Hey i got a Problem.
I tryed to install Android 4.1 second time on my device.
First time it ran perfekt but i had to remove it because gaps didn't work.
After i removed it i got a new Buildingnumber it changed from JVI to JW1 but there were no kernel to root my handy again.
So I tryed itt with my old rootkernel JVI.
But Odin stopped working and now my handy can't boot, the only thing that works is the downloadmode.
Every time i want to start it there is a telefon, a pc and a ! on middle of both.
And maybe it's important, i'm on Linux and i used a Windows virtuelle maschine to controll Kies and Odin.
I hope you can help me
What rom are you using? --> thread
Sent from my GT-I9000 using Tapatalk 2
what do you mean with what Rom are you using? i don't installed any rom i only tryed to root my handy from now.
i don't installed any Rom i only cleaned my handy last time i deleted android 4.1 with darky room and installed the original firmware from Samsung
andoid version 2.3.6
darkhunter1997 said:
Hey i got a Problem.
I tryed to install Android 4.1 second time on my device.
First time it ran perfekt but i had to remove it because gaps didn't work.
After i removed it i got a new Buildingnumber it changed from JVI to JW1 but there were no kernel to root my handy again.
So I tryed itt with my old rootkernel JVI.
But Odin stopped working and now my handy can't boot, the only thing that works is the downloadmode.
Every time i want to start it there is a telefon, a pc and a ! on middle of both.
And maybe it's important, i'm on Linux and i used a Windows virtuelle maschine to controll Kies and Odin.
I hope you can help me
Click to expand...
Click to collapse
That's called forced download mode. You need to flash a kernel with Odin. Pm me if you need the link for Odin. Search xda for a kernel. Also on a side note, for gapps you will have to flash it twice. Once will not be enough.
Sent From My YP-G1 running ICS build 3.5
Try to flash the rom with odin
Sent from my GT-I9000 using xda premium
As long as you can access download mode, everything is easy. Just flash a new ROM via Odin and you're good
Sent from my Gameboy Color
ok what Rom should i flash?
Download the official firmware from Samsung?
i thought i only can flash roms with root?
If i do it i install a new Android? i mean can i get Android 4.0 f.e too?
i downloaded the 3-file firmware from samsung now.
Everytime i patch it fails...
can smb help me?
darkhunter1997 said:
i thought i only can flash roms with root?
If i do it i install a new Android? i mean can i get Android 4.0 f.e too?
Click to expand...
Click to collapse
You can flash any ROM using odin as it will do the root for you. If you are a noob then try this link it has full detailed instructions and is a great starting point from which you can build on [flash over]
http://www.alliance-rom.com/community/threads/odin-jvu-re-gt-i9000.6558/
i tryed to install it from this http://www.android-hilfe.de/origina...jvi-odin-kies-offizielles-update-2-3-3-a.html
but everytime i press start i get an error...
darkhunter1997 said:
but everytime i press start i get an error...
Click to expand...
Click to collapse
If you get error in odin, use the solution in My Android Solutions, link below
darkhunter1997 said:
i tryed to install it from this http://www.android-hilfe.de/origina...jvi-odin-kies-offizielles-update-2-3-3-a.html
but everytime i press start i get an error...
Click to expand...
Click to collapse
What is the error
Sent From My YP-G1 running ICS build 3.5
If you are having no luck with Odin, try using Heimdall.
1..Download Heimdall from www.glassechidna.com.au/products/heimdall/, preferably version 1.3.1 as 1.3.2 isn't quite as stable.
2. Download a firmware from http://forum.xda-developers.com/showthread.php?t=1196179. The link also contains a decent guide by Aorth on how to use the Heimdall frontend to load i9000 firmwares.
3. Before following the guide, install the correct drivers to use with heimdall by putting your phone into download mode, unpacking the heimdall application zip and running 'zadig', (found inside the drivers folder). Under options, remember to tick 'List all Devices' and untick 'Ignore hubs or composite parents'. Install either 'Samsung USB composite device' or 'Gadget serial'.
Good luck.:fingers-crossed:
now it worked.
The new firmware runned succesfull but now my handy is bricked without a reason omg...
Now i have to fix it new?
Why it bricked without doing anything?...
huw much time should it need to get in recovery system from clockword Mod?
I think it bricked second time i tryed to go into recovery system
darkhunter1997 said:
huw much time should it need to get in recovery system from clockword Mod?
I think it bricked second time i tryed to go into recovery system
Click to expand...
Click to collapse
Clockworkmod is a recovery. What firmware did you flash exactly? Did you check the MD5? What did you use to flash (clockworkmod, odin etc)and what steps did you take to flash?
you can install Roms with Clockwork right? why it brick everytime i use recovery mode?
I installed the Samsung Firmware 10 times now i think.
to flash i the 2.3.3 Firmware from Samsung i used Odin.
And i want to install andorid 4.1 now
Related
So I am not to NOOB but I sure acted like it last night when I was way tired and tried to flash a ROM. Here is what I did...
I didn't catch that I didn't have the CWM but that I had booted into the stock recovery tool... Well I didn't before it was to late that is...
I clicked WIPE DATA
I clicked WIPE CACHE
Then noticed there was no "install from SD"
So it seems like whatever I find to install from ODIN I can't get the CWM to install so I can then flash a ROM!
I need my phone up for work, I am in HOT SH!T!
How can I either flash a rom via stock recovery "update format" OR install CMW via ODIN?
PLEASE HELP ASAP!!
Thank you
why don't you just flash again via odin and then root your phone via odin as well?
Don't quite understand whats your problem. So what if you wiped data and cache the rom is still there. Reboot normally and flash cfroot according to your firmware and then you should have cwm up and running. After that flash desired rom and the end.
Sent from my GT-I9100 using xda premium
Flash one of the CF-Root kernels through Odin, whichever one matches the firmware you're running. They have CWM baked in, along with root so you can flash a ROM afterwards.
If you can't get into download mode, turn your phone off, plug it in and hold down + power + home and it should boot into download mode. Then you can flash with Odin.
I thought the same thing, that so what that I wiped them... but when I rebooted the phone it just sits at the "Rethink possible screen"
I can get into download mode and I did find the "cf" post but I dunno what kernel I am running as I can't boot to go into settings to seek.
if you in recovery mod choose reboot, and it will be ok, than read: http://forum.xda-developers.com/showthread.php?t=1103399,
or put in download mod: turn your phone off, hold down + power + home. Then flash with Odin.
I know you probably don't want to, but you can try doing a factory reset, that should allow you to get your phone up and running. If you have gmail installed it should put all your contacts back, as long as you backed up to gmail.
If you have an old copy of titanium backup you won't loose ALL your apps, this is why I tend to back up every weekend, I'm only a week behind with everything if problems arise....
Cheers...
Flash stock rom... Download cwm and flash with odin.... Then instal rom u want with cwm...
Sent from my GT-I9100 using xda premium
like I said, I am not a noob, just made a mistake...
I found the cf-kernel page, but I dunno what kernel I am running and so I dunno what kernel to flash (It seems vital)
"just rebooting" don't work lol I wish... it hangs at the "rethink possible" boot screen...
I was rooted but running the stock rom, if I can get CWM installed I think I will be golden, but whatever I seem to flash from ODIN don't work :-( no matter what nothing will flash as "PDA" but when I flash using "phone" it seems to install "zimage" which is the embedded file and succeeds and phone reboots... but still only to the rethink possible point.
flash any stock firmware then flash supercore 2.0 and do whatever you want from there
Think i know what the problem is,i have same issue sometimes,try flashing anogher rooted Kernel through odin,make sure its like if the rom is a kj3 that it has a kj3 kernel.see if that works
ultramag69 said:
you can try doing a factory reset... Cheers...
Click to expand...
Click to collapse
Be glad to but it isn't an option in the recovery?
My options are as follows...
Reboot system now
Apply update from SD
Wipe/reset
Wipe/cache
been in similar, if not same situation, things were missing from cwm recovery, like you wrote...if memory serves me fine,
flash stock fw with pit, repartition and everything...
then some rootec kernel with recovery...
Oh sh!t... just flashed the pit file here... http://www.darkyrom.com/community/i...-with-odin/#download-a-pit-file-for-the-i9100
and odin said success... and screen went black.
Not responding at all now :-(
let's go in a safe way...as long as you have download mode, you're OK.
Go to samfirmware or somewhere on XDA and find FULL STOCK FIRMWARE with proper .pit file and flash it with odin. Not kernel, not anything that is not full rom.
since you state that you are not noob, you know what from there.
abovenbeyond said:
Oh sh!t... just flashed the pit file here... http://www.darkyrom.com/community/i...-with-odin/#download-a-pit-file-for-the-i9100
and odin said success... and screen went black.
Not responding at all now :-(
Click to expand...
Click to collapse
What on earth are you doing?
It clearly states:
I9000 & I897 owners (not I91000!!!) may also need a PIT file (also included in RE ROM ZIP files). I will explain further what it's for.
Why didn't you follow a tutorial on xda? Can you boot in download mode?
borstri said:
let's go in a safe way...as long as you have download mode, you're OK.
Go to samfirmware or somewhere on XDA and fin FULL STOCK FIRMWARE with proper .pit file and flash it with odin. Not kernel, not anything that is not full rom.
since you state that you are not noob, you know what from there.
Click to expand...
Click to collapse
Sounds amazing but after my post above I not can't get the phone to power on although I hear the laptop detect it as I attempt to power down or up, but no screen or led display...
Really worried now... ****!
Lennyz1988 said:
What on earth are you doing?
It clearly states:
I9000 & I897 owners (not I91000!!!) may also need a PIT file (also included in RE ROM ZIP files). I will explain further what it's for.
Why didn't you follow a tutorial on xda? Can you boot in download mode?
Click to expand...
Click to collapse
I flashed this...
Download a PIT file for the I9100
Download EXT4.pit file (2KB)
(for the S2 only)
battery pullout, then three button combo for download
Hello everybody
My friend has a Samsung Galaxy Y GT-S5360 and since yesterday it won't start. It shows "Samsung Galaxy Y young" and doesn't start. So I decided to try to root it and install Jellyblast v3 but it's the same problem. I followed a tutorial and tried to wipe cache and data but still the same problem. So now I read that the people who had the same problem as me, resolved their problem by flashing the stock rom with odin. But I saw that we needed some information like PDA, PHONE and CSC but I can't have these informations as the phone won't start So I am going to follow a tutorial to flash it with odin. But I'm worried about bricking definitely her phone :s So I want to know if there is no risk to brick her phone if I try to flash a stock rom without knowing these information (PDA PHONE CSC).
Thanks for your help and sorry for my bad english °° !!
please look in my signature for easy flashguide,there is all info you need.its very newby friendly and believe me thats no problem,you just stuck on boot,its not so bad and easy to solve,you only need a uauable brain an eyes.i know u can do it.good luck
-CALIBAN666- said:
please look in my signature for easy flashguide,there is all info you need.its very newby friendly and believe me thats no problem,you just stuck on boot,its not so bad and easy to solve,you only need a uauable brain an eyes.i know u can do it.good luck
Click to expand...
Click to collapse
Thanks for your answer
I downloaded a package and indeed there are 3 files into the zip. But these file are PDA / CSC / MODEM and in your guide you mention a PHONE file, is that the MODEM file ?
EDIT: Sorry I found my answer ^^"
Maws59 said:
Thanks for your answer
I downloaded a package and indeed there are 3 files into the zip. But these file are PDA / CSC / MODEM and in your guide you mention a PHONE file, is that the MODEM file ?
EDIT: Sorry I found my answer ^^"
Click to expand...
Click to collapse
Don't say thanks buddy,,,,there is a thanks button already ,just press it to appriciate OP for the usefull post..:thumbup:
:thumbup: DON'T FORGET TO PRESS THANKS BUTTON IF I HAVE A BIT SUCCESS TO HELP YOU :thumbup:
Hello
We managed to install a package but there are no french language in the one we installed. But we have these information now:
PDA: S5360DXKJ3
PHONE: S5360DXKJ1
CSC : S5360OLBKJ2
Could you tell me which package we must install to have the french language please ?
Thanks a lot for your help !!
EDIT : If you saw my last edit I did a mistake when telling informations x)
EDIT : Problem solved : http://forum.xda-developers.com/picture.php?albumid=8046&pictureid=28987
problem persists
TECHNO_THUNDER said:
Don't say thanks buddy,,,,there is a thanks button already ,just press it to appriciate OP for the usefull post..:thumbup:
:thumbup: DON'T FORGET TO PRESS THANKS BUTTON IF I HAVE A BIT SUCCESS TO HELP YOU :thumbup:
Click to expand...
Click to collapse
odin doesnt show a yellow bar while i connect my device in download mode. what to do??
odin id not detecting my device
aditya22u said:
odin doesnt show a yellow bar while i connect my device in download mode. what to do??
odin id not detecting my device
Click to expand...
Click to collapse
try install sgy drivers http://forum.xda-developers.com/showthread.php?t=2327476 .
aditya22u said:
odin doesnt show a yellow bar while i connect my device in download mode. what to do??
odin id not detecting my device
Click to expand...
Click to collapse
You should install SGY driver first
gts5360
my phone is not starting after install cwm just showing samsung logo
help me i tryed to connect odin but not connect
heart428 said:
my phone is not starting after install cwm just showing samsung logo
help me i tryed to connect odin but not connect
Click to expand...
Click to collapse
you installed cwm how?
there is only to types of cwm for galaxy y
1 - tempory cwm zip - flashed in stock recovery to give you cwm - this zip must be flashed each time you enter recovery to bring up cwm
2 - perminant cwm - this is included in a custom kernel and replaces stock kernel and stock recovery with a custom kernel and recovery
if you flashed a kernel state which one it was
to use odin
download odin 3.07
download and install samsung usb drivers
put phone in download mode by pressing vol down home button power button until download screen appears
connect phone to pc via usb cable
press vol up to begin connection
wait for drivers to install
open odin
on the left hand side it should say under com:id com then a number in a coloured box if connected
then put
pda in pda
modem in phone
csc in csc
then start
Samsung Galaxy wont Start and cant acces the System recovery
Hi ! my Samsung Galaxy y young GT-s5360 wont start after my friend tried to Upgrade it,
After i've tried to open my phone, its Stuck on the Logo "Samsung Galaxy Y young GT-S5360"
i've tried to wait of almost 10 minutes but my phone still Freeze,I've also tried to Access the Samsung Sytem recovery but it wont appear on my Screen
pls. Help me
pls. Help me
Click to expand...
Click to collapse
u phone got brick. please read previous post. u problem can be solved by use Odin.
You can flash stock rom without odin..but you need CWM
shyamSGY said:
You can flash stock rom without odin..but you need CWM
Click to expand...
Click to collapse
no you cant flash stock "firmware" without odin
if you flash a so called stock firmware via cwm all you are doing is flashing a custom rom with no modifications - slight technically difference
marcussmith2626 said:
no you cant flash stock "firmware" without odin
if you flash a so called stock firmware via cwm all you are doing is flashing a custom rom with no modifications - slight technically difference
Click to expand...
Click to collapse
By keeping a Nandroid backup in sdcard and restoring with Cwm..
I have ddle1 backup
shyamSGY said:
By keeping a Nandroid backup in sdcard and restoring with Cwm..
I have ddle1 backup
Click to expand...
Click to collapse
wouldnt work though if you changed your file system to ext to use cm7/9/cyanmobile/pa
you can only restore a nandroid backup fully if you restore it on the kernel on which it was made and you are on the same file system as it was made although you can advanced restore if on different kernel and should work if it can verify md5 sum
hemmm
marcussmith2626 said:
you installed cwm how?
there is only to types of cwm for galaxy y
1 - tempory cwm zip - flashed in stock recovery to give you cwm - this zip must be flashed each time you enter recovery to bring up cwm
2 - perminant cwm - this is included in a custom kernel and replaces stock kernel and stock recovery with a custom kernel and recovery
if you flashed a kernel state which one it was
to use odin
download odin 3.07
download and install samsung usb drivers
put phone in download mode by pressing vol down home button power button until download screen appears
connect phone to pc via usb cable
press vol up to begin connection
wait for drivers to install
open odin
on the left hand side it should say under com:id com then a number in a coloured box if connected
then put
pda in pda
modem in phone
csc in csc
then start
Click to expand...
Click to collapse
what i should put at those pda,phone and csc ? sorry, i'm newbie
IsyrafSan said:
what i should put at those pda,phone and csc ? sorry, i'm newbie
Click to expand...
Click to collapse
Don't understand the question sorry
Like I said - download the firmware from my firmware thread & follow all the instructions
Pda goes in pda
Modem goes in phone
CSC goes in csc
Please follow all instructions on my firmware thread - links in signature
I have a shv-e330l (Samsung S4 from Korea AKA GT I9506) I really want to install Clockwork Mod Recovery but it looks as though the file for Odin is not available from anywhere. The one I did find was for an S2 and miss labeled as shv-e330l. I had to re partition the pit file on the device I thought it was bricked but I was able to save it. Im just looking for a good file for Clockwork recovery.
Hello and welcome to XDA
Already tried to look here?
I suggest to flash TWRP since CWM-based recovery is no longer supported. Download this file and Odin, then follow the instructions under "FIRST INSTALL FROM ODIN (v3.07 or higher):" in this thread. Remember to install USB drivers if you don't have Kies installed before doing anything above
AntaresOne said:
Hello and welcome to XDA
Already tried to look here?
I suggest to flash TWRP since CWM-based recovery is no longer supported. Download this file and Odin, then follow the instructions under "FIRST INSTALL FROM ODIN (v3.07 or higher):" in this thread. Remember to install USB drivers if you don't have Kies installed before doing anything above
Click to expand...
Click to collapse
Thanks It worked! Now I just need to get the Xposed module installed for Lollipop.
CorbinVw said:
Thanks It worked! Now I just need to get the Xposed module installed for Lollipop.
Click to expand...
Click to collapse
Here about Xposed for Lollipop 5.0, here for 5.1
Sweet!! Thanks man!
hi! sir @AntaresOne is it Ks01lte and Ks01ltegt are the same? i need custom recovery or twrp to flash the jumbo rom on my shv e330L.
i tried to use rom jumbo v1.0 but there is a bug it keeps rebooting (i.e 10 mins 30 mins etc) how can i fix this issue?
please give me some advise?
thank you in advance.
First, Im new here so hello!
Now, my problem is that I got this phone form my sister because it woulnt boot anymore.
Its a Galaxy s4 I9505 Int/swe with stock recovery. Ive wiped userdata and Cache. Ive tried to flash diffrent stock rom via recovery sideload without success(E: wrong footer or something like that). Ive also tried to flash TWRP but also without success. Im using Linux. Since it wont boot at all I cant enable USB debug, when in bootloader my pc isnt detecting it. Its only detected when in stock recovery sideload
I want to install TWRP and a stock or dedoxed rom but I have no idea what to do now
WantedFreak1 said:
First, Im new here so hello!
Now, my problem is that I got this phone form my sister because it woulnt boot anymore.
Its a Galaxy s4 I9505 Int/swe with stock recovery. Ive wiped userdata and Cache. Ive tried to flash diffrent stock rom via recovery sideload without success(E: wrong footer or something like that). Ive also tried to flash TWRP but also without success. Im using Linux. Since it wont boot at all I cant enable USB debug, when in bootloader my pc isnt detecting it. Its only detected when in stock recovery sideload
I want to install TWRP and a stock or dedoxed rom but I have no idea what to do now
Click to expand...
Click to collapse
first of all install odin on pc then get stock firmware for device,google them,then download samsung usb driver and install it then see if pc detects it if all goes well and is detected then use odin to flash stock firmware hope that helps
ireaper4592 said:
first of all install odin on pc then get stock firmware for device,google them,then download samsung usb driver and install it then see if pc detects it if all goes well and is detected then use odin to flash stock firmware hope that helps
Click to expand...
Click to collapse
As I said, Im using Linux which is not supported by Odin
WantedFreak1 said:
As I said, Im using Linux which is not supported by Odin
Click to expand...
Click to collapse
most people use windows here so im not sure u will get that much help here regarding problem then
ireaper4592 said:
most people use windows here so im not sure u will get that much help here regarding problem then
Click to expand...
Click to collapse
Yeah I know how to use Odin but I dont know how without Odin, thats why I asked here :/
Try using hiemdall to flash a stock rom.
http://glassechidna.com.au/heimdall/
Hello,
I have a SM-A700FD. Some time ago I installed a ROM from xda (https://forum.xda-developers.com/samsung-a-series/development/rom-t3462703) The ROM ported from c7.
Now I am trying to go back to the stock ROM, but I just can not flash any rom.
Some reasons:
1. The PC doesn't recognize the phone (neither download mode, neither recovery, neither with a ROM). I tried in 4 different PCs;
2. I've got the recovery TWRP. I can flash the ROM, but the phone is stock in the boot screen.
3. Without the connection between the phone and the PC I just cant use the ODIN. Then I cannot flash again the stock ROM.
4. I had success flashing the CM 12.1 (UNNOFICIAL, but the ROM is old and full of bugs). Neither the resurrection rom, neither stock works on my phone.
5. The phone goes to download mode and recovery mode. My custom recovery is a TWRP 3.0.2-0.
Then I tried many ROMS (AOSP and stock, flashing by recovery) and all of them stops on boot logo.
Anyone got any suggestion?
Thanks.
Regards.
GF
gabrielfabris said:
Hello,
I have a SM-A700FD. Some time ago I installed a ROM from xda (https://forum.xda-developers.com/samsung-a-series/development/rom-t3462703) The ROM ported from c7.
Now I am trying to go back to the stock ROM, but I just can not flash any rom.
Some reasons:
1. The PC doesn't recognize the phone (neither download mode, neither recovery, neither with a ROM). I tried in 4 different PCs;
2. I've got the recovery TWRP. I can flash the ROM, but the phone is stock in the boot screen.
3. Without the connection between the phone and the PC I just cant use the ODIN. Then I cannot flash again the stock ROM.
4. I had success flashing the CM 12.1 (UNNOFICIAL, but the ROM is old and full of bugs). Neither the resurrection rom, neither stock works on my phone.
5. The phone goes to download mode and recovery mode. My custom recovery is a TWRP 3.0.2-0.
Then I tried many ROMS (AOSP and stock, flashing by recovery) and all of them stops on boot logo.
Anyone got any suggestion?
Thanks.
Regards.
GF
Click to expand...
Click to collapse
Please answer the following questions so i can help you:
1- What is your Windows version? x86 or x64?
2- Do you have your original ROM in hand? (https://www.sammobile.com/firmwares/database/SM-A700FD/)
3- Did you Install the latest version of Samsung Smart Switch application on your PC? (http://www.samsung.com/us/support/smart-switch-support/#!/)
4- Which version of ODIN do you have? (http://dl.sammobile.com/Odin3-v3.11.1.zip)
Please answer the mentioned questions and then we can go forward from that point.
Hi.
1. Its x64.
2. Yes. The Last version.
3. Yes. Got the last version.
4. Got the last version of odin. 3.11 also.
Thanks!
Regards
gabrielfabris said:
Hello,
I have a SM-A700FD. Some time ago I installed a ROM from xda (https://forum.xda-developers.com/samsung-a-series/development/rom-t3462703) The ROM ported from c7.
Now I am trying to go back to the stock ROM, but I just can not flash any rom.
Some reasons:
1. The PC doesn't recognize the phone (neither download mode, neither recovery, neither with a ROM). I tried in 4 different PCs;
2. I've got the recovery TWRP. I can flash the ROM, but the phone is stock in the boot screen.
3. Without the connection between the phone and the PC I just cant use the ODIN. Then I cannot flash again the stock ROM.
4. I had success flashing the CM 12.1 (UNNOFICIAL, but the ROM is old and full of bugs). Neither the resurrection rom, neither stock works on my phone.
5. The phone goes to download mode and recovery mode. My custom recovery is a TWRP 3.0.2-0.
Then I tried many ROMS (AOSP and stock, flashing by recovery) and all of them stops on boot logo.
Anyone got any suggestion?
Thanks.
Regards.
GF
Click to expand...
Click to collapse
You need to wipe your data partition. AOSP/CM based roms and stock roms do not have compatible DATA partitions.
The rom I installed wasnt aosp. Made the wipe already... Nothing changes.
gabrielfabris said:
The rom I installed wasnt aosp. Made the wipe already... Nothing changes.
Click to expand...
Click to collapse
If you don't have a hardware problem then the procedure below should restore the device to a bootable state.
Wipe data
Install stock with odin
Wait at least 10 mins for boot to complete.
Well. Tried but, as I said, my pc (tried in até least 4 different PCs) doesnt recognize my cellphone.
Thats not hardware. It appeared just when I tried tô change the rom.
Srry.
gabrielfabris said:
Hi.
1. Its x64.
2. Yes. The Last version.
3. Yes. Got the last version.
4. Got the last version of odin. 3.11 also.
Thanks!
Regards
Click to expand...
Click to collapse
1- Load the following Samsung USB drivers for Windows:
http://samsungusbdriver.com/download/samsung-driver-v1-5-61-0
2- Install the drivers while you mobile is disconnected.
3- Put your mobile into download mode. (Vol Down + Power)
4- Run Odin and then connect your mobile after (It has to be recognized by assigning you a port number COMx in Odin under ID:COM).
5- Make sure that only F.Reset Time and Auto Reboot are checked under the ODIN Options tab (IMPORTANT: NOTHING ELSE IS CHECKED)
6- Select you Stock ROM in the AP tab of Odin and as soon as it is loaded hit Start.
7- The phone will restart and wait for few minutes till the Stock ROM builds its caches, optimizes its apps and start.
Hope this helps you restore your stock ROM and tell me how it went
Regards
tghandour said:
1- Load the following Samsung USB drivers for Windows:
http://samsungusbdriver.com/download/samsung-driver-v1-5-61-0
2- Install the drivers while you mobile is disconnected.
3- Put your mobile into download mode. (Vol Down + Power)
4- Run Odin and then connect your mobile after (It has to be recognized by assigning you a port number COMx in Odin under ID:COM).
5- Make sure that only F.Reset Time and Auto Reboot are checked under the ODIN Options tab (IMPORTANT: NOTHING ELSE IS CHECKED)
6- Select you Stock ROM in the AP tab of Odin and as soon as it is loaded hit Start.
7- The phone will restart and wait for few minutes till the Stock ROM builds its caches, optimizes its apps and start.
Hope this helps you restore your stock ROM and tell me how it went
Regards
Click to expand...
Click to collapse
Hi.
I made the procedure you said. First of all, Thanks.
The odin doesn't recognize the Phone.
The rom I installed in the first moment was Port from c7. I got that messages "warranty bit kernel" "Keynes is not seandroid".
Maybe something went wrong in that place.
gabrielfabris said:
Hi.
I made the procedure you said. First of all, Thanks.
The odin doesn't recognize the Phone.
The rom I installed in the first moment was Port from c7. I got that messages "warranty bit kernel" "Keynes is not seandroid".
Maybe something went wrong in that place.
Click to expand...
Click to collapse
Ok then it seems you have a bootloader problem. I suggest you unzip your A700FD stock ROM tar.md5 file by deleting the md5 extension (Rename SM-A700FD-ROM.tar.md5 to SM-FD700-ROM.tar), then unzip the ROM.tar file using WinRAR or 7Zip. Now you will have all the ROM partitions files including boot.img and system.img files as well as others. I suggest you place both files on your external SD Card via the PC (using a card reader) and then flash both from within TWRP (You can change in TWRP to flash img files instead of zip files) while formatting the data and cache partitions and reboot.
I believe that way you can restore the boot.img and system.img partitions, correct any corruption in the boot and system partitions and can flash the whole ROM again using ODIN or flash any other custom ROM (non ported) as soon as your mobile gets recognized by your PC.
Let me know how it went.. Good luck
Thanks a lot. I did not think in that way. I'll try and then ill post here if that worked. Thanks a lot.
Regards
Gabriel Fabris