Is it possible to use Defy+ on Telus Mobility in Canada - Defy Q&A, Help & Troubleshooting

Hi,
I just picked up a Defy+ from a wholesaler online. It was supposedly unlocked already but it won't work when I placed my SIM card in it. My card is for Telus Mobility in Canada. Just curious if anyone has had success using the Defy+ on Telus's network. When purchasing the phone I was under the impression that it was just a Defy with bumped OS version and higher CPU clock speed, but essentially the same hardware. Telus previously offered the original Defy so I'm assuming that the Defy+ will work also. Any help/advice/info would be greatly appreciated.
I've also got a similar post on this thread but decided to create my own as well.
http://forum.xda-developers.com/showthread.php?p=31874982#post31874982
Vic

Just an incompatible baseband selected. What is the rom version you have on it?

Phone is still stock as it came
Just added a screen shot of the about phone. Haven't flashed any ROMs yet, or even rooted it. I'm waiting to make sure I can use the phone with Telus before I start doing all that to it. In case I need to return it.
I was considering flashing the baseband from this thread to see if it had an effect. Do you have a suggested baseband I should flash, or a suggested thread to follow? I'm no stranger to xda and modding phones, though I'm far from an expert and the Defy+ is completely new to me so I'm still just doing a lot of reading on it before I do anything.
Thanks,
Vic

Still not luck with Telus network
So after trying various Defy root methods I discovered that the old exploits don't work on my phone which has BL7. Found a good thread that handled rooting my device and successfully rooted. Following which I installed a current 2ndinit from this thread and then flashed the latest CM10 nightly. After playing with the baseband switcher and trying everyone I still haven't gotten it to register with Telus. The best I've achieved is finding the network and it failing to register.
Anyone with suggestions on what I should try next?

Still trying to get this device to work with my telus SIM card. Looking for any help to trouble shoot. Would like to start using this device as a second phone. Any suggestions would be appreciated.
Vic
Sent from my HTC Ruby using xda app-developers app

wileyvic said:
Still trying to get this device to work with my telus SIM card. Looking for any help to trouble shoot. Would like to start using this device as a second phone. Any suggestions would be appreciated.
Vic
Sent from my HTC Ruby using xda app-developers app
Click to expand...
Click to collapse
Have you manually entered or checked to see if the APN are correct after booting?
---------- Post added at 10:58 PM ---------- Previous post was at 10:43 PM ----------
wileyvic said:
Still trying to get this device to work with my telus SIM card. Looking for any help to trouble shoot. Would like to start using this device as a second phone. Any suggestions would be appreciated.
Vic
Sent from my HTC Ruby using xda app-developers app
Click to expand...
Click to collapse
OKay I see it says you that it was supposed to be unlocked but i'm thinking maybe you should get another unlock code and try it. That would be the only other reason i could see it not working other than APN not correct or wrong baseband. Try China ME722.1.10.

Thanks for the suggestion. I'll give unlocking it another shot tonight. I tried a half dozen baseband settings in cm10 that match the telus bands but no dice. Keep getting an ME error when it did see the telus network. I'll post my efforts tonight.
Sent from my HTC Ruby using xda app-developers app

I've come to the conclusion that getting the Defy+ I purchased to work on Telus isn't possible. At least by me. I confirmed that the device was indeed unlocked by trying it with SIMs from both Rogers and Fido, which both worked. I also tried a Bell card and had the same results I had with my Telus SIM, which was being able to see the network but not connect or use talk or text. This was regardless of the baseband I used.
In the end I just returned the phone back to complete stock and gave the device to a friend on Rogers who needed a new phone badly but couldn't afford an upgrade at this time.
Sent from my HTC Ruby using xda app-developers app

Too late now, but for reference you could have tried flashing a new radio. Worked for me, and also the baseband that works may not necessarily be geographically related to your location. In India the Vodafone France baseband works fine
Sent from my MB526 using xda premium

I tried to flash the Telus.zip baseband I found in a thread and it returned an error on each attempt. Flashing any other baseband that matched the frequencies for my network still resulted in a failed network connection. Same results occurred with the Bell SIM I tested with, which is a very similar network to Telus. After checking Telus' compatibility list it clearly stated the Defy+ was not compatible. I still find that strange since as far as I understand it is simply a Red-lens Defy with a larger battery and a more current ROM. I thought for sure if I added the correct frequencies I'd be set. I was mistaken as my repeated attempts have shown.

Interesting. But did you flash an older or newer Radio(not baseband)?
If defy is compatible defy plus has got to be, unless they use some twisted form of imei locking
Sent from my MB526 using xda premium

I tried the baseband from this thread: http://forum.xda-developers.com/showthread.php?t=1117553
I also tried using the cm10 baseband switcher.
Didn't realize I could flash a radio as well. When I did see and connect to Telus I'd immediately get an ME error and then loose connection to the network. Where would I find radio files?

Isn't it redundant now, since you don't have the phone? Anyways there's a thread called radio fixes or something
Sent from my MB526 using xda premium

Not having the device anymore doesn't negate my desire to solve my problem. I might get that phone back or I my decide to pick up another unlocked device that gives me similar problems. I no longer want to sign contacts for discounted devices so I'm always on the look out for good deals on unlocked hardware I can play with. Thanks for the replies.
Sent from my HTC Ruby using xda app-developers app

Well since I'm on Telus as well with the red lense defy and I checked gsm arena and a few unlock sites. They all said and indicate that phone can be used on the Telus network. Seeing as its not a phone that Telus originally sold that is why I asked about the apn. Anytime I've ever used an unlocked phone on Telus I've ways had to input the apn.
Other than that sometimes when I flash I don't always get a radio signal for some strange reason. Even changing baseband doesn't solve the problem I usually have to flash another rom and then come back to the one I want or try a different kernel. Either way I'm like you except I never would have gave it away till I solved the problem lol
Sent from my MB526 using xda app-developers app

It was more than just a case of setting the apn. I have no problem doing that. In fact that's exactly what I did with the Rogers SIM so that I could test it's data before I let my friend have it. I tried numerous ROMs with it, none of them would allow me to connect to Telus even after choosing an appropriate baseband. Unfortunately because it wasn't a Telus phone to begin with I didn't have a working Telus radio on it. I tried flashing the Telus baseband, it would return an error. I tried flashing the entire Telus ROM, it went into a boot loop as expected. I got it back to it's stock Retail ROM, after rooting that tried a baseband switcher and still wasn't able to see connect to Telus. Though it would see the network. Best luck I had was with CM10 with the Argentina baseband which would connect to Telus until I either tried to call or text. At which point I would get an ME error message and it wouldn't connect again without a reboot. At that point I suspected that maybe this device was being blocked by some sort of IMEI filtering much as thekguy suggested above and gave up on it for now. When my friend does upgrade and returns the phone I might try again for kicks. It was a neat little phone. I'm even tempted to look for a used one that is from Telus...

Please shed some light in the errors you get while flashing the telus baseband
And if you get a boot loop after sbf flash, then wipe data and cache from stock recovery
Sent from my MB526 using xda premium

I'll clarify my description of boot loop in the instance of after flashing the Telus froyo stock ROM was actually more of a soft brick. The phone became unresponsive almost immediately after turning on, blank screen, no response to button presses, essentially a brick. The only sign of life was if I pulled the battery while connected to usb the LED light would flash white for a brief second. That gave me the idea to start up an sbf flash until it got to the waiting for device message, at which point I'd plug in usb and install battery and the flash would force it into boot loader before it could go "dead"again. As far as a ROM getting stuck at the boot image, yes I know a quick wipe fixes the boot issue. At least it had for me every time I got into an endless boot process. Had to do it after recovering from the failed Telus ROM flash with the stock Retail ROM.
Thanks for the tip though. I know you are being helpful.
As far as the exact wording of the error message, I'll have to look it up when I'm back at the PC I use for modding an such... Most I can remember is it start with "ME blah blah blah" but I have a note saved with the exact line.
Cheers, Vic
Sent from my HTC Ruby using xda app-developers app

If the telus baseband failed to install via cwm due to cwm incompatibility, you can manually try to copy over the baseband files included in the zip according to the directory structure of the zip
Well, this was my last idea:If this doesn't work
Sent from my MB526 using xda premium

Ya, that was the one thing I wish I had tried before giving up on the phone. I'd considered it but wasn't sure if it'd work. When I passed it on it wasn't rooted anymore and I'd invested so much time with getting it back to stock that I had just had enough of it at the moment. Almost regret it. If I get it back any time soon that'll be where I start again.
Sent from my HTC Ruby using xda app-developers app

Related

i9000 with ICS problems.

Guys,
I've been using an SGS, followed by an SGS 2 and have always used custom ROMs without any issues in the past. I have recently traded the SGS 2 with a friend for my old blu-ray player and an old SGS. Long story, won't go into why.
No matter which build of ICS I am using, I am getting serious problems with this phone. SlimICS does not find a signal at all, it just says no service. On the one I am running at the moment (4.0.4 GTi9000_IMM30B_BETA_8_RC) and also with the nightly CyanogenMod builds, if I take or make a phone call, everything is fine. When I next go to make a call, the earpiece does not become active. The data and normal network connection is still active, but this renders the phone almost useless - having to reboot the phone every time I wish to make a phone call takes as long as sending an email for me!
Also, I should be able to choose Tmobile Orange as my network service as I am with T-mobile, who is partnered with Orange to give better signal. On the ROM I currently use, "Tmobile Orange" is not a selectable network.
Is this a problem I can resolve by flashing with a different modem?
If I can't fix this I will probably just run over the phone and buy a Nokia Lumia (change does wonder for a headache!)
Any help is appreciated.
Did you flash a modem after flashing slim? If not they are here
http://forum.xda-developers.com/showthread.php?t=1158783
[CM7/MIUI/ICS/CM9][06.01.12] Modems + Bootloaders(MD5)
Sent from my GT-I9300 using xda premium
slaphead20 said:
Did you flash a modem after flashing slim? If not they are here
http://forum.xda-developers.com/showthread.php?t=1158783
[CM7/MIUI/ICS/CM9][06.01.12] Modems + Bootloaders(MD5)
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Yes I've actually used the JVU one from it and I also tried using Odin to flash it manually using the modem I am able to get Tmobile Orange with at the moment on Gingerbread - neither work.
Is there a specific modem I need to use in the UK to get this reception?
Go to samfirmware and see which it is under your section. Ex my download is called something like ""XX-KG3. Which means my modem is KG3.
Sent from my GT-I9000 using xda app-developers app
AlwaysDroid said:
Go to samfirmware and see which it is under your section. Ex my download is called something like ""XX-KG3. Which means my modem is KG3.
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
I am getting nothing from the Checker page when I type in the details I have.
Like I said, I know it is JVU firmware I have because I've manually flashed it and it works perfectly, but when I install SlimICS it simply does NOT pick up a signal at all, even if I flash it with a radio seperately afterwards.
No signal
I installed Slim JB yesterday and no signal at all.
I tried JPG and JPU modems from this thread http://forum.xda-developers.com/showthread.php?t=1158783 but no avail.
Still no signal. I am going to try with other sims and even other roms to asses my problem.
cragger10 said:
I am getting nothing from the Checker page when I type in the details I have.
Like I said, I know it is JVU firmware I have because I've manually flashed it and it works perfectly, but when I install SlimICS it simply does NOT pick up a signal at all, even if I flash it with a radio seperately afterwards.
Click to expand...
Click to collapse
---------- Post added at 02:42 PM ---------- Previous post was at 02:16 PM ----------
Just to let you know: installed JVU, turn airplane mode on and them off and singla is back.
Not sure, yet, about 3G and the other stuff. Still testing...
roberutobr said:
I installed Slim JB yesterday and no signal at all.
I tried JPG and JPU modems from this thread http://forum.xda-developers.com/showthread.php?t=1158783 but no avail.
Still no signal. I am going to try with other sims and even other roms to asses my problem.
Click to expand...
Click to collapse

Tablet doesn't look so good...

I have an SGH-T849. Trying to unlock it. Cant find any positive guides for custom roms or anything. Everything is only on the p1000 so I took my my chances and flashed p1000 firmware so I can fit in. But now I really need your help cuz network signal is a must and I lost it after the flash. I have my imei and everything is fine but the tmobile network wont register I am trying figure out how to fix this. I have tried copy and paste modem.bin to system/vendor and flashed the tmobile modem but no go.. Also I am in bad shape because I cant find stock firmware anywhere. All links are dead and samfirmware doesnt even have it listed. Any help would from anyone would be great considering this isnt my tablet
Not every Rom has modem.bin at /system/vendor
In fact most at /radio except for cm10 that was built about two weeks ago to last week.
Now all back to /radio.
And I am talking about ICS and JB Rom.
And correct apn is a must.
And JJB modem for T-Mobile
Sent from my GT-I9300 using xda app-developers app
priyana said:
Not every Rom has modem.bin at /system/vendor
In fact most at /radio except for cm10 that was built about two weeks ago to last week.
Now all back to /radio.
And I am talking about ICS and JB Rom.
And correct apn is a must.
And JJB modem for T-Mobile
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
I have the correct APN. Also the modem.bin is in /radio as well and I also pasted it i system/vendor. No go. Question though whats the JJB radio and do u happen to know where i can find it?
Overcome gb stock safe has T-Mobile modem. Modem thread in development subforum sticky also has it.
But let me ask you this.
What do you see as baseband in the phone info.
Because even JPZ can connect to T-Mobile just no 3g. Edge only.
If has baseband and can't connect, can't help you.
But there is a person that has stock T-Mobile froyo and can share it.
You just have to search.
Sent from my GT-I9300 using xda app-developers app
priyana said:
Overcome gb stock safe has T-Mobile modem. Modem thread in development subforum sticky also has it.
But let me ask you this.
What do you see as baseband in the phone info.
Because even JPZ can connect to T-Mobile just no 3g. Edge only.
If has baseband and can't connect, can't help you.
But there is a person that has stock T-Mobile froyo and can share it.
You just have to search.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Well Itried flashing the the tmobile radio but it wont stick. Everything on the tab seems fine it just wont register the network. my baseband is JPZ.
Edit: I flashed Overcome stock GB and the tmobile radio... It went good my baseband is T-Mobile. However it still wont register the network. I am staring to think that the sim card is not activated.
Edit: Thanks much for your help. I am happy to say that my friends sim got deactivated. Up till 4 am thinking I screwed something up.
It sucks isn't it when another thing cause you to troubleshoot other things.
But, if you are on T-Mobile network and only going to use data and not voice call, your JPZ modem is going to only give you EDGE (2G) speed.
To get 3G you still need to use the T-Mobile modem I mentioned.
Sent from my GT-I9300 using xda app-developers app

[Q] Defy cannot detect SIM and memory card.

Hi dudes. Bought lately Defy with strang issue. When I put into the slots SD and SIM cards the phone cannot detect it. Only emergency calls allowed.
Mentioned cards are 100% works as I took them from another, fully working Defy. This is red lense,
System: Blur_Version.0.0.1.MB525-nightly.T-Mobile.en.US.
Firmware: 2.1-update1.
Baseband: 3gsmepu93a_u.93.00.2bi
Kernel: 2.6.29 [email protected]+1
BPflex: GM1CP1250JORDAN250AA031
Just wonder if someone faced such an issue before and what would be a solution. Simply before I go for service I`m trying find out if this is a hardware or software problem. Another problem is existing software. Despite Eclair firmware I cannot upgrade it to Froyo or Ginger.
Each attempt(ex:JRDNEM_U3_2.21.1_SIGNED_USAJORDANTMGB_P030_A012_M001_HWp3_Service1FF.sbf, JRDNEM_U3_3.4.2_177-005_NORDIC_SIGN_SIGNED.sbf, JRDNEM_U3_3.4.2_179-002_DEBLUR_SIGN_SIGNED.sbf, ) ends with Pass on RSD lite, but black screen and only option is return to Eclair.
I`ll be gratefull for any usefull suggestions.
Wipe data from stock recovery.
Sent from my MB526 using xda premium
Thx for reply.
Obviously data and cache wiped prior each flash attempt so this is not a solution in this case.
Have you tried a sbf with higher group code?
Sent from my MB526 using xda premium
Thanks for reply again
Yes I can. Gingerbread SBF`s works. I just flash shadow_2.3.4-134_DFP-10. Phone is boot up but sadly SIM and memory card are still unrecognised. and I can`t do nothing except emergency phone call
It may suggest that the phone has a hardware issue. Can anyone recommend a good (I mean good quality and not too expensive) service in the UK (London)
This might be obvious but you have used baseband switcher? Though on the whole I think you are right in saying that its an hardware issue. No clue on UK providers
Sent from my MB526 using xda premium
Hi, I wish to check - change baseband, but only SBF which allow me to get to settings not contains such feature like baseband switcher and I cant install any aplications as it required memory card, which is not recognised by phone
So I`m in deep sh...t. Visit to service seems to be only option, but thanks for your reply and advice.
Ps. I found what baseband is switched on my phone. This is 3gsmepu93a_u_93.00.2bi
Can anyone confirm that`s correct baseband for UK, please?
Baseband switcher is cwm flashable,so you've got no worries there. I have no clue if its the right baseband
Sent from my MB526 using xda premium

[SOLVED] No radio after rooting, tmobile USA

Hello,
Trying to get my new mb525 setup. Got it last night and everything worked well as far as the radio, able to get 3G with decent connection speed.
After rooting and installing CM10 (quarx) I'm not getting anything on the network, no 2g, no 3g, and just "emergency calls only". Thought it might be the tmobile sim card, but tried others and still no luck. Put in an old AT&T sim card and got a connection, so seems that there is something wrong with the radio itself, at least for the frequencies I need, but for GSM I'd think there wouldnt be any problem since all the radios are quad band GSM, right?
I've tried using standalone Baseband Switcher, as well as the one built into CM with no luck. I also tried the 3G fixes, replacing the files in /system/etc/motorola/bp_nvm_default with those in freq_F_US_342_107-850-1700-2100-signed.zip.
Baseband is at EPU93_U_00.60.03, and I know it has previously had JRDNEM_U3_3.4.2_177-003_BLUR_SIGN_SIGNED_USAJRDNEMARAB1B8RTGB03A.0R_PDS03C_USAJRDNFRYORTGB_P019_A010_HWp3_Service1FF.sbf flashed onto it. Have rebooted, reflashed, wided dalvik/cache/system quite a few times since last night, with no luck.
Is there a solution for this? I would appreciate any insight.
Thank you,
Anybody?
Has anyone ever had similar problems and been able to fix it? After searching a bit I've found threats of others with the problem, but seems no one has ever posted a real solution
Re: No radio after rooting, tmobile US
Did you install any custom kernel?
Sent from my MB526 using xda app-developers app
rodrigojfuentes said:
Did you install any custom kernel?
Sent from my MB526 using xda app-developers app
Click to expand...
Click to collapse
Yes, I've tried both the signed kernels here http://defy.wdscript.fr/kernel/, that were linked from this thread http://forum.xda-developers.com/showthread.php?t=1795647.
So following up on this.
I flashed the JORDN_U3_6.36.0_SIGNED_USAJRDNTMOB1B4B5DE1028.0R_JORDANTMO_P022_HWp3_Service1FF.sbf.gz sbf file, Tmobile base, as a start. No signal. Pulled the official OTA update, still no signal. This puts baseband version at epu93_U_00.58.00, and kernel at 2.6.32.9-g8431013.
Rooted with Gingerbreak and installed Baseband switcher, have tried each of the 3 TMobile bands and still no signal.
At this point I've largely given up on getting this to work for me, but now I just want to understand why it doesn't. Is there something that controls the radio that wouldn't be taken care of by flashing and SBF? Is there anything that controls radio frequencies/firmware besides this, and is there any way to determine what frequencies a current radio firmware supports?
Does anyone have a working tmobile nandroid backup that I could compare with this?
Seems unlikely, but is it possible that this is a hardware issue that just happened to occur while I was initially putting on CM10?
I realize this is a wall of questions, so thanks for reading this far
Last update.
Success, I'm a dumbass. I finally realized that the baseband I was selecting wasn't for the network I was trying to connect to, it was for the radio hardware! One of the Chinese firmwares, ME722 1.0 was perfect for me, and seems to support more than just the bands listed in CM. Says 850/1900/2100, but I'm getting nice HSPA speeds on tmobile, which is in the 1700 mhz band, so great stuff.
Hope this helps someone else, and saves them a few hours.
rman88 said:
Last update.
Success, I'm a dumbass. I finally realized that the baseband I was selecting wasn't for the network I was trying to connect to, it was for the radio hardware! One of the Chinese firmwares, ME722 1.0 was perfect for me, and seems to support more than just the bands listed in CM. Says 850/1900/2100, but I'm getting nice HSPA speeds on tmobile, which is in the 1700 mhz band, so great stuff.
Hope this helps someone else, and saves them a few hours.
Click to expand...
Click to collapse
Can you please provide linke to ME722 1.0 Chinese firmware that you used to solve this problem. I have a dead defy that is almost in similar state. No signal whatever i try.

[Q] [NOT FIXED- GS4 Lots of issues with radio signal and calls!!!! PLEASE HELP ME!

Hi guys, first of all let me share al my specs in order to place my question properly:
PHONE MODEL: Galaxy S4 SGH-I337M (the original stock kernel was: Build Date: 30.05.2013 -> Region: TCE (Mexico) PDA: I337MUMUAMDL Changelist: 518267 Android: 4.2.2)
Actual Rom: CyanogenMod -version: 10.2 10.2-20130923-nightly -jftlecan
Compilation number: cm_jfltecan-userdebug 4.3 JLS36G eng.jenkins.20130923.022829 test-keys
Recovery Mode: CWM via Rom Manager Pro app
So saying that I will say this: I came from stock to CM wiping Factory Reset and data/cache only and I used Odin for rootint the device....no problems at all, runs like a charm...
MY ISSUE #1: A couple of auto-updates ago (via Rom Manager), I start to notice that the radio bars (telephony signal, mobile internet signal bars) were from 1 to 2 bars in places I always get full bars (I live on a 7th floor with excelent signal at Mexico City). I searched on the forums (XDA developers and here) and it seems that ROOTED DEVICES SHOW THE REAL SIGNAL PROVIDED BY THE CAREER---->can someone confirm this? Is my phone showing the real signal strenght?, eventhough, keep reading to see that low signal bars are only the beginning...
So as i said, I didnt worry pretty much, because if the bars are little low, but i have a good quality service, who cares? but the REAL PROBLEM appears when another update came and when Im trying to use my mobile internet (4g or 3G, doesnt matter) the signal cuts exactly at the moment of loading a page or any info....it as happened with almost all apps (specially Facebook, Waze and Google Maps)
It happens as follows:
1.- Open any app, like Dolphin browser or Firefox
2.- Page starts to load info (LTE showing download and upload state)
3.- LTE-3G or whatever, shuts down (I see only the telephony signal bars and there is no internet signal)
4.- Wait few seconds, LTE-3G whatever is back...have to try again and agin until LTE remains steady (sometimes it wont until I reboot)
ISUE #2- DURING CALLS:
- Sometimes people cant hear me, but I can hear them...restart the phone and the issue fixes it self...buts is very annoying to restart my phone every single time somebody calls me and they cant hear me
I dont know what to do guys? Shall I wait until final CM10.2 comes to light? Somebody has this bug also? Is this bug part of CM? or there is another app making this rare behaivour...(do you recommend me another ROM for this model of GS4??)
EDIT: I tried to flash the original modem.bin (via ODIN) which is used by my carreer (TELCEL, son of Slim AKA "The richest man on Babylon :silly: is the company´s name). So until now, I can tell that in my first attempts of opening pages or facebook, the randomly LTE turning off-on continues...I will keep testing with this "orginal" flashed modem....
SOMEBODY TAKE OUT MY MISERY!!!!!! :highfive:
duendemago said:
SOMEBODY TAKE OUT MY MISERY!!!!!! :highfive:
Click to expand...
Click to collapse
It's defiinitely a modem issue. You can flash new modems and try. (backup efs before doing so, actually if you dont already have one - do it before now and save yourself some grief)
If that's not fixing the issues...
I'd backup what you need and start fresh. It would be the easiest way to resolve all your issues. Maybe even try a different kernel set for your region and phone.
Kies has a useful firmware recovery option that sets you back to stock.
The Kies will use your model number and serial to get you your stock firmware and reset you back. Id wipe all data under settings then do it. After its done, do another factory reset in recovery.
Instructions here - http://www.samsung.com/us/support/faq/FAQ00048586/52928
skavis said:
It's defiinitely a modem issue. You can flash new modems and try. (backup efs before doing so, actually if you dont already have one - do it before now and save yourself some grief)
If that's not fixing the issues...
I'd backup what you need and start fresh. It would be the easiest way to resolve all your issues. Maybe even try a different kernel set for your region and phone.
Kies has a useful firmware recovery option that sets you back to stock.
The Kies will use your model number and serial to get you your stock firmware and reset you back. Id wipe all data under settings then do it. After its done, do another factory reset in recovery.
Instructions here -
Click to expand...
Click to collapse
Thanks for that advice, i guess Im going to do all that if a new kernel doesnt fix the issue (I havent found any kernel for my region which supports Android 4.3, only 4.2.2, and someone told me is not correct to install such a kernel). Good day to you!
skavis said:
Kies has a useful firmware recovery option that sets you back to stock.
The Kies will use your model number and serial to get you your stock firmware and reset you back. Id wipe all data under settings then do it. After its done, do another factory reset in recovery.
Instructions here -
Click to expand...
Click to collapse
So after done all the "back to stock" steps, I still get this questions:
1.- Would I still be ROOT but with stock firmware (Touchwiz) and cool features originally made for Samsung GS4? (such as air gestures, etc etc)
2.- If im "unrooted" by the steps described in your link, can I upgrade to 4.3???
Thanks you are so kind!
Check out GoldenEye ROM or MDOB ROM in the development forum. They are extremely stable, super fast, tw and excellent battery life. CM is awesome, but is seriously way to flawed for our S4's right now to use for day to day life.
agent929 said:
Check out GoldenEye ROM or MDOB ROM in the development forum. They are extremely stable, super fast, tw and excellent battery life. CM is awesome, but is seriously way to flawed for our S4's right now to use for day to day life.
Click to expand...
Click to collapse
Thanks. I successfully installed stock Rom (Touch Wiz) and the signal has been impecable (full vars and excellent internet speed). I have to say that stock Rom is faster than CM in its current state I'm having a better experience right now ( and didn't had the time to explore all the Samsung apps in their depth) thanks again for your kind help!!!
Sent from my SGH-I337M using xda app-developers app
The only issue now us a random Error in google play when trying to download something and I can't use sir gestures... Thanks again
Sent from my SGH-I337M using xda app-developers app
Itried that
duendemago said:
The only issue now us a random Error in google play when trying to download something and I can't use sir gestures... Thanks again
Sent from my SGH-I337M using xda app-developers app
Click to expand...
Click to collapse
Itried the above but just wont work I think I will try flashing different modems
lithiiumflower said:
Itried the above but just wont work I think I will try flashing different modems
Click to expand...
Click to collapse
Same as you... LTe and 3G are still having disconnections every time the screen is loading some page (facebook, explorer, playstore... you name it!!) Dont know what to do
I can still try to flash the original modem... Or is there some way to know if our modems are up to date or not??? Heeeeeeeelp!!!!!!
Sent from my SGH-I337M using xda app-developers app
duendemago said:
The only issue now us a random Error in google play when trying to download something and I can't use sir gestures... Thanks again
Sent from my SGH-I337M using xda app-developers app
Click to expand...
Click to collapse
You're having that issue on either GoldenEye or MDOB or factory?
Man, I decided to return to full stock rom...LTE in perfect shape now...dont know what happened...i flashed with odin the exact version indicated in forums for making only the root without the custom rom or recovery...even that soft rooting is making my modem going crazy...i prefer stay this way until someone releases a decent full version for a GS4 SGH-I337m thanks guys
Did you try one of iB4STiD's ROMs? They work perfectly. CM is just way to full of bugs.
Sent from my SAMSUNG-SGH-I337 using Tapatalk 4
agent929 said:
Did you try one of iB4STiD's ROMs? They work perfectly. CM is just way to full of bugs.
Sent from my SAMSUNG-SGH-I337 using Tapatalk 4
Click to expand...
Click to collapse
I haven´t...and yes CM is still full of bugs...thanks for advice!
sad
duendemago said:
Same as you... LTe and 3G are still having disconnections every time the screen is loading some page (facebook, explorer, playstore... you name it!!) Dont know what to do
I can still try to flash the original modem... Or is there some way to know if our modems are up to date or not??? Heeeeeeeelp!!!!!!
Sent from my SGH-I337M using xda app-developers app
Click to expand...
Click to collapse
How did you go mine still up the creek I have tried everything possible that I have been advised thanks to a kind senior member I am writing down all the evil things I did to my device to hopefully be able to fix whatever I did because no amount of flashing using ODIN or KIES reset works there seems to be something missing from my fone I just wish I knew I started disliking it
---------- Post added at 10:12 AM ---------- Previous post was at 10:03 AM ----------
How did you go mine still up the creek I have tried everything possible that I have been advised thanks to a kind senior member I am writing down all the evil things I did to my device to hopefully be able to fix whatever I did because no amount of flashing using ODIN or KIES reset works there seems to be something missing from my fone I just wish I knew I started disliking it
duendemago said:
I haven´t...and yes CM is still full of bugs...thanks for advice!
Click to expand...
Click to collapse
Well I just went back to original stock firm ware via Kies, and now the radio signal issues are gone!! CM 10.2 didn't work well for me as the stock rom is now working in my phone. Something tells me that some times it's better to just rooting (for enjoying cool apps as Greenify) and not installing custom Roms (because all this kernel carnival is just to much, and appart of all we have to install radio firmware? Just no!)
Sent from my SGH-I337M using xda app-developers app

Categories

Resources