Just a thought, i know that symbian phones have a software which utilize the accelerometer and mutes the phone call when turned over. is it possible to have a software to use the fort facing camera or back camera in our wm6 devices to detect light during the even of an incoming phone call? it doesnt need to be on all the time so it does not drain the battery and just turned on during phone calls. so front facing camera should detect either "dark-light-dark" (when in pocket) or "light-dark" when the phone is already out. hope that make senses.
what do you guys think? is it a good idea?
not sure if camera can be used for that purpose at all. I think u need extra hardware for that.
When a phone call is coming in the device has to take care of the following actions:
-device wake up
- initiate the incoming call screen
- start number identification (compare to address book)
- start ringer
Your idea would add the following actions:
- initiate (front)camera
- wait for camera to detect current lightning conditions
- if lighting is below a certain value mute sound
I would think that it takes to long to go trough the complete cyclus.
When you make a call to a PocketPC it takes about two "normal" rings to make a device ring. If you add the extra feature it might even be 4 or 5. Before you can even react the caller might already be redirected to the voice mail I'm afraid.
i thought of that mccune, but u will need another program to analyze the bringhtness, may be a new library, or tap into camera library, which I dont think it's easy to do.
you are right, it's probably not idea to execute camera function while phone ringing, worst case scenario the phone hang, or the call got disconnected.
but i love to see it works
well i see it that if the front camera activate when there is an incoming video call then wm6 should be able to handle just detecting the light effect without hanging. just a thought, at least its a start for all of us that do not have accelerometer and it can be develop for some other use too.
I had the same issue when I had a Tytn II last year.
My issue is that when the phone rings while in normal mode, it is one constant vibration, which I dont like.
Also when i receive a text message in normal mode, the vibration is constant and lasts for about 4 seconds.
BUT
when the phone is in vibrate mode, the vibration for calls is a on/off vibration which I like, and for texts is 3 sharp vibrations which is a lot more useful in distinguishing whether it is a phone call or text that i am receiving when the phone is in my pocket.
Is there anything I can do to make the HD behave the way it does in vibrate mode for all calls?
There must be some sort of registry setting that can be tweaked.
Thanks in advance for any replies..
anyone?
Try this, It could be what your looking for.
http://forum.xda-developers.com/showthread.php?t=437279&highlight=Valert
Would also be interested.
i remember back in the day, my Nokia 6310i (yeah not even color phone) would vibrate to the ring tone.
valert is cool, but on the HD has a bug that disables volume keys
I've installed VAlert but cant find it anywhere?
Try the attached utility. It's conf is under system settings.
nezz, the app has cyrillic interface: any chance to have it in latin (or at least a translation of what the 3 checkboxes mean?)
thanks
Is there a reg tweak for this? When you turn the phone on it does 2 short vibrations. i would like to use this as the sms vibrate alert. Is that possible?
Thanks!
Hi,
I have a couple of questions regarding the Legend's vibrator.
First of all, I would like it to vibrate when receiving a SMS only when in vibration mode. So far, all I can find in the settings is the option to either vibrate or not, no matter what profile is used. Am I missing something, or do I need an app that has further settings?
Second, I think the vibrator is a bit loud, and would love to be able to set the intensity. The first day after I bought my Legend, I was in a meeting with just two other people in a small office, and when my phone rang (vibrated) it attracted quite some attention because it was so loud. Again, am I missing where to change this, or do I need an app?
I tried searching the Market for an app to control vibration settings to address both or even just one of these issues, but didn't find anything useful. The closest was Smart Vibrator, which lets me compose vibration patterns for SMS as well as calls, which could solve issue #2 by doing a pattern of very brief vibrations - but it's still not exactly what I am looking for. Have anyone come across something more useful?
Ralleza said:
Second, I think the vibrator is a bit loud, and would love to be able to set the intensity. The first day after I bought my Legend, I was in a meeting with just two other people in a small office, and when my phone rang (vibrated) it attracted quite some attention because it was so loud. Again, am I missing where to change this, or do I need an app?
Click to expand...
Click to collapse
How are others finding the vibrate function? Good? Bad? Weak? Strong?
Coming from a Palm Pre, one of the frustrating aspects was a weak vibrator; causing me to miss notifications of calls, txts, emails, etc.
I've noticed my phone always starts to ring at where I set the volume to and then escalates to be very loud after a few seconds. I didnt see any settings to change this. Is this happening to anybody else?
Is it in your pocket when it does that?
I noticed in the HTC Sense demo video it says if it is in your pocket or purse it will ring loud so you can hear it. I think it has to do with proximity and light sources. If i have it sitting out, it will ring quietly, but it is always loud in my pocket.
adamr240 said:
Is it in your pocket when it does that?
I noticed in the HTC Sense demo video it says if it is in your pocket or purse it will ring loud so you can hear it. I think it has to do with proximity and light sources. If i have it sitting out, it will ring quietly, but it is always loud in my pocket.
Click to expand...
Click to collapse
Actually yeah. Thats usually when it gets loud. I dont really like that as it gets super loud sometimes. Why wouldnt they have a setting for this?
Any news on this? Because I also find it quite annoying that the ringer is so loud even when I'm sitting in the quiet office...
alphanimal said:
Any news on this? Because I also find it quite annoying that the ringer is so loud even when I'm sitting in the quiet office...
Click to expand...
Click to collapse
I have the same issue! It happens on ALL Sense ROM's. If I am running AOSP (CM6 or MIUI) it is not an issue. Are there any ways to disable this setting if it is supposed to do so? Mine is on my belt in a case and when I'm in the office it rings way too loud. If the phone is on my desk it rings as I have the volume set.
Actually I found you can disable the loud ringer in settings really easy
Settings --> Sound --> Pocket mode
There's no way to adjust the volume though,
Apparently the Shift has the same issue as my EVO or as Sprint would call it..."feature".
http://forum.androidcentral.com/showthread.php?p=669629#post669629
You would think there was an app out there to override this.
alphanimal said:
Actually I found you can disable the loud ringer in settings really easy
Settings --> Sound --> Pocket mode
There's no way to adjust the volume though,
Click to expand...
Click to collapse
What device/ROM are you running? There is no setting for Pocket mode under settings -> sound on the stock EVO Shift 4G (at least not on mine). Anyone else find this?
I have a Desire Z with the original ROM (Froyo + Sense)
alphanimal said:
I have a Desire Z with the original ROM (Froyo + Sense)
Click to expand...
Click to collapse
that setting dont apply to shift
Did a complete wipe 2x using Amon Ra Recovery 2.3 and then flashed a stock image file from HBOOT and updated WiMAX, PRI & NV Radio. The issue was not present on the stock ROM. Wiped the stock ROM and flashed Myn's RLS5.....no more issues. Something was corrupt and enabled the sensor to trigger ring loud (when covered or senses low light) as it is designed to do on the Shift. The EVO does not have Pocket Mode in settings. Whatever the cause.....it is now resolved!
I sent a tweet in the direction of @htc about this yesterday, but they haven't answered. Hopefully we get an update that gives us a 2.x release of sense, not this weird "you have some of the features of new sense but not the whole package." The other feature that I know is there is the one where you can flip the phone over to silence the ring, and in fact, BOTH features are undocumented - the user manual for the shift doesn't mention declining a call by flipping the phone OR the word pocket except in warnings about where not to keep it.
I don't have any hope of a satisfactory answer, though, because in an earlier answer to someone about bugs, they said to submit something at htc.com/support and make sure to mark it a bug report - you can't do that anywhere on the email form and the other two options for support aren't things you "submit." The two times I've contacted them by email were also tremendous disappointments, so... there you go.
Tried to second your post on HTC's support forum but their forum software is misconfigured and my email server is rejecting their mail because it is not a fully-qualified hostname. Meh. Like you, I don't hold out enough hope of a fix to bother with the registration process.
You mentioned flip to silence, but there is actually a setting on the Evo Shift 4G to silence the ringtone when the phone is moved. It's under settings - sounds, and it is "quiet ring on pickup". Since the action of flipping the phone involves moving it, I wonder if you are seeing that setting working when you flip your phone over. My phone stops ringing (if it's not in a pocket) when I pick it up off the table. It doesn't decline the call, it just stops the ringer.
Edit: eh, I made an allowance on my mail server so HTC's misconfigured SMTP server could send my activation message and let me register.
By the way, I posted a workaround on Android Central that works for the way I use the phone. I created a silent ringtone. Then I set the phone to vibrate as well. So in my pocket I feel/hear the vibration but I don't get the ridiculously-loud rings. But I can hear my notifications at normal volume. When the phone is on my desk, the vibration and screen lighting up are enough of an alert for me. Obviously this won't work if you ever keep the phone in a bag or somewhere that you can't hear or feel the vibration, but it works for me as a pocket user.
Three ticks up from silenced on the volume rocker:
Picking the phone up off my desk quiets the ring, flipping it silences the ring. I wonder if turning off quiet ring on pickup will turn off flip to silence... might as well try it.
aaand no it doesn't. Pickup didn't quiet (per the setting now being off) but flip still did silence the ring.
Interesting note: flip-to-silence is actually a silencer; it doesn't decline the call immediately.
http://community.htc.com/na/htc-forums/android/f/112/t/9935.aspx
For anyone else that wants to weigh in on the issue on the official HTC support forum. Maybe they won't ignore us too hard.
nurrwick said:
Three ticks up from silenced on the volume rocker:
Picking the phone up off my desk quiets the ring, flipping it silences the ring. I wonder if turning off quiet ring on pickup will turn off flip to silence... might as well try it.
aaand no it doesn't. Pickup didn't quiet (per the setting now being off) but flip still did silence the ring.
Interesting note: flip-to-silence is actually a silencer; it doesn't decline the call immediately.
Click to expand...
Click to collapse
Ok, makes sense - since I use a silent ringtone, the "quiet" and "silent" are the same to me, LOL. But yes, it doesn't decline the call.
I actually liked the Touch Pro2 where flipping during a call would turn on the speakerphone. Why can't they keep good features like that instead of forcing this new stuff down our throats with no option to turn it off.
Bump/Update: After two tweets on the issue and an entire week of the post I made sitting on the HTC forums, I have had enough of being ignored and went to the email support option.
I'm not resetting my phone again, so I instead borrowed the New Issue text from Google Code project pages and sent steps to duplicate.
Anybody else that might have this problem is welcome to weigh in; I gave links to this thread and the one over on Android Central in my forum post on HTC, which is linked in the support message I sent.
Another update: Today I received my response; I don't have to reset my phone (yet) and my concern is being escalated to whatever the next level of CS is called.
They say escalated department is first-come, first-served, so it may be a while before I know more.
The problem is that HTC sees this as a feature, not a bug. They market this as a way to hear your phone when it's in a bag. While it makes perfect sense to us end-users to have an option to turn this off, from a lab testing standpoint it's not a priority because the function works as designed. If HTC had really thought this through, they should realize that there are some things phones should never do, and ringing at maximum volume unless specifically directed by the user is one of them.
The funny thing is that I'd like almost the exact opposite behavior. I'd prefer the phone to ring (quietly) on my desk, and automatically switch to vibrate when it's in my pocket (as determined by the prox sensor). But people who carry their phones in bags or purses wouldn't benefit from this option. Everybody's needs are different; HTC just determined what they think is the most common scenario and coded Sense that way. I have to give them credit for thinking up the idea, but since it doesn't work for everyone it should be more flexible.
Thanks for taking the time to bring this to their attention. It may well be that a couple of generations of phones from now we'll start seeing more options in these settings, which would be fantastic.
Update: HTC has been calling me at work, once yesterday once today. I have not been at work this week but will be in tomorrow; they gave me a number to call if I wanted to get in touch with them sooner. I will be calling them back as soon as I'm done with my planned tasks tomorrow (assuming they haven't called me first).
Here's hoping news about when we get an update that stops this nonsense comes swiftly!
Hi,
I am searching for a little Tool, which switches the telephone profile (or the Ringtone Settings, whatever).
What I want to do:
If the Diamond is in my Pocket, he should vibrate and ring, but if he is lying on the table, he shouldn't vibrate, just ring. (Best whould be, if it works even with the Calendar: If there is an appointment, he should vibrate when he is lying on the table or in the pocket, but no ringtone.)
I think that should work via the light sensor, but I haven't found a tool, that does this.
Whould be very nice if someone knows a tool.
Sorry for my bad English and best Greetings,
Tutmanichtun