Related
Hello
As i was having some peculiar problems with existing ROM Version, I reverted back to Orignal O2 Asia ROM.
Reverting back went successful. I saw that after reverting back I stopped at Setup will start in 3 seconds and i restarted the O2 to get the extended rom details. I copied all the files on my Laptop and then I used the first 416 Bytes and copied in the new extended ROM downloaded. After complete activity, i found that i am not able to boot the O2, SO I reverted back with the Orignal O2 Asia ROM. Still i am not able to see the Storage
Something which i think i did wrong:Orig O2 Asia ROM having files
ROM:1.12.00 WWE
ROM date 05/28/05
Radio: 1.12.00
Protocol:1337.42
ExtROM Version:1.12.550 WWE
Big Storage ROM File which i used for insert 416 bytes was downloaded from ftp site which was BigStorage_ROMs_WWE_1.13.00.zip
What went wrong?
Why i am not able to see the storage part?
HOw should I recover back the storage containing extended ROM part?
Please Help
Also, which is the best stable ROM with exact file path and also the extended ROM file with Big Storage.
Incase you have some files which you would like to share pls mail me on [email protected]
Thanks
Manmohan
I recently acquired an Artemis that was externally branded as a Dopod. Even though a new device, it contained an O2 ROM (1.25.207.1 GER) in German. I have been able to successfully change to WM5 (1.12.405.101) and WM6 (3.13.405.1), as well as WM6 O2 WM6 Premium Plus 1.0. Each time I used USPL before changing the ROM. These changes happened without a hitch.
However, when I attempt to change to a Dopod WM5 (1.25.707.2) or WM6 (3.7.707.1) ROM, I get an Invalid Model ID error message. I'm trying to understand the problem as well as any potential fix.
After a lot of time in the forums, I seem to be going in circles. I see multiple references to other unexplained Model ID problems, but no clear answer. Unfortunately, I did not check the model number while I still had the O2 ROM installed. I'm not sure if the number was ARTE200 or ARTE100, which it is right now with the HTC WM6 ROM installed.
One possible solution I found for a similar situation was a message by dtobin suggesting a re-install of the original O2 ROM and then changes to the Dopod ROMs. I'll try that tomorrow.
Can anyone suggest a different path or solution. I just have not made the connection as to why I can go back to the HTC ROMs, but not back to the Dopod.
thanks
cc
Which activesync do you use?
What kind of virusscanner/firewall is intalled?
Does an error occur while using RUU? if so which code?
seejsee:
uspl needs some patching. it will not allow any rom installation, but will allow most of them.
if you want to find out model id:
start-settings--system-device information-identity. there is ARTEXXX number.
you can also open back cover, remove a battery, there is a model on a sticker.
when you want to flash official shipped WM6 HTC ROM for the different country device (you want to change a ROM language on your device)
the solution for you is this:
0. get original shipped ROM for your device.
register your device on htc site (eClub or something..). this will alow to download rom relevant for your device (original, shipped rom). it is always a good idea to have it, in case if something will go wrong during upgrade. you will be able to go back, using original rom.
1. take a rom, which was flashed successfully on your device last time (or you can take original shipped htc rom, which you have downloaded)
2. extract files from this rom with winrar or other utility
3. locate RUU_signed.nbh file. open it in winhex editor or other hex editor tool. make a note of model id and country code.
model - offset 00000040 (example: ARTE1000), country - 000001E0 (example HTC__001). the example is for engl. rom.
4. take a rom you wish to flash (the one does not flash with uspl installed). extract this rom (same as in step 2)
you will need to make small "adjustments" in this rom.
correct country and model id to values corresponding to "last good flashed rom".
5. save changes in .nbh file.
6. flash this "corrected" rom as you normally do with ROMUpdateUtility.exe, from the directory where you have extracted files.
you can simplify process and use following values on all ROMs, when you modify your desired .NBH file:
- for the model ARTE1***
- for country code 11111111
this will work with USPL.
re: USPL must be installed prior to flashing or device must be CID unlocked.
after flashing ROM, install USPL again, because it will be overwritten by new ROM.
regards,
wm6 x htc p3300
italian?
maria1:
this is true for any htc shipped official wm6 rom.
regards,
Success!
I took the advice of fdp24 and used a hexeditor to modify the model number and country code of the .nbh file in the desired ROM to match the data from a ROM that would install.
I will also try the 11111111 approach too.
regards,
cc
another succes here, changed the value's with winhex, now I have the official english htc rom wm6 on a dutch p3300, thanks!!
ipl: 3.13.0001
spl: 3.13.0000
gsm: 02.94.90
OS: 3:13.0.0
-removed-
previous message updated.
fdp24 said:
-removed-
previous message updated.
Click to expand...
Click to collapse
Hi Brothers i have a prob with this
When i try to flash my rom i get an ERROR [226] FLASH WRITE Do u know what i do false ?
Work very good.... Great job
fdp24 said:
seejsee:
uspl needs some patching. it will not allow any rom installation, but will allow most of them.
if you want to find out model id:
start-settings--system-device information-identity. there is ARTEXXX number.
you can also open back cover, remove a battery, there is a model on a sticker.
when you want to flash official shipped WM6 HTC ROM for the different country device (you want to change a ROM language on your device)
the solution for you is this:
0. get original shipped ROM for your device.
register your device on htc site (eClub or something..). this will alow to download rom relevant for your device (original, shipped rom). it is always a good idea to have it, in case if something will go wrong during upgrade. you will be able to go back, using original rom.
1. take a rom, which was flashed successfully on your device last time (or you can take original shipped htc rom, which you have downloaded)
2. extract files from this rom with winrar or other utility
3. locate RUU_signed.nbh file. open it in winhex editor or other hex editor tool. make a note of model id and country code.
model - offset 00000040 (example: ARTE10000), country - 000001E0 (example HTC__001). the example is for engl. rom.
4. take a rom you wish to flash (the one does not flash with uspl installed). extract this rom (same as in step 2)
you will need to make small "adjustments" in this rom.
correct country and model id to values corresponding to "last good flashed rom".
5. save changes in .nbh file.
6. flash this "corrected" rom as you normally do with ROMUpdateUtility.exe, from the directory where you have extracted files.
you can simplify process and use following values on all ROMs, when you modify your desired .NBH file:
- for the model ARTE1***
- for country code 11111111
this will work with USPL.
re: USPL must be installed prior to flashing or device must be CID unlocked.
after flashing ROM, install USPL again, because it will be overwritten by new ROM.
regards,
Click to expand...
Click to collapse
work very good. Great job. Now I have a Portuguese Rom... Thank you
Thank for solution , work fine for 244 error too.
not sure i understand.
you have error 244 still?
regards,
Originally Posted by fdp24
seejsee:
uspl needs some patching. it will not allow any rom installation, but will allow most of them.
if you want to find out model id:
start-settings--system-device information-identity. there is ARTEXXX number.
you can also open back cover, remove a battery, there is a model on a sticker.
when you want to flash official shipped WM6 HTC ROM for the different country device (you want to change a ROM language on your device)
the solution for you is this:
0. get original shipped ROM for your device.
register your device on htc site (eClub or something..). this will alow to download rom relevant for your device (original, shipped rom). it is always a good idea to have it, in case if something will go wrong during upgrade. you will be able to go back, using original rom.
1. take a rom, which was flashed successfully on your device last time (or you can take original shipped htc rom, which you have downloaded)
2. extract files from this rom with winrar or other utility
3. locate RUU_signed.nbh file. open it in winhex editor or other hex editor tool. make a note of model id and country code.
model - offset 00000040 (example: ARTE10000), country - 000001E0 (example HTC__001). the example is for engl. rom.
4. take a rom you wish to flash (the one does not flash with uspl installed). extract this rom (same as in step 2)
you will need to make small "adjustments" in this rom.
correct country and model id to values corresponding to "last good flashed rom".
5. save changes in .nbh file.
6. flash this "corrected" rom as you normally do with ROMUpdateUtility.exe, from the directory where you have extracted files.
you can simplify process and use following values on all ROMs, when you modify your desired .NBH file:
- for the model ARTE1***
- for country code 11111111
this will work with USPL.
re: USPL must be installed prior to flashing or device must be CID unlocked.
after flashing ROM, install USPL again, because it will be overwritten by new ROM.
regards,
very very good thx
well i made this a while ago, and finally got around to get it fully tested and release it.
this HardSPL is based on version 1.26 SPL. and is version 2 (2.00.cmon). also i *think* this one will not hard reset the phone
it's for any OPAL***** modelid now,
thanks to wlinsong and PhamQuang for testing
instructions:
0a) make sure you have .NET framework installed on your PC! if not, get it from http://www.microsoft.com/downloads/...fd-ae52-4e35-b531-508d977d32a6&DisplayLang=en
0b) if you have vista, WMDC update is recommended: http://www.microsoft.com/windowsmobile/en-us/help/synchronize/device-center.mspx
1) download Hard-SPL package from attachment, extract to an empty folder (Opal_HardSPL_v2_0.zip).
2) you must have the phone synced with your PC, i.e. device must be in Windows Mobile!
3) run Opal_HardSPL_v2.exe.
4) follow steps in the RUU, and check on the device for prompts after PC shows loading bar.
5) device should go to a grey screen
6) go on with RUU, Hard-SPL flashes, device automatically reboots, job done.
7 ) to confirm you got it installed, go into bootloader mode (tricolour screen!) and verify the screen shows 2.00.cmon
+1: if the screen won't go to grey mode (SSPL), then try manually entering SSPL by using the Opal-SSPL-Manual.zip - run the EXE on the phone then when it went to grey screen, run the HardSPL exe on PC and flash.
finally, donations are always appreciated to the "To Cmonex" link in my signature
now, enjoy the hardspl and cooked roms
UPDATE: How to flash stock SPL back for warranty purposes - please use this only if you need to return device for repair!
steps:
0. first flash entire stock ROM, then after that you can flash stock SPL as *last step*. do not reverse this flashing order please
1. get the RUU_Signed.NBH file from attachment (opalstockspl126.zip (185.3 KB))
2. run hardspl package from attachment (Opal_HardSPL_v2_0.zip)
3. *after* Opal HardSPL EXE extracts files, replace extracted RUU_Signed.NBH with the one from opalstockspl126.zip i.e. when asked to overwrite, say Yes, if it doesn't ask, then you are trying to copy it before running the HardSPL EXE, which is the wrong order.
4. flash just like you flashed HardSPL (see original instructions above)
5. device reboots, you can now check if it says 1.26.0000 or still 1.26.cmon or 2.02.cmon, in the latter case you did something wrong, it has to show 1.26.0000.
Great work, thanks for CMONEX !!!
I don't fully understand what this is for, but looks important soo THANKS
lupacche said:
I don't fully understand what this is for, but looks important soo THANKS
Click to expand...
Click to collapse
it's to allow you to flash any rom PhamQuang is already cooking some rom for opal i believe
OPAL10000 modelid
how do i check modelid?
FINALLY!!!!Congratulation !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
cmonex said:
well i made this a while ago, and finally got around to get it fully tested and release it.
this HardSPL is based on version 1.26 SPL.
it's for OPAL10000 modelid, if anyone has a different model, report in this thread... those should be tested out before doing anything.
thanks for wlinsong and PhamQuang for testing
instructions:
0a) make sure you have .NET framework installed on your PC! if not, get it from http://www.microsoft.com/downloads/...fd-ae52-4e35-b531-508d977d32a6&DisplayLang=en
0b) if you have vista, WMDC update is recommended: http://www.microsoft.com/windowsmobile/en-us/help/synchronize/device-center.mspx
1) download Hard-SPL package from attachment, extract to an empty folder.
2) you must have the phone synced with your PC, i.e. device must be in Windows Mobile!
3) run Opal_HardSPL_v1.exe.
4) follow steps in the RUU, and check on the device for prompts after PC shows loading bar.
5) device should go to a grey screen
6) go on with RUU, Hard-SPL flashes, device automatically reboots, job done.
7 ) to confirm you got it installed, go into bootloader mode (tricolour screen!) and verify the screen shows 1.26.cmon
+1: if the screen won't go to grey mode (SSPL), then try manually entering SSPL by using the Opal-SSPL-Manual.zip - run the EXE on the phone then when it went to grey screen, run the HardSPL exe on PC and flash.
finally, donations are always appreciated to the "To Cmonex" link in my signature
now, enjoy the hardspl and cooked roms
Click to expand...
Click to collapse
Thank for your hard working, but there's new issue occour.
When I tried to dump the hardspl, the error message appear"image file corrupted", then the work has been ceased.
If you have any idea about it, please kindly guide me!!
dpauser said:
Thank for your hard working, but there's new issue occour.
When I tried to dump the hardspl, the error message appear"image file corrupted", then the work has been ceased.
If you have any idea about it, please kindly guide me!!
Click to expand...
Click to collapse
Heihei~~ Just read the guide instruction carefully, I have fixed the problem.
And currently, I flashed a HK Rom code on my device.
However, I found a new issue. The this device has Compatibility with the BT ear price. I'm using a Itech D-Clip Radio one. When the call is coming, the call will be actived.But after the call, the BT connection will disconnect.
Any one has idea about this? Thanks a lot to all.
itaychi said:
how do i check modelid?
Click to expand...
Click to collapse
see bootloader screen (tricolour) it will say OPAL100 or similar... if the number is 100 then ok. if not, post in this thread
EDIT: oops, possibly for opal there is no modelid displayed there (could someone verify - i dont have an opal). use getdevinfo in mtty. but easiest is just try the spl package and if you get modelid error, post.
Hi cmonex, can you please make a HardSPL for the Touch 3G (Jade).
congratulations
hope to get fresh news on blackstone
thanks Cmonex
can it be used for htc T2223?
another question:
Can the rom upgrade file in the following link be burnt into my htc t2223?
http://www.htc.com/hk-en/SupportDownload.aspx?p_id=175&cat=2&dl_id=422
hi cmonex ! i've try ur hardspl , and i got a problem , my VIVA is hardspl now , but i try to use NBHTOOLS to dump the os.nb out of a WWE official rom and then use htc rom tools to rebuild a nbh file, but can not flash in to my viva . but i try flash that original official rom ,it works , is it my bad ? something i miss?
here is my htc rom tool setting:
[Opal]
ModelId=OPAL100**
SignMaxChunkSize=64
SPL=$200
SPLN=SPL
Splash1=$600
Splash1N=Splash
Radio=$301
RadioN=Radio
System=$400
SystemN=System
when i flash my edit rom , the ruu erro is "code 270 Updata erro the image is incorrect"
thanx alot for your hardwork
terry888_1978 said:
hi cmonex ! i've try ur hardspl , and i got a problem , my VIVA is hardspl now , but i try to use NBHTOOLS to dump the os.nb out of a WWE official rom and then use htc rom tools to rebuild a nbh file, but can not flash in to my viva . but i try flash that original official rom ,it works , is it my bad ? something i miss?
here is my htc rom tool setting:
[Opal]
ModelId=OPAL100**
SignMaxChunkSize=64
SPL=$200
SPLN=SPL
Splash1=$600
Splash1N=Splash
Radio=$301
RadioN=Radio
System=$400
SystemN=System
when i flash my edit rom , the ruu erro is "code 270 Updata erro the image is incorrect"
Click to expand...
Click to collapse
flash the radio as 0x300..
dr33 said:
can it be used for htc T2223?
another question:
Can the rom upgrade file in the following link be burnt into my htc t2223?
http://www.htc.com/hk-en/SupportDownload.aspx?p_id=175&cat=2&dl_id=422
Click to expand...
Click to collapse
if htc T2223 is htc viva, then yes
cmonex said:
flash the radio as 0x300..
Click to expand...
Click to collapse
but i've tried flash the os only , still not work ! u means i need to add the radio into it?
Stickied.
Ta
Dave
terry888_1978 said:
hi cmonex ! i've try ur hardspl , and i got a problem , my VIVA is hardspl now , but i try to use NBHTOOLS to dump the os.nb out of a WWE official rom and then use htc rom tools to rebuild a nbh file, but can not flash in to my viva . but i try flash that original official rom ,it works , is it my bad ? something i miss?
here is my htc rom tool setting:
[Opal]
ModelId=OPAL100**
SignMaxChunkSize=64
SPL=$200
SPLN=SPL
Splash1=$600
Splash1N=Splash
Radio=$301
RadioN=Radio
System=$400
SystemN=System
when i flash my edit rom , the ruu erro is "code 270 Updata erro the image is incorrect"
Click to expand...
Click to collapse
terry888_1978 said:
but i've tried flash the os only , still not work ! u means i need to add the radio into it?
Click to expand...
Click to collapse
terry ,
I've got the same problem as you.
vivi
terry888_1978 said:
hi cmonex ! i've try ur hardspl , and i got a problem , my VIVA is hardspl now , but i try to use NBHTOOLS to dump the os.nb out of a WWE official rom and then use htc rom tools to rebuild a nbh file, but can not flash in to my viva . but i try flash that original official rom ,it works , is it my bad ? something i miss?
here is my htc rom tool setting:
[Opal]
ModelId=OPAL100**
SignMaxChunkSize=64
SPL=$200
SPLN=SPL
Splash1=$600
Splash1N=Splash
Radio=$301
RadioN=Radio
System=$400
SystemN=System
when i flash my edit rom , the ruu erro is "code 270 Updata erro the image is incorrect"
Click to expand...
Click to collapse
%1 Get a error270,image file corrupted!!!
htcrt.ini
[Opal]
ModelId=OPAL100**
SignMaxChunkSize=1024
SPL=$200
SPLN=SPL
Splash1=$600
Splash1N=Splash
Radio=$300
RadioN=Radio
System=$400
SystemN=System
Hii i have elfin and not unlocked my elfin but still i can load any rom in my elfin have loaded 6.1,6.5,and many more.
Want to know will be posting procedure to SAFELY can be loaded in to your HTC MOBILE
miteysh.
mitesh20360 said:
Hii i have elfin and not unlocked my elfin but still i can load any rom in my elfin have loaded 6.1,6.5,and many more.
Want to know will be posting procedure to SAFELY can be loaded in to your HTC MOBILE
miteysh.
Click to expand...
Click to collapse
can u please put a little more light on this
mitesh20360 said:
Hii i have elfin and not unlocked my elfin but still i can load any rom in my elfin have loaded 6.1,6.5,and many more.
Want to know will be posting procedure to SAFELY can be loaded in to your HTC MOBILE
miteysh.
Click to expand...
Click to collapse
couple of questions I wanna ask u..
1. when u bought ur device was it a brand new one or a used one??
2.are u sure ur device is not locked?? did u check you your IPL??
3.what is your IPL/SPL compination??
hope that's not much.. thanks
and by lock, are we talking about cid-lock or sim-lock?
crapula512 said:
and by lock, are we talking about cid-lock or sim-lock?
Click to expand...
Click to collapse
Yeahhh... i was thinking about it too
Answers!!!!!!
I bought my elfin in the year 2008.
not knowing how to use after few months i flashed elf rom and found that my device was restarting and of no use....
i learned about unlocking from this website after seating hours and hours.
i have gsm one.
elfin.
How to flash any rom...
I have original rom loaded and with ipl/spl of 2.xx
but now i have ipl/spl 3.14.com.
loaded more that 100's of roms of 6., 6.1, 6.5.
any rom.
first of all you need to know your device configuration to load any rom.
if you have detailed configuration then you can load it.
currently loaded wm6.5 28011 onyx. rom.
radio : 3.34
procedure!!!!!!
i will be enclosing the safe procedure for flashing...
no worry.....
you will learn to load and make your own flash...
give to few days time..
mitesh20360 said:
I have original rom loaded and with ipl/spl of 2.xx
but now i have ipl/spl 3.14.com.
loaded more that 100's of roms of 6., 6.1, 6.5.
any rom.
first of all you need to know your device configuration to load any rom.
if you have detailed configuration then you can load it.
currently loaded wm6.5 28011 onyx. rom.
radio : 3.34
Click to expand...
Click to collapse
if your spl says spl 3.14.com.... it means you have done HSPL... and thats the normal thing everybody do to go in for safe cookedroms flashing..
sorry bro there is nothing special about your case
opss!!!
but i have changed he ipl/spl/radio/flashed/many roms/ changed pagepool file/ all that can brick a fone..
i have recently edited the onyx rom 6.5 28011 and flashed for my htc
if you want you can also just i will put links n procedure to flash the rom.
ok. so will you put the links to the procedure. well coz after upgrading ur spl/ipl you can flash any rom you want.
reply
srgudhka said:
ok. so will you put the links to the procedure. well coz after upgrading ur spl/ipl you can flash any rom you want.
Click to expand...
Click to collapse
well
i not that i can load any rom my making rom.
like wise any specific rom i s made for specific mobile so as i make any rom specific for my mobilbe and even fon's battery level is 10% then also i can easily flash rom its in secs. and easily configure my cell easily..
mitesh20360 said:
well
i not that i can load any rom my making rom.
like wise any specific rom i s made for specific mobile so as i make any rom specific for my mobilbe and even fon's battery level is 10% then also i can easily flash rom its in secs. and easily configure my cell easily..
Click to expand...
Click to collapse
rather than keeping it a secret you should share your knowledge. everyone know one can cook a rom and flash it on his mobile. i suggest please be clear with your english.
no secret
sorry for my bad english.....
give me few days i will have to give link to software and procedure.
if any thing goes wrong with procedure then cell will brick and have hard format with no data in it.!!
so
its not any secret it is for knowledge.......
any can do it...!!!
Procedure for flashing (how i am flashing rom)
I have phone elfin 128mb ram.What you want softwares:
1) device info software for information regarding your device.
2) rom extractor... htc rom image editor version 0.4.0.51
AnDim
3) ROM builder. With this tool you can build a ROM (*.nbh)
from a rom parts (*.nb) in a comfortable interface.
by - Alexander "Dark Simpson" Simonov.
you can flash rom compatible with your CID (country/caller id) i.e. rom that you are going to flash must have cid of your phone.
steps:
Connect your Phone and establish Activesync Connection
find following for flashing:
Device ID : ELF0******
CID : ur cid. of phone.
GSM.nb radio file
IPL_H3.nb ipl h3 file
OS.nb os file extracted from built rom.
SPL.nb spl file
For deviceID you need to have software called deviceinfo.exe
http://forum.xda-developers.com/showthread.php?t=418892&page=18
download link: http://forum.xda-developers.com/attachment.php?attachmentid=129675&d=1258726424
then download any rom say onyx 6release. latest.
http://www.mediafire.com/?vjey0kz5ng0
then you will get RUU_signed.nbh
extract OS.nh from RUU_signed.nbh
save to one folder.
then you will need.
GSM.nb radio file
IPL_H3.nb ipl h3 file
SPL.nb spl file
extract same from follwoing links:
radio: http://forum.xda-developers.com/showthread.php?t=527048
choose as per yuor choice.
same extract
GSM.nb from *.nbh and save to folder.
similarly do for ipl/spl.
so you have following files needed for making your compatible rom:
IPL_H3.nb ipl h3 file
SPL.nb spl file
GSM.nb radio file
OS.nb os file extracted from built rom.
Step 2:
Now make rom for your elfin
you need to have software called
ROM builder. With this tool you can build a ROM (*.nbh)
from a rom parts (*.nb) in a comfortable interface.
Alexander "Dark Simpson" Simonov
link:http://www.real-radio.ru/htcrt/download/htcrt.zip
download the tool run in your pc, a pic that i have attached of that software.
then
run htcrt.exe
then start,
then ROM builder,
choose ur phone.
in that choose the relevant options for your phone/requirement
put Model ID:, Country ID:, Version: 3.14.706.02
language:WWE
firmware contents:
load all that you have stored in your folder the files you want.
IPL_H3.nb ipl h3 file
SPL.nb spl file
GSM.nb radio file
OS.nb os file extracted from built rom
then press
Build!
you will find that you have give name to your file named it
RUU_signed and it will make rom for your phone.
after it is completed it shows everythings seems to be ok
then close you have build your own rom compatible with your mobile.
RUU_signed.nbh
now flash it to your mobile.
how will you?????
steps:
have custome ruu files in one folder
following files must be there:
RUU_signed.nbh
EnterBootloader.exe
ErrorBattery.fig
ErrorUSB.fig
ModelID.fig
rapitool.exe
ROMUpdateUtility.exe
RUUGetInfo.exe
RUUResource.dll
Temp.bat
then run
ROMUpdateUtility.exe..
must connect your phone through usb.
start your phone pressing camera key you will see triple colour screen showing ipl/spl/
blue,green,red.
flash it from pc.
after every thing is over your will get message update complete.
your will get your rom flashed. but every data before flash must be back up.
this is bit lengthy but easy to use and flash....
if found probs reply me
well good one. tried it. works. but this is a lengthy process. rather dont you think cid unlocking it once will allow you to flash as many roms as you want. once you have unlocked it you just need to a custom ruu and a rom file. thats it. rest you know how to go about. i appreciate your method.
edit: wrong post - plz delete
Salve! I have a SIM lock Elfin KPN Netherlands. You can unlock? Not allow me to rewrite the IPL and SPL.
Hi developers,
ATHE 100
IPL - v1.00
ATHE 100
SPL-v3.05.0000 OR
USB (wend is to connect)
series (wend is unconnectable).
i have tried everything like i am not sleeping for two days. i tried to boot with ap3NewSpl and device shut it self down with error 270 while th progress bar was at %1. I could not find any rom for spl 3.05 (i don't know if there is)
I tried to flash with original rom and got the error spl 3.05 not allowed. Now i am so hopeless. Please help me to solve this.You can ask any question i will reply it immediately.
Thanks..
Any help? i had to solve this pls...
I tried to boot with a rom called ap3NewSpl but got error 270. At least can you direct me a rom for spl 3.0.x
i am figuring it out step by tep. i found the reason of ERROR 270 while updating with the ap3NewSpl is my device is cid locked. As far as i learned there is two way to do that, first cid unlock your device. I tried it but got error 300, sec on way is rom update with cid locked device by changing the nbh file. I am still trying. if any one have any idea pls help.
There are some updates and observations on my side. Since I'm an iOS developer windows mobile like across the bridge. Shortly, my device is cid locked it does not let go to custom roms, i can't upload original rom because my spl does not match so here is my suggestion:
When i try to boot the original rom(Advantage_HTC_WWE_2.21.405.2_1.50.00.00_Ship) it says found spl 1.10 spl 3.05 not allowed(something like that) What did after this point is opened exe with winrar and took out the RUU_Signed.nbh and than using NBH to NB i took the interiors out than opened the spl.nb file with note pad investigated the code found something like spl = 1.10.0000 changed them to spl = 3.05.0000 saved it closed it. After that i recombine the files with NB to NBH tool than put the RUU_Signed.nbh back the original rom file and changed it with the my modified RUU_Signed.nbh after all i run the update exe !!! this time !!! it did not gave me the found spl 1.10 error it go till %1 than i got error 270. this is a good sign since if i can find the reason of error 270 i can run the rom clearly. I am posting this updates may be some one get different ideas. I will be posting the updates.
Ok last time i tried the original rom and get error 270 because my device is cid locked, i was expecting that. This time i found 'Athena Rom Version 2.19.707.4 Radio Version 1.45.00.10 (No CID Unlock Needed)' first i run the rom got the error spl found 1.10 bla bla and than get the .nbh file out than did the process nbh to nb opened up the spl file changed the spl = 1.10.0000 to 3.05.0000 than tided up everything back to .nbh put it back run the exe got the error 270 again. This time getting error 270 meaningless since as it written on the file it don't need cid unlock. I need to find out the reason of this error deep into the rom. Any idea appreciated.
Palyancodr said:
There are some updates and observations on my side. Since I'm an iOS developer windows mobile like across the bridge. Shortly, my device is cid locked it does not let go to custom roms, i can't upload original rom because my spl does not match so here is my suggestion:
When i try to boot the original rom(Advantage_HTC_WWE_2.21.405.2_1.50.00.00_Ship) it says found spl 1.10 spl 3.05 not allowed(something like that) What did after this point is opened exe with winrar and took out the RUU_Signed.nbh and than using NBH to NB i took the interiors out than opened the spl.nb file with note pad investigated the code found something like spl = 1.10.0000 changed them to spl = 3.05.0000 saved it closed it. After that i recombine the files with NB to NBH tool than put the RUU_Signed.nbh back the original rom file and changed it with the my modified RUU_Signed.nbh after all i run the update exe !!! this time !!! it did not gave me the found spl 1.10 error it go till %1 than i got error 270. this is a good sign since if i can find the reason of error 270 i can run the rom clearly. I am posting this updates may be some one get different ideas. I will be posting the updates.
Click to expand...
Click to collapse
j have the same problem is that you find a solution
thank you in advance
Wow, I am revisiting what I posted after 10 years Well If you wonder, what happened to the x7500, I could not bring it to life so I have sold it.
I was a student back then, now I have two kids never have time for such kinds of activities at home now