Database Users

Prophet STUCK at BootScreen (2.10.0001 G4 Orange)

My Prophet Stuck at bootscreen , with displayed
IPL 2.10.0001
SPL 2.10.0001
GSM 02.07.20
OS 1.0.13.21
It happened after I tried to downgrade it.
PLEASE, tell me how to recover it ?
I had wizard before, and have some experience with backup/downgrade/upgrade/IMEI Change. Also I have backup of the phone, made by aWizard.
But this time i missed line that downgrade is NOT for G4 (2.xx.0001) ROMs. Is it possible to downgrade G4 (2.xx.0001) ROM ? Or is it possible to use iWizard w/o downgrading ?

Problem solved ! Please, stick this post up - I saw A LOT of people in this forum to ask how to resolve situation with "STUCK ON START-UP SCREEN" ... no one full answer. So ... solution :
1 step. Download one working for YOUR G3 or G4 version ROM. You can easly recognize the difference
G4 ROM on startup screen looks like
IPL 2.10.0001
SPL 2.13.0001
Look at last digit - if it's like 0001 - its G4 ROM. If it ends like 2.00.000, or just 2.00 - then its G3 hardware version.
So G4 (2.XX.0001) users can use any G4 ROM like this one ( tested by me ) -> ftp://xda:[email protected]/JAMin_WWE_213923_2139123_022021_ship.zip
G3 (2.XX) users can use this ROM -> ftp://xda:[email protected]_AKU23_023021_P12MB_PDAMobiz_v2307.exe This ROM is not tested by me, but I have read a lot of good responses about it.
2 step. First prepare the phone - full charge battery. After that, hold CAM + COMM buttons ( on the left side of the phone ) and reset it. You will be bringed to so sadly famous "three colors screen". Now connect your phone through USB and start Updating program that you have downloaded before. Sit back for about 15 minutes ( dont get nervous when it stucks on 80% ... it had to pass it after time). If everything goes smooth - after reset you must to have working phone again.
2A step. If you get error message ( like I did first time )
ERROR [294] : INVALID VENDER ID
You have to make few steps, a little more complicated then pressing NEXT buton couple of times.
First, download this cracked version of ROM Update Utility program. Can be found here -> ftp://[email protected]/Prophet/Tools/ROMUpdateUtility-NoVendorID.zip , then
1. Download and install WinRAR ( http://www.rarlabs.com/ )
2. Click with right button on program that updates ROM ( like RUU_Prophet_G3_2151327_AKU23_023021_P12MB_PDAMobiz_v2307.exe ) and choose Extract to...
3. Replace in directory you just extract archive file ROMUpdateUtility.exe with the same file from the archive you have downloaded early (ftp://[email protected]/Prophet/Tools/ROMUpdateUtility-NoVendorID.zip )
4. Now, run ROMUpdateUtility and this time there will be no WRONG VENDER ID error.
Good Luck

When I want to download the Zip file
Can be found here -> ftp://[email protected]/Pro...NoVendorID.zip
a pasword is required for the ftp. wher can i get this?

wimdieleman said:
When I want to download the Zip file
Can be found here -> ftp://[email protected]/Pro...NoVendorID.zip
a pasword is required for the ftp. wher can i get this?
Click to expand...
Click to collapse
Password is xda

Ok - so I downloaded:
ftp://[email protected]/Prophet/Tools/ROMUpdateUtility-NoVendorID.zip
I extracted this to my "c:\orange" drive. This means I have a file called: "C:\orange\ROMUpdateUtility.exe"
I also have a file called "C:\orange\JAMin_WWE_213923_2139123_022021_shi.exe" I extracted this and I have a file now called: "C:\orange\JAMin_WWE_213923_2139123_022021_shi\RUU_TOOLS\Prophet\WWE\ROMUpdateUtility.exe"
I replaced the 1st file over the 2nd. I ran the file "C:\orange\JAMin_WWE_213923_2139123_022021_shi\RUU_TOOLS\Prophet\WWE\ROMUpdateUtility.exe" after I replaced it and I get the following message: "ERROR [240] : FILE OPEN" and a message about not finding the file.
Please help!
[SOLVED]
I had to put the nk.nbf folder in the right place - as I didn't know 100% where, I just put it in ever folder and subfolder of the orange folder! I am on 95% now.... fingers crossed!
It is now stuck on 95% and gives a 326 error. ANy help?

thnx
got the same problem
solved thnx to you great

rockgeek said:
Ok - so I downloaded:
ftp://[email protected]/Prophet/Tools/ROMUpdateUtility-NoVendorID.zip
Hi
Clicked on the above link and its not there,has it been removed ?
Rgds
Clicon
Click to expand...
Click to collapse

Stuck @ Qtek Splash Screen "Help"
I have this issue before and the solution page under PDAMobiz has been taken down. The original page for resolving this issue was linked under this http://forum.xda-developers.com/showthread.php?t=273723 which refers to http://en.pdamobiz.com/en/forum/forum_posts.asp?TID=440&PN=1 since then this page has changed / not working anymore.
I am currently stuck at he Qtek Splash screen that display the OS, GSM etc. pressing the camera, record button and softreset w/ the stylus does not get me to the bootloader page 3 colors.
I have all the original software that this page originally linked downloaded but need the steps to restoring the phone to a working active sync usb condition or bootloader screen for rom reload can any one please assist in providing a solution.

rockgeek said:
Ok - so I downloaded:
ftp://[email protected]/Prophet/Tools/ROMUpdateUtility-NoVendorID.zip
I extracted this to my "c:\orange" drive. This means I have a file called: "C:\orange\ROMUpdateUtility.exe"
I also have a file called "C:\orange\JAMin_WWE_213923_2139123_022021_shi.exe" I extracted this and I have a file now called: "C:\orange\JAMin_WWE_213923_2139123_022021_shi\RUU_TOOLS\Prophet\WWE\ROMUpdateUtility.exe"
I replaced the 1st file over the 2nd. I ran the file "C:\orange\JAMin_WWE_213923_2139123_022021_shi\RUU_TOOLS\Prophet\WWE\ROMUpdateUtility.exe" after I replaced it and I get the following message: "ERROR [240] : FILE OPEN" and a message about not finding the file.
Please help!
[SOLVED]
I had to put the nk.nbf folder in the right place - as I didn't know 100% where, I just put it in ever folder and subfolder of the orange folder! I am on 95% now.... fingers crossed!
It is now stuck on 95% and gives a 326 error. ANy help?
Click to expand...
Click to collapse
Help, very new to this and followed these steps and bingo also stuck on with the 326 error! Has it been solved?

Guess that's a no, then?

same problem here , stuck in 95%

please help me!! my problem is some ERROR 302 and dont let pass from 98% im newbe and need help tnx

dpast said:
I have this issue before and the solution page under PDAMobiz has been taken down. The original page for resolving this issue was linked under this http://forum.xda-developers.com/showthread.php?t=273723 which refers to http://en.pdamobiz.com/en/forum/forum_posts.asp?TID=440&PN=1 since then this page has changed / not working anymore.
I am currently stuck at he Qtek Splash screen that display the OS, GSM etc. pressing the camera, record button and softreset w/ the stylus does not get me to the bootloader page 3 colors.
I have all the original software that this page originally linked downloaded but need the steps to restoring the phone to a working active sync usb condition or bootloader screen for rom reload can any one please assist in providing a solution.
Click to expand...
Click to collapse
same problem here..
does anyone has a solution for this one???

links are all dead can some one help ?

read from here http://wiki.xda-developers.com/index.php?pagename=HTC_Prophet
and here http://forum.xda-developers.com/showthread.php?t=353547
read carefully ok...

Stuck in bootloader after failed flash

Hi, got some problems with one of my employes Herald (not simlocked or anything).
It ended up on my desk after complaints about it rebooting by itself every minute or so. I figured I could sort it out by upgrading to wm6. Wen to HTCs website and downloaded the official RUU (HTC_P4350_SVE_4.17.413.2_4.1.13.44_02.94.90_Ship.exe). Everything went along fine and I left it upgrading on my desk and went for lunch.
When I got back it said that the update had failed and I followed the recover function but without success.
Now Im stuck in bootloader mode, and when I try to update it again the current image version is listed as blank and I get to about 1-2 percent before it shuts down and gives "ERROR [244]: INVALID MODEL ID".
Any suggestions on what to do?

Further information...
IPL 4.17.0001
SPL 4.17.0000
When i do a hard reset, after it says format complete it boots up and freezes with a green gradient across the screen.

You can try using USPL or HARDSPL to flash.
The USPL will get around CID locks
This is from ivan's A Herald's Guide to Flashing Aserg, USPL and HARD-SPL - xda-developers
II. How do I flash an NBH file?
Warning: To use the NBH ways, you MUST have a SPL of 4.0 or higher. If you have a lower SPL, you WILL brick your phone.
a. USPL
Step 1. Download Herald-USPL-Beta3.
Step 2. UnZIP the file into a folder on your Desktop. Let's call it "MyFirstROM" for simplicity's sake. Notice that there is a folder called RUU within this folder now. Keep that in mind.
Step 3. Download your NBH file and unZIP or unRAR it into that RUU folder. Make sure that that NBH file ends up in the RUU folder, not within a folder inside the RUU folder.
Step 4. Place your phone into flightmode.
Step 5. Go back to the MyFirstROM folder and then run USPL.exe
Step 6. Follow the directions on the screen. EXACTLY.
Your screen on your cell phone will go white around the 75% part of the "second step" now.
ActiveSync will LOOSE its connection.
Step 7. One step 3 on that black window, the RUU flasher will pop up. Just follow the steps.
That's it. Welcome to the flasher's world.

Thanks for the reply,
First, I cant get activesync to find the phone, only evidence of contact in between the phone and PC is that its listed as [Windows CE USB Devices+PocketPC USB Sync] in device manager. I tried to uspl flash with ASERG.8, and it stops at "STEP 1/3...."
I downloaded mtty to see if it could connect, and it did.
Any further suggestions on what might work!

uninstall..reset.. clean install would probably get activesync to work w the phone..

Reinstalled activesync without any change. And soft/hard reseted everything…
Tried to flash via sd as per instructions in another thread, got to "checking SD contents" and then straight to triple-color bootloader.
Help me please! ;D

Cant help getting the feeling that Im completely screwed...
Cant get activesync to recognize it, only way to get it to light up is via bootloader (camera + reset button), everything ive tried to flash it with hangs almost instantly.
As a complete novice my guess is that the current rom is corrupted and I badly need advice on how to go on. The sd-flash seems quite logical but I cant get it to work. Ive tried to overwrite my sd with 00-values in winhex and then placing the original ruu [HERAIMG.nbh] (through windows, is there a way to write data with winhex?) on the card without any success.
Any suggestions on what to try is much appreciated.

Sounds like the SPL got corrupted or partially written only... sorry. Repair center time. You can also placing your Stock RUU's nbh file into your SD card and renaming it to... umm.. I forget... and then flashing FROM the phone.

facdemol said:
You can't simply place the rom file to the card and hope the device will read it in this way. In my time working for pda service, we used WINHex to format the card (to RAW-unformatted) and then we wrote the rom file in RAW format to the card. Your card looks like an endless stream of hexazecimal values. Only winhex recognises this format, if you insert the card to the computer, it will simply ask you to format it. After inserting this card into the pda, it will start the upgrade . The order of this operation was, as I remember, to fill the card with 0000 values (there is an option in WINHex, a kind of format) then write the rom file to the card in RAW mode. Then insert the card to the device.
Click to expand...
Click to collapse
Thanks for the reply, before giving up and sending it in for repair I would like to give the sd-flash a proper try... So far Ive managed to format the card with winhex but I cant really figure out how to write to the card in raw format. Could anyone point me in the right direction?

i managed to do the steps said above ... formated the card in RAW format etc but still the phone won't turn on ... it will only stay in bootloader ...

diabolic53 said:
i managed to do the steps said above ... formated the card in RAW format etc but still the phone won't turn on ... it will only stay in bootloader ...
Click to expand...
Click to collapse
Care to enlighten me on how you did that?

I've been reading a lot lately.. I wonder if the phones are savageble... something about flashing but bypassing the radio check... Also, the universal has an RUU that bypasses any checks before it flashes... this would be great for us to have... I'm asking around...

g4rwin said:
Care to enlighten me on how you did that?
Click to expand...
Click to collapse
whell i opened the mem card with winhex filled all the blocks with 00 and then i opened the nbf file also with winhex and copied the content in hex format on to the card ....but still no success ..

ivanmmj said:
I've been reading a lot lately.. I wonder if the phones are savageble... something about flashing but bypassing the radio check... Also, the universal has an RUU that bypasses any checks before it flashes... this would be great for us to have... I'm asking around...
Click to expand...
Click to collapse
if you find it please tell us about it cos a lot of phones are getting bricked ...

If I'm correct, you told us a few post above thisone you placed your SD card with the imghera.nbh and got "checking sd conents" and then it went to bootloader.
As far as i can recall you need to get your Herald into bootloader first and then place your SD card with the IMGHERA.nbh file on it. Then it should start reading the image from, your SD card.
Judging from your first post you haven't been using the asigned RUU from the HTC website if this was your first rom flash to WM6 and you got a vendor error. Try to convert and use that one when you flash from sd card.

jappo01 said:
If I'm correct, you told us a few post above thisone you placed your SD card with the imghera.nbh and got "checking sd conents" and then it went to bootloader.
As far as i can recall you need to get your Herald into bootloader first and then place your SD card with the IMGHERA.nbh file on it. Then it should start reading the image from, your SD card.
Click to expand...
Click to collapse
Ive tried all possible ways, if I pop the sd card in while already in bootloader, nothing happens at all.
jappo01 said:
Judging from your first post you haven't been using the asigned RUU from the HTC website if this was your first rom flash to WM6 and you got a vendor error. Try to convert and use that one when you flash from sd card.
Click to expand...
Click to collapse
Ive been trying to flash with the WM6 RUU I downloaded from HTC's site (the one that bricked it) since that is the only local (swedish) and official one I could find. Have I misinterpreted it all and the only thing that could do the trick for me is WM5.1?
Ive also been trying to contact the HTC service dept for over a weeks time ending up in a deadend overfilled voicemailbox - meanwhile my warrantyperiod ran out... Any suggestion on what to do?

duprade said:
You can try using USPL or HARDSPL to flash.
The USPL will get around CID locks
This is from ivan's A Herald's Guide to Flashing Aserg, USPL and HARD-SPL - xda-developers
II. How do I flash an NBH file?
Warning: To use the NBH ways, you MUST have a SPL of 4.0 or higher. If you have a lower SPL, you WILL brick your phone.
a. USPL
Step 1. Download Herald-USPL-Beta3.
Step 2. UnZIP the file into a folder on your Desktop. Let's call it "MyFirstROM" for simplicity's sake. Notice that there is a folder called RUU within this folder now. Keep that in mind.
Step 3. Download your NBH file and unZIP or unRAR it into that RUU folder. Make sure that that NBH file ends up in the RUU folder, not within a folder inside the RUU folder.
Step 4. Place your phone into flightmode.
Step 5. Go back to the MyFirstROM folder and then run USPL.exe
Step 6. Follow the directions on the screen. EXACTLY.
Your screen on your cell phone will go white around the 75% part of the "second step" now.
ActiveSync will LOOSE its connection.
Step 7. One step 3 on that black window, the RUU flasher will pop up. Just follow the steps.
That's it. Welcome to the flasher's world.
Click to expand...
Click to collapse
Hi I try tu patch IPL/SPL with hard spl but with error, now my herald stuck in boot mode. IPL/SPL 1.09.0001. He probbably is from some russia operator (rusian diacritics on keyboard).
How can I try to make him alive?

[B]Load any rom you want in your any htc mobile not need to unlock!!![/B]

Hii i have elfin and not unlocked my elfin but still i can load any rom in my elfin have loaded 6.1,6.5,and many more.
Want to know will be posting procedure to SAFELY can be loaded in to your HTC MOBILE
miteysh.

mitesh20360 said:
Hii i have elfin and not unlocked my elfin but still i can load any rom in my elfin have loaded 6.1,6.5,and many more.
Want to know will be posting procedure to SAFELY can be loaded in to your HTC MOBILE
miteysh.
Click to expand...
Click to collapse
can u please put a little more light on this

mitesh20360 said:
Hii i have elfin and not unlocked my elfin but still i can load any rom in my elfin have loaded 6.1,6.5,and many more.
Want to know will be posting procedure to SAFELY can be loaded in to your HTC MOBILE
miteysh.
Click to expand...
Click to collapse
couple of questions I wanna ask u..
1. when u bought ur device was it a brand new one or a used one??
2.are u sure ur device is not locked?? did u check you your IPL??
3.what is your IPL/SPL compination??
hope that's not much.. thanks

and by lock, are we talking about cid-lock or sim-lock?

crapula512 said:
and by lock, are we talking about cid-lock or sim-lock?
Click to expand...
Click to collapse
Yeahhh... i was thinking about it too

Answers!!!!!!
I bought my elfin in the year 2008.
not knowing how to use after few months i flashed elf rom and found that my device was restarting and of no use....
i learned about unlocking from this website after seating hours and hours.
i have gsm one.
elfin.

How to flash any rom...
I have original rom loaded and with ipl/spl of 2.xx
but now i have ipl/spl 3.14.com.
loaded more that 100's of roms of 6., 6.1, 6.5.
any rom.
first of all you need to know your device configuration to load any rom.
if you have detailed configuration then you can load it.
currently loaded wm6.5 28011 onyx. rom.
radio : 3.34

procedure!!!!!!
i will be enclosing the safe procedure for flashing...
no worry.....
you will learn to load and make your own flash...
give to few days time..

mitesh20360 said:
I have original rom loaded and with ipl/spl of 2.xx
but now i have ipl/spl 3.14.com.
loaded more that 100's of roms of 6., 6.1, 6.5.
any rom.
first of all you need to know your device configuration to load any rom.
if you have detailed configuration then you can load it.
currently loaded wm6.5 28011 onyx. rom.
radio : 3.34
Click to expand...
Click to collapse
if your spl says spl 3.14.com.... it means you have done HSPL... and thats the normal thing everybody do to go in for safe cookedroms flashing..
sorry bro there is nothing special about your case

opss!!!
but i have changed he ipl/spl/radio/flashed/many roms/ changed pagepool file/ all that can brick a fone..
i have recently edited the onyx rom 6.5 28011 and flashed for my htc
if you want you can also just i will put links n procedure to flash the rom.

ok. so will you put the links to the procedure. well coz after upgrading ur spl/ipl you can flash any rom you want.

reply
srgudhka said:
ok. so will you put the links to the procedure. well coz after upgrading ur spl/ipl you can flash any rom you want.
Click to expand...
Click to collapse
well
i not that i can load any rom my making rom.
like wise any specific rom i s made for specific mobile so as i make any rom specific for my mobilbe and even fon's battery level is 10% then also i can easily flash rom its in secs. and easily configure my cell easily..

mitesh20360 said:
well
i not that i can load any rom my making rom.
like wise any specific rom i s made for specific mobile so as i make any rom specific for my mobilbe and even fon's battery level is 10% then also i can easily flash rom its in secs. and easily configure my cell easily..
Click to expand...
Click to collapse
rather than keeping it a secret you should share your knowledge. everyone know one can cook a rom and flash it on his mobile. i suggest please be clear with your english.

no secret
sorry for my bad english.....
give me few days i will have to give link to software and procedure.
if any thing goes wrong with procedure then cell will brick and have hard format with no data in it.!!
so
its not any secret it is for knowledge.......
any can do it...!!!

Procedure for flashing (how i am flashing rom)
I have phone elfin 128mb ram.What you want softwares:
1) device info software for information regarding your device.
2) rom extractor... htc rom image editor version 0.4.0.51
AnDim
3) ROM builder. With this tool you can build a ROM (*.nbh)
from a rom parts (*.nb) in a comfortable interface.
by - Alexander "Dark Simpson" Simonov.
you can flash rom compatible with your CID (country/caller id) i.e. rom that you are going to flash must have cid of your phone.
steps:
Connect your Phone and establish Activesync Connection
find following for flashing:
Device ID : ELF0******
CID : ur cid. of phone.
GSM.nb radio file
IPL_H3.nb ipl h3 file
OS.nb os file extracted from built rom.
SPL.nb spl file
For deviceID you need to have software called deviceinfo.exe
http://forum.xda-developers.com/showthread.php?t=418892&page=18
download link: http://forum.xda-developers.com/attachment.php?attachmentid=129675&d=1258726424
then download any rom say onyx 6release. latest.
http://www.mediafire.com/?vjey0kz5ng0
then you will get RUU_signed.nbh
extract OS.nh from RUU_signed.nbh
save to one folder.
then you will need.
GSM.nb radio file
IPL_H3.nb ipl h3 file
SPL.nb spl file
extract same from follwoing links:
radio: http://forum.xda-developers.com/showthread.php?t=527048
choose as per yuor choice.
same extract
GSM.nb from *.nbh and save to folder.
similarly do for ipl/spl.
so you have following files needed for making your compatible rom:
IPL_H3.nb ipl h3 file
SPL.nb spl file
GSM.nb radio file
OS.nb os file extracted from built rom.
Step 2:
Now make rom for your elfin
you need to have software called
ROM builder. With this tool you can build a ROM (*.nbh)
from a rom parts (*.nb) in a comfortable interface.
Alexander "Dark Simpson" Simonov
link:http://www.real-radio.ru/htcrt/download/htcrt.zip
download the tool run in your pc, a pic that i have attached of that software.
then
run htcrt.exe
then start,
then ROM builder,
choose ur phone.
in that choose the relevant options for your phone/requirement
put Model ID:, Country ID:, Version: 3.14.706.02
language:WWE
firmware contents:
load all that you have stored in your folder the files you want.
IPL_H3.nb ipl h3 file
SPL.nb spl file
GSM.nb radio file
OS.nb os file extracted from built rom
then press
Build!
you will find that you have give name to your file named it
RUU_signed and it will make rom for your phone.
after it is completed it shows everythings seems to be ok
then close you have build your own rom compatible with your mobile.
RUU_signed.nbh
now flash it to your mobile.
how will you?????
steps:
have custome ruu files in one folder
following files must be there:
RUU_signed.nbh
EnterBootloader.exe
ErrorBattery.fig
ErrorUSB.fig
ModelID.fig
rapitool.exe
ROMUpdateUtility.exe
RUUGetInfo.exe
RUUResource.dll
Temp.bat
then run
ROMUpdateUtility.exe..
must connect your phone through usb.
start your phone pressing camera key you will see triple colour screen showing ipl/spl/
blue,green,red.
flash it from pc.
after every thing is over your will get message update complete.
your will get your rom flashed. but every data before flash must be back up.
this is bit lengthy but easy to use and flash....
if found probs reply me

well good one. tried it. works. but this is a lengthy process. rather dont you think cid unlocking it once will allow you to flash as many roms as you want. once you have unlocked it you just need to a custom ruu and a rom file. thats it. rest you know how to go about. i appreciate your method.

edit: wrong post - plz delete

Salve! I have a SIM lock Elfin KPN Netherlands. You can unlock? Not allow me to rewrite the IPL and SPL.

help me to save my herald

When i put on my Herald stop in bootloader.....
When i try to flash from SD, my Herald says:
-----
Checking SD Contents
Invalid Certificate
Press Any key to continue
-----
What happened?
how to solve?
I can not even with RUU
ilp 1.08.0001
spl 1.08.0001
Help me!!!

1.Connect the pc and download original rom.
2.Run RUU on your pc and flashig phone
other
1. download original rom
2. unpack the original shipped rom (winrar)
3. extracking ruu_signed.nbh
4. rename ruu_signed.nbh to heraimg.nbh
5. format storage card winth fat32
6. copy heraimg.nbh
7. insert the card in pda and run in bootloader mode

I have a few things for you to consider. The first is your IPL and SPL numbers. Your numbers are 1.08.xxxx You should start by searching for a safe method for flashing your phone based on such a low IPL (if there even is a method). From what I understand, in order to flash these custom roms you MUST be HardSPL'd.
Click here for PDF instructions
If you do not have an IPL of 4.xx.xxxx or higher then you cannot HardSPL your herald.
I assume that because you are not HardSPL'd with the security fix not in place you are unable to flash anything other than a stock rom. My suggestion is to look for an OEM or stock rom update that can hopefully get you to a higher IPL/SPL number. I know that my service provider (t-mobile) has a download available for the wing so look into that first.
Hopefully another member can clarify if you can or cannot flash a custom rom with an IPL as low as yours. I hope this helps in some way. Good luck.
-Dan

I just sorted my phone
hi,
if you haven't fixed your issue yet,
the best way is to have a good read of the two discussions i've given below. both require you to have a working windows mobile device. it could even be a PDA.
using which u need to create a goldcard.
i suggest you use the qmat method as described in this post
forum.xda-developers.com/showpost.php?p=3224093&postcount=100
either ways, read the forums fully, then see what you can do. one of these will work for sure, once you get the gold card created, u can load any rom, the original or even a higher one from htc herald.
the urls u need to review are
forum.xda-developers.com/showthread.php?t=417930
forum.xda-developers.com/showthread.php?t=572683
this will help you get your phone back... if its loading into bootloader, it means ur phone can still be saved.
ps copy and paste the above links

[Guide] Possible way for flashing semi-bricked HD2s (corrupt model ID)

Hi guys, after 48 hours of excessive research and trials and errors I've found a way to flash NBH roms to a friend of mine's HD2 which has corrupt model ID (some strange symbols in place of the model ID in bootloader screen). Unfotunatelly his device has hardware problems so even I flashed it, It was not fixed.
Anyway I've decided to post this here, so everyone with this problem can use the solution to flash their devices.
Note: you must have HSPL (installed before the corruption) or goldcard (not tested with goldcard) for this to work.
So the problem is RUU flasher shows error 244: Invalid model id. It's because of the corrupt ID. What can be done? In short:
Make NBH with matching ID
1. Mtty -> info 0
2. Copy model ID symbols (you should paste exactly the same symbols in txt file!!)
3. Use YANG to extract files from any rom/radio NBH. (http://code.google.com/p/htc-flasher/wiki/YANG)
4. Use YANG to create back the custom NBH with your corrupt model ID. (use exactly the same symbols for model ID !!)
5. Flash NBH with RUU flasher, or SD card. (I prefer SD card because you can see more details)
Note 2: If you're flashing a device with HSLP DO NOT INCLUDE SPL NB file in the NBH !!!
I've tested this even with MAGLDR 1.13 and it flashes well.
So far the only sollution to this problem was JTAG, I hope this will change. Please give feedback in this topic for any success/no success, and also for goldcard with regular SPL.
Have fun!

yea, good one, be interested in seeing this confirmed, , bet there's thousands of hd2s in dusty drawers around teh world, just waiting to be revived.