Rear camera flipped and mirrored on CyanogenMod 10 (TF101) - Eee Pad Transformer General

Hi :good:
I cannot post at developer`s forum about CyanogenMod 10 from RaymanFX
There is one BIG problem with CyanogenMod 10 JellyBean (4.1.1) on my Slider SL101=TF101 -
Rear camera flipped and mirrored (and the images too).
(Its really crazy cam)
If u dont know, make crosspost here, plz. (if it does not violate the rules of the forum)

Anyone, help me plz :crying:

Sorry guys, but i ll flood here ten posts (for grant acces to developments forum).

My first phone was Nokia 3110 (non classic, from 1997 year)

My Asus TF101 (old Tegra 2, 1280*800) = 7427 (AnTuTu Benchmark)

MadCat. said:
Sorry guys, but i ll flood here ten posts (for grant acces to developments forum).
Click to expand...
Click to collapse
This might get you in trouble with the mods
I have just installed this ROM and have no problems with the camera - did you wipe cache, dalvik etc as normal. I wipe everything possible before flashing a new ROM, better safe than sorry I think. Always produced the best results for me and I am not bothered about having to re-install after as I don't have much on my tablet. A very noobie attitude but my choice.
Regards
Sent from my Transformer using xda app-developers app

schotte said:
This might get you in trouble with the mods
I have just installed this ROM and have no problems with the camera - did you wipe cache, dalvik etc as normal. I wipe everything possible before flashing a new ROM, better safe than sorry I think. Always produced the best results for me and I am not bothered about having to re-install after as I don't have much on my tablet. A very noobie attitude but my choice.
Regards
Sent from my Transformer using xda app-developers app
Click to expand...
Click to collapse
sure there's no problem with the tf101 , this rom was built for that . but he and myself are running the sl101 which is only slightly differerent. there is a compatibility pack for ICS roms but no one had made one for JB yet.
not only is the rear camera flipped but the software keyboard will not work either. physical keyboard is always set to on whether in tablet mode or slider mode . turning physical keyboard switch to off does nothing.

hoshi411 said:
sure there's no problem with the tf101 , this rom was built for that . but he and myself are running the sl101 which is only slightly differerent. there is a compatibility pack for ICS roms but no one had made one for JB yet.
not only is the rear camera flipped but the software keyboard will not work either. physical keyboard is always set to on whether in tablet mode or slider mode . turning physical keyboard switch to off does nothing.
Click to expand...
Click to collapse
I have the same issue.
What is really annoying is that my Nandroid backup did not fix the issue.
Apparently there is a piece of kernel/drivers missing.
Camera upside down, no wifi.
An update to CM 9 or 10 fixes wifi, not the camera.
Using roation locker I can live with the keyboard issue, but not with the camera.
This sucks, I hope anyone has a solution.
Other problem is I tried to revert to default firmware, but I have a modded recovery, so the Asus script does not work and 1-click tool is unable to detect the device. adb just does not see the device with the nandroid restore and on CM 9 it says no ICS.
Any help is greatly appreciated/

Having the same problem here, I believe that there is a need for a lidpatch (SL101, not TF101)
Sent from my Slider SL101 using xda app-developers app

Has anyone been able to make any progress with finding a compatibility pack for the sl101? With CM, jelly bean or even anything newer? I have been searching everywhere for roms and such. Really need an update for my slider. If anyone has any idea please let me know!

Minikefala said:
Has anyone been able to make any progress with finding a compatibility pack for the sl101? With CM, jelly bean or even anything newer? I have been searching everywhere for roms and such. Really need an update for my slider. If anyone has any idea please let me know!
Click to expand...
Click to collapse
There is no compatible 4.1-4.4 ROM or compatability pack for the slider yet...
There is a compatibility pack only for 4.0 ROMs...
Sent from my Nexus 5 using xda app-developers app

DK5 said:
There is no compatible 4.1-4.4 ROM or compatability pack for the slider yet...
There is a compatibility pack only for 4.0 ROMs...
Sent from my Nexus 5 using xda app-developers app
Click to expand...
Click to collapse
I appreciate your response. Would you have any suggestions for any rom updates or custom roms that I may use? I am currently running 4.0.3. Your feedback is greatly appreciated!

Minikefala said:
I appreciate your response. Would you have any suggestions for any rom updates or custom roms that I may use? I am currently running 4.0.3. Your feedback is greatly appreciated!
Click to expand...
Click to collapse
There is now promising progress with porting KatKiss4.4.2 .
There is no compaitible ROMs further than 4.0.3 for now....

Related

[DEV/LEAK] Acer Iconia Tab A200

Here are some updates files from the Acer Iconia Tab A200 (Honeycomb 3.2.1), that seems to be a "low-cost" A500.
All files can be found here : http://vache-android.com/v1/index.php?site=files&cat=38
It's including a new Acer Ring app and lockscreen shortcuts.
It also have a new Acer Iconia Tab bootanimation.
Screenshots :
What it does not have :
-Rear Camera
-Dolby Mobile (or it's not active atm)
-Maybe other things i didn't see.
ROM based on A200 system by fguy (only for test purpose)
New lockscreen looks very nice!
Yep, there's also a shortcut to take screenshot, really usefull, and to open the app drawer. That's a nice idea from Acer.
Yay something new!
But alas, Android 4 is on the horizon. And we all know how Acer loves to update!
does it work with 50x ?
damador said:
does it work with 50x ?
Click to expand...
Click to collapse
Not as it is, but by changing the boot.img from an A500 it's working/booting well.
thx . it is possible to extract and flash lockscreen only ? what apk is for it
Sent from my A501 using Tapatalk
damador said:
thx . it is possible to extract and flash lockscreen only ? what apk is for it
Sent from my A501 using Tapatalk
Click to expand...
Click to collapse
It's not an apk, it's included in the framework and it's a pain to port it to another ROM.
vache said:
It's not an apk, it's included in the framework and it's a pain to port it to another ROM.
Click to expand...
Click to collapse
What about the Acer ring app? Can that be easily extracted?
tgtoys said:
What about the Acer ring app? Can that be easily extracted?
Click to expand...
Click to collapse
Yes, but to have it working the framework have to be edited too.
vache said:
Yes, but to have it working the framework have to be edited too.
Click to expand...
Click to collapse
Makes sense. Thanks for the work. And the rom
vache said:
Yep, there's also a shortcut to take screenshot, really usefull, and to open the app drawer. That's a nice idea from Acer.
Click to expand...
Click to collapse
With the screenshot, isn't that not included in Android (unless rooted?) or implemented to use without root - I think ICS is the first one with native screenshot included?
parker09 said:
With the screenshot, isn't that not included in Android (unless rooted?) or implemented to use without root - I think ICS is the first one with native screenshot included?
Click to expand...
Click to collapse
ASUS and some other HC ROMs have had screen-shot built-in for awhile right from the factory (hold app history button down etc.) I don't think you had to be rooted, but I could be mistaken since these were custom ROMs I was using and was always rooted.
ROM Acer Iconia Tab A500 EV032_A200_0.003.00_WW_GEN1 - HC 3.2.1
Base http://vache-android.com/v1/index.php?site=files&file=119
Add root & flexrom app
For overclocking use kernel 3.7 http://forum.xda-developers.com/showthread.php?t=1170319
What it does not have :
-Rear Camera
-Dolby Mobile
Only for test view
No continue.
Download: http://www.multiupload.com/WBY5J9S98W
To install only through CWM on A500
Thanks for that, will give it a go fguy.
_motley said:
ASUS and some other HC ROMs have had screen-shot built-in for awhile right from the factory (hold app history button down etc.) I don't think you had to be rooted, but I could be mistaken since these were custom ROMs I was using and was always rooted.
Click to expand...
Click to collapse
Ah okay, my bad, didn't think they had it.
acer did good job!
A200 is 3.2.1,and A500 is only 3.2?
Is this ROM in development?
How is it functioning so far?
It does not have back camera as in the a200 does not have one / and / or this ROM does not have it?
Does anyone have a list of bugs in this ROM?
I would love to test when I get home, want to know if it's worth flashing!
PS Love the lockscreen!
Damn, I get to the Acer logo, and nothing. Just sits there.
Without having checked, I'd guess that most "H/W not working" problems are simply missing drivers (i. e. we'll have to wait for Acer to fix them or reverse-engineer existing ones -- which I'm not going to try as it tends to be one huge pain in the ___). Other than that, I guess this ROM is fairly stable with minor glitches in the UI and framework (most leaks are, I haven't tried this one).
haag498 said:
Without having checked, I'd guess that most "H/W not working" problems are simply missing drivers (i. e. we'll have to wait for Acer to fix them or reverse-engineer existing ones -- which I'm not going to try as it tends to be one huge pain in the ___). Other than that, I guess this ROM is fairly stable with minor glitches in the UI and framework (most leaks are, I haven't tried this one).
Click to expand...
Click to collapse
The stuff that doesnt work seems to be because the a200 doesnt have it, ie the a200 has no rear facing camera so this rom has no rear facing camera. In a sense its missing, but for what it is the rom functions fully. I'm actually shocked to see this thread, i didnt know this was posted on XDA and found it elsewhere about a week ago and have been using it as my daily not realizing it was a leaked rom (rookie mistake not checking the thread date for the other forum that had it) and I actually like how smooth it is and feel like its just as stable as the stock a500 rom. Then again, I dont extensively push my tablet to the limit, I do my budget/check book, play around online and occasionally hook up a ps3 controller and play some SNES so maybe someone else should comment on the stability of the rom. Only problem I can find is I hear the latest market is 3.4.4 and this rom seems stuck on 1.1.0 and I cant figure out how to get the market all the other roms had(it has the market I had when I pulled this thing out of the box, not the one that came when I updated).

[sgt]-[discussion room] CyanogenMOD 9.0 by te4m[MTD][4.0.4]

CyanogenMOD 9.0 by TE4M NOW MTD!!!!!![4.0.4]
dear all,
this thread is created to seperate non development post inside the cm9 development thread and to keep it clean.
WHAT CAN BE POSTED HERE?
-Related to cm9.0
-problems during installation
-Possibilities of bugs
-All the noob questions
WHAT should not be posted?
-thanks,thank you....
-please do not report SAME BUG
-Do not report if you are downloading new release (just download it and report bugs only)
CM9.0 THREAD
http://forum.xda-developers.com/showthread.php?t=1385153
HUMBEROS UPLOAD AREA
http://www.humberos.com.br/p/android-ics.html
GREAT NOW WE HAVE OFFICIAL NIGHTLIES
GSM- http://get.cm/?device=p1
CDMA- http://get.cm/?device=p1c
PEOPLE BE CAREFUL!!!!! NOW BUILDS ARE MTD (FOR MORE INFORMATION LOOK AT POST 2)
hit thanks if i helped you
Installation guide
PEOPLE NOW BUILDS ARE MTD!! FILE SYSTEM BE CAREFULL
FOR INSTALLING MTD BUILD IT IS [MUST] COMPULSORY TO RESTOCK[ FOLLOW TILL STEP 3]
DONOT!!!!!! RESTORE ANY OTHER BUILDS ON MTD BUILDS
IF WANT TO GO BACK TO GB RESTOCK IS AGAIN NEEDED!!!
1)RESTOCK to gingerbread by following overcome method
www.teamovercome.net
2)flash the overcome kernel 4.0 to convert the system to ext4 from the above website
3)DOWNLOAD ANY ANY BUILD [OFFICIAL NIGHTLY OR SOMEONE ELSE BUILD]
4)copy the zip to tab and then reboot into recovery
5)wipe data,cache and dalvik cache
6) a) if MTD build once u flash them mtd zip it boots into mtd recovery and U HAVE TO FLASH THE ZIP AGAIN
b) if NON MTD just flash the zip
7)reboot!!!!
What doesnt work (19-04-2012-build)mtd
tv out
minors
external sd as sd-ext
gps (unconfirmed)
ums
Any chance of p1000l owners can have the TV mobile apk working? I've been trying to restore it with titanium and I have not been able to restore it.
By the way, anyone having low battery time?
Hatori28 said:
Any chance of p1000l owners can have the TV mobile apk working? I've been trying to restore it with titanium and I have not been able to restore it.
By the way, anyone having low battery time?
Click to expand...
Click to collapse
titanium backup not working on the build
The new update seems to eliminate the software keys; is there a way to reenable them?
Don t agree just wipe everything and restore user app with Tb. Works fine however i think it s a bad idea do such about system/data.
Sent from my GT-P1000 using XDA App
ronak.super said:
titanium backup not working on the build
Click to expand...
Click to collapse
If you haven't already done that, update your TB, the last version works on ICS.
I've been really enjoying this build. Thanks alot for the whole team!
UI runs very smooth and basicly no log at all.
Almost everything works better compared to the orginal 2.3.3 stock rom I used before.
Few things I noticed, the battery life seems to be somewhat worse.
Also a question about the multitasking in ICS. I cant find a way to open the thumbnails? Long pressing home doesnt seem to work and since theres no software based keys (which I think is a good thing) I'm not sure what to do.
Tab P1000 and I'm using the latest kerned (30.1) with bt fix and rom.
Medikay said:
The new update seems to eliminate the software keys; is there a way to reenable them?
Click to expand...
Click to collapse
in build prop set
setprop persist.tablet.hidehome 0
setprop persist.tablet.hiderecent 0
setprop persist.tablet.hideback 0
Graven-eof said:
I've been really enjoying this build. Thanks alot for the whole team!
UI runs very smooth and basicly no log at all.
Almost everything works better compared to the orginal 2.3.3 stock rom I used before.
Few things I noticed, the battery life seems to be somewhat worse.
Also a question about the multitasking in ICS. I cant find a way to open the thumbnails? Long pressing home doesnt seem to work and since theres no software based keys (which I think is a good thing) I'm not sure what to do.
Tab P1000 and I'm using the latest kerned (30.1) with bt fix and rom.
Click to expand...
Click to collapse
dude undervolt your settings using voltage control for better battery im getting the same battery which i used to get in gingerbread
ronak.super said:
in build prop set
setprop persist.tablet.hidehome 0
setprop persist.tablet.hiderecent 0
setprop persist.tablet.hideback 0
Click to expand...
Click to collapse
Sorry for the noob question...but how do you access that?
build.prop file /system/buil.prop
Sent from my HTC Desire using XDA App
Medikay said:
Sorry for the noob question...but how do you access that?
Click to expand...
Click to collapse
use root explorer go to system and then hold the build.prop and open in text editor
hit thanks
Hi all, this thread is a good idea, it mostly works on the galaxy s 2 cm9 forum but their are still idiots posting in the development area. Codeworx (the developer on s2 cm9 thread) has really bought into it and tells people to post in the discussion thread if they post noob stuff in the dev thread. If the devs here (cdesai, humberOS etc) buy into this discussion thread then maybe more people will use it
Anyways, i tried changing lcd density to 120 to check out more tablet apps on the market but when I do the keyboard zooms and I can only see half of it, so I can't type properly... Any ideas?
Sent from my GT-I9100 using Tapatalk
biffroy said:
Hi all, this thread is a good idea, it mostly works on the galaxy s 2 cm9 forum but their are still idiots posting in the development area. Codeworx (the developer on s2 cm9 thread) has really bought into it and tells people to post in the discussion thread if they post noob stuff in the dev thread. If the devs here (cdesai, humberOS etc) buy into this discussion thread then maybe more people will use it
Anyways, i tried changing lcd density to 120 to check out more tablet apps on the market but when I do the keyboard zooms and I can only see half of it, so I can't type properly... Any ideas?
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
set density to 160 it works fine becoz in 120 it becomes damn small and same the market page bcomes small when oriented horizontal
ronak.super said:
set density to 160 it works fine becoz in 120 it becomes damn small
Click to expand...
Click to collapse
I know that I used the honeycomb alpha at 120 and liked it that small. But my question isn't about the best density to have, it's about the keyboard at 120 and if anyone knows how to fix it or has any suggestions.
This is my GalaxyTab. There are many like it but this one is mine.
If, by some kind of freak occurrence I helped you, please hit THANKS!
my keyboard work fine on 120 check the attachment
It would be awsome if there is such way to force apps to start in tablet UI with 160 LCD density coz 120 is very small for 7" displays
CM9 on P1000
Hey guys, I tried to flash the latest ICS build for the P1000, but my tablet wont leave the start up screen...
I downloaded both files, replaced the kernel part of the zip with the one specific for the P1000, wiped cache, davik and reset user settings.
Then I flashed the zip file, but at reboot it won't leave the start up screen.
Any idea on what I may have done wrong?
Thanks!

New CM9 Nightly Builds for TF101

Hello people,
I was looking through the nightly builds on download.cyanogenmod.com
I saw a fresh build for TF101 dated for 2/27.
Check it out. I will flash it and see how it is.
Someone also needs to create an Official CM9 Nightly page in Dev section.
So who wants to be the Guinea pig? I'm already running that KANG that was posted up earlier this weekend. I may try it after I charge up.
yea...guinea pig here....goes through boot animation and then system ui and trebuchet (the launcher) fc...i would say stay away until some official announcement is made
Yeah. It doesn't even boot up probably. :-(... going back to stock
Sent from my Galaxy Nexus using XDA App
You have to start somewhere.
Now at least we have an official CM9 branch, which means someone is working on it
brzgw said:
Hello people,
I was looking through the nightly builds on download.cyanogenmod.com
I saw a fresh build for TF101 dated for 2/27.
Check it out. I will flash it and see how it is.
Someone also needs to create an Official CM9 Nightly page in Dev section.
Click to expand...
Click to collapse
ehm where from?
Edit: http://download.cyanogenmod.com/?device=tf101
Found IT ^_^
I got launcher force closes when i had an overclocked kernel with a stock rom. Gonna check this out a little later.
Sent from my Transformer TF101 using Tapatalk
I'm surprised that this news seems to be not generating much buzz here. Not knocking any of the other devs, because most of them do amazing work, but CM is the bee's knees. When those nightlies get semi-mature, I'll be running them and never look back. They've never done me wrong before. Any device I've ever had that was supported, was the best ROM available for my needs. YMMV, of course.
I think when its own thread is created youll see the buzz, cm rocks lol
Sent from my R800i using xda premium
I tried flashing it and got the same fc, the system ui and launcher. I tried it again but formatted system this time. Got the same results but was able to see the clock and tablet reboot options.
Guess it's not ready yet
shadrach47 said:
I tried flashing it and got the same fc, the system ui and launcher. I tried it again but formatted system this time. Got the same results but was able to see the clock and tablet reboot options.
Guess it's not ready yet
Click to expand...
Click to collapse
Yep, same here, even with wipe dalvik and fix permissions, FC´s :S
Let us wait for a new update....
Alas, I ran across this on get.cm also. Got excited and then had the FC issues like everyone else. At least it is a step in the right direction.
Don´t know if its related,
lost my wifi hability after trying this, anyone else?
it just won´t turn on :S
Was just about to try flashing it until I saw how many people were unsuccessful. Oh well, guess I'll wait until an official release.
ferreinf said:
Don´t know if its related,
lost my wifi hability after trying this, anyone else?
it just won´t turn on :S
Click to expand...
Click to collapse
Not sure if it's related or not but my wifi on a Kanged version of CM9 is acting weird, disconnecting and saying out of range.
I tried this one first but it could just be the ROM I'm on.
shadrach47 said:
Not sure if it's related or not but my wifi on a Kanged version of CM9 is acting weird, disconnecting and saying out of range.
I tried this one first but it could just be the ROM I'm on.
Click to expand...
Click to collapse
Ok got it to work again, had to use Super Wipe Lite from http://forum.xda-developers.com/showthread.php?t=1245892
after running the script flashed latest revolver and got wifi backup....
Same here, will try your suggestion below.
Edit: Had to run the wipe zip, reflash and boot into current rom and the restore a backup to get it working again. PITA But it works.
ferreinf said:
Don´t know if its related,
lost my wifi hability after trying this, anyone else?
it just won´t turn on :S
Click to expand...
Click to collapse
CM rocks
lollazzo said:
CM rocks
Click to expand...
Click to collapse
i would like to see MIUI V4 on tab, as it will be easier to port than 2.x was ^_^
New official CM9 nightly on get.cm. It boots!!! Gonna test it and report back in a bit.
EDIT1: Wifi works and was able to log into my Google account. Currently restoring my Titanium Backup and will test a bit more after that. Also, camera makes the tablet reboot on first launch, but works after that. Odd. More info to come.
EDIT2: Face unlock is there, but doesn't recognize my face, so I can't test it out. It couldn't recognize my face on my Nexus S 4G either. Maybe my face is just derped up. Anyway, there is nothing that I could tell that is broken. Even the MicroSD mounted with no issue. I don't have a keyboard dock to test it out, otherwise I would. Games and videos both work fine.

[DISCUSSION] - CM9 discussion thread

As I posted in the dev thread let's bring the chit chat into the general forum and keep the dev thread on topic and clear for people to help the devs move this rom forward.
So this thread is for all the GENERAL CM9 discussion.
Everybody suck
Sent from my GT-I9300 using xda premium
Informative.
Sent from my GT-I9300 using Tapatalk 2
Despite this, people will still go to the development thread to ask questions, request features, banal talks... etc.
Maybe use this thread to summarise FAQ's found in the other thread (and subsequently this thread)
Edit the first post to stay on top of things?
In summary, no exfat on CM9, use ext4 format if you must have files over 4Gb (that's all I know so far, I don't have CM9 installed yet)
*subbed*
Get xplod to put a link to this thread in the development OP? A link to that thread from here wouldnt hurt either
is there a way to block calls in cm9? (without having to install an apk from the market)
I don't have phone yet; however, was wondering if on cm9, do you still have the same camera function as with touchwiz, like fast burst, best shot, taking pic while recording? I don't really care about losing s voice.
jblazea50 said:
I don't have phone yet; however, was wondering if on cm9, do you still have the same camera function as with touchwiz, like fast burst, best shot, taking pic while recording? I don't really care about losing s voice.
Click to expand...
Click to collapse
Bot yet i think but soon u will have them al
Just wondering if anyone knew of a video player with live previews (in thumbnails) like the original one.
By the way great rom, I moved from Galaxy S II and was surprised to find it on the S III so fast.
own4d said:
Maybe use this thread to summarise FAQ's found in the other thread (and subsequently this thread)
Edit the first post to stay on top of things?
In summary, no exfat on CM9, use ext4 format if you must have files over 4Gb (that's all I know so far, I don't have CM9 installed yet)
Click to expand...
Click to collapse
Nice idea. Once I'm back from holiday on the weekend I'll get to work bringing all the known fixes, work arounds ,tweaks and tips into this thread. Would take an age doing it on the phone.
Still flashing nightly builds whilst away
Sent from my GT-I9300 using Tapatalk 2
P1n3apqlExpr3ss said:
*subbed*
Get xplod to put a link to this thread in the development OP? A link to that thread from here wouldnt hurt either
Click to expand...
Click to collapse
Will do.
Sent from my GT-I9300 using Tapatalk 2
Hey can any one extract the crt animation ( screen of &on) frm this rom & make a flashable zip file ?? Plzz Plzz
I want 2 use in my stock rom...
Plzz
Sent from my GT-S5570 using XDA
Ph3rOn!xX said:
Hey can any one extract the crt animation ( screen of &on) frm this rom & make a flashable zip file ?? Plzz Plzz
I want 2 use in my stock rom...
Plzz
Sent from my GT-S5570 using XDA
Click to expand...
Click to collapse
Next time try using Google..cuz thats what i did and it was the first link
http://forum.xda-developers.com/showthread.php?p=27549498
k786 said:
Next time try using Google..cuz thats what i did and it was the first link
http://forum.xda-developers.com/showthread.php?p=27549498
Click to expand...
Click to collapse
I don't think that's what he was looking for. And I'm not sure if you can just apply the crt animations from CM9 to stock ROM.
Has anyone managed to get MTP to work in OS X? Android file Transfer doen't detect device. Xplodwild said it works but not for me here!
sinkingfish said:
Has anyone managed to get MTP to work in OS X? Android file Transfer doen't detect device. Xplodwild said it works but not for me here!
Click to expand...
Click to collapse
If it's like on linux i guess you need to install an mtp library to get it working (i.e. mtpfs).
Tectas said:
If it's like on linux i guess you need to install an mtp library to get it working (i.e. mtpfs).
Click to expand...
Click to collapse
Android File Transfer worked fine on stock using PTP and works great with my friends Gnex. Googled mtpfs for OS X but nobody seems to have had any success.
Hope codeworkx & XpLoDWilD are able to get mass storage working.
Sent from my GT-I9300 using XDA
Would Android beam on CM9 work with S-beam? Ie someone on stock samsung rom uses s-beam to communicate with me on android bean, no issues?
Could we use NTFS on the 64Gb SD card on the GSIII using CM9?
If not.. could I somehow parition the microSD card into x2 32Gb partitions, one ext4 the other ExFAT that way I can run with this until one of the other prevails? I only like copying data once....

[ROM][ICS][P7310]P7510XABLPL_P7510UELPL clean port v2[2012-08-16]

This is a clean port of the US P7510 firmware that was released very recently.
For screenshot, go here: http://blog.apedroid.com/2012/08/official-ics-from-p7510-running-on-p7310.html
Downloads
Version 2: https://hotfile.com/dl/167367272/873eb0f/P7510XABLPL_P7510UELPL_for_P7310_v2.zip.html
Version 1: https://hotfile.com/dl/167139991/1ccdcd2/P7510XABLPL_P7510UELPL_for_P7310.zip.html
Changelog
Version 2 - Fixed low power mode charging animation. Changed all P7510 to P7310 in build.prop except fingerprint. Rooted out-of-the-box.
Version 1 - First release. The only things changed is kernel, kernel modules and one line added build.prop (to fix screen rotation).
Instructions
- Flash with Clockwork recovery (I use 6.0.0.8 from the CM9 thread but most versions should work).
- Remember to wipe!
- For me the first boot is with completely black screen but I can hear the boot sound. After a while it reboots and this time the screen is on and the bootanimation can be seen. No idea if it will do the same on all devices. Do not panic, just wait it and it should reboot (at least it does for me).
- Compass does not work correctly, likely due to the different screen rotation on our device but it never worked in official 3.2 anyway so I guess we're used to it not working.
- HDMI is 90 degrees rotated.
Everything done at your own risk, as usual...
Thanks you Very much!
Downloading Now
Will Give you feedback!
And i will make Video Review Lolz!
Love you kk!
chemicalbuz said:
Love you kk!
Click to expand...
Click to collapse
Haha Lolz
Thank you very much for this.I will try it .
very nice, will try it and give feedback soon. Did you use the 3.2 kernel or was it possible to modify it with the sources of the 10.1?
Ncyde47 said:
very nice, will try it and give feedback soon. Did you use the 3.2 kernel or was it possible to modify it with the sources of the 10.1?
Click to expand...
Click to collapse
I used the ICS kernel source (GT-P7510_ICS_Opensource_Update2.zip) from Samsung and compiled it using the supplied samsung_p5wifi_defconfig without doing any changes. Seems like all the p5/p5wifi bits are in place in the p4/p4wifi kernel source.
I've tried to keep it as clean as possible. I'm sure others will root, deodex and tweak it later.
I might do one for the P7300 using the italian P7500 firmware if time allows.
Video review: http://www.youtube.com/watch?v=goR5SAeJ9t0&feature=youtu.be
Btw, it should work to install this on a P7300 but 3G will not be available.
kallt_kaffe said:
Btw, it should work to install this on a P7300 but 3G will not be available.
Click to expand...
Click to collapse
may i tweak this rom?
safariking said:
may i tweak this rom?
Click to expand...
Click to collapse
Do whatever you want with it. I do not plan to tweak it myself, no time for that.
Nice to see the FFC works! Thanks KK for all your hard work!
Which languages are available?
kallt_kaffe
Very grateful for all your work and knowledge sharing for the gt8.9 7300/10.
Might be weeks for official Samsung ics, so this will be very popular, I predict
Stupid question: the screen shot indicates that device id is p7510. Would that confuse some apps, market, or CWM recovery, or flashable zips ?
Sent from my GT-P7300 using xda app-developers app
fred_be9300 said:
Stupid question: the screen shot indicates that device id is p7510. Would that confuse some apps, market, or CWM recovery, or flashable zips ?
Click to expand...
Click to collapse
I don't think it will be a problem. As I wrote before I tried to keep it as clean as possible only doing the bare minimum of changes needed. I'm sure we will soon see tweaked versions.
kallt_kaffe said:
Btw, it should work to install this on a P7300 but 3G will not be available.
Click to expand...
Click to collapse
Hi KK,
Would it be coming for P7300 as well someday?
Like your work on other ROM so far.
Thank you.
Sent from my GT-P7300 using XDA Premium HD app
Thanks. It would be good to have this one rooted and deodexed.
cnewsgrp said:
Thanks. It would be good to have this one rooted and deodexed.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=30254672#post30254672
Uploading Now!
hmmm... how does one root this rom?
UPDATED: lol...spoke too soon.
safariking said:
may i tweak this rom?
Click to expand...
Click to collapse
Please do. If you need a beta tester I'm all-in! I'm " " <-- this close to selling my Gtab89 and getting a Nexus 7 instead.
- Aaron

Categories

Resources