[Q] Help! Can't flash back to 2.2 - Defy Q&A, Help & Troubleshooting

I watched this video on how to install Jelly Bean 4.1.1 and installed the software. I've been trying to go back to the original 2.2 Blur with T-Mobile. I've tried multiple times to flash the jordan sbf file. I flashed it and when it's done it tells me to manually power up my phone. My Defy is stuck doing boot loops. I have a standard Defy with green lenses. Please help me out.

you need to push down the volume button and go to stock recovery.from there wipe data+cache and it will start

iggie94 said:
I watched this video on how to install Jelly Bean 4.1.1 and installed the software. I've been trying to go back to the original 2.2 Blur with T-Mobile. I've tried multiple times to flash the jordan sbf file. I flashed it and when it's done it tells me to manually power up my phone. My Defy is stuck doing boot loops. I have a standard Defy with green lenses. Please help me out.
Click to expand...
Click to collapse
press vol + and power button ,
enter recovery (stock )
wipe data /cache , factory reset and reboot

Cristi_10 said:
you need to push down the volume button and go to stock recovery.from there wipe data+cache and it will start
Click to expand...
Click to collapse
I can only get to the triangle screen with the the little Android. I try pressing both volume up and down at the same time and it just stays on that screen.

Please ask questions in Q&A. Thread moved there.

TeeJay3800 said:
Please ask questions in Q&A. Thread moved there.
Click to expand...
Click to collapse
Sorry

Can I please get some help?

Well, I fixed myself. Since no one wanted to help me any further.

Then dont be an *** and share what you needed to do, in case anybody else needs this information too.
Just imagine it would be you finding your solution.

ArRaY92 said:
Then dont be an *** and share what you needed to do, in case anybody else needs this information too.
Just imagine it would be you finding your solution.
Click to expand...
Click to collapse
Well, I'm not trying to be an ass. I was just struggling for almost two days on how to fix my Defy. I was stressed. I found a solution and I just got a little ticked off that more help wasn't available. I'm not tripping though.

iggie94 said:
Well, I'm not trying to be an ass. I was just struggling for almost two days on how to fix my Defy. I was stressed. I found a solution and I just got a little ticked off that more help wasn't available. I'm not tripping though.
Click to expand...
Click to collapse
I completely understand your issue, because I know this situation myself, see my issue with maps a few threads down in this forum.
Also please do not be offended, but instead please share your solution, so other people can profit from it, too.
I was trying to encourage you, forgive my wording

Related

Well crap...I think I bricked it :-(

I tried to unroot my phone via OCLF from the market. It went dark, then got the normal Vibrant screen, the the Galaxy S screen, then it went dark again. Now, it just sits. Black screen. All the buttons at the bottom are lit up. :-/
Anyone?
Silly question, I know. But did you have a nandroid backup, by any chance?
This is probably a last resort, but try boot into recovery and wipe everything. This fix the problem for me, the downside is you lose all you data.
Sent from my SGH-T959 using XDA App
If you are anything like me, recovery didn't work and using Odin and reflashing Stock with repartition didn't work either.
You'll need to use odin to flash Eugenes "Vibrant that doesn't brick" (NO REPARTITION), then use odin again to flash Stock (check repartition this time) and you'll be good to go.
You can try to flash the froyo rom with odin...... I had that same exact problem and this is what fixed it for me. Once froyo us flashed then you can flash whatever rom you want. Hth
Ok, I probably should have stated that I'm a complete newby and have no idea what I'm doing. I believe I do have nandroid, but other than that you all are speaking French to me.
Right now I'm in the recover mode (I think). It's hooked up to my computer and I'm in the "Downloading... Do not turn off target!!" mode. This is where I'm stuck...I have no idea where to go from here.
Please talk to me like I'm a 5 year old, because as far as this is concerned, I am!
Oh, and thank you so much for any help you can give me!
hospo said:
Ok, I probably should have stated that I'm a complete newby and have no idea what I'm doing. I believe I do have nandroid, but other than that you all are speaking French to me.
Right now I'm in the recover mode (I think). It's hooked up to my computer and I'm in the "Downloading... Do not turn off target!!" mode. This is where I'm stuck...I have no idea where to go from here.
Please talk to me like I'm a 5 year old, because as far as this is concerned, I am!
Oh, and thank you so much for any help you can give me!
Click to expand...
Click to collapse
Well, good news is... you didn't brick your phone, this is recoverable. Best idea would be to search the forums on how to ODIN back to Stock. Theres plenty of posts on how to do it. You should also be able to find this in the tips & tricks threads. Good Luck.
Thank you all for your help! I recovered it!! Seems as though I was just going about it the wrong way!! I got into the actual recovery mode and cleared it all out. Now it's as good as new!
Again, appreciate your help and patience with what I'm sure is the 120,000th post on this subject. ;-)
Kienz said:
Silly question, I know. But did you have a nandroid backup, by any chance?
Click to expand...
Click to collapse
Is it even possible to make a nandroid backup before rooting?
hospo said:
Thank you all for your help! I recovered it!! Seems as though I was just going about it the wrong way!! I got into the actual recovery mode and cleared it all out. Now it's as good as new!
Again, appreciate your help and patience with what I'm sure is the 120,000th post on this subject. ;-)
Click to expand...
Click to collapse
Hey - what does you doing? Please told me, I've the same problem:
If I start the phone with an USB cable and the battery symbol with the running point under this, the PC recognize that something is connected, but Windows found no driver....
How could you could flash the Stackfirmware back, if the recovery and download menu does not work ?
PLS help !!!
Check out this thread http://forum.xda-developers.com/newreply.php?do=newreply&p=8129898
Go to the section where it says "Did You Flash Something Before Disabling Voodoo? 2 Fixes to Help You Out."
And do fix #1 it is pretty easy and it wont take you more than 20 minutes.
Let us know if that works
And do fix #1 it is pretty easy and it wont take you more than 20 minutes.
Let us know if that works
Click to expand...
Click to collapse
If I following the link and the next one, I can read:
Caution!!! You Must be on STOCK Vibrant Rom & NEVER Have Already Flashed the JP3 Froyo Image
Click to expand...
Click to collapse
It isn't -> it's a Firmware for the normal Galaxy (3key)[I'm a idiot]
First,
You must already Have Odin installed & Know how to boot into Down-loader Mode!!
Click to expand...
Click to collapse
Thats also the problem as described in front : I have had no chance to received the DL Mode.. maybe I make something wrong? The phone is booting up till the "S" is there, after that, the screen is black, keys are lightning...
The recovery 3button are blocked from the beginning; the DL Menu - I did not have reached it successfully
The PC recognize, that is something on USB, but not what ... so Odin did not see the Mobile, too.

[Q] problems with cyanogen azure

Hi
Ive just installed my first rom which is azure from cyanogen.
My problem is that i cant install appz. My browser displays something like it cant read page. Ive tried different programs and the barcode scanner.
I can only install by connecting to computer and install a apk using sdk developer.
Have somebody else experienced this problem or know what to do?
By the way, it writes you dont have permission to view this site and the it shows the url
you have to flash Gapps too, wich you can find on his webpage : )
*twitch, twitch*
great! Ive found it... thx a lot
HELP again
arggghhhh I cant get in recovery mode...
It just shows a phone with a red triangle....
Can anybody help me, so i can flash the zip-file(gapps) to my phone?
thegenni said:
arggghhhh I cant get in recovery mode...
It just shows a phone with a red triangle....
Can anybody help me, so i can flash the zip-file(gapps) to my phone?
Click to expand...
Click to collapse
What if you tryed and search a bit on the forum, everything you've asked so far is alleredy answered in several threads in here. "Questions are placed in general.."
thegenni said:
arggghhhh I cant get in recovery mode...
It just shows a phone with a red triangle....
Can anybody help me, so i can flash the zip-file(gapps) to my phone?
Click to expand...
Click to collapse
If you flashed Azure, you have also on your phone ROM Manager. You can open ROM Manager and install the gapps from there (select "Install ROM From sdcard").
Or, if you're at the screen with the phone and the red triangle, you can keep pressed Vol UP + Power till a blue menu appears. Choose "flash update.zip" from that menu and you'll end up in the green recovery menu from which you can also select the gapps zip to flash.
HpX said:
What if you tryed and search a bit on the forum, everything you've asked so far is alleredy answered in several threads in here. "Questions are placed in general.."
Click to expand...
Click to collapse
I hadnt written a post here unless I was having a hard time finding it. Notice the time between the posts...... Thats the time ive spend searching for a solution.
Dont post in a thread just to make an angry outburst...... Atleast give me something helpful:-(
thegenni said:
arggghhhh I cant get in recovery mode...
It just shows a phone with a red triangle....
Can anybody help me, so i can flash the zip-file(gapps) to my phone?
Click to expand...
Click to collapse
How old are you? 12? Geez.. Where did you search for it? Wikipedia? Read Rapier's post, the answer is there.

please help odin won't connect

I will try and explain as best as I can, please forgive me as I am a nexbie to thid flashing firmware, I flashed my galaxy s fron froyo 2.2 to the gingerbread stock 2.3 XXJVR from this site and everything went fine but wanted to use the MilkyS rom so downloaded everything and followed the instructions exactly but Odin just can't connect, Keis connects fine and odin finds the phone when it is switched on but when I put it in download mode there is something really wrong as I don't get the download screen that I originally had with the yellow triangle and the android man but now when I go into download mode I get a screen with blue writing at the tp saying reboot system now
apply update from SD card wipe data/factory reset
wipe cache partition
then I have yellow writing at the bottom of screen
copying media files
sucsessfully copied "manual mode"
applying Multi CSC....
Installing Multi-CSC.....
Applied the CSC - code "CPW"
Sucsessfully applied multi-CSC.
and if I leave it like that for too long the battery seems to smell like its melting or something, I have tried everything on another laptop running windows XP as well as windows 7 but no joy can anyone please help me with this issue, please explain in plain english and not to techy as I am a newbie and not much good at this stuff, thank you so much for any help, I am in the Uk..
So you post this problem in the "Development Section"? Why? Please please post this in the Q and A section and your question will be anwered.
Sent from my GT-I9000 using XDA Premium App
I sense OP Iron Fist soon approaching....
tanzi said:
I will try and explain as best as I can, please forgive me as I am a nexbie to thid flashing firmware, I flashed my galaxy s fron froyo 2.2 to the gingerbread stock 2.3 XXJVR from this site and everything went fine but wanted to use the MilkyS rom so downloaded everything and followed the instructions exactly but Odin just can't connect, Keis connects fine and odin finds the phone when it is switched on but when I put it in download mode there is something really wrong as I don't get the download screen that I originally had with the yellow triangle and the android man but now when I go into download mode I get a screen with blue writing at the tp saying reboot system now
apply update from SD card wipe data/factory reset
wipe cache partition
then I have yellow writing at the bottom of screen
copying media files
sucsessfully copied "manual mode"
applying Multi CSC....
Installing Multi-CSC.....
Applied the CSC - code "CPW"
Sucsessfully applied multi-CSC.
and if I leave it like that for too long the battery seems to smell like its melting or something, I have tried everything on another laptop running windows XP as well as windows 7 but no joy can anyone please help me with this issue, please explain in plain english and not to techy as I am a newbie and not much good at this stuff, thank you so much for any help, I am in the Uk..
Click to expand...
Click to collapse
Omg...you are going in recovery...*facepalm*
Post in the right damn section next time.
Sent from my GT-I9000 using XDA Premium App
tanzi said:
I will try and explain as best as I can, please forgive me as I am a nexbie to thid flashing firmware, I flashed my galaxy s fron froyo 2.2 to the gingerbread stock 2.3 XXJVR from this site and everything went fine but wanted to use the MilkyS rom so downloaded everything and followed the instructions exactly but Odin just can't connect, Keis connects fine and odin finds the phone when it is switched on but when I put it in download mode there is something really wrong as I don't get the download screen that I originally had with the yellow triangle and the android man but now when I go into download mode I get a screen with blue writing at the tp saying reboot system now
apply update from SD card wipe data/factory reset
wipe cache partition
then I have yellow writing at the bottom of screen
copying media files
sucsessfully copied "manual mode"
applying Multi CSC....
Installing Multi-CSC.....
Applied the CSC - code "CPW"
Sucsessfully applied multi-CSC.
and if I leave it like that for too long the battery seems to smell like its melting or something, I have tried everything on another laptop running windows XP as well as windows 7 but no joy can anyone please help me with this issue, please explain in plain english and not to techy as I am a newbie and not much good at this stuff, thank you so much for any help, I am in the Uk..
Click to expand...
Click to collapse
Since the others wont offer any help. (and yes, i understand this is the development section and not the Q&A).
Try a Factory Reset, restart your phone.
Hold Volume DOWN+"Home" button+Power UNTIL you get to the screen with the yellow triangle specifying it's in download mode.
xWarMachine04 said:
Since the others wont offer any help. (and yes, i understand this is the development section and not the Q&A).
Try a Factory Reset, restart your phone.
Hold Volume DOWN+"Home" button+Power UNTIL you get to the screen with the yellow triangle specifying it's in download mode.
Click to expand...
Click to collapse
Im sure he would have gotten help once it was moved to the Q&A section.....
Should someone really be asking this if they are flashing ROMs? Cant tell the difference between recovery and download? Everyone starts out as a noob, but come on
And i said i understand that, but leave the moderating job to the moderators. If someone is in need, you should help them first instead of telling them they need to be somewhere else and THEN ->inform<- them where they should be posting. There's nothing wrong with being informative and empathetic.
xWarMachine04 said:
Since the others wont offer any help. (and yes, i understand this is the development section and not the Q&A).
Try a Factory Reset, restart your phone.
Hold Volume DOWN+"Home" button+Power UNTIL you get to the screen with the yellow triangle specifying it's in download mode.
Click to expand...
Click to collapse
Thank you xWarMachine04 for your help and to everyone else I am very sorry for posting this in the wrong section, I will take my slap n the wrist and will put it in the right section, also just a " I am afraid that you have put this in the wrong section so would you mind moving it please" would have been nice, it was a genuine mistake and just for the record I am a she not a he..........................
No problem, wish you all the best
xWarMachine04 said:
And i said i understand that, but leave the moderating job to the moderators. If someone is in need, you should help them first instead of telling them they need to be somewhere else and THEN ->inform<- them where they should be posting. There's nothing wrong with being informative and empathetic.
Click to expand...
Click to collapse
True enough, I thought it more funny then anything hence my iron fist post
My problem is I lack empathy
xWarMachine04 said:
And i said i understand that, but leave the moderating job to the moderators. If someone is in need, you should help them first instead of telling them they need to be somewhere else and THEN ->inform<- them where they should be posting. There's nothing wrong with being informative and empathetic.
Click to expand...
Click to collapse
if everyone was thinking the same , this section would have been named "Galaxy S I9000 Android Development/Q&A"
why would you post here when you know its wrong.
faster response?
Like i said, let the mods do their jobs. IF a thread needs to be moved because of a person posting it in the wrong area, let them move it. This is a simple mistake a LOT of people make every day. Nonetheless, tanzi got her help needed, problem solved.
This conversation is over.
Is lagfix disabled?
Sent from my GT-I9000 using XDA Premium App
Thanks for all the help and advice but I have now managed to get Odin connected and have now flashed DarkysRom 9.5 Extreme, so thanks again..............

mb525 Help with ERR:a5,69,35,00,27

Hi everybody.
Being short; I had miui 2.3.7f, I decided to change to the new miui V5, but the installation was wrong.
I couldn´t make the Wipes properly because the unit E:\ was unmounted, and the result, a slow system.
I decided to change the rom, but in this case,not using the TWRP recovery. I decoided to flashing SBF files via RSD.
The first one,was interrupt by slow battery, I tried later and nothing happens.
Reading in the forum, some user recommended this one DEFYPLUS_U3_4.5.1-134_DFP-2312_TMOUK_SIGN_DE..
and actually, is the only rom that I tried, that it shows the "M" logo before bootloader
At this point the bootloader 09.10 shows me the ERR:a5,69,35,00,27
I´m not sure but, could be a problem of kernel ? For put a rom of defy+?
I perfectly know, there are 4 or 5 threads about that, I read, but wasn´t useful for me
everything is welcome !!!
pikaetas said:
Hi everybody.
Being short; I had miui 2.3.7f, I decided to change to the new miui V5, but the installation was wrong.
I couldn´t make the Wipes properly because the unit E:\ was unmounted, and the result, a slow system.
I decided to change the rom, but in this case,not using the TWRP recovery. I decoided to flashing SBF files via RSD.
The first one,was interrupt by slow battery, I tried later and nothing happens.
Reading in the forum, some user recommended this one DEFYPLUS_U3_4.5.1-134_DFP-2312_TMOUK_SIGN_DE..
and actually, is the only rom that I tried, that it shows the "M" logo before bootloader
At this point the bootloader 09.10 shows me the ERR:a5,69,35,00,27
I´m not sure but, could be a problem of kernel ? For put a rom of defy+?
I perfectly know, there are 4 or 5 threads about that, I read, but wasn´t useful for me
everything is welcome !!!
Click to expand...
Click to collapse
re-flash sbf when RSDlite says that the device is rebooting and it does not, remove the battery and put it in again and go to stock recovery (vol down + power,when the android with the ! appear press both volume buttons) and make a factory reset.
Zeroemd said:
re-flash sbf when RSDlite says that the device is rebooting and it does not, remove the battery and put it in again and go to stock recovery (vol down + power,when the android with the ! appear press both volume buttons) and make a factory reset.
Click to expand...
Click to collapse
Thanks zeromd,I tried but when Im trying PWR+VOLDOWN, nothing happens.
Only when I stop to press, the bootloader apears again, with the error .
Could you explain me why the defyplus rom seems to boot, and not the rest ?
pikaetas said:
Thanks zeromd,I tried but when Im trying PWR+VOLDOWN, nothing happens.
Only when I stop to press, the bootloader apears again, with the error .
Could you explain me why the defyplus rom seems to boot, and not the rest ?
Click to expand...
Click to collapse
I own a Green Lens defy (mb525).
Yet I searched a bit and a guy in snother forum solved this problem flashing
DEFYPLUS_U3_4.5.1-134_DFP-231_CN_SIGN_UCADEFYEMARAB1B50AA009.0R_PDS03C_USAJRDNGIBRIRD15_P015_A030_Service1FF
but as the name suggests it is intended for the Defy+ (mb526) but It seems that you have flashed one alredy, so idk if you want to try it. and if by any chance the .sbf is not on you main HDD put it on you desktop.
Zeroemd said:
I own a Green Lens defy (mb525).
Yet I searched a bit and a guy in snother forum solved this problem flashing
but as the name suggests it is intended for the Defy+ (mb526) but It seems that you have flashed one alredy, so idk if you want to try it. and if by any chance the .sbf is not on you main HDD put it on you desktop.
Click to expand...
Click to collapse
Thanks again, but the file is´corrupt
Ill try to find it and I´ll let you know.
pikaetas said:
Thanks again, but the file is´corrupt
Ill try to find it and I´ll let you know.
Click to expand...
Click to collapse
Hi again.
Zeroemd, I´ve got some news........ IT´S ALIVE !!!!!!:laugh::laugh::laugh:
I finally found the correct SBF, it´s that
vvvvv.mediafire.com/download/31pbi59a275f7ry/DEFYPLUS_U3_4.5.1-134_DFP-231_CN_SIGN_UCADEFYEMARAB1B50AA009.0R_PDS03C_USAJRDNGIBRIRD15_P015_A030_Service1FF.sbf.gz
Now I want to go step by step making things as better as possible since arrive to Kit Kat !!!
The first .. nandroid.
Thanks a lot
pikaetas said:
Hi again.
Zeroemd, I´ve got some news........ IT´S ALIVE !!!!!!:laugh::laugh::laugh:
I finally found the correct SBF, it´s that
vvvvv.mediafire.com/download/31pbi59a275f7ry/DEFYPLUS_U3_4.5.1-134_DFP-231_CN_SIGN_UCADEFYEMARAB1B50AA009.0R_PDS03C_USAJRDNGIBRIRD15_P015_A030_Service1FF.sbf.gz
Now I want to go step by step making things as better as possible since arrive to Kit Kat !!!
The first .. nandroid.
Thanks a lot
Click to expand...
Click to collapse
Well I am Glad your phone is alive !
anything you need PM me :good:

Please help! Galaxy S6 Bricked. [Solved. Thanks Koop1955]

Hi guys, Ive searched and searched, but couldnt find anything that worked for me, so I apologize if this has been answered before.
I attempted to root my GS6 Sprint phone, and something has gone wrong. When the phone reboots the touch screen doesnt work at all and it doesnt find any cell signals.
I flashed to S6-UniKernel_v6-0001-ODIN, the firmware on the phone at the time was 5.1.1.
I tried to flash back using G920PVPU1AOCF_G920PSPT1AOCF_G920PVPU1AOCF_HOME.tar. but I get "FAILED" every time.
So I tried to install twrp-2.8.7.1-zeroflte.img, and that seemed to install fine, but I cant reset because even in TWRP I have no use of my touch screen.
I am using the samsung cable, and it does go to the Downloading mode, but as soon as I click start it fails.
Anyone that can help me fix this I would gladly paypal the cost of a six pack. (Mods if this isnt allowed please let me know)
Okay so here is what fixed it for anyone else like me that is a noob, and does dumb stuff to their phone. You cant roll back to old firmwares. You have to flash to the latest firmware that was on the phone or newer. I found the updated firmware and its good to go.
koop1955 said:
Minor correction. You can use the version that you started with or a later version. The only problems come if you try to use an earlier version, like going from 5.1.1 back to 5.0.2. Which won't work.
Here is the latest version available, should always work: https://www.androidfilehost.com/?fid=24269982087002159
Odin is available here: http://www.samsungodindownload.com/
Click to expand...
Click to collapse
Many thanks to koop1955 for his help, and thanks to everyone that jumped in to help a poor noob.
Demijinx said:
Hi guys, Ive searched and searched, but couldnt find anything that worked for me, so I apologize if this has been answered before.
I attempted to root my GS6 Sprint phone, and something has gone wrong. When the phone reboots the touch screen doesnt work at all and it doesnt find any cell signals.
I flashed to S6-UniKernel_v6-0001-ODIN, the firmware on the phone at the time was 5.1.1.
I tried to flash back using G920PVPU1AOCF_G920PSPT1AOCF_G920PVPU1AOCF_HOME.tar. but I get "FAILED" every time.
So I tried to install twrp-2.8.7.1-zeroflte.img, and that seemed to install fine, but I cant reset because even in TWRP I have no use of my touch screen.
I am using the samsung cable, and it does go to the Downloading mode, but as soon as I click start it fails.
Anyone that can help me fix this I would gladly paypal the cost of a six pack. (Mods if this isnt allowed please let me know)
Click to expand...
Click to collapse
Anybody? Literally ANY idea is worth a shot at this point.
Did you use Odin to root the device? What options did you set?
Zoolok said:
Did you use Odin to root the device? What options did you set?
Click to expand...
Click to collapse
Thanks for the reply Zooklok, I did use Odin, and I didnt change any settings.
So checked boxes under options are;
Auto Reboot
F. Reset Time
Thats all. I clicked "AP" to load the firmware, then clicked start.
Hello.. Assuming your phone is already rooted. Pls follow the below procedure
1. Restart and let the phone biot. Plug in your usb and insert a new for installation purpose
2. Hold and press power+up+home button to boot into recovery
3. Format and reflash the new rom
Should works like a charm
selferng said:
Hello.. Assuming your phone is already rooted. Pls follow the below procedure
1. Restart and let the phone biot. Plug in your usb and insert a new for installation purpose
2. Hold and press power+up+home button to boot into recovery
3. Format and reflash the new rom
Should works like a charm
Click to expand...
Click to collapse
Thanks for the feed back selferng, when I reboot into recovery, I cant select anything because the touch screen doesnt work
Demijinx said:
Thanks for the feed back selferng, when I reboot into recovery, I cant select anything because the touch screen doesnt work
Click to expand...
Click to collapse
Can u use the hardware button to select? Volume up and down and power button to select
selferng said:
Can u use the hardware button to select? Volume up and down and power button to select
Click to expand...
Click to collapse
Okay so I grabbed the lastest ODIN and was able to go back to the stock recovery. I performed a wipe/factory reset, but it still wont let me use the touch screen! ARG! It didnt clear the new kernel. Could it be because Im flashing to an older firmware? I cant find 5.1.1 anywhere...
Demijinx said:
Okay so I grabbed the lastest ODIN and was able to go back to the stock recovery. I performed a wipe/factory reset, but it still wont let me use the touch screen! ARG! It didnt clear the new kernel. Could it be because Im flashing to an older firmware? I cant find 5.1.1 anywhere...
Click to expand...
Click to collapse
Is the a Galaxy s6 or a S6 edge+ of edge+ you've been flashing the wrong firmwares, which would explain the issues you're having
Try a different cable or usb port or redownload the firmware file as it may be corrupted.
Press thanks if I helped.
You're on the wrong forum. This is for the Edge+. You have a S6. Not Edge, not +.
nms247 said:
Is the a Galaxy s6 or a S6 edge+ of edge+ you've been flashing the wrong firmwares, which would explain the issues you're having
Click to expand...
Click to collapse
Its the regular S6, not the edge. So the firmware is correct?
a. felon said:
Try a different cable or usb port or redownload the firmware file as it may be corrupted.
Press thanks if I helped.
Click to expand...
Click to collapse
I will trying downloading again. I have tried all my USB ports and the original cable and a brand new one.
B3311 said:
You're on the wrong forum. This is for the Edge+. You have a S6. Not Edge, not +.
Click to expand...
Click to collapse
Dang! Mods can we move this? Sorry guys.
Guys thanks for helping me out with this, all the responses are appreciated.
UPDATE! FIXED IT!
I tried a different root method
http://trueandroid.com/g920pvpu2bof...mware-sprint-galaxy-s6-sm-g920p-how-to-guide/
This worked the first time, and restored the touchscreen functions. Thank you everyone for your help.
Demijinx said:
Its the regular S6, not the edge. So the firmware is correct?
I will trying downloading again. I have tried all my USB ports and the original cable and a brand new one.
Dang! Mods can we move this? Sorry guys.
Guys thanks for helping me out with this, all the responses are appreciated.
Click to expand...
Click to collapse
Had to ask this being the edge+ forum
Sent from my SM-G928F using Tapatalk
Alright I spoke too soon. I got to my desktop once, now it just says:
Kernel Is not seadroin enforcing
Custom binary blocked by FRP lock.
Ugg. Lol I need help again.
Demijinx said:
Alright I spoke too soon. I got to my desktop once, now it just says:
Kernel Is not seadroin enforcing
Custom binary blocked by FRP lock.
Ugg. Lol I need help again.
Click to expand...
Click to collapse
Ok I know one thing for sure, you are not the first to face this but it seems to be solved by flashing the tar file for your device. More info here http://forum.xda-developers.com/sprint-galaxy-s6/help/custom-binary-blocked-frp-lock-t3152054
Good luck
Don't forget to Press that thanks button ?.
koop1955 said:
Minor correction. You can use the version that you started with or a later version. The only problems come if you try to use an earlier version, like going from 5.1.1 back to 5.0.2. Which won't work.
Here is the latest version available, should always work: https://www.androidfilehost.com/?fid=24269982087002159
Odin is available here: http://www.samsungodindownload.com/
Click to expand...
Click to collapse
koop1955 had the link. Koop, if you read this, hit me up with your paypal, I owe you some beer.
Demijinx said:
koop1955 had the link. Koop, if you read this, hit me up with your paypal, I owe you some beer.
Click to expand...
Click to collapse
Sorry, man, I won't accept it. I do this stuff for love and need to keep it pure.
But please Pay It Forward. Help somebody as you are able to.
koop1955 said:
Sorry, man, I won't accept it. I do this stuff for love and need to keep it pure.
But please Pay It Forward. Help somebody as you are able to.
Click to expand...
Click to collapse
Will do brother. Thank you so much, you really pulled me out of a spot. Im used to paying for everything in "Military Currency". Thank you again.

Categories

Resources