I got my phone unlocked from t-mobile and now can use AT&T SIM in it. For some reason I am not getting 3G/4G connectivity, just EDGE (2G). I had no issues on t-mobile 3G/4G network. I have been playing with APNs and nothing works to make phone switch to 3G. I remember there is a setting to select either GSM or WCDMA or both, but can't find it. Maybe there is something else that needs to be configured? Would the SIM card not support 3G network? I have Tytung ICS 4.0.4 r3.4 installed on the phone.
Just tried t-mobile SIM and getting good 3G/4G (HSPDA+) network. With AT&T SIM just EDGE.
microcell said:
I got my phone unlocked from t-mobile and now can use AT&T SIM in it. For some reason I am not getting 3G/4G connectivity, just EDGE (2G). I had no issues on t-mobile 3G/4G network. I have been playing with APNs and nothing works to make phone switch to 3G. I remember there is a setting to select either GSM or WCDMA or both, but can't find it. Maybe there is something else that needs to be configured? Would the SIM card not support 3G network? I have Tytung ICS 4.0.4 r3.4 installed on the phone.
Just tried t-mobile SIM and getting good 3G/4G (HSPDA+) network. With AT&T SIM just EDGE.
Click to expand...
Click to collapse
The tmousa hd2 does not have the right antenna to get the AT&T 3G speeds. One would need the Australian hd2 in order to get 3G on AT&T.
gbuscrizist said:
The tmousa hd2 does not have the right antenna to get the AT&T 3G speeds. One would need the Australian hd2 in order to get 3G on AT&T.
Click to expand...
Click to collapse
This seems pretty f'ed up. I've been seeing signal issues on my phone, but haven't realized it's bad antenna design.
I don't get it from the technological point of view as why t-mobile picks up 3G signal, and ATT doesn't. Both use the same UMTS technology, including frequencies.
Now, can the antenna be replaced with Australian type one?
--------------------------------------------
I take it back, that T-Mobile and AT&T use the same UMTS technology for frequencies. T-mobile uses 2100Mhz, while AT&T uses 1900Mhz. This is totally f'ed up. This is not the antenna problem. It's the phone's hardware design.
Does Australian HD2 use 1900Mhz for 3G technology?
no, not the same frequencies at all. (Its not bad antenna design, its the hsdpa bands), , t mobile uses 1700/2100 and at&t uses 850/1900.
Now, can the antenna be replaced with Australian type one?
Click to expand...
Click to collapse
no, its not the actual antenna, its the radio circuitry. (unless you count buying an australian hd2, take out the mainboard and put it in your t,mous,in which case its no longer a tmous, its a telstra hd2 in a tmous case.)
It is very sad news for me to not be able to use HD2 anymore. HD2 is an amazing phone. It doesn't seem worth to pay $800 for Telstra HD2. It is just ridiculous that carriers use their own frequencies (non standard) so people have to buy their phones.
I just bought Samsung Galaxy S3, AT&T version to might as well use the LTE.
Related
Does the current HD2 that one can buy from various sources work on the ATT 3G network with a current ATT SIM card?
No, You will not get 3G. the current phones do not have the 850MHZ that ATT uses for 3G.
You have to wait till mid to end of this month when the phone is out with the 850MHZ.
Where is this info from? if this is true I will certainly be getting the hd2. Will it be 850/1900?
The phone will have 850MHZ.
I have been told it will should be out mid to end of this month in Australia.
I bought my HD from there and will be buying the HD2 as soon as it is out.
n4v1n said:
Where is this info from? if this is true I will certainly be getting the hd2. Will it be 850/1900?
Click to expand...
Click to collapse
From HTC australia. It'll come out for the Telstra's NextG network which runs on 850/2100. Since AT&T is overhauling their 1900mhz tower for the much faster 850mhz, the 850/2100 Telstra version is very ideal.
i'm kinda afriad of buying the HTC HD2 that will come to the US in the Q1 of 2010.
I have one question about it ,,, if i bought it " US HD2 " ,, is it going to work outside the US and work with other carrier like the iPhone for example?
thedeathblow said:
i'm kinda afriad of buying the HTC HD2 that will come to the US in the Q1 of 2010.
I have one question about it ,,, if i bought it " US HD2 " ,, is it going to work outside the US and work with other carrier like the iPhone for example?
Click to expand...
Click to collapse
Ok let's clear some things up. The "US HD2" is the T-Mobile version. T-MOBILE. What does this mean? If you're with AT&T and bought the "US HD2"/TMobile version, you can talk but will be limited to EDGE for data...no 3G. The HD2 is a quadband phone so you can use it to talk all over the world. Notice that i bold only the word talk? You won't be able to get 3G outside of the US unless the country/carrier you're visiting has 1700/2100 UMTS/3G band (which most don't). So if you're visiting other countries, you can talk all you want, but will more than likely stuck with EDGE for data. Period.
So let's recap:
1) "US HD2" = T-Mobile USA version
2) Telstra NextG HD2 (australian) = compatible with AT&T 3G
3) HD2 is a quadband phone for voice. You can talk on pretty much any country.
4) HD2 is a dualband phone for UMTS/3G/data. You will be stuck with EDGE unless you have the correct band.
5) Tmobile sucks
6) ?????
7) PROFIT!
lude219 said:
2) Telstra NextG HD2 (australian) = compatible with AT&T 3G
Click to expand...
Click to collapse
so if i bought from Telstra NextG, i can work with At&t 3G using at$t? and also TALKING if i'm using other carer like T-Mobile?
thedeathblow said:
so if i bought from Telstra NextG, i can work with At&t 3G using at$t? and also TALKING if i'm using other carer like T-Mobile?
Click to expand...
Click to collapse
Not at the same time. To use a carrier's service (data or voice) you need a sim from that carrier. So to use at&t data you need an at&t sim; to use T-mo voice you need a T-mo sim. The HD2 is not a dual-sim phone, so you can only have one sim installed at a time, and therefore can only be using either at&t or T-mobile at any given time. You can swap sims if the phone is unlocked to use the other carrier's services. I have no idea if the Telstra HD2 will be unlocked or is unlockable...maybe someone who is using a Telstra HD in the USA can respond to that issue.
Hope this helps.
so i take it that T-mo and ATT use different frequencies for their 3g?
JSmid6 said:
so i take it that T-mo and ATT use different frequencies for their 3g?
Click to expand...
Click to collapse
Yep,
T-mobile use 1700MHz 3G frequency in the USA when most of 3G compatible devices (at&t) run on 850/1900MHz 3G/HSDPA freqencies
Hi,
I am a new user and I hope I am in the right place.
I just came back from Sydney Australia, and while I was there I bought teh HTC HD2 phone. WHen I got it it had all the Telstra crap on it and It was useless for me since I have t-mobile.
After I bought, I updated the ROM to RUU_Leo_HTC_WWE_1.66.405.2_Radio_Signed_15.30.50.07U_2.06.51.07_Ship.exe
I had to use HSPL but I got it to work.
I just arrived to New York today and I could not wait to turn on the phone and see it in action. To my dispointment, I could not get 3G on it. The band and network are set to AUTO. The only thing I get is Edge.
I tried all manual bands and no luck
So then I tried to update the ROM to LEO_2.02.531.14_WWE_B28223\LEO_2.02.531.14_WWE_B28223
But it does not seem to work, no home screen just HTC and the windows start icon, phone and contacts appear on the bottom. Dont know whats wrong?? but perhaps some can shed some light.
Going back to ROM to RUU_Leo_HTC_WWE_1.66.405.2_Radio_Signed_15.30.50.07U_2.06.51.07_Ship.exe for now.
Just want to know if I am on the right path?? Will this phone I bought work with t-mobile 3g service?
and what ROM is the best for this HTC HD2 phone and how can I get it?
Any tips would be awesome !
Thanks
richsark said:
Just want to know if I am on the right path?? Will this phone I bought work with t-mobile 3g service?
Click to expand...
Click to collapse
That phone will not work with US T-Mobile. Sell it on ebay and wait for the US T-Mo HD2.
T-Mobile uses the weird 1700/2100 UTMS bands in the US, and pretty much only phones made specifically for it will work.
Crap'po'la
I was afraid of that. so I can use it, just wont get 3G
So no ROMS would help right?
Is there A ROM that is better then what I have now? I have RUU_Leo_HTC_WWE_1.66.405.2_Radio_Signed_15.30.50.07U_2.06.51.07_Ship.exe
Thanks
hey richsark ill take it off your hands
Hi, well... whats the offer? on a 3 day old phone??
pmed........
pmed............
Hi, The phone I bought straight from the Telstra shop was unlocked. I did put my SIM in it and it registers as TMobile but no 3G. ( I did this in the States) Over there in Sydney with my Tmobile SIM it was 3G !
My guess is the bands are not compatible. I am stuck with Edge I guess... unless there is a way to make it work
Thanks
TMobile will have a roaming agreement with Telstra which means while in Australia you will have connected to the Telstra 3G network using the 850MHz frequency, but as a "visitor". Once back in the US the TMobile network uses 1700MHz which the Telstra version of the HD2 won't work with.
I travel a fair bit to the US and UK for work so prior to the HD2 I had a 850/1900/2100 UMTS phone which covered me for AT&T in the US. Now that AT&T are moving to use 850 more widely the lack of 1900 won't be a problem and 2100 is used widely in the UK and Europe.
Hello if someone could help me with my 3G connection inquiry, I would greatly appreciate it.
I bought this phone unlocked from Hong Kong and brought it back to Canada. But the 3G connection through Rogers won't work. I am able to connect to edge (When i pop in my sisters sim card which has a data plan, as my sim card currently does not have a data plan).
I talked to Rogers and they said that everything is compatable (After mentioning the phone frequencies and speed capabilities) and that the only reason 3G isnt working is that I have not configured my phone properly for 3G and at this moment it is configured for 2G (Edge).
I then contacted HTC and they said the reason was because "for the Rogers network, their 3G signal is operated on the 850/1900 MHZ band and the Touch HD2 operates on the 900/2100 MHZ band." Could this be the reason? Will i never taste the pleasures of a 3G connection?
PLEASE HELP!!
since you have bought it in hongkong most probably you have the asian version. It comes with 900/2100 MHZ bands and as you mentioned ROger needs 850/1900 frequency.
You could also get Telstra version from Australia and unlock it as it has 850/1900 frquency so that you could get 3g. But not possible on the one you already have.
Yea its the frequencies. When I take my phones abroad, I always check what frequencies the country has. If the frequencies don't match, the phone won't work in terms of placing calls, 3G etc.
is there a way to unlock ?
meow914 said:
is there a way to unlock ?
Click to expand...
Click to collapse
There is no software that can get around this "problem"
It is purely a hardware limitation.
perhaps with flashing radio but i'm not shure
[email protected] said:
perhaps with flashing radio but i'm not shure
Click to expand...
Click to collapse
Nope, it still will not support the correct bands that he needs
This is a completely hardware related problem
simple solution....
simple solution...sell it or trade it fot the right one
btw..i did read alot on the other forums about this..but nothing as bad
hi everybody, a friend of mine got a us tmobile version of the hd2 after he saw how cool my european hd2 is. (switched from an iphone )
so..we get no reception anytime the phone is inside a building...have to run on the balcony to make a call. outside it can get full signal but as soon as you enter building..NOTHING!
i flashed all possible radios and several different roms with ABSOLUTELY NO IMPROVEMENT.
switched different carriers..tried bell and fido which use different networks.
oh..and btw...when i put the tmous and european version side by side..one gets no signal and the other one..full bars.
also tried android :S..still nothing
i`m really out of ideas..should we send it back??
you might want to unlock the t-mo version 1st, but a better question; where are you using them?
it`s been already unlocked..using it in montreal canada on two of our major networks..fido and telus..which work really well on my european version
mikgangal said:
it`s been already unlocked..using it in montreal canada on two of our major networks..fido and telus..which work really well on my european version
Click to expand...
Click to collapse
Telus isn't GSM... it's CDMA
It should work on fido, I was using it with my T-mo HD2 in Ontario.
Try disabling/enabling 3G. Also, try to get a newer sim card from fido. (try a friend's first)
But I think the problems comes from the frequency bands...
Fido/Rogers use the 1900/850 Band. The american phones usually are compatible with the 850 only. (I think) the T-mo HD2 has the 1800 and 850 bands.
So you might have a weak signals indoors because of that. Try rogers network, you might get better coverage.
Also, did you try swapping the sim cards between the 2 HD2s?
Metallic-Force said:
Telus isn't GSM... it's CDMA
It should work on fido, I was using it with my T-mo HD2 in Ontario.
Try disabling/enabling 3G. Also, try to get a newer sim card from fido. (try a friend's first)
But I think the problems comes from the frequency bands...
Fido/Rogers use the 1900/850 Band. The american phones usually are compatible with the 850 only. (I think) the T-mo HD2 has the 1800 and 850 bands.
So you might have a weak signals indoors because of that. Try rogers network, you might get better coverage.
Also, did you try swapping the sim cards between the 2 HD2s?
Click to expand...
Click to collapse
i already tried swapping the sim cards between the two phones..same results in all the locations. and my friend`s sim card is brand new...:S
as much for the band...well..i do get full bars outside..i don`t really get what`s wrong
anybody has any other clues?
tnx alot
anybody has any ideas?
Hi guys,
I just arrive US and got an AT&T sim, I use the same HTC Magic (32A) I used to use in Taiwan but I got no 3G reception
I'm quite sure the 32A magic can operate on AT&T's 3G Mobile Network since it has:
HSDPA/WCDMA: 900/2100MHz
Quad-band GSM/GPRS/EDGE: 850/900/1800/1900MHz
Anyone know why?
I got no Data Plane with my SIM, I'm using a "Nation 1440" family plan.
I got the correct APN set on my phone (though it has no relation with 3G reception)
I'm now using New Radio (6.35.10.18), 1.76.2007 SPL, ROM is Smoki 0.7.6.
The RF Signal Tracker said my Network Type is "EDGE"
I also checked with ATT and they said I got excellent 3G reception in my neighborhood.
And I'm sure I didn't set the phone to work in 2G network only.
This set up works perfectly in Taiwan, so I got no idea what's happening?
ma1121 said:
I got no Data Plane with my SIM, I'm using a "Nation 1440" family plan.
Click to expand...
Click to collapse
I'm no rocket scientist but I reckon that you got no 3G because you don't have the Data Plan... I would recommend adding the Data Plan, then testing out the reception, and seeing if you get 3G coverage. I don't think there is a fee for canceling Data if it turns out that you still get no 3G, at-least not with T-Mobile and AT&T that I know of. I've added and removed Data Plans a few times without many consequences.
shafiq265 said:
I reckon that you got no 3G because you don't have the Data Plan...
Click to expand...
Click to collapse
That's what I thought in the first place, so I called the customer service and they told me that reception has nothing to do with Data Plane.
Which still make sense to me because from my knowledge, the registration of 3G/2G network is not that essentially related to Data Plane since UMTS / GSM is just a RF technology, normal voice service can also operate on a 3G (to be more precise, the UMTS) network.
But I'm not that familiar the US carrier's policy, so there's still the possibility that a SIM with no data plan is prohibit from registering to a 3G network.
I'll try to find a SIM with Data Plane and put it in my Magic, see how it works...
(My relative happened to be using iPhone 3GS with data plane)
ma1121 said:
I'll try to find a SIM with Data Plane and put it in my Magic, see how it works...
(My relative happened to be using iPhone 3GS with data plane)
Click to expand...
Click to collapse
That would be the best bet. Experiment with different sim cards to rule out a problem with the device itself. My opinion would be to take it to an AT&T dealer to quickly cycle through sim cards, if they have any with Data on hand.
I'm quite sure the 32A magic can operate on AT&T's 3G Mobile Network since it has:
HSDPA/WCDMA: 900/2100MHz
Click to expand...
Click to collapse
AT&T uses HSDPA/WCDMA 850/1900MHz for 3G, so you won't be able to get it on that phone. T-Mobile uses 1700/2100 so you might be able to get it with them. Call and see what frequencies the towers in your area use.
Good luck.
oldnoob said:
AT&T uses HSDPA/WCDMA 850/1900MHz for 3G
Click to expand...
Click to collapse
Yeah, I google for a while this afternoon and found that too...
The problem is I do have 850MHz & 1900MHz but thay ONLY operate on GSM, not WCDMA.
T-Mobile uses 1700MHz for down-stream (or up-stream? I forgot). I only have 2100MHz so I suppose I'll have no luck with T-Mo as well.
I guess I'll do without 3G for a while, until I have more budget to get a new Android phone that do operate on ATT's 3G network
Ps. I cross tested my SIM using my relative's iPhone 3G, sure enough, my SIM has 3G reception without question.
Thanks for help from all of u.
The phone we have is a SM-G900F international, unfortunately I can only get 2G on this thing while on Telus and won't even connect on Rogers (which doesn't make sense). Is it possible this phone is bricked? If yes, can it be fixed?
Thanks,
Xol
xoltrix2000 said:
The phone we have is a SM-G900F international, unfortunately I can only get 2G on this thing while on Telus and won't even connect on Rogers (which doesn't make sense). Is it possible this phone is bricked? If yes, can it be fixed?
Click to expand...
Click to collapse
You don't understand what bricked means. If your phone was bricked, you wouldn't get 2G either. You would have the same reception as a brick does.
Your model supports most, but not all of the Telus and Rogers frequencies. So one would expect it to work most of the time. If you have a Telus or Rogers SIM as opposed to roaming on those systems, then open a support ticket with your carrier.
It sounds like your phone is not provisioned correctly. That may be as simple as updating your APN information or may need carrier side adjustments to your account configuration.
If you are in a fringe area, one that is only served by a single 3G /4G band then the problem could be that your phone simply does not support 3G 1700 or 4G 700/1700 that are used in Canada.
.