Hello everybody was already a bit 'that I have the rom optimus g3 1.3.2 with the stock kernel, a week ago I changed it by putting the dorimanx and I had made up with flashify, today it is no longer happy with the consumption I restored the stock kernel always flashify, shortly after this the phone is restarting showing for a second lg logo and just a black screen (but the screen is access). While pressing the accession reboots and shows the logo again black screen, I also made up the boot with the recovery TWRP but I do not know how to access it.
Give me a tip for pleasure.
EDIT:
Solved after failing 30 times to enter recovery and restore backup (saint who invented the recovery amended), Sorry for the inconvenience.
Related
So I was running CWM (Philz) I believe, and I had been running into issues while on rooted 4.2.2 D800 stock ROM. There were force closes and random reboots, etc. I've only installed xposed mods. I've also used android tuner to adjust some of the build.prop and kernel presets.
However, after my phone got stuck in what I thought was a boot loop, I finally got it up and running. What happened next was odd. I tried booting into recovery -> the "LG" splash screen showed up and it went into another infinite boot loop.
I'm assuming I somehow corrupted or lost my recovery. Any advice on what to do? I don't know if I should follow the original instructions for flashing a recovery here - http://forum.xda-developers.com/showthread.php?t=2633150.
Edit: Jesus christ my phone infuriates and confuses the hell out of me. After attempting to enter the recovery again, I am now stuck in a permanent boot loop. The last time I fixed it was by turning my phone off....and then *WAITING*.
What? That doesn't make sense you say? Of course it doesn't. But that's still what worked. I waited 12 hours, and then tried turning it on again. When I did, oh look, the AT&T screen!
CONFUSING. help please...
Double edit (Hard Mode): Going into download mode when I'm in this constant bootloop = nothing happens. That little icon that says "Download Mode" with the 5 blue circles just stays there, and my laptop ends up not recognizing anything. This happened the last time too, and all I was able to see on my laptop was "QHSUSB_BULK". I thought this meant that I would have to do a complete wiping process through Linux (found on another thread somewhere), but apparently waiting 12 hours also fixed the problem.
Hello everyone,
i tried installing CM11 on my d802 with CWM. Flashed the zip and worked fine but im now hanging in a boot loop and only the CM splashscreen is showing. I tried to boot into recovery but it wont let me, only thing working is the download mode. I searched a couple of threads here but didnt really found anything that helps me.
Hope someone got an idea how to get my G2 working again, dont even care much if its stock or CM.
seasen said:
Hello everyone,
i tried installing CM11 on my d802 with CWM. Flashed the zip and worked fine but im now hanging in a boot loop and only the CM splashscreen is showing. I tried to boot into recovery but it wont let me, only thing working is the download mode. I searched a couple of threads here but didnt really found anything that helps me.
Hope someone got an idea how to get my G2 working again, dont even care much if its stock or CM.
Click to expand...
Click to collapse
This happend to me with my LS980, heres what I did, i waited until my G2 was fully charged, i knew it was fully charged becuase in download mode you should see the letter B, the letter B indicates the battery, if your battery is at "B100" detach your phone from the charger, hold the power button for the phone to restart, and quickly press and hold the power button and the volume down button at thw same time,, repeat this step again quicly after the Boot Logo shows up, and you should boot into Recovery Mode and restore your backup.
Sent from my LS980 running PA 4.4.4 KitKat using Tapatalk???
I tried that for like a 100 times, it wont start into recovery. it just starts back to the splashscreen.
trying this now : http://forum.xda-developers.com/showthread.php?t=2432476
howw to charge the phone when it on bootloop,whenever i plugged the cable its start bootloop
Hi everybody,
Yesterday I was installing simple kernel on my LG G2 European version 32 GB with the latest nightly from Cyanogen 11. I had twrp recovery and stupidly used Clocwork mod Rom Manager app to go in recovery, I didn't know these two were not compatible. After that the only thing I had in the screen was the LG logo, so I tried everything to restore it and finally with LGMobile Support Tool I succeded in reinstalling the original Rom. But after I boot up I get the screen I uploaded, where it is asking me some kind of pin or password, but I really don't know what is it talking about. While on this screen I get a click periodic sound every 2 seconds. I tried to boot in recovery or hard reset, nothing happen. I'm totally lost right now. what can I do? Thanks in advance
Dear Team,
A brief history
I have a LG G2 D802 with Cyanogenmod 13 installed, It was working fine for a month or so. I used to flash CM13 nightlies and use comfortably. I use the TWRP recovery. Every now and then, there used to be the "error updating from zip" while flashing, but have managed to reflash and make things work somehow. Worst case scenario, I used to put the phone in download mode and flash stock Lollipop rom and then root and flash CM 13.
Current Situation-Problem
Last week while flashing the latest CM 13 nightly, the "error updating from zip" came and then whatever I tried couldn't make the phone boot normally. Finally decided to go into download mode and flash stock Lollipop rom. Unfortunately, half way through the process, the flash tool showed an error and I made the dumbest decision of pulling the usb cable from the laptop. Post that, the phone is always booting to LG boot logo and staying put. I tried rebooting to recovery and putting it in download mode, so many times. Every time I am greeted by the stubborn LG logo mocking me at my frustration
Please let me know your thoughts. If I can manage to put it into download mode somehow, I am confident of bringing my G2 back to life. Kindly assist me with your inputs.
This is my first post on XDA, kindly bear with me in case I have made any mistakes.
Thanks in advance,
TekGru
About 2 months ago I couldn't access Download Mode and I realized that it was probably because I couldn't really turn off the phone, like we can do to any phones with removable battery. So I've searched YouTube and found some videos teaching how to remove back cover and unplug the battery pin. After doind that I've waited about 30 seconds, replugged it and tried to access Download Mode and... violà, success
Note that you don't have to remove the battery, just unplug the pin, so the phone turns off completely.
Hi,
I have a Note 4 t-mobile that is "brick" right now. and I hope if anyone offer assistance.
It is running Android 6. Ever since the last upgrade the phone would freeze and reboot on its own. I fixed that problem by installing Wake Lock. After that it would still experience sluggish at time but the phone is still very much usable.
Lately, after watching a bit of streaming video the phone would slow down so much that a reboot is needed. But yesterday my last reboot turned my phone into a brick. After that reboot the phone rebooted itself to the download mode. So I took the battery out, waited for a few minutes and put the battery back in and started the phone. Instead of booting normally the phone displayed the message including "set warranty bit: recovery" and then followed by the flashing TWRP splash screen. By "flashing TWRP splash screen" I mean the TWRP splash screen ( with the TEAMWIN logo) would be shown on the screen for a second, then the screen black out for a couple of seconds, then the splash screen is back on for a second, and the screen black out for a couple of seconds, etc, and never successfully boot into TWRP recovery. I had left the flashing splash screen overnight and nothing changed. Connect the phone to my pc via usb and fastboot wouldn't recognize my phone when phone was flashing the TWRP splash screen. So I tried to flash TWRP again by starting my phone in download mode "volume down + power". When I connected my phone to my pc Odin recognized my phone. But when I tried to flash a custom recovery (TWRP or CWM) it seems the download started but never finished (on the phone I could see the progress bar started but never progress further).
Any suggestions would be greatly appreciated1
Additonal info
I just wanted to add that my phone is still running the stock ROM.
Problem solved
Problem solved. Once I used a different cable and the download process actually worked and I was able to flash stock ROM using Odin.