Related
I have tried at least 10 times with no results. I power down the device, hold both volume buttons and the power button, and nothing. I do get a vibrate after about 2 seconds, but nothing on the screen and then it vibrates every 6-7 seconds until I let go of the buttons. Kind of disappointed as I was all nice and comfortable on the couch, ready to use the Nexus 10 toolkit to do the all-in-one.
Anyone else experience this problem?
Sent from my SCH-I535 using Tapatalk HD
jmcharles said:
I have tried at least 10 times with no results. I power down the device, hold both volume buttons and the power button, and nothing. I do get a vibrate after about 2 seconds, but nothing on the screen and then it vibrates every 6-7 seconds until I let go of the buttons. Kind of disappointed as I was all nice and comfortable on the couch, ready to use the Nexus 10 toolkit to do the all-in-one.
Click to expand...
Click to collapse
Try releasing then power button (but hold the other two) when you feel the first vibration. I've found that holding the power button can make a continuous reboot happen.
Sent from my Galaxy Nexus using Tapatalk 2
Tried that, but no luck. I also went a different route and tried to do it using mskip's toolkit in original android development. After installing the drivers and choosing the options to boot into fastboot, the device vibrated once and nothing showed up on the screen. BUT...when I refreshed the main menu the toolkit recognized the device as in fastboot mode. Really weird happenings with this, and starting to be concerned that my device has some issues. What point is a Google device if I can't unlock or root it?!
Sent from my SCH-I535
I've had the best luck holding the vol up/down button down first, then while that's down, pressing and holding power until the fastboot menu comes up.
Well, I am at a complete loss. Is this cause for replacement?
Sent from my Nexus 10 using Tapatalk HD
Hold all three buttons at the same time and wait for the vibration and release. It should work.
Sent from my DROID RAZR HD using xda premium
Ok, so, I'm not sure what to make of the recent events. Bottom line, I was booting to fastboot mode, but the screen was just blank. I followed the instructions via the toolkit just by selecting the buttons and hoping it was making the correct selections in fastboot mode. Now unlocked, rooted, and a happy man! Still not sure why the fastboot menu would not show up though.
Sent from my SCH-I535 using Tapatalk HD
jmcharles said:
Ok, so, I'm not sure what to make of the recent events. Bottom line, I was booting to fastboot mode, but the screen was just blank. I followed the instructions via the toolkit just by selecting the buttons and hoping it was making the correct selections in fastboot mode. Now unlocked, rooted, and a happy man! Still not sure why the fastboot menu would not show up though.
Sent from my SCH-I535 using Tapatalk HD
Click to expand...
Click to collapse
I cant get the toolkit to recognize my tablet in fastboot mode. Is there a soluton to the black screen?
If the toolkit does not recognize the device in fastboot, then there's a good chance you didn't install the drivers correctly. Did you follow the directions correctly to get the toolkit to recognize the device?
Sent from my SCH-I535
jmcharles said:
If the toolkit does not recognize the device in fastboot, then there's a good chance you didn't install the drivers correctly. Did you follow the directions correctly to get the toolkit to recognize the device?
Sent from my SCH-I535
Click to expand...
Click to collapse
I got my device unlocked and the device did install the drivers. However, the problem was not that. But here's the thing, my N10 never showed me the fastboot menu. But connected to the PC it does show its connected. I never saw the screen that confirms "do you want to unlock the bootleader" (it goes completely black and vibrates every 5 seconds).
Workaround to unlock: For anyone with this problem, I just had to "guess" that menu (I think its clicking the vol button down once and then the power button). For me it bootlooped. so I pressed the Vol+ and power and in fastboot I booted to stock recovery, from there just wipe factory settings, and voila.
Weird tho that my fastboot screen was completely black
El Niche said:
I got my device unlocked and the device did install the drivers. However, the problem was not that. But here's the thing, my N10 never showed me the fastboot menu. But connected to the PC it does show its connected. I never saw the screen that confirms "do you want to unlock the bootleader" (it goes completely black and vibrates every 5 seconds).
Workaround to unlock: For anyone with this problem, I just had to "guess" that menu (I think its clicking the vol button down once and then the power button). For me it bootlooped. so I pressed the Vol+ and power and in fastboot I booted to stock recovery, from there just wipe factory settings, and voila.
Weird tho that my fastboot screen was completely black
Click to expand...
Click to collapse
This is exactly how I had to do it. It's a 50/50 shot, since I think the options are yes or no. Apparently the problem is a little more common, as evidenced by this thread I started in Android General, http://forum.xda-developers.com/showthread.php?t=2018777
Sent from my Nexus 10 using Tapatalk HD
I am stuck at the flashing X....with the toolkit. Kinda at a lose right now.
mike02vr6 said:
I am stuck at the flashing X....with the toolkit. Kinda at a lose right now.
Click to expand...
Click to collapse
Reboot into boot loader, choose recovery, press all three buttons at top at same time if you don't have options to select, then factory reset. This will solve your boot loop.
Sent from my SCH-I605 using Tapatalk 2
The post above is correct. Same thing happened to me. Just factory reset and you should be good to go
Sent from my Nexus 10 using xda app-developers app
I accidentally,... . unknowingly wiped the RED "system" button in Safestrap 3.12 on my Droid RAZR M today. (I was suppose to be wiping the cash and dalvik, but missed) I'm a retard I know. :crying:
Now I cant get into AP Fastboot to restore the phone from this hard brick!
When I press the power button along with the volume buttons, the only thing that happens is the red Motorola 'M" appears for a few seconds then the safe strap screen appears with the little sad robot, but that's it no AP Fastboot. Pressing the on screen buttons to enter Safestrap Recover do not respond. Oh boy I'm afraid I really did it this time. Its on the charger but i don't know if its even charging with out as OS?
Battery power was at 60% before i bricked it (i think). RSD Lite or my PC for that matter don't even see the phone when its plugged in.
Can this be saved? Or do I need to take a trip down to the Verizon Wireless store?
Droid RAZR M
4.1.2 OTA
Rooted
Locked Bootloader
Safestrap 3.12
Partitioned 64GB SD card utilizing Linked2SD
You need a different key combo to get into fastboot. You're not permabricked tho - that's just a really bad softbrick
Sent from my XT907 using Tapatalk 2
sloosecannon said:
You need a different key combo to get into fastboot. You're not permabricked tho - that's just a really bad softbrick
Sent from my XT907 using Tapatalk 2
Click to expand...
Click to collapse
Really? Well I hope your right. It gives me some hope. lol So do you have any idea of what alternative key combo i might have to use? Thank you for the reply.
Try holding power & volume down until the screen flickers then hold power and both volume buttons. You gotta be quick
If your boot loader is locked you won't be able to fast boot back until the new fast boot files come out though if your on 4.1.2
http://forum.xda-developers.com/showthread.php?t=2207419&page=2
go to the last page new tools and utilities up from matt and it works just unbricked me be sure to thank him :good:
sloosecannon said:
You need a different key combo to get into fastboot. You're not permabricked tho - that's just a really bad softbrick
Sent from my XT907 using Tapatalk 2
Click to expand...
Click to collapse
Thank you! You were right! was able to get into AP Fastboot with a different button combo like u said. :victory:
shane1 said:
Try holding power & volume down until the screen flickers then hold power and both volume buttons. You gotta be quick
If your boot loader is locked you won't be able to fast boot back until the new fast boot files come out though if your on 4.1.2
Click to expand...
Click to collapse
Shane you were right on the money brother!!! Thank you so very much. It worked perfectly. I'm up and running again.
much respect
bigrob1015 said:
http://forum.xda-developers.com/showthread.php?t=2207419&page=2
go to the last page new tools and utilities up from matt and it works just unbricked me be sure to thank him :good:
Click to expand...
Click to collapse
It worked! I utilized the NEWER version of Mat's utility and it did it!!! Woo Hoo!! Thank you so very much. Thank you all for all the speedy help.
SARM1084 said:
Shane you were right on the money brother!!! Thank you so very much. It worked perfectly. I'm up and running again.
much respect
Click to expand...
Click to collapse
hey no prob! i try to help as much as i can !
bigrob1015 said:
http://forum.xda-developers.com/showthread.php?t=2207419&page=2
go to the last page new tools and utilities up from matt and it works just unbricked me be sure to thank him :good:
Click to expand...
Click to collapse
New to this, i accidentally the whole phone, same problem im in AP fastboot but registers as Device Locked
run through it on windows OS but says 'Fastboot" is not recognized as an internal or external command" and doesnt reboot as said
this process took 1min
Halp
This thread saved my life, then killed me. The suggestion about the different keys was spot on, i got into fast boot mode, then ran that utility. It totally failed me, I must have killed my phone pretty dead, and now there are no more key combos (the suggested one worked at first but now its just making the screen go blank) to try to get back into fast boot to try again. any more suggestions? on the up side verizon just pushed that update so i figure i can blame that to attempt an exchange
Did you take the update before using that utility? If you did, which version did you use? If you were already updated, then you needed to run 1.20. If you ran the wrong utility, that will cause issues. Now, since you can't boot, it sounds like your battery is dead. When you get to the blank screen, plug it in and leave it to charge for a while.
I'm no expert by any means but I'll try to help as best i can. If not me I'm confident someone else will. Now, I apologize because I didn't understand your original post.
Could you elaborate a little more please?
1. What were you trying to do with your phone prior to things going wrong, if they went wrong at all.
2. you mentioned AP Fastboot. So IM going to assume that at least you can access it. (not the same problem that I was having) that's a good thing! lol
3. Are you utilizing a utility like the one by Matt? Or are you doing something else? Like flashing firmware etc.
4. What were you in Fastboot for? What were your intentions?
I hope this doesn't come over a condescending. Just trying to get a Clearer understand of your issue so we can help.
Sent from my XT907 using xda app-developers app
Sorry double post
PartyOnINSANE said:
New to this, i accidentally the whole phone, same problem im in AP fastboot but registers as Device Locked
run through it on windows OS but says 'Fastboot" is not recognized as an internal or external command" and doesnt reboot as said
this process took 1min
Click to expand...
Click to collapse
Look at my previous post
Sent from my XT907 using xda app-developers app
Sorry, my post musnt have updated. As you can see I managed to fix my problem. If there's any issues in the future for anyone I will be sure to advise as best I can.
Sent from my XT907 using xda app-developers app
PartyOnINSANE said:
Sorry, my post musnt have updated. As you can see I managed to fix my problem. If there's any issues in the future for anyone I will be sure to advise as best I can.
Sent from my XT907 using xda app-developers app
Click to expand...
Click to collapse
No problems brother. Glad to see your up and running.
Sent from my XT907 using xda app-developers app
Stuck in a Boot Loop
PartyOnINSANE said:
New to this, i accidentally the whole phone, same problem im in AP fastboot but registers as Device Locked
run through it on windows OS but says 'Fastboot" is not recognized as an internal or external command" and doesnt reboot as said
this process took 1min
Click to expand...
Click to collapse
Could you help me please?
I changed 2 lines in my build.prop file so i could see if I could get touchless control.
After I changed it, I restarted my phone. Now it is stuck in the Red M Boot, and it stays there, dosent black screen, dosent boot. I can get to the boot selection menu, but i cant choose anything, they all end up at the Red M. I Read that I can fix it in AP Fastboot, but I can get there. Also if i force it off (with power button and volume button) It just goes back to the Red M.
Everything I do ends up at the Red M
Help fast please, its my only phone, and I just got rid of my house phone
I have a
Droid Razr M
Rooted, no custom Roms or Recovery.
Changed my build.prop from XT907 to XT1087
Changed My Boot Animation to R2D2
A: 4.1.2
8gb Sd card on it.
gjhkl said:
Could you help me please?
I changed 2 lines in my build.prop file so i could see if I could get touchless control.
After I changed it, I restarted my phone. Now it is stuck in the Red M Boot, and it stays there, dosent black screen, dosent boot. I can get to the boot selection menu, but i cant choose anything, they all end up at the Red M. I Read that I can fix it in AP Fastboot, but I can get there. Also if i force it off (with power button and volume button) It just goes back to the Red M.
Everything I do ends up at the Red M
Help fast please, its my only phone, and I just got rid of my house phone
I have a
Droid Razr M
Rooted, no custom Roms or Recovery.
Changed my build.prop from XT907 to XT1087
Changed My Boot Animation to R2D2
A: 4.1.2
8gb Sd card on it.
Click to expand...
Click to collapse
Holding the combination of buttons will only cause it to reboot, every time. Holding the power button down will make it shutdown. With that being said, what was your battery like before you started all of this? If it's below 50%, you're going to have a hard time. Shut the phone down and charge the battery ovenight, prior to attempting to fastboot.
If your battery is good, then you can fastboot. Hold all three buttons down, until you get the phone to power off. As soon as power goes off, you'll see a quick line flash at the top of the screen. As soon as you see this flash, quickly let go of the power button and then re-press it. If you got it right, you'll go into the fastboot menu. If you got it wrong, it will attempt to reboot. If it reboots, just try the button combo again. Once you get into the fastboot menu, use the vol- key to get to the option you need, and then hit the vol+ to choose that option.
RikRong said:
Holding the combination of buttons will only cause it to reboot, every time. Holding the power button down will make it shutdown. With that being said, what was your battery like before you started all of this? If it's below 50%, you're going to have a hard time. Shut the phone down and charge the battery ovenight, prior to attempting to fastboot.
If your battery is good, then you can fastboot. Hold all three buttons down, until you get the phone to power off. As soon as power goes off, you'll see a quick line flash at the top of the screen. As soon as you see this flash, quickly let go of the power button and then re-press it. If you got it right, you'll go into the fastboot menu. If you got it wrong, it will attempt to reboot. If it reboots, just try the button combo again. Once you get into the fastboot menu, use the vol- key to get to the option you need, and then hit the vol+ to choose that option.
Click to expand...
Click to collapse
I have done your steps and I get the menu up, but when I try to scroll down with the volume down button, it doesn't move. It just stays on "normal powerup". How can I fix this?
I have a Google nexus 7 and i wanna root this. I use fedora 18 and universal nexus Linux toolkit V2.1.2 to do this. when nexus go to recovery mode, show and sleep android logo and a danger sign on his stomach and said, "no command" what can I do? please help
sorry for my bad english
KhoC said:
I have a Google nexus 7 and i wanna root this. I use fedora 18 and universal nexus Linux toolkit V2.1.2 to do this. when nexus go to recovery mode, show and sleep android logo and a danger sign on his stomach and said, "no command" what can I do? please help
sorry for my bad english
Click to expand...
Click to collapse
I guess you don't need to boot into recovery to root, you simply need to boot into bootloader
If there's the "no command" message, press power and volume up (or down?) to bypass that
Sent from my SK17i running stock ics (.587)
mihahn said:
I guess you don't need to boot into recovery to root, you simply need to boot into bootloader
If there's the "no command" message, press power and volume up (or down?) to bypass that
Sent from my SK17i running stock ics (.587)
Click to expand...
Click to collapse
I can`t bypass that. I don`t know why but when I press power and volume up, technically I reboot device. which part I do wrong?
I wanna root my nexus with Universal Nexus Linux Toolkit and it says I can root my nexus without unlock bootloader. so I can use warranty.
I`m very sorry for my bad english
I guess it's impossible to root without unlocking bootloader... But it could be I'm wrong
Sent from my SK17i running stock ics (.587)
I have same problem with myt Nexus 7 except that mine is rooted (with Nexus 7 Toolkit v1.5). Recovery mode has the dreaded "No Command" message and no combination of button presses will take it past that screen - except into normal reboot.
I've got the same no command message and no combination of buttons with the power & volume rocker will get me out of it. looking for suggestions.
KhoC said:
I can`t bypass that. I don`t know why but when I press power and volume up, technically I reboot device. which part I do wrong?
I wanna root my nexus with Universal Nexus Linux Toolkit and it says I can root my nexus without unlock bootloader. so I can use warranty.
I`m very sorry for my bad english
Click to expand...
Click to collapse
mihahn said:
I guess it's impossible to root without unlocking bootloader... But it could be I'm wrong
Sent from my SK17i running stock ics (.587)
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2233852
Motochopper exploit has been out and about for a while, although your mileage may vary. KhoC, it's generally better practice to go through fastboot first. Reboot by holding power and both volume buttons (up and down). You should get to a black screen with an android in the center, and a tab at the top that will say things like Reboot bootloader, Recovery, Power Off, and other such things. Scroll with the volume buttons, select with power.
thestrangebrew said:
I've got the same no command message and no combination of buttons with the power & volume rocker will get me out of it. looking for suggestions.
Click to expand...
Click to collapse
Care to tell us what combinations you've tried? Saying that none of them work is generally unhelpful, since it's possible you're just forgetting one/slightly malforming the correct sequence.
Rirere said:
Care to tell us what combinations you've tried? Saying that none of them work is generally unhelpful, since it's possible you're just forgetting one/slightly malforming the correct sequence.
Click to expand...
Click to collapse
Yea sorry. I've tried power + volume up, power + volume down & power + both volume up/down at both powering it it on and while the device is actually on. while the device is on, if I press power + volume up, all it does is dim/brighten the screen. power + volume down does nothing. When I'm pressing the buttons, I'm holding them down, which will eventually reboot the device. I get the Google logo and the unlocked padlock, then the android laying down with no command below it.
Edit: I started my own thread this morning about it titled "Need help recovering my Nexus 7" a few posts down so not to hijack this one that has a little more info as well.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
thestrangebrew said:
I've got the same no command message and no combination of buttons with the power & volume rocker will get me out of it. looking for suggestions.
Click to expand...
Click to collapse
Did you get any good suggestions? I'm in the same boat
pmgreen said:
Did you get any good suggestions? I'm in the same boat
Click to expand...
Click to collapse
No nothing I did worked. I contacted Google and I still have 79 days on my warranty so hopefully I'll get approved for the rma. this was actually just today.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
thestrangebrew said:
No nothing I did worked. I contacted Google and I still have 79 days on my warranty so hopefully I'll get approved for the rma. this was actually just today.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
I'm in the same place with my nexus 4. Its rooted with 4.2.2 and i did a restore. Since then i can get the error at recovery mode. Trying to update to 4.3.
Thanks,.
thestrangebrew said:
No nothing I did worked. I contacted Google and I still have 79 days on my warranty so hopefully I'll get approved for the rma. this was actually just today.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
Are you rooted? I thought it negated the warranty. I had contacted Google when it first happened and that's what they told me
pmgreen said:
Are you rooted? I thought it negated the warranty. I had contacted Google when it first happened and that's what they told me
Click to expand...
Click to collapse
It was rooted, and the tech never asked. To be honest, I'm not sure how one would tell if it won't even boot. I'll find out I guess.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Press first power and then volume+ !
Hello'
i have the same issue ( no command in recovery mode )
And first, i have tried volume + and power button, this don't work
Then i take a look to this post, and see that i have to press first power and then volume + , And this is working for me
Thank you
Okay so I was on pa 3.0 and wanted to unroot my device and return to stock. So I used this method, http://forum.xda-developers.com/showthread.php?t=2039162, and I finished all the steps but now my device gets stuck in the splash screen. Any help here?
hoose23 said:
Okay so I was on pa 3.0 and wanted to unroot my device and return to stock. So I used this method, http://forum.xda-developers.com/showthread.php?t=2039162, and I finished all the steps but now my device gets stuck in the splash screen. Any help here?
Click to expand...
Click to collapse
Go into recovery and factory reset but the stock recovery will wipe your sdcard partition
Sent from my Nexus 4
spaceman860 said:
Go into recovery and factory reset but the stock recovery will wipe your sdcard partition
Sent from my Nexus 4
Click to expand...
Click to collapse
Thanks for the reply, and I'm able to get into fastboot mode and whenever I boot into recovery, I just get the dead android sign. And its fine if I lose all my memory because I've backed everything onto my computer.
hoose23 said:
Thanks for the reply, and I'm able to get into fastboot mode and whenever I boot into recovery, I just get the dead android sign. And its fine if I lose all my memory because I've backed everything onto my computer.
Click to expand...
Click to collapse
That's the stock recovery splash screen just press and hold power then press volume up and then let go both buttons and it will bring up the menu screen
Sent from my Nexus 4
Had the same problem use fast boot and flash OEM lock the OEM unlock and then reboot the phone
Sent from my Nexus 4 using Tapatalk 2
spaceman860 said:
That's the stock recovery splash screen just press and hold power then press volume up and then let go both buttons and it will bring up the menu screen
Sent from my Nexus 4
Click to expand...
Click to collapse
Thanks a million!! This worked!!
Sent from my Nexus 4 using Tapatalk 4 Beta
Hi to all
I updated my nexus 4.2.2 to 4.3.3 through the ota.
Now i tried to unlock&root with the nexus 4 toolkit(last version 1.6.8)
Never mind what i'm trying to do, when the device trying to get into recovery there is a lying android red icon with: "no command"
I believe this is a soft brick , but the device is working and the android is boot up normally,
I allso tried to press power key and after he was pressed i conitnue to hold him and press volume up, the only thing that happend is
a red light and no recovery menu, i tried every way to use the tool but the recovery isn't back!
Please help me guys!
You are in the future or what?
Sent from my Nexus 4 using xda app-developers app
---------- Post added at 05:03 PM ---------- Previous post was at 05:03 PM ----------
Thibaultvw said:
You are in the future or what?
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
And it is stock recovery.
Sent from my Nexus 4 using xda app-developers app
You mean't Android 4.3 and the recovery does this for security.
To access the recovery you have to press volume up and power until it unlocks the menu.
Sent from my Nexus 4 using Tapatalk 4
You didn't read my thread!!!
andyabc said:
You mean't Android 4.3 and the recovery does this for security.
To access the recovery you have to press volume up and power until it unlocks the menu.
Sent from my Nexus 4 using Tapatalk 4
Click to expand...
Click to collapse
I did press power key and when it's hold I pressed the volume up - it did nothing!
eyalabush said:
I did press power key and when it's hold I pressed the volume up - it did nothing!
Click to expand...
Click to collapse
You have to keep pressing it and holding it until it unlocks.
Mine and the others unlocks fine so yours should work.
Sent from my Nexus 4 using Tapatalk 4
For how long?!
andyabc said:
You have to keep pressing it and holding it until it unlocks.
Mine and the others unlocks fine so yours should work.
Sent from my Nexus 4 using Tapatalk 4
Click to expand...
Click to collapse
For how long should i press?
I tried 10 times at least, and the result: red light...
eyalabush said:
For how long should i press?
I tried 10 times at least, and the result: red light...
Click to expand...
Click to collapse
Wait, a red light?
Are you on low battery?
Maybe it is either a low battery command, access denied to to too many attempts or incorrect combination.
Try doing the same to the up and down keys followed by the power.
Sent from my Nexus 4 using Tapatalk 4
Battery are full
The battery are full,
I tried doing all the combination , my recovery is dead!!!
any ideas?
eyalabush said:
The battery are full,
I tried doing all the combination , my recovery is dead!!!
any ideas?
Click to expand...
Click to collapse
Pressing the volume up and power key in the same time continuously?
And no I do not mean hold.
Sent from my Nexus 4 using Tapatalk 4
I also have the exact same issue. I never tried entering stock recovery before now and I tried to do it now, after updating OTA to 4.3 and rooting with wugfresh toolkit, 1.6.8. Regardless of how many times I have tried, it just reboots normally and can't access the stock recovery.
aaatoel said:
I also have the exact same issue. I never tried entering stock recovery before now and I tried to do it now, after updating OTA to 4.3 and rooting with wugfresh toolkit, 1.6.8. Regardless of how many times I have tried, it just reboots normally and can't access the stock recovery.
Click to expand...
Click to collapse
So you cannot access the recovery using the bootloader?, if so then it is probably corrupted.
I have the stock recovery image file here which you can flash via Fastboot.
Sent from my Nexus 4 using Tapatalk 4
I imagined the same. The toolkit itself, is giving you the option of reflashing the stock recovery, I think that I will try this at first. The weird thing is that the phone boots up normally, works as it should and is rooted successfully.
Actually there was no need to flash anything new. I finally made it to work. When in the "No Command" screen, you have to press the following:
1) Press only the power button first
2) While holding the power button, press the vol up button for a couple of seconds
3) Let go ONLY of the vol up button, while still pressing the power button.
Tested and working!
Just looked this up for a customer at my shop and works like a champ. Thank you
aaatoel said:
Actually there was no need to flash anything new. I finally made it to work. When in the "No Command" screen, you have to press the following:
1) Press only the power button first
2) While holding the power button, press the vol up button for a couple of seconds
3) Let go ONLY of the vol up button, while still pressing the power button.
Tested and working!
Click to expand...
Click to collapse
aaatoel said:
Actually there was no need to flash anything new. I finally made it to work. When in the "No Command" screen, you have to press the following:
1) Press only the power button first
2) While holding the power button, press the vol up button for a couple of seconds
3) Let go ONLY of the vol up button, while still pressing the power button.
Tested and working!
Click to expand...
Click to collapse
Excellent. Thanks for that. It was doing my head in.
The question is though will OTA updates still work? And the answer is yes. I flashed back to 4.2.2 and the 4.3 update came through OK. Happy days as I may well pass my N4 on soon and it needs to work 100% for a non tech wife.
aaatoel said:
Actually there was no need to flash anything new. I finally made it to work. When in the "No Command" screen, you have to press the following:
1) Press only the power button first
2) While holding the power button, press the vol up button for a couple of seconds
3) Let go ONLY of the vol up button, while still pressing the power button.
Tested and working!
Click to expand...
Click to collapse
Thank you, i was going crazy