Related
Hello XDA-devs forums,
I'm having an issue since yesterday.
I have rooted my Huawei Ideos X5, and it ran fine for a day or so.
However, when my battery ran out it shut down into a completely blue screen.
When I tried booting it again, this just showed me a blue screen as well.
Now, I fixed this issue by connecting the phone to my PC after booting it with the Vol+ and Vol- pressed.
(So you get the pink/purple screen)
However, when I opened the phone on my PC, all I saw was a "239 MB" "empty" space, and it should have ~2GB..
I placed a backup copy I saved of my "image" folder in that 239 MB storage, and it booted.
However, today I hooked it up to my PC again to see if it magically changed..
And I couldn't access the 239 MB space anymore.
When I tried fixing the issue with a reboot of the phone, that just caused it to get stuck in a booting loop.
So now I'm stuck with a phone that keeps trying to boot itself,
and I can't access it on my windows PC.
I can, however, access 4 different folders of the phone on my linux notebook.
Now, my question is: can someone with a good understanding of problems like these please help me out?
I'm getting kind of fed up with it, as I've only got the phone for 2 days now.
Thank you in advance, and thank you for taking the time to read this.
Have you tried removing the battery for 5 minutes and then putting it back in?
After this, what happens when you press VOL+ and Power?
How about if you press VOL+, VOL- and Power, without the USB cable?
Hello Katu, thank you for posting.
Regarding your questions:
Yes, I have tried to take out the battery for 5+ minutes- it didn't change anything to the situation unfortunately..
If I press VOL+ and Power at the same time, the device boots into recovery mode.
In this I have tried to format the device in order to reset it to factory defaults, but this did not help either.
When I press VOL+, VOL- and Power, the phone boots into the pink/purple screen.
Can you try a custom recovery and a custom rom? I want to see if your onboard flash is borked.
u8800,cm7,[email protected]
I had the same when my phone got f*ucked up. Put the image folder, than download official rom, like b138 and install it. then check your imei. There is a change that it will be 0.
PlanDreaM said:
Can you try a custom recovery and a custom rom? I want to see if your onboard flash is borked.
u8800,cm7,[email protected]
Click to expand...
Click to collapse
Well, I used an original ROM:
U8800 V100R001C00B136(Overseas General version)
And that resulted in the boot.img being corrupted, so I can't even overwrite that anymore.
Also, this is what I see when I hit VOL+, VOL- and Power at the same time to boot into safe mode, and connect it to my PC.
img69 [dot] imageshack [dot] us/img69/244/10101191548pm.png
julle131 said:
I had the same when my phone got f*ucked up. Put the image folder, than download official rom, like b138 and install it. then check your imei. There is a change that it will be 0.
Click to expand...
Click to collapse
I installed the official B136 rom, and after it rebooted, it would just hang on a black screen.
(it used to show the IDEOS or Android logo when it booted)
Hmm mine came with this Rom
U8800 V100R001C00B135SP01 ( general )
Looking at your name you're from the Netherlands ( so am I )
where did you get this 136 version from ?
I would try to put this one on it
You have to put the 'dload' folder into the root of your SD Card,
then boot into boot-loader, after that it'll automatically flash back to the stock Rom.
1 Format SD card
2 On the SD card, create "dload" folder
3 Put the unzipped Rom into "dload" folder
4 Then boot to bootloader (pink screen)
Yes, mine came with that version as well.
However, I couldn't find it anymore and thus downloaded the version I said earlier.
Also, I did everything as you described, except step 4.
You have to boot to recovery instead of bootloader. (VOL+ and Power)
Anyways, I managed to get ClockworkMod's recovery.img on my phone,
and from there on install a custom ROM on the phone, which magically got it working again - even though it didn't work earlier.
Thank you for reading my thread and taking the time to reply to it.
My issue has been resolved.
just for the record, flashing a stock rom is different from flashing a custom rom..
the 4 steps described by Gman2oo6 is the correct way to flash a stock rom (and it is written clearly in the document that is in the stock rom zip file)
[edit]
step (1) is not a necessary step though..
Yeah, I noticed that.
What I did was format my SDcard with FAT32,
and put a custom rom (update.zip) on the SDcard.
I then booted ClockworksMod Recovery and installed the custom rom from the SDcard.
When I tried installing the stock rom, I just followed the PDF file's instructions that came with the stock rom.
hey i udated to GB 2.3.4 (official)and i didnt like the it cuz the wifif ddnt work and the bluetooth also the DATA so itryed to downgrade to 2.2.2 original official and it did the 2/2 steps intalled and when it restarted it did not want to turn on all that happened was it vibrated and thats all so i left it on like that and when the battery died i plugged it in to the AC and the LED turned on red and the touch kkeys also but not the screen so i really NEED help!
Try to turn it on with lead connected but no battery and see if you can start it.
My battery also went dead flat this morning and I couldn't get it started at all till I tried this. Once I got it started the only thing I could do was quickly pop in the batery and let it charge. Just leave off the cover till you get it going.
I have to add that I did not have the problem of a failed update to deal with but it may at least get you started
i tryed it
nope nothin good happened all that happens is a blank screen with nothin on ,LED is off and the touch keys are off. it justz vibrates and when i put the battery it turn the LED on to red and the touch keys turn on but then like 5 min later the LED and keys turn off
astewart said:
Try to turn it on with lead connected but no battery and see if you can start it.
My battery also went dead flat this morning and I couldn't get it started at all till I tried this. Once I got it started the only thing I could do was quickly pop in the batery and let it charge. Just leave off the cover till you get it going.
I have to add that I did not have the problem of a failed update to deal with but it may at least get you started
Click to expand...
Click to collapse
ok heres what i did i wanted to upgrade my phone to the newest version GB 2.3.4.So what i did was download the update and i followed the installation steps i successfully updated to Gb 2.3.4. so like i was checking how it look and the new feature but when i wanted to go on the android market i went to setting and turn on the wifi and it said Error and then i tried the Bluetooth and it said Error also so then i put my SIMs card in and i was like imma use DATA then and when i restarted my phone it had service but no HSPA+ or Edge or GPRS so like i just hatted my phone from their so then i was trying to root it but iddnt know how to do that so like i read this website and i got the UPDATE.APP or 2.2.2 AT&T did the same steps of the installation of BG 2.3.4 and it went to the process and 1/2 stepp good it passed and then 2/2 also passed it installed it and when it said Successively Installed it said Restarting and the scrren turn of and it vibrated and thats all that happened and i left it like that for the whole days and nothing happened
Do u got any idea?
When i connect it to my laptop it says installing drivers .then its says sucesfully installed drivers ready to use. so then i got to Device Manger and i check what has been installed and their it said USB Human interface device and HID-compliant device WHAT DOES THAT MEAN??
Not sure about the HID (human interface device) probably just the way windows sees the device for interfacing with it. With regards to the not booting I have read a lot of people saying that you need to factory reset and clear cache after the upgrade/downgrade. With the phone off, turn it on by long pressing volume+ and power on button till you get the blue recovery screen and from there you can reset factory/ data and also clear the cache. from what I see this should clear up the problem and start up. Please read this thread, it may help you somehow..... http://forum.xda-developers.com/showthread.php?t=1420728
Hope this helps a little
U mean Boot recovery and imma try it and thanks ill check it out
Sent from my MB300 using XDA App
all that i know is that if u customized your partition, it'll bootloop,
so go back to stock-partition ^^
How do I do that got like the steps or video?
Sent from my MB300 using XDA App
when i downgraded to 2.2.2 i installed this V100R001C00B138SP04CUSTC185D002
http://forum.xda-developers.com/showthread.php?t=1251250 got it from that link
Looks like you are not having much luck. Did you try to factory reset?
astewart said:
Looks like you are not having much luck. Did you try to factory reset?
Click to expand...
Click to collapse
well how do i do that do i need to got to the purple/pink screen or bot recovery cuz i cannot access that my phone doesn't do anything pretty much
Hello,
This morning I tried to root my phone so that I can force everything to be moved to a sd card since the storage of the system is low not enough to install apps and to install A mod that is more updated then the current GingerBread OS.
I managed to soft brick the device the rom clearly said e405 obviously the developer has a few bugs anyway I manage to recover from my soft brick by A software 'KDZ' Only issue I have now is when I press volume up on boot I get A notice icon trying to say something (image of the icon is attached below) and when I use ROM Manager to reboot to recovery it will attempt to go there, Instead of going to recovery it goes to A loading page then this erases all my data/apps except SuperUser/Root.
Tried everything and it still does it?
When I use the LG Emergency Software it just goes to a page saying not responding??
Any help and ideas would be grateful so I can fix this issue and move on also im mostly A samsung user and im fairly new to lg.
See thee error message below
Once i get the idea of what the icon is actually trying to say I should be in the right direction.
Thanks,
Spudster
umm
Anyone??
Spudster1 said:
Anyone??
Click to expand...
Click to collapse
Perhaps you can go to ROM Manager, uninstall Recovery, then re-install it?
I don't really know. I'm sorta new to this stuff.
hard reset
Spudster1 said:
Hello,
This morning I tried to root my phone so that I can force everything to be moved to a sd card since the storage of the system is low not enough to install apps and to install A mod that is more updated then the current GingerBread OS.
I managed to soft brick the device the rom clearly said e405 obviously the developer has a few bugs anyway I manage to recover from my soft brick by A software 'KDZ' Only issue I have now is when I press volume up on boot I get A notice icon trying to say something (image of the icon is attached below) and when I use ROM Manager to reboot to recovery it will attempt to go there, Instead of going to recovery it goes to A loading page then this erases all my data/apps except SuperUser/Root.
Tried everything and it still does it?
When I use the LG Emergency Software it just goes to a page saying not responding??
Any help and ideas would be grateful so I can fix this issue and move on also im mostly A samsung user and im fairly new to lg.
See thee error message below
Once i get the idea of what the icon is actually trying to say I should be in the right direction.
Thanks,
Spudster
Click to expand...
Click to collapse
I saw that icon after flashing back to stock rom with KDZ and a hard reset worked for me. Pull the battery, make sure you not connected to USB or charger, then press and hold home key and down volume while you press power on. Release power when you see LG logo, hold the down and home for a while until you see android unpacking a box. It takes about a minute to see this, so you gotta wait for it. The phone reboots or shut downs, don't rememberwhich
reply
kurtstraker said:
I saw that icon after flashing back to stock rom with KDZ and a hard reset worked for me. Pull the battery, make sure you not connected to USB or charger, then press and hold home key and down volume while you press power on. Release power when you see LG logo, hold the down and home for a while until you see android unpacking a box. It takes about a minute to see this, so you gotta wait for it. The phone reboots or shut downs, don't rememberwhich
Click to expand...
Click to collapse
Ok I will try that and let you know if it works in a few hours I gave the phone to my brother for free since I bought A samsung (used to samsungs and love then
Anyway should also mention that when I try to reboot into recovery with rom manager it reboots goes to the loading box thing then it wipes my data Like i said I tried that method in a few hours and get back to you here.
nope
didn't work ;.(
Man go to the screen u have posted the images above , then use KDZ to flash back Man!
This is "DIAG MODE" so select it in KDZ program
So select KDZ file ( download if u have tried urs so far)
No error .. when u click to start upgrade ur phone will apper in emergency mode. Then the KDZ will flash flawslessly
Sent From ... Lg e400 <-- {[Brasilian Here]}
Still didnt work it flash though but still didnt fix the recovery..
These lg are actually useless a simple firmware flash should do the job.
LG staff are also rude to be honest rang up and because I tried to root and I was doing the right thing going back to stock they denied support and hang up without me giving A reply. Glad ive switched back to samsung s4 and Apple IPhone 5C.
Thanks for attempting to help :.)
Hi guys, I have a ATT D800 that was having problems where my phone would freeze during use and go into a bootloop, where I could occasionally get the phone to turn on from said bootloop. So I restored to stock using the lgflashtool application. After restoring I continued to freeze and enter bootloop. I found a suggestion of factory resetting the device after restoring, that has done nothing, I still enter a bootloop after about 30-45 minutes of use. Sometimes it lasts longer, sometimes it doesn't. I couldn't find any answers on this issue, and i definitely don't want to just wright off my phone as broken and ust leave it at that. I really want help, and any of your suggestions are welcome. I don't know if any of you have had this problem before, but if you have please help me. Ive tried restoring from lgflashtools about 4 times to no avail.
Thanks.
Jus Questions
When u flash r u on COM port 41?
Kinda to me sounds like u maybe using the port that the computer randomly throws up & jus to cover bases r u holding the vol up button to Enter Download Mode ? And @ the very end of flash watch the screen it will tell u to POWER OFF I think r u? Cuz I made a few mistakes and it didnt pass a few times idc bout my warranty but the last time I flashed it PASS'D
Ill try n help ya the best!
I am currently tryn to jack my build.props to really no avail!
Ickyz said:
When u flash r u on COM port 41?
Kinda to me sounds like u maybe using the port that the computer randomly throws up & jus to cover bases r u holding the vol up button to Enter Download Mode ? And @ the very end of flash watch the screen it will tell u to POWER OFF I think r u? Cuz I made a few mistakes and it didnt pass a few times idc bout my warranty but the last time I flashed it PASS'D
Ill try n help ya the best!
I am currently tryn to jack my build.props to really no avail!
Click to expand...
Click to collapse
Im using COM 41, I enter download mode and the device pulls through and reboots taking me to the original setup screen. I havent jist powered it off though, although i dpnt believe i was ever prompted to do so.
hmm
allurbase said:
Im using COM 41, I enter download mode and the device pulls through and reboots taking me to the original setup screen. I havent jist powered it off though, although i dpnt believe i was ever prompted to do so.
Click to expand...
Click to collapse
Try flashing the other Version there's a Build o, & build d, if ur stuck in a bootloop it would almost be worth romming something else Right?
Jus to see if it works
agreed
Ickyz said:
Try flashing the other Version there's a Build o, & build d, if ur stuck in a bootloop it would almost be worth romming something else Right?
Jus to see if it works
Click to expand...
Click to collapse
I completely agree man, i thought of that but i havent dpne it yet. Ill tey that when i get home tonight and let you know how it turns out. Thanks for your advice, i really appreciate it.
I noticed
I Believe i figured out yer problem!
Were u trying to boot in2 recovery with Rom Manager to TWRP and now ur phone is sorta bricked
HOLD the POWER button until u see the LG screen keep holding phone will restart will b slow soon as it restart POWER off & restart Phone in DOWNLOAD Mode!
Im havin this issue for H*** WITH 4.4 KITKAT
Ugh.
Every time I try restoring to stock it get to 80 percent on the computer and boots me up and tells me that there is a Factory Reset Flag Check fail at the very end.... Tried to factory reset whilst it was still lading, didn't do anything, still freezes up. also tried simply restarting the phone. Nope.
So i just got the official update on my phone , i downloaded it over WiFi and let it install , It came up with optimising apps and i let it continue and then it rebooted ,
However it is stuck in this Booting sequence . It boots into my home screen then 3 seconds and it reboots again and goes to home screen and then reboots again - constantly .
I have now taken battery out and posted here to see if i can get some help in fixing this .
its not rooted or anything like that , its a normal stock android .
Thanks
Dan
No need to panic. I assume yours is the 9500 variant. But i cant guarantee the data in your phone. I even dont know the data retrieval procedure since you say that your phone is unbootable .
If you already have your contacts , messaging and others which can be backed up to google servers, backed up then you dont need to worry, you know...
The steps i provide you is only an outline and you have to read in depth in this forum..
Just enter recovery mode of the phone and select wipe. Refer this forum for detailed
Your phone will be back to working condition i suppose. If it is so, then dont just stop with that. Use ODIN to flash the ROM downloaded which is around 1.5gb to your phone by following the steps . You can get the ROM as well as ODIN by the links provided in this forum itself.
Detailed steps are available in this forum and they are exhaustive so i need not tell more.
Good Luck.
dan44762000 said:
So i just got the official update on my phone , i downloaded it over WiFi and let it install , It came up with optimising apps and i let it continue and then it rebooted ,
However it is stuck in this Booting sequence . It boots into my home screen then 3 seconds and it reboots again and goes to home screen and then reboots again - constantly .
I have now taken battery out and posted here to see if i can get some help in fixing this .
its not rooted or anything like that , its a normal stock android .
Thanks
Dan
Click to expand...
Click to collapse
Hello dude. The best option you have to do is this:Turn off your phone. Press volume up+the power button in the same time and voila!!! You will be in the recovery mode in no second.
After that choose the "factory reset/wipe" option (i am not sure about the title) and press yes.I think that might help you. But be careful, you will lose all your installed apps and maybe some data like contacts... It's your choice!
Cpsil said:
Hello dude. The best option you have to do is this:Turn off your phone. Press volume up+the power button in the same time and voila!!! You will be in the recovery mode in no second.
After that choose the "factory reset/wipe" option (i am not sure about the title) and press yes.I think that might help you. But be careful, you will lose all your installed apps and maybe some data like contacts... It's your choice!
Click to expand...
Click to collapse
Yes i managed to get into recovery and i factory reset it . Thankfully all my data is synced with google (their not all bad lol ) and it booted up just fine , ran through setup and now i am installing all my apps again .
Rather ten minutes of going through all this than having a bricked phone.
Thanks for the help .
You can also first try to just wipe the cache in the recovery.
Remember that performing a full wipe in the normal recovery also wipes your internet storage.
If you don't want that, then flash a custom recovery and then wipe.
My note 3 n9005 international model is stuck in a loop trying to go into recovery mode every time.
The sequence goes as such:
- The phone vibrates and the screen shows a glimmer in the bottom of the screen, it goes away in a split sec.
- The phone proceeds to vibrate once again and after 2-3 seconds the phone boots up with the note 3 and such stuff.
- Up in the left hand corner it says: RECOVERY BOOTING. .... (dark blue text). Next line is: RECOVERY IS NOT SEANDROID ENFORCING (red text). Next line is: Set Warranty Bit: recovery (yellow text)
- The phone then turns off and wait for around 9-10 seconds and then the three steps above go into repeat again and again.
The only thing that stops this is pulling out the battery which i have done several times now ...
I have tried the two "Famous" key combinations AKA. Home + Power + Volume up or Volume down
but none of them seem to have any effect .. only thing that happens is that the "3-step process mentioned" now has a delay of about 15 seconds to continue instead of waiting only 10 seconds which i presume means that it turned off at some point really quick and then turned back on to begin the loop again.
Now for the cause of this mayhem:
I was trying to install a custom rom(Darklord Note 5 rom that converts your note 3 into a note 5 software) in which a Aroma installer was involved, but my TWRP recovery went into a freeze once it was trying to open up the aroma installer, i got out of this situation fairly easy by pressing the Home + Power button to turn it off and then proceeded to go into recovery and then reboot which went smoothly. But i really needed to change into this other rom since my current rom is terribly slow(CM 12.1). SO, i went around the net and found out that the aroma installer freezing was a common problem for certain versions of TWRP.
So i tried installing an earlier version (2.6.70 i believe) on top of the other one using an app called "flashify" .. which i believe is the source of this problem since it probably couldn't overwrite my current version of TWRP. And as such im now stuck in this devilish loop which is a pain in the arse.
P.S Overwriting from Clockword mod recovery 3.X to TWRP 3.X went smootly and there were no issues there .. so i guess the downgrading of the TWRP is the problem ??
I hope this is not such a seldom occurrence that you have no experience in which you can help me :-/
Please help me with this !
It might not be the only solution but when I've previously got the boot loops I've had to reinstall a stock rom from Sammobile and then root again and reinstall TWRP and then reinstall my chosen ROM using TWRP. You might loose data if you did not Nandroid backup
I can't do any of those things
samesung said:
It might not be the only solution but when I've previously got the boot loops I've had to reinstall a stock rom from Sammobile and then root again and reinstall TWRP and then reinstall my chosen ROM using TWRP. You might lose data if you did not Nandroid backup
Click to expand...
Click to collapse
Hi, it seems i haven't made myself clear enough ... i've tried the 2 key combinations as mentioned in the post .. but none of them have any special effect .. i have no way to boot into recovery mode or download mode.
So without download mode i have no way of using ODIN to reinstall stock firmware .. i am aware of how to use ODIN so if the download mode worked this whole thing would not be an issue for me since i could just do what you said in your reply.
But the problem is that it doesn't work ... so i dont know how to get into the phone and do stuff to fix it.
Also, i dont care about data such as photos and stuff ... the only thing i care about is my phone getting fixed!
Hope you can help or maybe someone you know for me
Florint45 said:
My note 3 n9005 international model is stuck in a loop trying to go into recovery mode every time.
The sequence goes as such:
- The phone vibrates and the screen shows a glimmer in the bottom of the screen, it goes away in a split sec.
- The phone proceeds to vibrate once again and after 2-3 seconds the phone boots up with the note 3 and such stuff.
- Up in the left hand corner it says: RECOVERY BOOTING. .... (dark blue text). Next line is: RECOVERY IS NOT SEANDROID ENFORCING (red text). Next line is: Set Warranty Bit: recovery (yellow text)
- The phone then turns off and wait for around 9-10 seconds and then the three steps above go into repeat again and again.
The only thing that stops this is pulling out the battery which i have done several times now ...
I have tried the two "Famous" key combinations AKA. Home + Power + Volume up or Volume down
but none of them seem to have any effect .. only thing that happens is that the "3-step process mentioned" now has a delay of about 15 seconds to continue instead of waiting only 10 seconds which i presume means that it turned off at some point really quick and then turned back on to begin the loop again.
Now for the cause of this mayhem:
I was trying to install a custom rom(Darklord Note 5 rom that converts your note 3 into a note 5 software) in which a Aroma installer was involved, but my TWRP recovery went into a freeze once it was trying to open up the aroma installer, i got out of this situation fairly easy by pressing the Home + Power button to turn it off and then proceeded to go into recovery and then reboot which went smoothly. But i really needed to change into this other rom since my current rom is terribly slow(CM 12.1). SO, i went around the net and found out that the aroma installer freezing was a common problem for certain versions of TWRP.
So i tried installing an earlier version (2.6.70 i believe) on top of the other one using an app called "flashify" .. which i believe is the source of this problem since it probably couldn't overwrite my current version of TWRP. And as such im now stuck in this devilish loop which is a pain in the arse.
P.S Overwriting from Clockword mod recovery 3.X to TWRP 3.X went smootly and there were no issues there .. so i guess the downgrading of the TWRP is the problem ??
I hope this is not such a seldom occurrence that you have no experience in which you can help me :-/
Please help me with this !
Click to expand...
Click to collapse
Hmm awkward, maybe you have hard bricked it? Idk maybe
MrHollywood said:
Hmm awkward, maybe you have hard bricked it? Idk maybe
Click to expand...
Click to collapse
Hmm, in the case of an hard brick .. what so you suggest i do ?
Do i go to the store to get it fixed. (my warranty actually expired 1 month ago) and in the case of needing such a fix .. how much do you think it would cost ?
Or do i wait for a solution from some guy on this page ?
Florint45 said:
Hmm, in the case of an hard brick .. what so you suggest i do ?
Do i go to the store to get it fixed. (my warranty actually expired 1 month ago) and in the case of needing such a fix .. how much do you think it would cost ?
Or do i wait for a solution from some guy on this page ?
Click to expand...
Click to collapse
First I would Google a solution, second I would wait about a week, who knows there might be a guy here who knows how to fix it, third of all and the end of all choices is to get it to a store, idk it might cost you at around 50-60 dollars. I once hardbricked my LG and they charged me 50 dollars. Let's hope your issues gets fixed without losing a lot of money.
MrHollywood said:
First I would Google a solution, second I would wait about a week, who knows there might be a guy here who knows how to fix it, third of all and the end of all choices is to get it to a store, idk it might cost you at around 50-60 dollars. I once hardbricked my LG and they charged me 50 dollars. Let's hope your issues gets fixed without losing a lot of money.
Click to expand...
Click to collapse
" Hard-bricked – it refers to the phone as totally jammed, unresponsive or no visible signs of starting to work as it suppose to be. No display at all. You can’t even access the Download Mode screen. The only resolution for this is by using the method called JTAG flashing, which is you are forcing to install the firmware back to the phone. The process that you are about to experience is not too easy; this includes disassembling the phone, some soldering job required and flashing by means of using a flashing device tool.
– This method means that you cannot save your device at all by yourself anymore. If you considered necessary to have your Samsung Galaxy Note 3 back to life, the best way for you to do is to bring the device back to your dealer. Explain impressive that might persuade them to have your Galaxy Note repair for free of charge or have an exchange for warranty. "
The process explained afterwards involves "download mode" which i can't access ... so yeah .. guess il'l wait for a bit for a response that might help me .. otherwise ... il'l just take it to the store i guess !
also .. what do you think about this part: " bring the device back to your dealer. Explain impressive that might persuade them to have your Galaxy Note repair for free of charge or have an exchange for warranty" ?
do you think it means explaining it to the dealer in detail what has happened .. or does it perhaps mean to act like a total fool and be like ; " umm .. is this supposed to be like this ?"
Hope you understood that one better than i, cause if i can get a free fix il'l be real happy !
Florint45 said:
" Hard-bricked – it refers to the phone as totally jammed, unresponsive or no visible signs of starting to work as it suppose to be. No display at all. You can’t even access the Download Mode screen. The only resolution for this is by using the method called JTAG flashing, which is you are forcing to install the firmware back to the phone. The process that you are about to experience is not too easy; this includes disassembling the phone, some soldering job required and flashing by means of using a flashing device tool.
– This method means that you cannot save your device at all by yourself anymore. If you considered necessary to have your Samsung Galaxy Note 3 back to life, the best way for you to do is to bring the device back to your dealer. Explain impressive that might persuade them to have your Galaxy Note repair for free of charge or have an exchange for warranty. "
The process explained afterwards involves "download mode" which i can't access ... so yeah .. guess il'l wait for a bit for a response that might help me .. otherwise ... il'l just take it to the store i guess !
also .. what do you think about this part: " bring the device back to your dealer. Explain impressive that might persuade them to have your Galaxy Note repair for free of charge or have an exchange for warranty" ?
do you think it means explaining it to the dealer in detail what has happened .. or does it perhaps mean to act like a total fool and be like ; " umm .. is this supposed to be like this ?"
Hope you understood that one better than i, cause if i can get a free fix il'l be real happy !
Click to expand...
Click to collapse
Yeah wait for a while. And what he meant was to lie lol to say you didn't do anything and somehow your device died, but unfortunately that only works when you have a warranty.
---------- Post added at 10:12 PM ---------- Previous post was at 10:03 PM ----------
Florint45 said:
My note 3 n9005 international model is stuck in a loop trying to go into recovery mode every time.
The sequence goes as such:
- The phone vibrates and the screen shows a glimmer in the bottom of the screen, it goes away in a split sec.
- The phone proceeds to vibrate once again and after 2-3 seconds the phone boots up with the note 3 and such stuff.
- Up in the left hand corner it says: RECOVERY BOOTING. .... (dark blue text). Next line is: RECOVERY IS NOT SEANDROID ENFORCING (red text). Next line is: Set Warranty Bit: recovery (yellow text)
- The phone then turns off and wait for around 9-10 seconds and then the three steps above go into repeat again and again.
The only thing that stops this is pulling out the battery which i have done several times now ...
I have tried the two "Famous" key combinations AKA. Home + Power + Volume up or Volume down
but none of them seem to have any effect .. only thing that happens is that the "3-step process mentioned" now has a delay of about 15 seconds to continue instead of waiting only 10 seconds which i presume means that it turned off at some point really quick and then turned back on to begin the loop again.
Now for the cause of this mayhem:
I was trying to install a custom rom(Darklord Note 5 rom that converts your note 3 into a note 5 software) in which a Aroma installer was involved, but my TWRP recovery went into a freeze once it was trying to open up the aroma installer, i got out of this situation fairly easy by pressing the Home + Power button to turn it off and then proceeded to go into recovery and then reboot which went smoothly. But i really needed to change into this other rom since my current rom is terribly slow(CM 12.1). SO, i went around the net and found out that the aroma installer freezing was a common problem for certain versions of TWRP.
So i tried installing an earlier version (2.6.70 i believe) on top of the other one using an app called "flashify" .. which i believe is the source of this problem since it probably couldn't overwrite my current version of TWRP. And as such im now stuck in this devilish loop which is a pain in the arse.
P.S Overwriting from Clockword mod recovery 3.X to TWRP 3.X went smootly and there were no issues there .. so i guess the downgrading of the TWRP is the problem ??
I hope this is not such a seldom occurrence that you have no experience in which you can help me :-/
Please help me with this !
Click to expand...
Click to collapse
Cheer up! Well not that much lol, I found a video that MIGHT be able to help you.
https://youtu.be/D2LZri5HT1E
Check it out and I am here if you want to ask some questions!
Maybe a USB jig will force the phone into download mode?
MrHollywood said:
Yeah wait for a while. And what he meant was to lie lol to say you didn't do anything and somehow your device died, but unfortunately that only works when you have a warranty.
---------- Post added at 10:12 PM ---------- Previous post was at 10:03 PM ----------
Cheer up! Well not that much lol, I found a video that MIGHT be able to help you.
https://youtu.be/D2LZri5HT1E
Check it out and I am here if you want to ask some questions!
Click to expand...
Click to collapse
It seems like we'll have to go with MIGHT since i just idetified it as being a stage 2 hard brick, i must have fiddled with it a little too much ... Hmm, the phone was getting old anyways and performance was faltering by the minute too. So i guess il'l check it out at the store if they can repair it for something like 50$ - 100$ .. otherwise, i guess il'l get myself a ****ty phone for now and wait for a new flagship smartphone to appear !
I was thinking about going for LG G5 .. good idea ? or do you have another suggestion
audit13 said:
Maybe a USB jig will force the phone into download mode?
Click to expand...
Click to collapse
Do you suggest buying one or making one myself (i found some guides about it ) .. which one do you think would perform best ? (assuming i make mine correctly)
Whether you make or buy doesn't matter as long as it does the job. I will say that a pre made jig is small and neat.
samesung said:
It might not be the only solution but when I've previously got the boot loops I've had to reinstall a stock rom from Sammobile and then root again and reinstall TWRP and then reinstall my chosen ROM using TWRP. You might loose data if you did not Nandroid backup
Click to expand...
Click to collapse
hey in same position and want to do exactly as you mentioned,start from scratch again which infact i dont mind at all..problem is im unsure of how to do it as all i can get w h en trying all else button combo's battery pulls etc is the start screen of twrp that just loops ..
thanks in advance for reading this
give a try with Kies 3
connect your phone with pc and open kies. there you see "phone recovery guide". click on it and it will try to reinstall the whole firmware and bootloader etc. screenshot attached
I believe kies has been replaced with smart switch.
audit13 said:
I believe kies has been replaced with smart switch.
Click to expand...
Click to collapse
if i may ask what is a jig???i ive seen something mentioned a few times briefly in tutorials suggesting to use one and im running out of options.tried samswitch and kies and phone wont connect..furthest i can get is when booting to recovery it loops at opening Twrp screen and it wont go to download mode..any help greatly appreciated
A USB jig is a small device that will force the phone into download mode.
https://www.xda-developers.com/need-a-samsung-usb-jig-build-your-own/
audit13 said:
I believe kies has been replaced with smart switch.
Click to expand...
Click to collapse
smart switch will not detect note 3 as it is developed for new devices like note 5 and onwards.
My note 3 and s4 worked with smart switch.
audit13 said:
My note 3 and s4 worked with smart switch.
Click to expand...
Click to collapse
ok. thanks for guidance. i will try it.