A few people on here have said that I could install the leaked Jelly Bean build for the India P3100 Galaxy Tab onto my P3113. How do I do that? I tried upgrading from the stock p3113 LH2 firmware and it failed.
Did you first install the proper 3100 base file?
dictionary said:
Did you first install the proper 3100 base file?
Click to expand...
Click to collapse
No.
Will installing the P3100 base firmware through Odin onto my tablet hurt anything?
I flashed the P3100 base firmware onto my tablet and am now installing Jelly Bean onto my P3113.
I installed it successfully!
p3113owner said:
I installed it successfully!
Click to expand...
Click to collapse
does the IR work?
what about Wifi and BT?
ruben00 said:
does the IR work?
what about Wifi and BT?
Click to expand...
Click to collapse
No, sadly. I kept getting an error on my p3113 when flashing the base. Only at the very end, so probably modem related. I'll just wait it out for a p3113 release unless op wants to make a nandroid after a clean install
dictionary said:
No, sadly. I kept getting an error on my p3113 when flashing the base. Only at the very end, so probably modem related. I'll just wait it out for a p3113 release unless op wants to make a nandroid after a clean install
Click to expand...
Click to collapse
I got the error too. I was afraid my device was bricked, but it booted right up. Theonly issue with running the P3100 for me was that E-Mail wanted a 3g connection which the P3113 doesn't have. I did not test the IR, so I don't know. Wifi and bluetooth both work. Microphone doesn't work. The speakers do. I did not test the headphone jack, though.
Related
I got the tab 2 p5113 stock ICS 4.0.4 OTA zip, also have the Kies file both ready to use
Update from kies
Update from OTA on device
Both are the Android ICS 4.0.4 Update Stock ROM
??
I would say your teasing me, stuck in boot already. CWM ready for flash.
Wildcat2083 said:
I got the tab 2 p5113 stock ICS 4.0.4 OTA zip, also have the Kies file will upload that later
Dropbox link comming soon
Click to expand...
Click to collapse
Gorbesh said:
I would say your teasing me, stuck in boot already. CWM ready for flash.
Click to expand...
Click to collapse
Your update is now posted, the kies update is being uploaded next
Hi,
Sorry about the silly Q. but, how can we use this 'kies' files to get tab updated?!
michael_zz said:
Hi,
Sorry about the silly Q. but, how can we use this 'kies' files to get tab updated?!
Click to expand...
Click to collapse
Im pretty sure you have to use ODIN to flash the update labeled kies, there used to be a way to force kies to use the downloaded firmware however kies has been updated so it may not work, id suggest google or looking around on XDA for a bit more help
Has anyone done this successfully with odin? Thanks
Kevhed said:
Has anyone done this successfully with odin? Thanks
Click to expand...
Click to collapse
If they have no one has reported it, however their is another thread with a p5113 rom multi language in the same tar.md5 format and its flashed with ODIN so its safe to the best of my knowledge, i can test it later and let u guys know
Wildcat2083 said:
I got the tab 2 p5113 stock ICS 4.0.4 OTA zip, also have the Kies file both ready to use
Update from kies
Update from OTA on device
Both are the Android ICS 4.0.4 Update Stock ROM
Click to expand...
Click to collapse
Thanks for the files, the Kies one is 1 GB and the OTA is 200 MB, dumb question as I just woke up but what's the difference between both? I have a stock P5113 I'm thinking of simply rooting and I would like a stock rom to flash back to the state it was in out of the box, which of the 2 files do I want and what are the differences, thanks and sorry if it's a silly question.
PS: is this the P5113UEBLG5 version from july? I'd assume so according to the date of the post I'm actually in need of P5113UEBLH3
Philminator said:
Thanks for the files, the Kies one is 1 GB and the OTA is 200 MB, dumb question as I just woke up but what's the difference between both? I have a stock P5113 I'm thinking of simply rooting and I would like a stock rom to flash back to the state it was in out of the box, which of the 2 files do I want and what are the differences, thanks and sorry if it's a silly question.
PS: is this the P5113UEBLG5 version from july? I'd assume so according to the date of the post I'm actually in need of P5113UEBLH3
Click to expand...
Click to collapse
One is compressed into a ZIP file and the other is the full MD5 file.
help
Hi there,
The download links don't work anymore. Any chance OP has the file?
I realize this is quite an old thread, but I'm trying to give life to an old tablet, and this seems to be my last hope. I've tried almost every kernel and rom I can find. I got one ICS to work, but then WiFi wasn't working... And no one had a solution. Then I found an JB combo that I got to work, but it was just too slow. So that's why I wanted to stick with ICS.
If anyone has the files, it would be greatly appreciated if you can post a download link.
Thanks!
First JB OTA to P3113 right?
Carrier/Country: XAR
Version: 4.1.1 - Jelly Bean
New PDA: P3113XARCLI
Needed PDA: P3113UEBLH2
Download
Size: 327.9 MB
To Flash this you need to have stock P3113UEBLH2 firmware. This is important since the OTA makes a check before flashing.
First Jelly Bean OTA for GT-P3100 in India (INU)
Country: India (INU)
Date: 8 Sep 2012
Version: 4.1.1 (Jelly Bean)
Needen PDA: P3100DDBLH3
To PDA: P3100DDBLI1
Size: 295.2 MB
Download
Enjoy!
To Flash this you need to have stock P3100DDBLH3 firmware. This is important since the OTA makes a check before flashing.
Flash through recovery as a zip-file.
I do not have this device myself, hence it is still untested. If there is a brave soul out there that test it and can give flashing instruction, please PM me and I will update the first post!
For the future, all OTA for this model can be found here
Thanks to SamMobile.com!
More info here
Now that's a nice surprise...
Sent from my GT-P3100 using xda premium
LuffarJoh said:
First Jelly Bean OTA for GT-P3100 in India (INU)
Country: India (INU)
Date: 8 Sep 2012
Version: 4.1.1 (Jelly Bean)
Needen PDA: P3100DDBLH3
To PDA: P3100DDBLI1
Size: 295.2 MB
Download
To Flash this you need to have stock P3100DDBLH3 firmware. This is important since the OTA makes a check before flashing.
Flash through recovery as a zip-file.
I do not have this device myself, hence it is still untested. If there is a brave soul out there that test it and can give flashing instruction, please PM me and I will update the first post!
For the future, all OTA for this model can be found here
Thanks to SamMobile.com!
More info here
Click to expand...
Click to collapse
finally we gotta experience it!!!buddy thanx for info.i am so exited about jelly bean on my tab...
This means they are going to update the Galaxy Tab 2 7.0 to Jellybean! Hopefully, they will leak the P3113 version soon. I will flash it immediately when it is leaked for my tablet.
p3113owner said:
This means they are going to update the Galaxy Tab 2 7.0 to Jellybean! Hopefully, they will leak the P3113 version soon. I will flash it immediately when it is leaked for my tablet.
Click to expand...
Click to collapse
You can flash a 3100 on a 3113 no problems , just when you do it the other way round you have issues.
Sean_Seany said:
You can flash a 3100 on a 3113 no problems , just when you do it the other way round you have issues.
Click to expand...
Click to collapse
I decided to try the update on my P3113 and it failed to install.
Same here I tried to flash the zip via CWM and no lucky yet. I will keep reading and trying.
shinydesert said:
Same here I tried to flash the zip via CWM and no lucky yet. I will keep reading and trying.
Click to expand...
Click to collapse
You have to be on stock recovery and stock firmware for it to work. This is a stock OTA update, so it will need a previous stock firmware installed for it to work.
Disregard please.
Hey guys,
could somebody extract theSecLauncher2.apk from system/apps and libdrawglfunction.so from system/lib ? We'd really apreciate it becuase we need it for porting to other devices. It would safe us a lot of time.
I am downloading now we report back
Sent from my One X using Tapatalk 2
madphone said:
Hey guys,
could somebody extract theSecLauncher2.apk from system/apps and libdrawglfunction.so from system/lib ? We'd really apreciate it becuase we need it for porting to other devices. It would safe us a lot of time.
Click to expand...
Click to collapse
Sorry,I was trying but since I updated my device has no root access,you might want download the ota and get it from there.
Any idea when its releasing officially???
shinydesert said:
Sorry,I was trying but since I updated my device has no root access,you might want download the ota and get it from there.
Click to expand...
Click to collapse
I checked the ota zip files but was unable to find those files mentioned.
I did too, and could not see them either,now that I installed CWM and rooted it aome apps are saying that is not rooted, I see the files you need, but I can't copy/move/send them.
Sorry,I will keepp trying.
madphone said:
Hey guys,
could somebody extract theSecLauncher2.apk from system/apps and libdrawglfunction.so from system/lib ? We'd really apreciate it becuase we need it for porting to other devices. It would safe us a lot of time.
Click to expand...
Click to collapse
I got'em!!
Is it possible to install this update onto 3110?
shinydesert said:
I got'em!!
Click to expand...
Click to collapse
yeah, big thanks! i have only forgotten one thing, stupid me: twframework-res.apk
without it i can't decompile.
There you go.
geekdadof3 said:
I am downloading now we report back
Sent from my One X using Tapatalk 2
Click to expand...
Click to collapse
I downloaded the OTA and firmware and updated my 3113. JB works great! Noticeably smoother than ICS, although not perfect. all the usual bloatware is present. Google Now works flawlessly.
Only hiccup for now is the lack of homescreen rotation. I can probably get over that for now.
20MB OTA update for DXLP7, kernel dated oct 31. might be just bug fixes .... biggest plus is that root from dxlp7 was retained.
darthvidor said:
20MB OTA update for DXLP7, kernel dated oct 31. might be just bug fixes .... biggest plus is that root from dxlp7 was retained.
Click to expand...
Click to collapse
nice bro! downloading Malaysia 112012 4.0.4 from Samfirmware since there are no generic firmware for Philippines [all are carrier specific]
i am using Paranoid android 2.50 but i still prefer to use stock firmware
Tried to install update but during boot my Cwm recovery showed e: invalid ***forgot***. I'm rooted with custom kernel. How can I update my current LP7?
Stock rom
Sent from my 32in Galaxy Tab
kencad said:
Tried to install update but during boot my Cwm recovery showed e: invalid ***forgot***. I'm rooted with custom kernel. How can I update my current LP7?
Stock rom
Sent from my 32in Galaxy Tab
Click to expand...
Click to collapse
you cannot flash stock firmware using CWM..
download stock fw from samfirmware.com, copy it to your sdcard, and use mobile odin pro to update...
you may also do that on your pc via Odin.exe
JAYZE said:
nice bro! downloading Malaysia 112012 4.0.4 from Samfirmware since there are no generic firmware for Philippines [all are carrier specific]
i am using Paranoid android 2.50 but i still prefer to use stock firmware
Click to expand...
Click to collapse
sammobile lists xtc as Sun but xtc is the generic firmware found in the samsung stores
Can someone tell this as the Wifi on P6800DXLP8? Fix the problem of drop? Or continues at the same bug?
hongkong is not included in the list of countries for the latest update..i believe that hk fw is the one with wifi problem only
never had any issues regarding that, i just make sure to have a full flash and clear data with cwm
you could download other fw like malaysia because philippines is included if you click Info
i don't use firmwares with included carrier because they contain unnecessary apps
Ricardoobom said:
Can someone tell this as the Wifi on P6800DXLP8? Fix the problem of drop? Or continues at the same bug?
Click to expand...
Click to collapse
My tab is on DXLP8 now,before update my wifi is showing not in range but after update via kies my tab can connect to wifi easily.no more wifi not in range or wifi drop.so far wifi is pretty stable
JAYZE said:
you cannot flash stock firmware using CWM..
download stock fw from samfirmware.com, copy it to your sdcard, and use mobile odin pro to update...
you may also do that on your pc via Odin.exe
Click to expand...
Click to collapse
Yep, after failing, I decided to just dl the fw from Sam firmware and push it via pc Odin. Seems to have better performance than the dlp7
Sent from my 32in Galaxy Tab
Ricardoobom said:
Can someone tell this as the Wifi on P6800DXLP8? Fix the problem of drop? Or continues at the same bug?
Click to expand...
Click to collapse
Yes, this rom fixes the ics wifi bug !
Any other changes in the rom? If the only change is fixed wifi, then it's better for me to stay on current rom.
GalaxyNote_4.1.2_I9220_ZCLSD_Mvhla_8.91..by MVHLA
with installer "aroma" in Chinese language
Copy the zip File to sdcard(Internal Or external),
Restart in CWM recovery,
Link to download.
http://pan.baidu.com/share/link?shareid=281266&uk=4094249853
reserved
Best regards,:good:
best regards,
Did you put them together yourself?
Everything working? PlayStore and all smooth?
Chinese English and Korean only as language available right?
You added some tweaks yourself?
Clear weather/clock widget, blue battery and all apps on the multi task bar thinggy.? more details maybe...?
I'll give it a go when I get my Note from insurance.
Thanks for the upload.
Why in general section?
_______________
Via GT-n7OOO using xda app-lite
Because I dont think there will be any development on this.
BTW Those pics look great
This rom was made by Mvhla who is a chinese rom maker. This rom was first released at 52samsung.com. The newest version is 8.91
This rom has multi-windows cracked/playstore added/3 languages only.
This rom has an issue that changing battery might lead to bootloop. Powering off the note correctly and waiting a minute before replacing the battery everytime would solve this issue.
The intallation is in chinese.
BTW, Hongkong has a new leak.
songear said:
This rom was made by Mvhla who is a chinese rom maker. This rom was first released at 52samsung.com. The newest version is 8.91
This rom has multi-windows cracked/playstore added/3 languages only.
This rom has an issue that changing battery might lead to brick. Powering off the note correctly and waiting a minute before replacing the battery would solve this issue.
The intallation is in chinese.
BTW, Hongkong has a new leak.
Click to expand...
Click to collapse
If that's the case, the caution about bricking the phone should be in the first post.
OP, could you please add that cautionary note in the first post?
Criskelo 4.04 ICS LRK v11.2, LRK Modem, speedmod k3-15 kernel, Carrier: AT&T (US)
This rom works perfectly, I've been using it since yesterday, all ok.
incisivekeith said:
If that's the case, the caution about bricking the phone should be in the first post.
OP, could you please add that cautionary note in the first post?
Criskelo 4.04 ICS LRK v11.2, LRK Modem, speedmod k3-15 kernel, Carrier: AT&T (US)
Click to expand...
Click to collapse
sorry, I am not the thread poster.
I just post the caution.
is just bootloop n not brick！！！
do a factory reset or restore backup will do just like all the xxlsc there's no differents ！！！
noobs can just get away from jelly bean leak n it will keep u safe ！
alvinhaw said:
is just bootloop n not brick！！！
do a factory reset or restore backup will do just like all the xxlsc there's no differents ！！！
noobs can just get away from jelly bean leak n it will keep u safe ！
Click to expand...
Click to collapse
Yes, that's bootloop,sorry for my poor expression.:silly:
alvinhaw said:
is just bootloop n not brick！！！
do a factory reset or restore backup will do just like all the xxlsc there's no differents ！！！
noobs can just get away from jelly bean leak n it will keep u safe ！
Click to expand...
Click to collapse
Or just be patient and wait -- when this happened to me on XXLSC, it eventually booted up just fine.
here comes the official jelly bean 4.1.2 zslm5 baseband xxlso http://pan.baidu.com/share/link?shareid=265357&uk=2013594505
caution zslm5 still no root ！flash at ur own risk using odin.
hopefully this is a nice rom without bootloop.
alvinhaw said:
here comes the official jelly bean 4.1.2 zslm5 baseband xxlso http://pan.baidu.com/share/link?shareid=265357&uk=2013594505
caution zslm5 still no root ！flash at ur own risk using odin.
hopefully this is a nice rom without bootloop.
Click to expand...
Click to collapse
You need a password to unzip the file, did you know?, Thanks.
bbs.52samsung.com "password"
moisesfco said:
bbs.52samsung.com "password"
Click to expand...
Click to collapse
sorry for that…
下载http://pan.baidu.com/share/link?shareid=265357&uk=2013594505
unzip password： bbs.52samsung.com
alvinhaw said:
here comes the official jelly bean 4.1.2 zslm5 baseband xxlso http://pan.baidu.com/share/link?shareid=265357&uk=2013594505
caution zslm5 still no root ！flash at ur own risk using odin.
hopefully this is a nice rom without bootloop.
Click to expand...
Click to collapse
Official or leak? And,can we use mobile Odin for flashing this rom?
Sent from my GT-N7000 using Tapatalk 2
zviki said:
Official or leak? And,can we use mobile Odin for flashing this rom?
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
new "leak", but updated
http://forum.xda-developers.com/showthread.php?t=2143594
N700ZSML5
With this new rom rooting are lost, Philz patches do not work and neither did the "exploit" have corrected the problems of the Exynos, surely there replace the package "code tar.md5 ......." (odin) the "boot.bin" rooting able to use this rom., I'm back to rooting for xxlsa again.
Best regards,
i have a galaxy note 10.1 and can only put 4.1.2 roms on it. i want to use kitkat but it failes all the time please can someone help me.sorry if its not in the right place
I have a car that make a ping pong ping noise, can someone help me??? :highfive:
1. READ..
2. Put the question in the Questions and Answers section of the forum
3. Be specific.. What model number, what have you tried to do, in order to reach desired outcome..
:victory:
I have a fix for your car issues
z31k said:
I have a car that make a ping pong ping noise, can someone help me??? :highfive:
1. READ..
2. Put the question in the Questions and Answers section of the forum
3. Be specific.. What model number, what have you tried to do, in order to reach desired outcome..
:victory:
Click to expand...
Click to collapse
Sounds like your car needs to be Flashed With VERSION 3.4r3456986753.. And Then Rooted with car-root.strt then install app called. FREE Junk car two away.
Good Luck:good:
erica_renee said:
Sounds like your car needs to be Flashed With VERSION 3.4r3456986753.. And Then Rooted with car-root.strt then install app called. FREE Junk car two away.
Good Luck:good:
Click to expand...
Click to collapse
Wait... I flashed 3.4r356986752 last night... Chainfire hasn't posted a commit to the junk car github..
jasonfreeborn said:
i have a galaxy note 10.1 and can only put 4.1.2 roms on it. i want to use kitkat but it failes all the time please can someone help me.sorry if its not in the right place
Click to expand...
Click to collapse
I have the same situation as yours with my N8000.Where did you bought your tablet? I have one bought in China(original), I can only install one made for China version(same as those 16gb bought in Hongkong), every other firmware always got error when installing via odin.But I can install custom 4.4.2 custom roms.
filchi756 said:
I have the same situation as yours with my N8000.Where did you bought your tablet? I have one bought in China(original), I can only install one made for China version(same as those 16gb bought in Hongkong), every other firmware always got error when installing via odin.But I can install custom 4.4.2 custom roms.
Click to expand...
Click to collapse
i have a note 10.1 n8010 16gb all it will take is 4.1.2 i want 4.4
its rooted with recovery
jasonfreeborn said:
i have a note 10.1 n8010 16gb all it will take is 4.1.2 i want 4.4
its rooted with recovery
Click to expand...
Click to collapse
Where did you bought your tablet? Is it Hongkong?
filchi756 said:
Where did you bought your tablet? Is it Hongkong?
Click to expand...
Click to collapse
hi i got it from a friend
jasonfreeborn said:
hi i got it from a friend
Click to expand...
Click to collapse
Can you check your firmware? What is it?
filchi756 said:
Can you check your firmware? What is it?
Click to expand...
Click to collapse
hi model gt-n8010
android 4.1.2
build tundra rom v.2.0
jasonfreeborn said:
hi model gt-n8010
android 4.1.2
build tundra rom v.2.0
Click to expand...
Click to collapse
Since you are already on a custom recovery and ROM, rooted I assume. I would download this app, and flash the latest Philz Recovery, CWM, or TWRP with it. Then you should have no problem flashing a KitKat ROM. https://play.google.com/store/apps/details?id=de.mkrtchyan.recoverytools&hl=en
How did you tried to install KitKat? Kies? Custom recovery? On tyhe tablet itself?
Sent from my GT-N8000 using XDA Free mobile app