Database Users

[Q] Cyanogen Mod - Help - Zte Blade stuck at Green Andoid Image at startup-Won't Boot

Hi, first time modding and I've come up with a problem.
Baisically what's wrong now:
Phone is stuck at large green android logo when I turn on the phone.
Can't boot into Cyanogen
Can't get Clockworkmod to open
Phone only turns off with a battery pull
How I got the phone to this point:
Followed the instructions at wiki.cyanogen
(Backed up with titanium backup pro)
The first time I installed the mod I got stuck in a boot loop. But I fixed this by deleting data and cache in Clockworkmod and going through the steps again.
The phone and it's new mod seemed to work. I installed the google apps.zip, via CLockwork, still fine.
Then I tried to reinstall apps from Titainium Backup.
Some of these went well, but I started to get 'com.google.process.gapps' stopped working force close notifications.
I rebooted to see if that would make them stop.
But I got stuck in a boot loop of the Cyanogen animated logo, where it would boot, show me the unlock screen, I would unlock it, get another 'com.google.process.gapps' message and the phone would then freeze and reboot. The sequence then continued.
I tried battery pulling and tried to boot into Clockwork by holding down Menu Up and Power. But not after a while it just shows the green android logo. HELP.

I didn't read all!
So...
this problem is easy fix!
I spent 3 Hours with my blade to get my Blade II to work!
you have same problem which some other has posted somewhere here...
search on google or on Modaco: ZTE Blade TPT GEN1 or GEN2...
follow instructions!
now Blade II needs to work!

http://android.modaco.com/topic/343587-guide-de-bricking-a-zte-blade/

[help] m2 Boot looping or boot stuck

Hi,
Boot looping problem with my m2.
Was flashed
20111012-0056-Nightly-v1.0
(previously was on MIUI 1.10.8, before that was the MS2Ginger rc).
With that version of CM7, the phone will drop call while the battery low dialog pops up sometime. Maybe the cpu vel is too low.
Also when last time this happened, the phone shutdown itself and now it's boot looping.
Some time it can boot over the bootmenu (can see the blue/green led), but after that stuck at the boot logo or boot into black screen.
few time it can boot into Android.
Most of the time it can't even boot over bootmenu, just stuck at the boot logo.
Reflashed and wiped everything and it doesn't help.
Reflashed MIUI on to it and same problem.
Tried to get the logcat running but it only says waiting for device,
though I plugged the phone but got nothing on the command line.
//===update
using RSD Lite to flash the phone will fail because
"error getting subscriber unit"
or "error erasing subscriber unit"
Any suggestion?
Regards,

skygunner said:
Hi,
Boot looping problem with my m2.
Was flashed
20111012-0056-Nightly-v1.0
(previously was on MIUI 1.10.8, before that was the MS2Ginger rc).
With that version of CM7, the phone will drop call while the battery low dialog pops up sometime. Maybe the cpu vel is too low.
Also when last time this happened, the phone shutdown itself and now it's boot looping.
Some time it can boot over the bootmenu (can see the blue/green led), but after that stuck at the boot logo or boot into black screen.
few time it can boot into Android.
Most of the time it can't even boot over bootmenu, just stuck at the boot logo.
Reflashed and wiped everything and it doesn't help.
Reflashed MIUI on to it and same problem.
Tried to get the logcat running but it only says waiting for device,
though I plugged the phone but got nothing on the command line.
Any suggestion?
Regards,
Click to expand...
Click to collapse
Have you tried flashing the stock .sbf via RSD Lite?

Yes was trying that. But the falshing doesn't seem to be completed sucessful.
Stuck at sw update in progress...
RSDlite 4.9 shows error getting/erasing subscriber unit?
It seems like the phone has been disconnected before the flash completes

See this thread and particulary this :
EVEALEX62 said:
It's good for me !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Yououououououououououou !!!!!!!!!!
I don't know if all this is nécessary but it's what I have doing .....
1rst, I have full charge my battery !
I have do this (all step 1 to 11 because "boot up the phone manually" ) with the sbf 2.2.2 officiel but modify whith this post :
The first time don't work but the second time it's good !!!!
So BIG thanks to all people have help (pat972, Atomos33,Emacore,dangpzanco,will5, motodoido) , but especially to r2beta0 et Mikevhl
Click to expand...
Click to collapse

My phone is stuck with the first logo screen!

Hi all,
I would like to brief wat happened actually to my fone!
First, I rooted my firmware 2.3.5 XXJVT as per the instructions given. My mob got rooted successfully. I installed busy box and gave su permission and restarted my fone.
It didnt restarted. It was restarting again and again with the startup screen coming again and again.
I went to download mode and re-rooted it again stll had the same problem.
Done resetting too.
Finally I flashed using ezodin to froyo. Followed which restarting has stopped and now stucked with logo screen.
kidnly help me! I would literally cry!!!!!!!!

NOTE: I can able to go to download mode.
I can able to go the factory reset page in my mob too.

Download another rom, flash again. And use Odin this time.

[Q] TWRP 2 crashes, need a fix!

My a500 has been running fine for almost two years on Lightspeed 4.8, Bundle 17 on A500APXFlash. This morning, every time I try the power button, it starts to load the bootloader, then crashes. It seems to be destabilizing. Everything was working fine yesterday, then suddenly the ROM would do a bootloop, so I went in the TWRP recovery. I wiped the last ROM, then tried to restore the same ROM from a backup. As the ROM was restoring, suddenly the device shut down. I tried to start up the bootloader, but only got to the splash screen. Now, the tablet will vibrate and won't even get to the splash screen. If you have any ideas, please help!
Thanks in advance

Soft Brick Help me!

Hello everybody was already a bit 'that I have the rom optimus g3 1.3.2 with the stock kernel, a week ago I changed it by putting the dorimanx and I had made up with flashify, today it is no longer happy with the consumption I restored the stock kernel always flashify, shortly after this the phone is restarting showing for a second lg logo and just a black screen (but the screen is access). While pressing the accession reboots and shows the logo again black screen, I also made up the boot with the recovery TWRP but I do not know how to access it.
Give me a tip for pleasure.
EDIT:
Solved after failing 30 times to enter recovery and restore backup (saint who invented the recovery amended), Sorry for the inconvenience.