hello, im new to rooting and what not, i managed to figure out how too flash cm9 nightly , gamps, and kernal froyo, on my defy red lens and it starts up ics fine but i get no service, and my camera does not work... both vital to owning a phone.. if anyone can point me int he right direction would do my TONS thanks alot
p00lshark5 said:
hello, im new to rooting and what not, i managed to figure out how too flash cm9 nightly , gamps, and kernal froyo, on my defy red lens and it starts up ics fine but i get no service, and my camera does not work... both vital to owning a phone.. if anyone can point me int he right direction would do my TONS thanks alot
Click to expand...
Click to collapse
You should check all this topic before
http://forum.xda-developers.com/showthread.php?t=1353003
Your symptoms indicate a wrong kernel. Flash right kernel, next correct rom for defy red lens and gaaps, then wipe cache and dalvick cache.
Related
Hi
I did read in the dev section, that there is a new *.sbf from the Defy+ with Android 2.3.6. which can be flashed on the Defy. I know there is no going backl from that if flashing the full sbf.
As far as i know the Defy with red lens (bayer device) is basically a Defy+.
So what i wanna know...will the camera work with this new sbf...basically, will everything work?
Nope... I don't think the red lens camera is working fine as of now...
Btw... was wondering if we flash the nandroid of the 2.3.6 then can we return to frayo?
Sent from my MB525 using xda premium
hmmm. darn it... and here i was thinking the defy with red lens is quite the same as defy+. Obviously there are differences in the end.
So no experiments for me then...need the camera. hope it will start working at some point. Epsylon3 wrote, that with defy+ kernle some things are working easier and that they would probably jump to that kernel. But without Cam... :-(
Regarding the nandroid...sory..not sure if u can return..i think yes...but no guarantees ton that. U will have to read the thread in dev section from walther79
ace-drink said:
Hi
I did read in the dev section, that there is a new *.sbf from the Defy+ with Android 2.3.6. which can be flashed on the Defy. I know there is no going backl from that if flashing the full sbf.
As far as i know the Defy with red lens (bayer device) is basically a Defy+.
So what i wanna know...will the camera work with this new sbf...basically, will everything work?
Click to expand...
Click to collapse
Someone already flashed this full SBF on a Defy MB525, its working perfectly for him. As long as you have a Red lens, and dont care about downgrading, you can go for it
ah... two different opinions
From what i was reading in the meantime it wont work. At least thats what Walter79 wrote
Anyways...am on CM9 now and thats ok for now.. if i would use the newer Defy+ Kernel+Bootloader that wont work at the moment.
ace-drink said:
ah... two different opinions
From what i was reading in the meantime it wont work. At least thats what Walter79 wrote
Anyways...am on CM9 now and thats ok for now.. if i would use the newer Defy+ Kernel+Bootloader that wont work at the moment.
Click to expand...
Click to collapse
No... the ROM does work on Red lens Defy and Defy+, that's a fact.
What wont work is the Fixed SBF, cause it needs the new Firmware to work... which is only possible to have by flashing the full SBF.
Walter also said he is going to base the new MSGinger in this rom, and make it work on Green lens.
But the rom DOES work on Red Lens defy.
thx again... good to know for sure.... hoping that way the red lens defy will be compatible with any updates from moto for defy+
help me to
ok... managed to root the phone
installed 2nd init 1.4.2 for defy
but now when i try to install CM 7.2 RC gives me an error after the package is verified
it says it's not signed...
help
pss214 said:
ok... managed to root the phone
installed 2nd init 1.4.2 for defy
but now when i try to install CM 7.2 RC gives me an error after the package is verified
it says it's not signed...
help
Click to expand...
Click to collapse
I'm not really sure about the version numbers :/ Did you select "Latest" and not "Stable" recovery to be installed? You need "Latest"..!
Other than that... You are stuck on bl7 means that you are on 2.3.6, right? I think that official CM7.2 RC is a Froyo ROM. I could be wrong though. And even if it is, it still should flash it normally. (but you would end up being stuck at boot logo..!)
Anyway, Quarx's are the best Gingerbread builds (and latest) - http://quarx2k.ru/cm7-nightly-defy+/
P.S. You've posted in the wrong sub-forum
But the cammera will works (green lens Defy with BL7)? Also, I think he need to change that batt file? Where is it located and what's its name?
LeopardSurd said:
But the cammera will works (green lens Defy with BL7)? Also, I think he need to change that batt file? Where is it located and what's its name?
Click to expand...
Click to collapse
Oh, yeah, right, Quarx's Gingerbread builds are meant for an actual DEFY+ so you need the Defy battery fix (you can use the one provided by Auris for CM9, it's the same thing).
I have no idea about the SOC camera and BL7, though :-/ You can flash Froyo (CM7) kernel once you have CWM? Have no idea if it would work :S
the phone is rooted and i have 2nd init on it installed.... what now?
i want my camera and my battery back...
can i install CM 7 ?
The Development section is only for threads in which actual development is taking place
help please
can someone link me to a battery fix for the plus version of cm7.2 made by quarx? im currently using a red lense defy, and I CANT find the f*cking battery fix for red lense in cm7 really.. I only find for cm10 and cm9 battery fixes!
mariosanoguera said:
can someone link me to a battery fix for the plus version of cm7.2 made by quarx? im currently using a red lense defy, and I CANT find the f*cking battery fix for red lense in cm7 really.. I only find for cm10 and cm9 battery fixes!
Click to expand...
Click to collapse
have you tried the cm9 and cm 10 ones? I think they should work...
B4ast1 said:
have you tried the cm9 and cm 10 ones? I think they should work...
Click to expand...
Click to collapse
they released a new battery fix for cm10 because its located in another place or something?
I will try with cm9 battery fix since the cm10 doesnt work
mariosanoguera said:
I will try with cm9 battery fix since the cm10 doesnt work
Click to expand...
Click to collapse
Did this work?
And if so could I please ask your opinion? I also have a red lens defy. I am on Epsylon3's froyo kernel and using Quarx's CM10. I want to go back to CM7.2 and want to use Quarx's nightly that has 720p recording. Do I need to flash a GB kernel and use the defy+ build for 720p to work, or can I stay on the froyo kernel and use the defy build? The reason I want to stay on froyo kernel is that I don't want the battery issues.
I tried a CM7 Defy+ build on my Defy Red Lens, used a battery fix I got from the ParanoidAndroid dev forum and it kinda worked. I say kinda cuz when I try to reboot it actually powers off and cannot get on til a battery pull, but everything else is OK
m0ndul said:
I tried a CM7 Defy+ build on my Defy Red Lens, used a battery fix I got from the ParanoidAndroid dev forum and it kinda worked. I say kinda cuz when I try to reboot it actually powers off and cannot get on til a battery pull, but everything else is OK
Click to expand...
Click to collapse
Thanks did you have to flash a GB kernel, or did you stay on the froyo kernel?
I flashed the GB kernel, didn't tried the froyo kernel though, it normally bootloops with defy+ roms
Sent from My Moto Defy
I have a CM9 GB kernel on defy red lens, wanted to install CM7 Defy + as multiboot. But my Cm7 shows a '?' for the battery status icon. Tried Battery fix for 1500mah defy red lense also tried ICS red lense batt fix but no use.
Battery fix
This is battery fix for Defy+ (MB526)
Install via "flash .zip" in the recovery them restart your phone
If it don't work, it's that the kernel had changed so, re-install attached kernel also by "flash .zip" in recovery system, restart your phone and you will see the battery's percentage.
euros60 said:
This is battery fix for Defy+ (MB526)
Install via "flash .zip" in the recovery them restart your phone
If it don't work, it's that the kernel had changed so, re-install attached kernel also by "flash .zip" in recovery system, restart your phone and you will see the battery's percentage.
Click to expand...
Click to collapse
Tried it but still no battery status. Maybe i have a froyo sbf flashed earlier and then I installed MIUI/WIUI n then installed the CM9 GB with GB kernel. Anyways dont want to do a fixed sbf +nandroid now and redo everything will try to get a CM10 Gb working.
Everything for testing!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
I wrote this for maybe less confusion
Works with my Defy - red lense Bayer cam - on Defy+(gingerbread Kernel) Jelly Bean Quarx 24.8 Rom
I´ve
1. Flash test_2ndboot_6.10.zip from http://quarx2k.ru/ or my 2ndboot_06.10.zp from attached dropbox (search for 2ndInit recovery if you dont have and root your defy)
2. Boot into Recovery
3. Set 2ndboot as default
4. Go to tools/adb daemon and klick it and then reboot
If you want to go back to stock gb kernel flash stock kernel -like gb-234-451-134-signed.zip from dopbox i´ve attached
Remember everything is for Test the custom kernel
OT - Multiboot is ok with CM7 but akku is always 100%
https://www.dropbox.com/sh/4fg71wuehyibzzx/oanepGgaRR
BIGNOTE: Green lens users who flashed redlens builds please dont try using flash, you will end up burning it like me and many others
Big thanks to our great DEV´s Quarx as porter :good: , Walter for fixing :good: and MS2 Dev czechop who made this possibile :good:
Great works men !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!11
Hi, i tried all the methods without sucess... Alldays the same: blue led then red and stuck at moto logo. Any ideas?
Sorry for my english and thanks in advance
Redhotero said:
Hi, i tried all the methods without sucess... Alldays the same: blue led then red and stuck at moto logo. Any ideas?
Sorry for my english and thanks in advance
Click to expand...
Click to collapse
Defy or Defy+ ?
bone101 said:
Defy or Defy+ ?
Click to expand...
Click to collapse
Defy red lens with defy + build gb kernel
Sent from my MB526 using xda premium
I have done it in such manner
1. Prepared on SD card:
- CM10 ROM 24/09 for MB526,
- gapps for JB
- Qkernel 2ndboot_06.10.zip (with improved 2ndboot.ko)
2. Done factory reset and viped caches
3. Installed CM10 and gapps in normal manner
4. Flashed Qkernel
5. Went to bootmenu and choosed 2nd-boot (there was no chance to set it as default... i think, because phone immediately reboots)
And achieved "half success". All is working but with extremely lags... Was said so after first bootup system suppose to be laggy and needs to wait some time on sleep state with WiFi switched off. I was waiting whole night.
So now I want to know, if my procedure is right.
Nobody mentions gapps during instali of ROM - i suppose it's so trivial so nobody count it on...
Another problem - is there need of factory reset or cache wipe?
After installing Qkernel i went to boot menu to set 2nd-boot as default, but when i choose 2nd-boot phone reboots and I don't know what now with this setting up deafult 2nd-boot...
I am trying to fond any reason of system lagginess. Maybe something was done wrong. What's your opinion? To change ROM build? Or something else...
Redhotero said:
Defy red lens with defy + build gb kernel
Sent from my MB526 using xda premium
Click to expand...
Click to collapse
You can try it with the kernel from my drop box
I nerver wiped anything
For me it works as I've done
http://forum.xda-developers.com/showthread.php?t=1542956
bone101 said:
You can try it with the kernel from my drop box
Click to expand...
Click to collapse
Of course I can try, but does it make any difference? Well, will see...
So I'm supposed to flash your kernel "as is" without much deliberation over existing installation?
If you are on boot loader ver 7 i cant say that it would work
Some peoples in this
http://forum.xda-developers.com/showthread.php?p=32535395
Wrote about problems with custom kernel . Look around page 67 if your defy+ was stock bl7
I am using regular Defy with Bayer module and as first owner I am sure so there was not flashed any full sbf except once when I was forced to flash stock Froyo, so there is no case of BL7 I think...
So if I try can I flash this kernel over existing system or should I reflash ROM too?
bone101 said:
You can try it with the kernel from my drop box
Click to expand...
Click to collapse
Tried without success. Ill have to flash sbf rigth? Which do you recommend?
what are the advantages of using this kernel?
I don't know the advantage, for me it works as i do.
I started with stock cee European gingerbread which I've flashed after offical update comes out
New nightley from quarx cm10-2ndboot-nightly-defy(+)
Is out & works a bit faster
bone101 said:
I don't know the advantage, for me it works as i do.
I started with stock cee European gingerbread which I've flashed after offical update comes out
New nightley from quarx cm10-2ndboot-nightly-defy(+)
Is out & works a bit faster
Click to expand...
Click to collapse
Flashed new nightly and problems are gone
Redhotero said:
Flashed new nightly and problems are gone
Click to expand...
Click to collapse
thank to quarx
trurl3 said:
I am using regular Defy with Bayer module and as first owner I am sure so there was not flashed any full sbf except once when I was forced to flash stock Froyo, so there is no case of BL7 I think...
So if I try can I flash this kernel over existing system or should I reflash ROM too?
Click to expand...
Click to collapse
In General section http://forum.xda-developers.com/showthread.php?t=1909242&page=84
they talk about BL5 and BL6 is supportet by quarx not BL4 and BL 7
Some say it works on BL7
But better read there for your self.......beforr you flash anything and think about warrity/garantie
For every booting i had to umount and mount again the battery.
And no Deep-Sleep in about 12 hours
Anyone else with this problems?
---------- Post added at 09:37 AM ---------- Previous post was at 08:49 AM ----------
Now Deep-Sleep is ok. Dont know why .... But ... Quarx said in the xda-developer thread,
that with no usb-cable and with wifi disabled the defy should go 10-15 sec. in deep-sleep.
Before i have had usb-cable on or wifi enabled. Maybe that has been the reason.
After 3 hours 14 % battery drain ... not good ...
Quarx edited a new Rom today.
But after getting more and more slow reactions from the defy+ i flashed the 24.09 version.
All tips didn't really work in a good way.
And I need my defy+ functionabel this days.
But next time again ...
And today again a new kernel for update as *.zip ...
quarx2k.ru/cm10-2ndboot-nightly-defy(+)/update_for_11.10_v2.zip
13.10 Kernel update:fix wifi tether(reboot), reduce battery drain, compiled with linaro 4.5, fix charge only mode, cleanup unused drivers.
RED led blinks and it is in a bootloop when i upgrade my defy with CM10-20121128-NIGHTLY-mb526.zip ? can anyone give me the link for the CM10 Nightlys latest build for MB525 Green lens and the correct jellyx kernel for MB525 Green lens?
Reply
The one you are flashing is an old nightly.
You can find the latest CM10 here- http://quarx2k.ru/cm10-2ndboot-nightly-defy(+)/ or here-
http://www.uncledan.it/android-files/CM10/
jellyx here-
http://forum.xda-developers.com/showthread.php?t=2017329
wipe cache and dalvik.... You can upgrade without wiping data but that could cause problems
please use the search function next time
hotdog125 said:
The one you are flashing is an old nightly.
You can find the latest CM10 here- http://quarx2k.ru/cm10-2ndboot-nightly-defy(+)/ or here-
http://www.uncledan.it/android-files/CM10/
jellyx here-
http://forum.xda-developers.com/showthread.php?t=2017329
wipe cache and dalvik.... You can upgrade without wiping data but that could cause problems
please use the search function next time
Click to expand...
Click to collapse
Dude, i used the search function ...but i am confused which is the kernel for my defy green lens to download and if i upgrade it to .. i am not able to see any changes in kernel... and i think the nightly is present in the given link
don't flash the kernel, it's better without
pochopsp said:
don't flash the kernel, it's better without
Click to expand...
Click to collapse
between how to know if the kernel flashed was a success... because if i flash the kernel too... in my ABOUT PHONE it shows the kernel which came along with rom :cyclops: