, Kingdom sprint wwe, and a few others..also re-doing everything first between them.
All of this yeilds the "invalid boot image header" error. It seems to be permanent???
Am I missing something? I have flashed over 40 hd2's and have never seen this error before.
The phone is my personal one and I could not even count how many times I have flashed it. Could the nand be corrupted or would that cause other errors installing magldr/cwm?
PLEASE HELP ME.....like I said its my personal phone and I have no backup
THANK YOU FOR YOUR HELP!
Justin
Click to expand...
Click to collapse
Hi,
It sounds like your CWM partition is too small .
Are you sure you are flashing the correct CWM size according to your ROM's [OP]?
Try using KSUBEDI's TOOLKIT (Don't forget to thank him).
It's a simple way of partitioning your CWM.
yes i make sure CWM is correct partition size
Yes I always make sure I use the recommended partitioning in the op of the rom I choose.
I have formatted my SD-card with the panasonic tool
as far as the toolkit. It may be something I did wrong but this started with my phone after my FIRST USE of the toolkit.......PROBABLY NOT THE TOOLKIT although I would love to know what I did to my phone.
I just flashed another HD2 about 10 minutes ago and no issues at all.
The only thing I can think of is possibly nand corruption but then again all things I try to do complete 100% except booting nand.
yes i make sure CWM is correct partition size
Yes I always make sure I use the recommended partitioning in the op of the rom I choose.
I have formatted my SD-card with the panasonic tool
as far as the toolkit. It may be something I did wrong but this started with my phone after my FIRST USE of the toolkit.......PROBABLY NOT THE TOOLKIT although I would love to know what I did to my phone.
I just flashed another HD2 about 10 minutes ago and no issues at all.
The only thing I can think of is possibly nand corruption but then again all things I try to do complete 100% except booting nand.
fxdstudios said:
Yes I always make sure I use the recommended partitioning in the op of the rom I choose.
I have formatted my SD-card with the panasonic tool
as far as the toolkit. It may be something I did wrong but this started with my phone after my FIRST USE of the toolkit.......PROBABLY NOT THE TOOLKIT although I would love to know what I did to my phone.
I just flashed another HD2 about 10 minutes ago and no issues at all.
The only thing I can think of is possibly nand corruption but then again all things I try to do complete 100% except booting nand.
Click to expand...
Click to collapse
Hi,
Did you transfer the ROM by cable or card reader?
Corruption can occur with cable(USB)transfers.
card reader in my laptop.
Like I said I have done this numerous times. Close to 100 times I would guess. I do two hd2s for friends today. no issues with either. although mine is still giving the error no matter what I do.
First time I have seen this error and I do not care about my data or backups or anything of the sort.
I have done EVERYTHING to try and rectify this issue I am having to no avail.
I am stumped at this point
bump I am unsure of what to try now
Did you find a solution????
I also have the invaild boot image header error.
This used to be my phone, but i have handed it down to an employee.
He has caused a fault where it force closes with android.process.media, especially when i go to market.
I thought i would update the rom and hopefully "delete/overwrite" the problem.
One thing i did was a backup with ROM manager and upgraded that to 4.
This phone will boot into the existing ROM - Nightlys typhoon 3.2.8, but if i try to go into recovery I get the error.
Anyone found the answer????
fxdstudios said:
I always search and read although this one I have not found what I am looking for.
Issue:
Phone started to reboot over and over right after a phone call. It had been working properly for months never doing this before.
Anytime I boot AD NAND I get "INVALID BOOT IMAGE HEADER"
setup when issue started.
MAGLDR 1.13
CWM 3.0.2.4 135m
Typhoon CM7 3.3.0
I HAVE DONE THE FOLLOWING.....
TASK 29
Reflashed MAGLDR
Reflashed CWM
Used CWM to install typhoon CM7 3.3.0 and also tried 3.3.5 after re-doing those steps
I also tried hd2 ginerbread, Kingdom sprint wwe, and a few others..also re-doing everything first between them.
All of this yeilds the "invalid boot image header" error. It seems to be permanent???
Am I missing something? I have flashed over 40 hd2's and have never seen this error before.
The phone is my personal one and I could not even count how many times I have flashed it. Could the nand be corrupted or would that cause other errors installing magldr/cwm?
PLEASE HELP ME.....like I said its my personal phone and I have no backup
THANK YOU FOR YOUR HELP!
Justin
Click to expand...
Click to collapse
well i dont think that 135 is the exact partition ....135 is used for nexus hd2 but for typhoon rom or hyperdroid rom u must use 150 mb systeme partition with 5 mb cach ...try from the start with task29 to clear everything and flash angain i'm sure it will work
Are you still having this? I seem to be having the same problem now. If I restore a backup it will give me "invalid boot image header". If I put a new ROM over my backup it works fine. I have task 29d. Loaded cLK, CWM, and then a new ROM. Backed this up and then immediately restored it and got the same error when trying to boot. I can get into recovery fine. I have tried different cLK partition layouts too. ):
I did it too, this is the problem and the fix
http://forum.xda-developers.com/showthread.php?t=1040564
Someone please help me!! Before all i problems my phone kept freezing in boot and i tried everything by cleaning my sd, ad hard reset and changing builds and the same boot freeze kept happening. So after getting tired of that and having to hard reset everyday i eventually flashed TMOUS stock rom then after tried to do the magldr 113 isntall. I got magldr installed on my phone and then i choose the ad recovery. When i do i get this message "no boot source". I tried looking up on these forums and can't find anything to fix my problems. Someone please help me with a step-by-step guide. I don't want to own an hd2 running the crummy wm6.5 :/ I NEED ANDROID
download hd2 toolkit. afterward install magldr update recovery, follow the prompts to install and your done. in a nutshell...you were missing clockwork recovery. let me know if this helps
danielfc741 said:
Someone please help me!! Before all i problems my phone kept freezing in boot and i tried everything by cleaning my sd, ad hard reset and changing builds and the same boot freeze kept happening. So after getting tired of that and having to hard reset everyday i eventually flashed TMOUS stock rom then after tried to do the magldr 113 isntall. I got magldr installed on my phone and then i choose the ad recovery. When i do i get this message "no boot source". I tried looking up on these forums and can't find anything to fix my problems. Someone please help me with a step-by-step guide. I don't want to own an hd2 running the crummy wm6.5 :/ I NEED ANDROID
Click to expand...
Click to collapse
do this...depending on the recommended recovery size (typically 5-150-5 for non sense versions) download a recovery from here ..then restart you phone...go into magldr...go to flasher...once the usb is linked to pc run daf.exe from the recovery (extracted folder)...u will then have recovery installed
gdsbalaji said:
do this...depending on the recommended recovery size (typically 5-150-5 for non sense versions) download a recovery from here ..then restart you phone...go into magldr...go to flasher...once the usb is linked to pc run daf.exe from the recovery (extracted folder)...u will then have recovery installed
Click to expand...
Click to collapse
YOU SIR ARE GREAT!!! thanks so much!!!!! i can now use android! im glad it works.
Welcome...glad it worked
Sent from my HTC HD2 using XDA App
gdsbalaji said:
do this...depending on the recommended recovery size (typically 5-150-5 for non sense versions) download a recovery from here ..then restart you phone...go into magldr...go to flasher...once the usb is linked to pc run daf.exe from the recovery (extracted folder)...u will then have recovery installed
Click to expand...
Click to collapse
Great ! I will try it out as well. I have been getting this error for the last few times. I am not sure why this happened.
I installed a WP7 rom and then went back to android (hopeless battery drain with my SD card ... not sure if I can ever do something about that). I could not get back to AD recovery.
Thanks again !
gprash said:
Great ! I will try it out as well. I have been getting this error for the last few times. I am not sure why this happened.
I installed a WP7 rom and then went back to android (hopeless battery drain with my SD card ... not sure if I can ever do something about that). I could not get back to AD recovery.
Thanks again !
Click to expand...
Click to collapse
If you loaded WP7 it may have locked your SD Card - need to format in a Nokia phone. Or reduced the usable size to 200mb - this can be fixed with a partitioning tool from PC
when go back and forth between WP7 and Android the nand is overwritten ... thats why you loose your AD recovery.
REMEMBER - if you ever try WP7 and come back to Android dont forget youll need to task 29 (to clean out that nasty M$ dirt!), flash magLDR, flash recovery ( i usually stick with a 200 mb partition, as i usually run Hyperdroid, AND that way there are no worries about bad blocks), and then the rom.
although its not NECESSARY its recommended buuuut to avoid weird restarts, FCs, and any other random glitches that may occur down the short road ITS NECESSARY! :-D
good luck
hello everyone! I just installed android on my HTC HD2 successfully but when the phone reboot, shows me the MAGLDR says me that android booting from start and I have to setup android everytime I reboot the phone from the start. someone help me passing this step. thankyou in advance
Hey Guys!
I'm a bit new here, but I have register to become an answer to my question which I haven't found yet.
I've flashed my HD2 with tytung's "NexusHD2-ICS-4.0.3-CM9 V1.0" (with task29, radio reinstalled, hspl reinstalled, maglrd reinstalled & cwm reinstalled).
the problem is: after minutes of bootscreen I have to enter my Pin, I do.
There is given the text "Unlocking SIM" , while "he" do so, de screen turns black and I have to enter my Pin again and again. Sometimes he simply accept and go on, but then many process' crash! Process' like: android.process.acore , google.process.gapps, com.android.phone android keyboard ..
they all crash in a row and latest then I have to enter my Pin again.
Could anybody help me?
did you try to reflash the rom?
go to recovery, wipe data/factory reset & advanced -> wipe dalvik cache
after that, install the rom again.
I also have the issue that my phone stucks at the htc screen...i wait for 20 minutes now but nothing happens...i'll try to flash a bigger partition layout magldr...
Try the SD build
Hi, too bad you are having difficulty.
I am running the SD version of the same OS with do problem.
Two options:
Try the SD build:
http://forum.xda-developers.com/showthread.php?t=1437463
Just remember to rename the Folder to ICS, then tell MAGLDR to boot from SD / ICS
or try going back to a stable ROM, remove all PIN codes, then reinstall CM9
Good Luck
i have already removed all pin codes.
also i tried a full wipe with task29 and used the 250mb system partition because i read something about bad nand blocks.
earlier i tried to boot some sd builds that were made for boot with magldr, but without any success...if i go to the selection of the android sd folder in magldr it just pushes me back to magldr main menu :/
my hd2 is difficult to understand because it doesn't work as others do >.<
RichieGKB said:
did you try to reflash the rom?
go to recovery, wipe data/factory reset & advanced -> wipe dalvik cache
after that, install the rom again.
Click to expand...
Click to collapse
First: thanks, that there are people which consider to be with me with my problem
yea, i've already reflashed the rom (felt like 20 times!) ..
and I've actually tried to install no sd-version, I kept it as a loophole. ^^
Situation now: I've simply ignored the messages that every important process is going to die and just clicked the failures away. after that he wants to reboot, to get access to the mobile network --- I click "Reboot" und have now a Bootloop ...
i also tried another ics rom without cm9 and got the bootloop at the first boot...
I dont understand why no rom is running on my phone...
So guys !
I've done it ;D
Have simply used the sd-version and it works great!
@RichieGKB: If you have any question to the sd-version, message me !
Good post Charles, it helps me.
Seems to helps you too guys. Don't forget to hit thanks button!
i tried the full wipe and also a larger system and cache partition to get the rom working, but it still doesn't on nand.
I'm downloading the sd version at the moment, but this can't be the solution for the future :/
maybe i have to wait for newer versions of this rom
ah I solved the problem.
I didn't change the system partition layout in recoverys .cfg file. I didn't know that i have to do this because i thought it would be enough to install another version of magldr
@weedstar: Thats not the problems solution.. next time try to fix permissions via CWM. Sd version is slow. Nand is better.
Hf
Sent from my NexusHD2
Need some advice, phone running NexusHD2-ICS-CM9-V2.7, backed up using CWM and tried to flash nexus jellyBean by changing partirion to 400mb, phone would not boot passed cyanogenMod screen, wiped system changed back to 250mb partition and restored system but now phone will not boot passed ICS screen, have tried reflashing ROM but still same problem, any thoughts please.
I believe I should have said that the phone is in ICS animation and that is it, cannot get passed this, have tried everything apart from dropping the phone in a bucket of water. Have cleaned out everything but the restore will not work.
Is there a solution?
IMO you should try a fresh installation of whatever ROM you want: wipe everything(including microSD, but before do a backup) and install it from scratch!
Good luck!
bib*oops said:
IMO you should try a fresh installation of whatever ROM you want: wipe everything(including microSD, but before do a backup) and install it from scratch!
Good luck!
Click to expand...
Click to collapse
does not seem to recognise computer or show charge now, I have made a full backup but even after a full restore with everything loading okay still cannot get past ICS animation screen.
hardav said:
does not seem to recognise computer or show charge now, I have made a full backup but even after a full restore with everything loading okay still cannot get past ICS animation screen.
Click to expand...
Click to collapse
This is getting very frustrating having checked dozens of posts cannot find a logical solution, tried every possible solution I can find. I can get into all features of system,2.08HSPL shows, CWM, MAGLDR, usb screens okay, in short everything okay bar cannot fully load any ROM past animation screen, have tried task 29 but will not load RUU just sits at HTC with bar and the has communication error. Can the the phone be bricked when all functions are available? Any suggestions would be appreciated.
Can you run SD roms past boot anim?
Have you performed a NAND check from MAGLDR? Might be bad NAND blocks.
Well guys after hours of trying to sort this out I have come to the sad conclusion the phone is stuffed which has left me depressed, I have tried:
Restore from my original backup all loads good but does not bootup
task 29 (error 262) does not seem to recognise windows sync
Tried loading from cd using nbh but tri-colour boot loader will not search for file
It is a shame as I can get into all the bootloaders which people tell me should load but no luck
Thanks for your help HD2 goodby
hardav said:
Well guys after hours of trying to sort this out I have come to the sad conclusion the phone is stuffed which has left me depressed, I have tried:
Restore from my original backup all loads good but does not bootup
task 29 (error 262) does not seem to recognise windows sync
Tried loading from cd using nbh but tri-colour boot loader will not search for file
It is a shame as I can get into all the bootloaders which people tell me should load but no luck
Thanks for your help HD2 goodby
Click to expand...
Click to collapse
you're probably using too big an SD card, is it bigger than 8gb?
If so, put the LEOIMG.NBH file on an 8gb or smaller card, and get into tricolor, it should load.
Yes I am using a 16gb card, in the meantime I have managed to restore the phone back to ics nexus v2.7, not sure how I did it but in case anybody has the same problem here goes'
I had to get back to WM 6.5 no matter which ROM I tried could not get the custom RUU to load, (probably due to the sd card size) but I noticed I had a custom RUU sitting on my desktop (not sure why there but probably from past messing about) as a last resort I loaded this and bingo within a short time windows loaded up and from there reflashed ICS and restored from backup, working perfectly what a relief. Goes to show ignorance sometimes wins. Details of the custom RUU used.
LEO CUSTOM RUU
[email protected]
File 1.1.0.0 921KB
This worked with the 16gb card, I would like to go to jelly bean but am I pushing my luck. Can you just reload CWM with a 400 partition?
Have a nice day
Cheers from kiwiland
hardav said:
Need some advice, phone running NexusHD2-ICS-CM9-V2.7, backed up using CWM and tried to flash nexus jellyBean by changing partirion to 400mb, phone would not boot passed cyanogenMod screen, wiped system changed back to 250mb partition and restored system but now phone will not boot passed ICS screen, have tried reflashing ROM but still same problem, any thoughts please.
I believe I should have said that the phone is in ICS animation and that is it, cannot get passed this, have tried everything apart from dropping the phone in a bucket of water. Have cleaned out everything but the restore will not work.
Is there a solution?
Click to expand...
Click to collapse
I had a problem with that one, so i decided to use this one:http://forum.xda-developers.com/showthread.php?t=1584160, and i think that is working much better than Nexus.