Do you know if there is android rom for hp614c ? Or can someone try to port it ?
The 614c uses a much different CPU than any existing android devices, from what I understand. There's little chance that android will ever run on this device.
the only way to run android in windows mobile is through haret from what I heard so far. But that still involve making linux image that boot on our device and then merge with android code, so if you want you have to do it yourself, I am not aware of any android rom nor I have time to investigate on it yet
android
Any news?
just use WM 6.5.. i tried on mine and it works perfectly.. xD
Well yes there is a way but still buggy I mean WIFI and Phone does not work..
But if someone want's i can tell him how to do it (sorta)
Oh and you will need a 2Gb or smaller micro SD card
Edit:
You know android now supports marvell pxa3xx cpu
The trick is that you have to configure the kernel
But I will be gone for christmas new year and stuff like that so i am not going to do something
tonev said:
Well yes there is a way but still buggy I mean WIFI and Phone does not work..
But if someone want's i can tell him how to do it (sorta)
Oh and you will need a 2Gb or smaller micro SD card
Edit:
You know android now supports marvell pxa3xx cpu
The trick is that you have to configure the kernel
But I will be gone for christmas new year and stuff like that so i am not going to do something
Click to expand...
Click to collapse
wifi probably is not a problem as i believe ipaq2xx has the same sdio chip and marvell has a linux drivers. i remember seeing that in the haret site
edited: link for wifi driver here
Any improvements?
Well no improvements and do you know why i even got a step backwards!!!!!1
NO CAMERA
the last time i forgot to check the camera and when i did it does not work well
Dear tonev!
Can you please write a tutorial how to put android on the ipaq?
i read a post for and app to dual boot of android and wm. here.
does anyone knows if on our device can be installed both os?
kioevad said:
i read a post for and app to dual boot of android and wm. here.
does anyone knows if on our device can be installed both os?
Click to expand...
Click to collapse
this is just an app to launch linux, probably like haret. we still need a proper configured linux kernal .etc
keyx said:
this is just an app to launch linux, probably like haret. we still need a proper configured linux kernal .etc
Click to expand...
Click to collapse
http://www.redmondpie.com/how-to-dual-boot-windows-mobile-and-android-on-windows-phone-9140407/
Interesting..
First of all this is not a bootloader because you first boot windows mobile and then this app launches and you boot in android via haret... so this is just fancy stuff
Second if you want i will post the guide how to boot android but it is pointless because there is nothing you can do with it... You can't use it as a phone you can't use it as a camera all you can do is "play" with it if you are lucky to have wifi working...
I think may be you run android on your 61x is using by "haret" this program.
So i have search some of these information but not useful and i can't made my 612c run android to "play".
I hope that you can share these of information with us. Let us to solve the problem of running android.
tonev said:
Second if you want i will post the guide how to boot android but it is pointless because there is nothing you can do with it... You can't use it as a phone you can't use it as a camera all you can do is "play" with it if you are lucky to have wifi working...
Click to expand...
Click to collapse
Yep, i would appreciate it
Can someone write instructions how to put an android on 614c?
I came to instruction;
Jumping to Kernel... and then phone stops
What to do, how to fix this
tonev said:
Well yes there is a way but still buggy I mean WIFI and Phone does not work..
But if someone want's i can tell him how to do it (sorta)
Oh and you will need a 2Gb or smaller micro SD card
Edit:
You know android now supports marvell pxa3xx cpu
The trick is that you have to configure the kernel
But I will be gone for christmas new year and stuff like that so i am not going to do something
Click to expand...
Click to collapse
Hi
what are the configurations needs to be done for the linux kernel to support PXA320. i am trying to load linuc from WM6.1 using linux. but strucked up after the message Jumping in to kernel.
hi, i use 614c. i tried a new anroid emulator on my ppc.But it showed me some choosing ppc(diamd,tropaz...).But there was not 614c . So it didn^t work. can you say me which anroid rom works correctly?.i want to really try it on my 614.thanks
I've seen a few Adnroid ROMs on PXA270 ffrom our HP. I am aware that it will not operate the camera, WiFi, and half the other stuff, but I would just see how it loads and works. I think the biggest problem is Haret because he always stops at the "Skip to zImage" and it looks as though he saw no memory HP: (
I bet that if tonev described how to runi it we would have found someone to help stick this to work.
Sorry for my eng I think you know what I mean
Hi all,
Very sorry to seem so n00byish but have never had the guts to do this till now
Basically I have an XDA Orbit 2 (which has the bog standard rom although i am using it with a virgin simcard so it maybe unlocked)
Laptop running Vista Ultimate.
8gb Micro SD card
I would like to upgrade the rom to 6.5 or something with manila built in, Ive searched for guides but they all look very confusing to me :S
If anyone would point me in the right direction or where to start or a simple guide it would be apreciated
I will also give a donation to the rom creator.
whapper said:
Hi all,
Very sorry to seem so n00byish but have never had the guts to do this till now
Basically I have an XDA Orbit 2 (which has the bog standard rom although i am using it with a virgin simcard so it maybe unlocked)
Laptop running Vista Ultimate.
8gb Micro SD card
I would like to upgrade the rom to 6.5 or something with manila built in, Ive searched for guides but they all look very confusing to me :S
If anyone would point me in the right direction or where to start or a simple guide it would be apreciated
I will also give a donation to the rom creator.
Click to expand...
Click to collapse
Check this out. All the information you'll need.
http://forum.xda-developers.com/showthread.php?t=381600
Good Luck.
Hey dudes, is it possible to install any ROM for Acer Liquid that has WM in it? I think there could be any firmwares portable from S200. Am I right? Looking forward to your replies. Perhaps you could made WM which could be launched up from Android and put on the storage card. I'd be glad to any deals .
Impossible.
Was explained thousands of times, for different devices, you can search for it.
Hello !
I tried to upgrade i5700 Spica from 1.5 to 2.1 at an early stage, but I remember the Samsung software failed to recognize my Spica phone connected over USB port on Windows XP.
Maybe someone can point me to a topic, where the latest upgrade is explained, I will try to run the update from Windows Vista if it will work this time.
Another question is, do applications from 1.5 get rewritten when upgrading to 2.1 ?
So all changes are being lost ?
Regards,
Jan
First of all- use Odin, not KIES or NPCS.
When you flash 2.1 over 1.5 all data will be lost, although paid apps are connected with your google account and not phone.
Here is very good tutorial how to upgrade from 1.5 to 2.1
Hi,
I am from India and bought a galaxy spica in early 2010. Now I am trying to update it to froyo but Kies Mini gives me an Error saying Firmware not registered. Can anyone help me Please. Alos if I want to insert a new ROM in the phone, how can I do It?.
Help and Advice really appreciated.
spica has not official update for froyo. You have to make unofficial update for froyo..
Sorry for my abd english ^^
rprsayz said:
Alos if I want to insert a new ROM in the phone, how can I do It?.
Click to expand...
Click to collapse
Spica is a very peculiar device due to its hardware. There is a full developers site for it, have a look to forum[dot]samdroid[dot]net (sorry, I'm new and not allow to post external links)
Currently I'm on Gingerbread 2.3.7 (based on Cyanogenmod 7), but still has some TODO's, like finishing Camera (it works but without a custom preview) or Bluetooth audio (for car hands free, for example), but it is a very smoth version, and under continuos development. I really recommend it.
Also you will find many flavours of Froyo, with all drivers working.
Regards.