Database Users

[Q] Wont go into recovery mode

I was trying to install a new kernel so I could overclock, and I could not get it into recovery mode. I tried the normal, turn off+hold volume down key+turn on, method. I also used the boot into recovery mode option from CWM (Acer Recovery)
I thought it may have something to do with my other software issues causing issue, so I did a master reset. It got everything back to normal, reloaded my info and backed up info, and installed rootcheck (which confirmed root and busybox) and superuser, and CWM, and have the kernel on my sd card. I tried booting into recovery mode again and it wont work
The error I get is the little tranlucent android dude with the gears rolling and then suddenly the gears stop and I get the warning sign, yellow triangle with exclamation mark.
Anyone know why this may be?

phoenixbennu said:
I was trying to install a new kernel so I could overclock, and I could not get it into recovery mode. I tried the normal, turn off+hold volume down key+turn on, method. I also used the boot into recovery mode option from CWM (Acer Recovery)
I thought it may have something to do with my other software issues causing issue, so I did a master reset. It got everything back to normal, reloaded my info and backed up info, and installed rootcheck (which confirmed root and busybox) and superuser, and CWM, and have the kernel on my sd card. I tried booting into recovery mode again and it wont work
The error I get is the little tranlucent android dude with the gears rolling and then suddenly the gears stop and I get the warning sign, yellow triangle with exclamation mark.
Anyone know why this may be?
Click to expand...
Click to collapse
Which kernal are you trying to install? Are you installing via cwm? What version are you running? Are you holding vol-key until after the Acer logo shows up and then keeping the vol rocker held until you see "booting recovery..."?
Have you successfully booted into recovery in the past?

thanks for the response. It seems the recovery image was corrupted or unknown according to cwm. i had to install the cwm one and it works just fine.

Great
phoenixbennu said:
thanks for the response. It seems the recovery image was corrupted or unknown according to cwm. i had to install the cwm one and it works just fine.
Click to expand...
Click to collapse
Glad you got it working

Installing Acer recovery installer does not install cwm. You have to select cwm from the list and click install recovery. Sounds like you figured it out, though.
Sent from my A500 using Tapatalk

A500 not switching to recovery
I also have a new A500 which already had 3.2 stock installed and it has never allowed me to go into recovery mode. I can use iconiaroot and get to a certain point with that but to install a custom rom, I haven't been able to. I want to so any ideas? I did however get to install the Acer_A501_0.017.01_PA_ATT which is about as much progress as I have got. My thought was to downgrade first then install a custom rom like Taboonay but I can't get into recovery. Please help.

bmills74 said:
I also have a new A500 which already had 3.2 stock installed and it has never allowed me to go into recovery mode. I can use iconiaroot and get to a certain point with that but to install a custom rom, I haven't been able to. I want to so any ideas? I did however get to install the Acer_A501_0.017.01_PA_ATT which is about as much progress as I have got. My thought was to downgrade first then install a custom rom like Taboonay but I can't get into recovery. Please help.
Click to expand...
Click to collapse
Why are you trying to get into recovery? What is it you are actually trying to do? If you are stock, then getting into recovery has little value, so it would help if we know what you're actually trying to do?
TD

Why recovery
I am trying to install Taboonay. The way I see it from peoples post is that with a stock 3.2 the only way to install Taboonay is to be able to go into recovery. Do you have a better solution? Or anyone? There is alot of information out there. It's hard to sort through it sometime.
---------- Post added at 05:07 PM ---------- Previous post was at 05:02 PM ----------
bmills74 said:
I am trying to install Taboonay. The way I see it from peoples post is that with a stock 3.2 the only way to install Taboonay is to be able to go into recovery. Do you have a better solution? Or anyone? There is alot of information out there. It's hard to sort through it sometime.
Click to expand...
Click to collapse
I now know that recovery is locked by the system and one has to change the update.zip file. Right?

bmills74 said:
I am trying to install Taboonay. The way I see it from peoples post is that with a stock 3.2 the only way to install Taboonay is to be able to go into recovery. Do you have a better solution? Or anyone? There is alot of information out there. It's hard to sort through it sometime.
---------- Post added at 05:07 PM ---------- Previous post was at 05:02 PM ----------
I now know that recovery is locked by the system and one has to change the update.zip file. Right?
Click to expand...
Click to collapse
In order to flash a custom rom, you need to flash a custom recovery (in this case cwm) flashing custom roms with the stock Acer recovery isn't possible without out the update.zip being signed by acer.
Sent from my Desire HD using xda premium

bmills74 said:
I am trying to install Taboonay. The way I see it from peoples post is that with a stock 3.2 the only way to install Taboonay is to be able to go into recovery. Do you have a better solution? Or anyone? There is alot of information out there. It's hard to sort through it sometime.
---------- Post added at 05:07 PM ---------- Previous post was at 05:02 PM ----------
I now know that recovery is locked by the system and one has to change the update.zip file. Right?
Click to expand...
Click to collapse
Read through these forms and you'll get the information you need. But, before you can install a custom ROM you need to root(#) your device first. Once you get root then you have to install CWM which is a custom recovery. The Stock Recovery that comes installed will ONLY install updates signed by ACER therefore it is worthless. That's why you need something like CWM.
Hope this helps,
TD

Please do some reading mate as I can predict your future post....
You seem to have read through a bit of info skipping the main and most important parts. If you don't follow instructions TO THE LETTER your next post will be along the lines of "Help, I've bricked my A50*"....

Yes, thank you for replying, but no thanks. If your on here to help people, then help them. Learn some help desk manners.
If your on here to show your knowledge, then you have failed. The whole point of Linux is to help and contribute to a better os then what's available through retail. Careful or the point will get lost in translations.
Sent from my A500 using XDA

[Q] [+Problem] Can't boot into CWM Recovery

Hi,
I really love my Nook Color (firmware 1.2/blue dot on package) which I picked up two days ago. I Installed CM7 on the microSD card right away and it's running fine overall. -- However, I cannot boot into recovery. - DANG!!!#[email protected]#
I have looked allover this forum and beyond, but none of the other threads deal with my NC's CWM problem - or offer a working solution I could understand/use...
The ingredients I took to cook up my CM7 install:
1.) "generic-sdcard-v1.3.img" ('extracted' to SD using Win32DiskMgr)
2.) "update-cm-7.0.3-encore-signed"
3.) "gapps-gb-20110613-signed"
Everything installed OK, including CWM 3.0.2.8., which is showing as app.
BUT... no matter how [often] I try to boot into CWM Recovery, it always boots straight into CM7.
(And, yes... I've tried all the "N" + "Power" button press combinations, I think... but none of them worked).
MY QUESTIONS:
- Any idea what I did wrong? Why can't I boot into recovery?
- How can I fix this without having to use ADB? (Note: Yes, I am willing to learn, but command-line programming is not exactly my idea of fun). I was hoping there actually is a simple fix to this problem... something like "place this [...] on your SD card and boot", or so???
...Thanks for your help & suggestions.

Have you tried holding down the power from cm7 and selecting reboot into recovery?
Sent from my LG Optimus V using Tapatalk

I think i know your problem. The 1.3 installer image is not fully compatible with CM7.0.3. You might be able to update to the RC or a nightly and get it to work. Otherwise you are going to have to remake the SD card.
Sent from my LG Optimus V using Tapatalk

koopakid08 said:
I think i know your problem. The 1.3 installer image is not fully compatible with CM7.0.3. You might be able to update to the RC or a nightly and get it to work. Otherwise you are going to have to remake the SD card.
Click to expand...
Click to collapse
Thanks for your help, koopakid08! After flashing CM7 three more times in the meantime, I had that hunch, too...
Can you tell me what to use if one of my "components" is no good(?)??
I want to run CM7 off my microSD (not the eMMS install). -- So.. what do you recommend me to do, as I'm afraid I don't quite understand what you mean with "update to RC or nightly"...
Is my issue related to the CM7 version, or is it the "generic-sdcard-v1.3" image?? If it's the CM build (7.0.3), there is no RC available for the "encore" yet; just a nightly (#177) dated 8/31/2011.
If the problem is the sdcard 1.3 image, what else is there I can use to run CM7 off my microSD?
-- Thanks!
---------- Post added at 11:48 PM ---------- Previous post was at 11:34 PM ----------
Interesting... just found another guide on the web. Didn't see that all weekend .. :-(
http://androidforums.com/nookcolor-all-things-root/352736-how-install-cm7-your-nook-color.html
I'll try this one, hope it's finally working also for me...
---------- Post added 19th September 2011 at 12:31 AM ---------- Previous post was 18th September 2011 at 11:48 PM ----------
I can't believe it was THAT easy... [email protected]@##%$&$%@%*(!%%^& !!!!!!
It was indeed either the sdcard image, or CM7.0.3. Which one, I really don't care anymore, as I just flashed the latest CM nightly (#177) ... and CWM Recovery ...WORKS [:gasp:] !!!
It's a bit late now here in Chicagoland, so I better hit the pillow (it's a school night ..ha ha... tomorrow].
I will post instructions later; just in case someone else runs into the same issue.
Thanks, again, koopakid08, for getting me on the right track.
Good Night!!

Just in case you want to know what the problem was. It was the CM version you were using. The 1.3 image only works with cm7.1 versions. Glad you got it figured out.
Sent from my NookColor using Tapatalk

Just an additional observation... You are using an old version of CWR. The newest is 3.2.0.1.

I don't know if you got everything sort out but, bear in mind: booting off uSD has NOTHING to do with CwM R., whatever version.
Moreover, you boot into "recovery", not boot into "clockworkmod recovery"
If you intend to run off uSD, you can completely ignore anything about ROM Manager or CwM Recovery since those are not go together and it causes more headache than help.

Reverting back to hc 3.2

Hi,
I wanted to ask if I can revert back to Honeycomb 3.2 if I have Bootloader v3.01?
Thanks.

Fox05 said:
Hi,
I wanted to ask if I can revert back to Honeycomb 3.2 if I have Bootloader v3.01?
Thanks.
Click to expand...
Click to collapse
Short answer...yes...a nand restore is possible...works best with the same recovery image
used for the backup when it was first made...issues I've come across are md5 errors,
missing boot and recovery .img's. I'be done this twice...once with the early leaked ics,
restored just fine.....last nite when I tried with my partners tab we had all sorts of probs,
by the time we realised why it was too l8...thankfully I had an old 3.1 backup we threw on
then OTA'ed up to 3.2 again....same applies going back to ics via nand.
Otherwise its a full downgrade via timmydeans euu or a full package update.zip from vaches thread....
be interested in knowing how u get on, good luck

dibb_nz said:
Short answer...yes...a nand restore is possible...works best with the same recovery image
used for the backup when it was first made...issues I've come across are md5 errors,
missing boot and recovery .img's. I'be done this twice...once with the early leaked ics,
restored just fine.....last nite when I tried with my partners tab we had all sorts of probs,
by the time we realised why it was too l8...thankfully I had an old 3.1 backup we threw on
then OTA'ed up to 3.2 again....same applies going back to ics via nand.
Otherwise its a full downgrade via timmydeans euu or a full package update.zip from vaches thread....
be interested in knowing how u get on, good luck
Click to expand...
Click to collapse
You mean that I can revert back to HC 3.2 by doing a CWM Restore and flashing firmware(s) that vache has provided?

On hc bootie
Yeh restore back
If restore is corrupted then yeh vaches thread

dibb_nz said:
On hc bootie
Yeh restore back
If restore is corrupted then yeh vaches thread
Click to expand...
Click to collapse
But no risk bricking?

Plenty of info here
Post 13 for update.zip method
http://forum.xda-developers.com/showthread.php?t=1626724
Euu downgrade how to
http://forum.xda-developers.com/showthread.php?t=1516012
---------- Post added at 02:18 AM ---------- Previous post was at 02:12 AM ----------
Fox05 said:
But no risk bricking?
Click to expand...
Click to collapse
lol, yeh m8 always a risk but seriously if u can follow instructions u won't have any probs..

But can I download the 3.2/3.1/3.0.1 stock ROM and just flash it in CWM in ICS leak without anything else?

Fox05 said:
But can I download the 3.2/3.1/3.0.1 stock ROM and just flash it in CWM in ICS leak without anything else?
Click to expand...
Click to collapse
yes if you're talking about the stock roms from vaches thread, you need the full rom package - you cant just use an 'update' package as they need a full rom to work properly....
for instance my original HC3.2.1 Stock build is 7.014.15_COM_GEN1
and theres no FULL Rom for 3.2.1, so i have to use the HC 3.2 FULL instead
.....Acer_A500_7.006.03_COM_GEN1.zip
Once flashed, thankfully I recieve the 2 small OTA Updates to get up to 3.2.1 again
Another couple of days the ICS OTA d/l'ed and installed with no probs....
is that clearer or am i making things worse????

dibb_nz said:
yes if you're talking about the stock roms from vaches thread, you need the full rom package - you cant just use an 'update' package as they need a full rom to work properly....
for instance my original HC3.2.1 Stock build is 7.014.15_COM_GEN1
and theres no FULL Rom for 3.2.1, so i have to use the HC 3.2 FULL instead
.....Acer_A500_7.006.03_COM_GEN1.zip
Once flashed, thankfully I recieve the 2 small OTA Updates to get up to 3.2.1 again
Another couple of days the ICS OTA d/l'ed and installed with no probs....
is that clearer or am i making things worse????
Click to expand...
Click to collapse
I'm understanding more but is there a way to find out which ROM was on my tablet out-of-the-box (for the first time I started using my tablet )?

Also vache's thread doesn't have Acer_A500_7.006.01_COM_GEN1 only GEN2. What's the difference between those two? Do you happen to know the build before Acer_A500_7.006.01_COM_GEN1?
Thanks.

Fox05 said:
I'm understanding more but is there a way to find out which ROM was on my tablet out-of-the-box (for the first time I started using my tablet )?
Click to expand...
Click to collapse
.maybe 4.010.24-38 range ??? But I'm guessing ..... depends what region u are...google yr build no. Good way 2 fin out and U may find a full stock rom - then u only need to flash it and wait for the ota
U could go all the way back to 3.0.1 and your tab will update itself to the right ,build.....then
U only need to pick from gen1 or Gen 2.....d/l an euu pkg from the bottom of the post-this will wipe all yr data so be warned.....that's why update.zip is first choice for many d/graders - they get to keep all their crap, lol
but personally, there are issues in Stock ICS, some have and some don't - I dont.- anything i can do to minimize conflicts, then I do it - remember too ICS is a major OS upgrade - not all app are fully optimised for ICS - and Acer are happy to release buggy builds - u can see how those 3 things alone can add up to potential conflicts
I like the idea of being clean, clean , clean and encourage others to stickto build path if ya can to minimize probs further down the line.....
The other thing is, u could just upgrade to ICS full stock Gen 1 as it seems 7.006.01 and 7.006.03 are running on this same build now
Don't ya just love android - u get 2 choose how u want things - then the fun of fixing it when u break it, lol

dibb_nz said:
.maybe 4.010.24-38 range ??? But I'm guessing ..... depends what region u are...google yr build no. Good way 2 fin out and U may find a full stock rom - then u only need to flash it and wait for the ota
U could go all the way back to 3.0.1 and your tab will update itself to the right ,build.....then
U only need to pick from gen1 or Gen 2.....d/l an euu pkg from the bottom of the post-this will wipe all yr data so be warned.....that's why update.zip is first choice for many d/graders - they get to keep all their crap, lol
but personally, there are issues in Stock ICS, some have and some don't - I dont.- anything i can do to minimize conflicts, then I do it - remember too ICS is a major OS upgrade - not all app are fully optimised for ICS - and Acer are happy to release buggy builds - u can see how those 3 things alone can add up to potential conflicts
I like the idea of being clean, clean , clean and encourage others to stickto build path if ya can to minimize probs further down the line.....
The other thing is, u could just upgrade to ICS full stock Gen 1 as it seems 7.006.01 and 7.006.03 are running on this same build now
Don't ya just love android - u get 2 choose how u want things - then the fun of fixing it when u break it, lol
Click to expand...
Click to collapse
Yeah, speaking of problems. I just flashed Acer_A500_4.010.38_COM_GEN1 through CWM (install zip from sdcard) and now my tablet stops at blinking Android logo. Any suggestions what I should flash or anything? And yes, I did a backup of my rom before flashing and I have uid. Also I don't care if my stuff goes I have backed up everything I need.

Fox05 said:
Yeah, speaking of problems. I just flashed Acer_A500_4.010.38_COM_GEN1 through CWM (install zip from sdcard) and now my tablet stops at blinking Android logo. Any suggestions what I should flash or anything? And yes, I did a backup of my rom before flashing and I have uid. Also I don't care if my stuff goes I have backed up everything I need.
Click to expand...
Click to collapse
Oooops.... from vaches site???????
---------- Post added at 12:19 AM ---------- Previous post was at 12:18 AM ----------
Do u still have cwm??

dibb_nz said:
Oooops.... from vaches site???????
---------- Post added at 12:19 AM ---------- Previous post was at 12:18 AM ----------
Do u still have cwm??
Click to expand...
Click to collapse
Yup, from vache's site. I don't think I have CWM because if I insert my external sdcard and press Vol- + Power then it says "Booting custom recovery image" and then Android comes up with gearwheels come up and it starts loading then hangs and finally it restarts and again the blinking Android comes up. When I do it without external sdcard the Android logo shows only an exclamation mark in the middle of Android logo. Any suggestions?

Which one u d/l
Did u extract update.zip and flash
Did it need decrypting first and did u do that
Can try reflash but need answers to these questions first
Don't do anything just yet
Sent from my A500 using XDA Premium HD app

dibb_nz said:
Which one u d/l
Did u extract update.zip and flash
Did it need decrypting first and did u do that
Can try reflash but need answers to these questions first
Don't do anything just yet
Sent from my A500 using XDA Premium HD app
Click to expand...
Click to collapse
I flashed this version: Acer_A500_4.010.38_COM_GEN1
I extracted update.zip and opened it in computer with no problems
I don't think it needed decrypting, but I'm not sure.
Also I did wipes before flashing (data, cache, dalvik and battery).

K m8 try reflash
VolDwn pwr
If that don't work then
Try using hard reset:
1) Turn off your tablet,
2) Rotation lock to your left;
3) Press Vol+ (which is closest to rotation lock) and power on simultaneously
4) As soon as the tablet vibrates you can release the power on button and
you should start to switch rotation lock left and right till you see
Erasing Userdata... Erasing Cache... Vol+ is still pressed;
5) The tablet starts to format
6) Your tablet will be as clean as it can be.

dibb_nz said:
K m8 try reflash
VolDwn pwr
If that don't work then
Try using hard reset:
1) Turn off your tablet,
2) Rotation lock to your left;
3) Press Vol+ (which is closest to rotation lock) and power on simultaneously
4) As soon as the tablet vibrates you can release the power on button and
you should start to switch rotation lock left and right till you see
Erasing Userdata... Erasing Cache... Vol+ is still pressed;
5) The tablet starts to format
6) Your tablet will be as clean as it can be.
Click to expand...
Click to collapse
Ok, will try when I get back. Will reply when I do it.

If hard reset don't work an u still no boot
Have to d/l gen1 EUU at end first post vaches thread
This will take u back to 3.0.1
At present u have stock recovery loaded
What rom u coming from????
It's freakn l8/early here m8, need few zzzzz's
I be back l8r.....good luck

dibb_nz said:
If hard reset don't work an u still no boot
Have to d/l gen1 EUU at end first post vaches thread
This will take u back to 3.0.1
At present u have stock recovery loaded
What rom u coming from????
It's freakn l8/early here m8, need few zzzzz's
I be back l8r.....good luck
Click to expand...
Click to collapse
Ok I come from Taboonay ICS leak ROM.

Jellybean or Ice cream sandwich on Ideos S7

Jellybean or Ice cream sandwich on Ideos S7
Here is the step by step guide for the joy (of course for the newbies).
Say thanks to goodoane, asturel, luisrene88, Jota, dzonikg , tri_zet*
and many for this.
1. Go here : http://www.androidtablets.net/forum...ical/15812-rom-tri_zet-ideos_s7-slim-mod.html and download the zip file :S7_trzmod-v3.zip
2. Then go here : http://www.androidtablets.net/forum...recovery-ideos-s7-classic-cmr-v6-0-1-2-a.html and download this recovery image: CM recovery.img
3. Now rename this recovery image to recovery-trzmod3.img and replace that with the image file of same name in S7 trzmod-V3.zip
4. Now unzip it in computer and now you are ready for flashing recovery by running update.cmd.
5. Next visit this page http://www.androidtablets.net/forum...yanogenmod-9-s7-slim-alpha-21.html#post237650 and download the boot images cm9 boot image from http://www.share-byte.net/yJkZ6X and cm10 from http://www.share-byte.net/cQhhFq
6. Then go on to http://www.androidtablets.net/forum...al/45329-rom-cyanogenmod-9-s7-slim-alpha.html and download the latest roms in zip files from the link http://www.asturel.hu/cm9_s7/
7. Now rename the cm9 boot image to just boot.img and replace that with the boot image in cm9rom. Repeat this with the cm10.
8. Also download the latest respective google apps from the links in http://wiki.cyanogenmod.com/wiki/Latest_Version/Google_Apps
9. Now copy the roms and gapps zips to your internal sd card
10. Turn on usb debugging and connect ideos to pc. Run the update.cmd in the trzmod v3 folder.
11. First install the adb huawei drivers
12. Then install the recovery ie. The altered ere ics recovery we have replaced initially
13. Reboot to recovery and exit the cmd
14. Disconnect from the pc and do factory reset, wipe cache, wipe dalvik cache in advanced
15. select install zip from sd card and then choose zip from sd card. Choose cm9 or cm10 as you wish
16. you have it.
Whatever happens to your tab is your business. Read this threads in detail about ups and downs of each rom and check on latest boot image kernels.
1. http://www.androidtablets.net/forum...al/45329-rom-cyanogenmod-9-s7-slim-alpha.html
2. http://www.androidtablets.net/forum...l/46180-rom-cyanogenmod-9-s7-105-testing.html
Remember this is a developing subject. Dont spam those threads with noob questions. Above I have explained it in the most simple noob way. There is no other easier way. This is for s7 classic ie. 10X versions. Best wishes
my blog : www.bijopaul.blogspot.com

Solved: How to copy roms and files to "INTERNAL SD CARD" ?
Problem: My device says there is no SD card in it
but i do have it

5. Next visit this page http://www.androidtablets.net/forum/...-alpha-22.html and download the boot images cm9 boot image from http://www.share-byte.net/yJkZ6X and cm10 from http://www.share-byte.net/cQhhFq
Click to expand...
Click to collapse
i cant download them cm9 and 10
just need 9 atm but when i click on download file i get this (after a min or so waiting)
Access denied for user 'root'@'localhost' (using password: NO)
any1 got it and put it on mediafire or something pls

Hello
djaydino said:
i cant download them cm9 and 10
just need 9 atm but when i click on download file i get this (after a min or so waiting)
Access denied for user 'root'@'localhost' (using password: NO)
any1 got it and put it on mediafire or something pls
Click to expand...
Click to collapse
There are so many ROMs there, which one do you want ?

urgent pls
dkharpuri said:
There are so many ROMs there, which one do you want ?
Click to expand...
Click to collapse
i tried everything but in the last updated failed please retry this is the message am getting how to overcome it now
urgent pls

antonieoalan said:
i tried everything but in the last updated failed please retry this is the message am getting how to overcome it now
urgent pls
Click to expand...
Click to collapse
if it is for slim here you go paranoid 2.54 ..its with gapps include so dont need to flash them.
http://www12.zippyshare.com/v/55512286/file.html
Sent from my YP-G70 using xda app-developers app

help out
DZonikg said:
if it is for slim here you go paranoid 2.54 ..its with gapps include so dont need to flash them.
http://www12.zippyshare.com/v/55512286/file.html
Sent from my YP-G70 using xda app-developers app
Click to expand...
Click to collapse
ok thanks
but i tried again with the same rom mentioned above now it started installing i think how much time it takes its keeping on blinking

antonieoalan said:
ok thanks
but i tried again with the same rom mentioned above now it started installing i think how much time it takes its keeping on blinking
Click to expand...
Click to collapse
you must wipe everything in cwm before install..first boot takes some 10 minutes.
Sent from my YP-G70 using xda app-developers app

DZonikg said:
you must wipe everything in cwm before install..first boot takes some 10 minutes.
Sent from my YP-G70 using xda app-developers app
Click to expand...
Click to collapse
i installed cwm but not able to get into the revocery mode once it went in but it got swtiched off and then i cant see the recvoery mode itself
very much struggling to get into the recovery mode
very interesetling waiting to see the ics in this tab
---------- Post added at 09:35 AM ---------- Previous post was at 09:33 AM ----------
antonieoalan said:
i installed cwm but not able to get into the revocery mode once it went in but it got swtiched off and then i cant see the recvoery mode itself
very much struggling to get into the recovery mode
very interesetling waiting to see the ics in this tab
Click to expand...
Click to collapse
ok nw i got into the recovery mode by luck but not ableto select the option with the help of vol buttons
---------- Post added at 09:38 AM ---------- Previous post was at 09:35 AM ----------
antonieoalan said:
i installed cwm but not able to get into the revocery mode once it went in but it got swtiched off and then i cant see the recvoery mode itself
very much struggling to get into the recovery mode
very interesetling waiting to see the ics in this tab
---------- Post added at 09:35 AM ---------- Previous post was at 09:33 AM ----------
ok nw i got into the recovery mode by luck but not ableto select the option with the help of vol buttons
Click to expand...
Click to collapse
third time now stuck at ideos screen again have to instal ffrom dload and then start off again frm first
is there any shortcut to overcome this

i successfully instaled it the rom looks good but wifi not working and the phone gets rebooting on and off
so am goin to try the paranoid 2.16 rom now see u good night

antonieoalan said:
i successfully instaled it the rom looks good but wifi not working and the phone gets rebooting on and off
so am goin to try the paranoid 2.16 rom now see u good night
Click to expand...
Click to collapse
i dont like the paranoid angel i like the cm10 version from asturel only but am getting the follwoing errors
1. gets rebboting off frequently
2. sd card not getting detected
3. Wifi not getting enbled even though i used many appliactions from gapps to enable it
4. but the look is awesome
i just need it for the day to day use of this mobile with the jellybean

Ok am back to eclair let me wait for the stable version of jelly ban for this mini device
Sent from my IDEOS S7 using xda app-developers app

hey i did everything you said, my tablet opened up BUT my touchscreen is going crazy! when i touch it doesn't work properly for example i touch in the midle of the screen it showes that i touching in the up left corner of the screen and when i use the pad a mouse (like pc) appears i can't even control my tablet... any suggestion?
IDEOS S7 105

is this working for huwae ideos s7 not the slim one.....am a new bee so please answer my question...T_T

it works on Huawei S7 Slim (S7-202u)
i just install on my Huawei S7 Slim (S7-202u) and works, now i will test if some bug appears i will tell you.
i have a doubt, how can i put the keyboard and language portuguese-Brazil in my tablet?
Another doubt, i guess that the battery are going empty very fast, how deal with that?
thanks!

how's it going?
cmallagoli said:
i just install on my Huawei S7 Slim (S7-202u) and works, now i will test if some bug appears i will tell you.
i have a doubt, how can i put the keyboard and language portuguese-Brazil in my tablet?
Another doubt, i guess that the battery are going empty very fast, how deal with that?
thanks!
Click to expand...
Click to collapse
I'm glad to see current activity here, as I have an S7 that needs this treatment. Exactly what did you install? Is it all working? Thanks.

Thanks

cmallagoli said:
i just install on my Huawei S7 Slim (S7-202u) and works, now i will test if some bug appears i will tell you.
i have a doubt, how can i put the keyboard and language portuguese-Brazil in my tablet?
Another doubt, i guess that the battery are going empty very fast, how deal with that?
thanks!
Click to expand...
Click to collapse
can you tell me the step you do ?
from the first post there is so many application that I need to download. is that true ?
thank you

Hi,
I'm going to be crazy!!
I do all waht you say but when i try to choose Zip from sdcard it say "E:Can't mount /sdcard/" that's all!!!
Impossile to access to my rom.zip!!!
Please Help
Stéph.

can't select option using volume buttons on clockworkmod recovery!
i was doing smoothly following the procedures but i get stuck always on cwm recovery because i cant enter any other option aside from reboot because the touchscreen is not working as well as the volume buttons, only the power button is working...did i did something wrong? or is it because the Ideos S7 slim 201w has no official cwm recovery yet?

Need help with 2012 N7 that is kind of bricked!

OK so I know there is A TON of info on these forums.
I searched around but I did not see anything similar to my situation.
If there is a thread, please just link it and ill delete this thread.
Basically I had rooted my N7 back earlier this year and had a custom rom as the 5.0 OTA made my N7 run like crap.
It was fine until the last few months, it got REALLY slow. I didnt update it, or mod it other then flashing the roms.
So I set out to get a new rom. I figured id try the 6.0 AOSP rom.
DL it, as well as the GAPPS and tried to install it. All I ever got was a continuous error saying, "setup wizard has stopped".
Searched some more and saw that someone fixed it by installing a bare bones GAPPS and then WIPING Dalvik and cache immediately after flashing GAPPS.
I did this and no change. Still an error.
So I noticed that when I was in Windows, my N7 showed as having 5+/- gigs free out of 13gb.
So I figured let me wipe this whole thing clean and start fresh.
BTW- this has all been done with Wugfresh toolkit.
So I went ahead and erased/ formatted and planned to return to stock and then re-root and flash a 4.44 rom as I saw that on the grouper nothing over 4.44 works great and all I want is a stockish N7 that stays fast and works 100%.
Well now all I get is the Google scree with the Unlock icon and a green start icon and when you try to go into bootloader it says booting failed in upper left corner.
Any ideas hahaha.
Thanks!

I never used Wugfresh ......Are you able to get to recovery? If so what recovery do you have?
Sent from my Nexus 6 using Tapatalk
---------- Post added at 10:34 PM ---------- Previous post was at 10:29 PM ----------
Check this out I use it on my 2012 N7.......http://forum.xda-developers.com/showthread.php?t=2533035
[ROM][4.4.4 STOCK KTU84P][BSZKitKat v1.6][SuperSU|ZipAlign|DEODEX|ODEX][20/06/14]
Sent from my Nexus 6 using Tapatalk

twics said:
I never used Wugfresh ......Are you able to get to recovery? If so what recovery do you have?
Sent from my Nexus 6 using Tapatalk
---------- Post added at 10:34 PM ---------- Previous post was at 10:29 PM ----------
Check this out I use it on my 2012 N7.......http://forum.xda-developers.com/showthread.php?t=2533035
[ROM][4.4.4 STOCK KTU84P][BSZKitKat v1.6][SuperSU|ZipAlign|DEODEX|ODEX][20/06/14]
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
I had the latest twrp recovery, I think 2.08 ?
I can't seem to get to the recovery screen.....only the bootload screen.

Well your bootloader is unlocked so you should be able to flash recovery again via ADB...when you are pressing the volume buttons to select recovery or bootloader is there an option for recovery? If so what does it say or do why you can't get to recovery.
Sent from my Nexus 6 using Tapatalk

twics said:
Well your bootloader is unlocked so you should be able to flash recovery again via ADB...when you are pressing the volume buttons to select recovery or bootloader is there an option for recovery? If so what does it say or do why you can't get to recovery.
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
Sorry I disappeared, I got busy with school and I just put the device to the side.
I am trying to get it restored but no matter what I do, wugfresh just hangs "waiting for device".
It finds it via ADB...
i tried doing a restore with my backup, tried flashing stock/recovery...
All I get it the main screen with Google and the unlock icon....If I hit the volume rocker I can jump to the bootload screen but when I try to jump to recovery it says "boot failed" in upper left corner.
Any ideas or is this thing toast?

1993cb7 said:
Sorry I disappeared, I got busy with school and I just put the device to the side.
I am trying to get it restored but no matter what I do, wugfresh just hangs "waiting for device".
It finds it via ADB...
i tried doing a restore with my backup, tried flashing stock/recovery...
All I get it the main screen with Google and the unlock icon....If I hit the volume rocker I can jump to the bootload screen but when I try to jump to recovery it says "boot failed" in upper left corner.
Any ideas or is this thing toast?
Click to expand...
Click to collapse
NO!! Your device is not toast if it powers on then it should be recoverable, my advice forget WugFresh check out this page on how to get TWRP installed> https://twrp.me/devices/asusnexus72012wifi.html for latest twrp recovery, on this page you will find info how to get ADB running properly, once you have Twrp recovery installed try this Rom it is stock Lolliopop and runs great better than previous ones http://forum.xda-developers.com/nexus-7/development/rom-t2931064
---------- Post added at 02:00 PM ---------- Previous post was at 01:54 PM ----------
Please let me know how you get on. also if you get TWRP installed wipe everything apart from internal storage before install Rom.

1993cb7 said:
Sorry I disappeared, I got busy with school and I just put the device to the side.
I am trying to get it restored but no matter what I do, wugfresh just hangs "waiting for device".
It finds it via ADB...
i tried doing a restore with my backup, tried flashing stock/recovery...
All I get it the main screen with Google and the unlock icon....If I hit the volume rocker I can jump to the bootload screen but when I try to jump to recovery it says "boot failed" in upper left corner.
Any ideas or is this thing toast?
Click to expand...
Click to collapse
Hi there and a happy new year .....well guess what iv got the same issue as well now and I'm also using WugFresh I can reboot bootloader from NRT but that's it can't get to recovery can't write to recovery can't flash recovery all I can do is to TWRP temporary via NRT ,but still can't write to it, I read somewhere that the internal SD is fried which is why I can't write to system which means can't flash Recovery or Rom which mean can't reboot system so unfortunately for us its looking like a new motherboard or new tablet.
Sent from my HTC One using Tapatalk

twics said:
Hi there and a happy new year .....well guess what iv got the same issue as well now and I'm also using WugFresh I can reboot bootloader from NRT but that's it can't get to recovery can't write to recovery can't flash recovery all I can do is to TWRP temporary via NRT ,but still can't write to it, I read somewhere that the internal SD is fried which is why I can't write to system which means can't flash Recovery or Rom which mean can't reboot system so unfortunately for us its looking like a new motherboard or new tablet.
Sent from my HTC One using Tapatalk
Click to expand...
Click to collapse
Did you ever get it sorted out?
Im trying to fix mine because someone wants to buy it so Im going to spend all night working on it. If I get anywhere ill let you know.

1993cb7 said:
Did you ever get it sorted out?
Im trying to fix mine because someone wants to buy it so Im going to spend all night working on it. If I get anywhere ill let you know.
Click to expand...
Click to collapse
OK Im back. Roughly an hour and a half. Not bad.
So what I did(if you're stuck on the bootloader screen like me)
Updated to the latest version of Wugfresh.
Made sure it updated all of the files it needed etc.
I then went through the process of uninstalling and reinstalling the drivers for ADB etc. I actually had an issue with it not detecting my device so it recommended installing the generic Google drivers....I did that.
Even after doing that, when I would check ADB connectivity it would say no devices found. I remembered that sometimes it would still communicate with the device even though it said nothing was found. I decided to do a fastboot format under advanced utilities because I knew that i erased it previously and I think that is where I ran into problems.
Sure enough adb found my device and formatted the bootloader no problem. I then continued with the restore to stock/w boot loop function and had patience...it took FOREVER to load the system image and then it took like 10 minutes to reboot but it did and I have a fully functional device right now.
I logged in and turned USB debugging on and re-locked the device. I then did a system wipe from inside the system and will sell it tomorrow.
So have faith, its not over till its over.
and p.s. I changed the USB port that I was plugged into. I have a USB hub that I usually connect too but I figured id connect directly to a USB port on the machine. Not sure if that helped, but people recommend it anyway.