Flashing the official gingerbread in u8800 its irreversivel process, at least for now.
If you flash it you have to keep it as no way of going back.
If you root it using the only available method, bye bye!
Everytime you reboot the endless bootlooping starts and the only way to stop it is formatting data.
Which means everytime you reboot = bye bye all data and apps etc.
I think is something that its major importance and no one is mentioning this!!!!
I don't know, maybe I've been preaching to deaf ears or something...but...you can re-install the old ROM back, the CWM recovery won't work with the official GB - that much is true - but you will be able to downgrade to an official 2.2.2 (I used the B162) version with the regular update method (at least I was and everything is working just as normal as it used to).
So, irreversible - I don't think so
with the current CWM recovery - it's a no-go
edit: that being said, what works for me, doesn't necessarily work for everyone, so be careful and blame the guy in the mirror -not me, if it doesn't work for you. =)
I think Huawei says wrong here. I flashed 2.3 yesterday. After that, because of the haptic issue I flashed back to official 2.2. Only problem after the 2.2, recovery console had opened. I did factory reset there and phone started without a problem. Then, I had upgraded to 2.3 again. Still haptic don't vibrate. Other than, no problem here. Maybe, I will go back again to 2.2.
Well you are lucky then because you are the only one.
Perhaps what is saying in the official intructions that will be impossible to dowgread after this upgrade won't apply to you.
I have try it with at least 8/9 versions of official release and nothing works!!!!
what 2.2 version is that and you did it after or before rooting?
Have you tried with internal sd? I copied dload folder to internal and started the upgrade process from Storage-Upgrade Firmware. Where did your phone stuck?
Edit: I didn't root my phone. Waiting proper solution. I had used B138.
no, I'm using external SD.
now I'm downloading another official release to try to downgrade using another one...
this time is U8800 V100R001C17B162CUSTC17D001
Druida69 said:
Well you are lucky then because you are the only one.
Perhaps what is saying in the official intructions that will be impossible to dowgread after this upgrade won't apply to you.
I have try it with at least 8/9 versions of official release and nothing works!!!!
Click to expand...
Click to collapse
Well, like I said, what works for me doesn't necessarily work for you.
Anyway, this is what I did and it worked, maybe it can help others.
0. Copy the original B162 ROM ("dload"-folder which has two files, UPDATE.APP AND UPDATE_CUST.APP) to the root of your SDCARD
1. Update to B162 by holding down +- keys while turning on the phone
2. After the first reboot, it's giving error messages for not being able to mount this and that...just ignore it and...
--> Wipe data / factory reset --> remove battery
3. Update the B162 again --> this time everything should go OK, if so, your phone is back to stock B162 and you're ready to use it or update a custom rom (just install Clockwork recovery like you used to and start from there)
The last point (3) may be unnecessary, but I did so just to make sure everything's ok.
Edit: OK, and I meant b162, not b160...
Druida69 said:
no, I'm using external SD.
now I'm downloading another official release to try to downgrade using another one...
this time is U8800 V100R001C17B162CUSTC17D001
Click to expand...
Click to collapse
For me it also works. I have downgrade without any problem and I use to the b 162 version. Now Ian back to oxygen
Sent from my u8800 using XDA App
yes I made it with this B162.
**** this **** I'm going back to custom rom.
No point of using this official release if future customs will use the libs from this one.
Druida69 said:
yes I made it with this B162.
**** this **** I'm going back to custom rom.
No point of using this official release if future customs will use the libs from this one.
Click to expand...
Click to collapse
And then there's the fact that the official gb is still beta, it's not supposed to work perfectly. But as long as the dev team here stays active, I think that I'm gonna stick with custom roms too.
ho my god.
didn't work.
is always booting into recovery
I am stuck here also (
Nothing worked
I tried clockwork recovery - it doesnt get to. It is just rebooting.
I tried with various dload UPDATE.IMG's (GB Overseas, GB orig chinese,B162,B138) nothing is working - stucked in "Step 1/2 Unpacking" window forever.
Anyone has solution for this ?
Two weeks ago I've flashed the U8800Pro version - real mistake
I've started a topic here:
http://forum.xda-developers.com/showthread.php?t=1327715
katu2006 and on the second page flibblesan gave me a method to start my phone working well.
Post #4, #11 and #13.
Maybe this will help you,too?
sbasil said:
Anyway, this is what I did and it worked, maybe it can help others. (...)
Click to expand...
Click to collapse
You sir are a LEGEND. My phone "lives" again! On CM7 again...
manage to install miui.
several versions now up to the newest one.
I noticed on all of them that it mount the SD card when connected to USB but only shows the system files and not allow writing, copy, cut, etc.
Saying that I dont have permission to change the SD
Druida69 said:
Flashing the official gingerbread in u8800 its irreversivel process, at least for now.
If you flash it you have to keep it as no way of going back.
If you root it using the only available method, bye bye!
Everytime you reboot the endless bootlooping starts and the only way to stop it is formatting data.
Which means everytime you reboot = bye bye all data and apps etc.
I think is something that its major importance and no one is mentioning this!!!!
Click to expand...
Click to collapse
I have just flashed with new U8800V100R001C00B517G001(Beta1.0)(Overseas Normal)(Gingerbread) but after flashing I kept waiting for start my phone. I restasted many times but same, then I format data its worked and when restarted again it goes in same condition any help ?
until flash disk is writable and it is - there will always be way to go back to old versions it just files.. like reinstalling windows on your pc.
Since the new Rom is public I have read all posts about it here. Maybe I had lucky, or simple due it without messing with the files.
Yesterday I made the upgrade to the new rom, directly from the last Oxigen version, without downgrade to 2.2. I simply create the dload folder on SD card, put there de update file, boot with +- Power, and chose upgrade from SD card.
After step 2 I reboot the phone a install step 3 upgrade. Everything as installed fine, no boot loops, nothing...
Also the root method decribed in this forum as work on first time.
24 hours after the upgrade, and some reboots to test, I never se the boot loops, and the phone is working well.
The new ROM, even in beta stage, to me is a great improvement.
Well either you were lucky or me and the majority were unlucky.
But issues only start to happens when rooting.
So that you can see it fried me the 1 USB cable. This cable is only good to charge the battery now....
Also, ****ed the device USB storage MOUNT.
I connect it to the computer and the computer sees it as a CD drive not allowing any changes.
Also when press the button to mount the USB on the device it never gets mounted and gives the messages that the SD can now be removed.
So I have put this issue many times but up to the moment no one even reply to help.
I originally followed this:
http://www.modaco.com/topic/341011-ultimate-guide-to-the-huawei-u8800/
and rooted the phone
Then I followed this:
http://forum.xda-developers.com/showthread.php?t=1420728
and I read this:
http://forum.xda-developers.com/showthread.php?t=1492957
I thought that the phone had 2.3.5 on, and then after a while (After I flashed the new zip file), I realised that it only had 2.3.3 on and it won't get past the Huawei screen ie: it's stuck
I backed up the current ROM, but I've no idea on what to do now that it's bricked. I've tried fixing permissions, connected via USB and using the "adb logcat" command when I got the reply
/sbin/sh: exec: line 1: logcat: not found
And it's just stuck at the boot screen. Just wondering if any one can help?
Re-flash firmware.
Sent from my U8800 using Tapatalk 2
Qqqxxxzzz said:
Re-flash firmware.
Sent from my U8800 using Tapatalk 2
Click to expand...
Click to collapse
I haven't the foggiest as to why my last post didn't go through. Any way, I did do that and I tried to restore my current ROM as well - remember it hasn't had the 2.3.5 update
On another note, my post also serves as a "hello" post considering that I didn't realise that I had an account here with zero posts until recently. I must have made it a while ago so hello
Hi, I didn't notice it because I use tapatalk.
Sent from my U8800 using Tapatalk 2
That's not a bricked people. A bricked phone is one that does not turn on no matter what, does't react in any shape or form, no screen, no vibration, no sound, no led when plugging usb or charger, no pink mode, no pc access to the phone, no nothing.
Your phone goes to huawei loading screen! How is that a bricked phone? Just reflash The ROM and do triple wipes. Search the forum for that.
flash stock rom. 2.3 or 2.2
not bricked
i can trustly say that it's not bricked, a brick phone means "unusable hardware tools"
the implementation that you explained can not cause a brick operation, you only have to teach your phone to work - that its possible to install the original stock rom.
original stock rom images also contains hubbable hardware working scripts and images.
so you can get your system back and also imei.
fjsferreira said:
That's not a bricked people. A bricked phone is one that does not turn on no matter what, does't react in any shape or form, no screen, no vibration, no sound, no led when plugging usb or charger, no pink mode, no pc access to the phone, no nothing.
Your phone goes to huawei loading screen! How is that a bricked phone? Just reflash The ROM and do triple wipes. Search the forum for that.
Click to expand...
Click to collapse
Thanks for that. I'll go off to search for a stock ROM
EDIT: Which stock ROM do I use?
http://coraldrive.net/users/androidz/583/u8800 stock roms
Once I've got the correct ROM, then I'll probably follow this:
http://forum.xda-developers.com/showthread.php?t=1011527
I'm putting that link in, to help others and in case I can't find it. I'm from the UK if that helps
So today, I loaded the general overseas version stock ROM and formatted the Micro SD card to FAT32 and it loaded with android 2.2 on it (yay)
However, I can't download the official 2.3 ROM because the Huawei site is having problems with it's server, and every file sharing site I've seen has deleted it for "copyright infringement" Why the hell Huawei even requested for it's removal, when it doesn't even work from their own site, I have no idea
So, just wondering if there's any kind people out there that can send us the official 2.3 ROM either by email or a public dropbox link, which can then be deleted?
Thanks
EDIT: I may have found something:
huaweidevice.com/worldwide/downloadCenter.do?method=toDownloadFile&flay=software&softid=NDQzNTg=
Just an update to show what I've now done, in case any one else has the same problem. Go here:
huaweidevice.com/worldwide/downloadCenter.do?method=toDownloadFile&flay=softw are&softid=NDQzNTg=
(XDA forums won't allow me to insert external live links just yet)
Download the file from there. Follow this guide:
http://forum.xda-developers.com/showthread.php?t=1011527
Follow step 12 and onwards from here:
http://forum.xda-developers.com/showthread.php?p=22682229#post22682229
I also deleted the dload folder, in case I accidentally revert it to stock ROM. I also had to run SuperOneBoot again because it was unrooted after I flashed the official ROM
To get clockword mod, go here:
http://forum.xda-developers.com/showthread.php?t=1420728
Once you've got clockword mod, a rooted phone etc... and if you follow the guide posted above, then you can also install custom ROM's on to your Huawei device
Thanks to the XDA people for providing these guides
Hi everyone.
Just repeating again - the model I have is A501 on stock 3.2.1 Honeycomb - a more USEFUL tablet with 3G and WIFI capabilities...One would think it would be a much more popular model, but the A501 doesn't have its own board on XDA; its merged with this board for the less practical A500. Basically, I have created this thread as I don't want to take any 'extra' risks in successfully installing ROOT with the CORRECT ROM with the most updated version of Android available for this tab, for example Jellybean...
Another A501 user, beny9 posted:
http://forum.xda-developers.com/showthread.php?t=1745550
Following TimmyDean's method (thank you) I have now managed to install 3.2 Honeycomb A500 ROM with success after completing steps 1-15 inclusive from his README file. As you will know, I don't have 3G or GPS functionality, so I need a stock A501 ROM to install.
I have found:
http://forum.xda-developers.com/showthread.php?t=1113878
Is my best bet to install Acer_A501_1.309.02_4.031.24_COM_GEN1 : http://cdn.a1.futuredial.com/Acer_A5...2_35b68c5d.zip from that above link, which will keep me on HC 3.2 but now, it will be the ROM for the A501? As it seems the only other NEWER Acer updates for ICS are A500 only...
Can someone link me the a fully detailed video or post on here on installing the ROM i mentioned above (if that's the best one to go with, given what I'm on now; A500 3.2 and still keeping root), or to install some other A501 ROM which is for at least Jellybean or ICS?
http://forum.xda-developers.com/showthread.php?t=1828876
Per this link, shoukd i just use the update.zip (for the 3.2 HC A501 ROM) put it on the SD card then boot up holding POWER + VOL DOWN until the file auto-installs?
http://forum.xda-developers.com/showthread.php?t=1099673
Before I can try the above, I also have trouble after i download the ROM's zip file when I try to unzip. I have downloaded the Acer Update Decrypter, but AVG antiVirus will not allow me to run the EVE file even as an administrator. What should i do?
Thanks
RoOSTA
Your best bet is to install a good 501 HC 3.2 and get on HC for your 501.
The files are available. What you'll probably want is a full HC Update rom for the 501. Note that some of these Acer roms are encrypted, so you'll need to decrypt it first. You can find the decrypting tool in the Themes and Apps forum, as a "Sticky". After decrypting, you can pull the update.zip out of it, and copy to Ext SD (do not extract, just pull the update file out). Boot the tab holding Vol- and PWR I believe. Might be Vol+ but I can't remember. This should force the tab to look for update.zip on your SD and install it.
I would use this one;
Acer_A501_1.309.02_4.031.24_COM_GEN1
After it installs, and you get it set up, you need to get Acer Update Enhancer from the Play Store. This will allow your tab to get the ICS OTA.
Keep in mind, there is only 1 official ICS OTA update for the 501, so don't expect more. It may do it in 2 steps though.
If you want root on ICS, there is really only 1 way to get true root and adb system remounts. And that's to flash the V8 unlocked ICS Bootloader, and flash an insecure boot.image. There's currently a small package that'll give you somewhat root, but it's a pain and really doesn't do a good job. So it's better to get the V8 and unsecure boot image. Might be a good idea to also install CWM Recovery at the same time.
Get the correct rom installed first, then check back if you need help.
Oh yeah, one more thing. When you are on HC 3.2, get your UID number and write it down somewhere. You need this as a safety precaution. There's a good sticky thread on how to do it. Pretty simple really.
MD
Ugh. I have a pain in the A$$ version of AVG...even under advanced settings there was no disable options. Managed to figure it out to run the Acer Decrypter EXE and fix the image you have advised I should download and flash. Will give that a go now...
Thanks again!
Just to fill you in, this issue is solved.
1. Used TimmyDeans rollback V4 tool to a 500 rom
2. SD card was not recognized in CWM or Stock recovery. Was however recognized in the HC OS.
3. Formatted SD Card using Mini Tool formatting app. Format primary partition only to fat32 (defaults)
4. Decrypted and pulled update.zip from this 501 HC full update rom
Acer_A501_1.309.02_4.031.24_COM_GEN1
http://forum.xda-developers.com/showthread.php?t=1816560
5. Did OTA update to 3.2.1
6. No more OTA available, even after installing Acer Update Enhancment tool.
7. Downloaded and used Blackthund3rs Bootloader management app
http://forum.xda-developers.com/showthread.php?t=1622425
8.Downloaded V8 and CWM package, unzipped to the same folder as the tool
9. Ran the 500NVFlashapx app.
10. After completion, booted to CWM recovery, wiped and formatted, and install Moscow Desire's RaptorX almost stock ICS rom.
Works as advertised.
MD
Yep. All thanks to MD's patience and assistance throughout these steps..
Moscow Desire said:
Just to fill you in, this issue is solved.
1. Used TimmyDeans rollback V4 tool to a 500 rom
2. SD card was not recognized in CWM or Stock recovery. Was however recognized in the HC OS.
3. Formatted SD Card using Mini Tool formatting app. Format primary partition only to fat32 (defaults)
4. Decrypted and pulled update.zip from this 501 HC full update rom
Acer_A501_1.309.02_4.031.24_COM_GEN1
http://forum.xda-developers.com/showthread.php?t=1816560
5. Did OTA update to 3.2.1
6. No more OTA available, even after installing Acer Update Enhancment tool.
7. Downloaded and used Blackthund3rs Bootloader management app
http://forum.xda-developers.com/showthread.php?t=1622425
8.Downloaded V8 and CWM package, unzipped to the same folder as the tool
9. Ran the 500NVFlashapx app.
10. After completion, booted to CWM recovery, wiped and formatted, and install Moscow Desire's RaptorX almost stock ICS rom.
Works as advertised.
MD
Click to expand...
Click to collapse
Acer A501 OS refreshment
Moscow Desire said:
Your best bet is to install a good 501 HC 3.2 and get on HC for your 501.
The files are available. What you'll probably want is a full HC Update rom for the 501. Note that some of these Acer roms are encrypted, so you'll need to decrypt it first. You can find the decrypting tool in the Themes and Apps forum, as a "Sticky". After decrypting, you can pull the update.zip out of it, and copy to Ext SD (do not extract, just pull the update file out). Boot the tab holding Vol- and PWR I believe. Might be Vol+ but I can't remember. This should force the tab to look for update.zip on your SD and install it.
I would use this one;
Acer_A501_1.309.02_4.031.24_COM_GEN1
After it installs, and you get it set up, you need to get Acer Update Enhancer from the Play Store. This will allow your tab to get the ICS OTA.
Keep in mind, there is only 1 official ICS OTA update for the 501, so don't expect more. It may do it in 2 steps though.
If you want root on ICS, there is really only 1 way to get true root and adb system remounts. And that's to flash the V8 unlocked ICS Bootloader, and flash an insecure boot.image. There's currently a small package that'll give you somewhat root, but it's a pain and really doesn't do a good job. So it's better to get the V8 and unsecure boot image. Might be a good idea to also install CWM Recovery at the same time.
Get the correct rom installed first, then check back if you need help.
Oh yeah, one more thing. When you are on HC 3.2, get your UID number and write it down somewhere. You need this as a safety precaution. There's a good sticky thread on how to do it. Pretty simple really.
MD
Click to expand...
Click to collapse
I am embarking on a very crucial mission for my Acer A501 . Its tablet OS refreshment. I have spoken and written to Acer but all my pleas have fallen on deaf ears. At last i stumbled on this site and WOW ! I am downloading the Acer_A501_1.309.02_4.031.24_COM_GEN1 and will flash as per the instruction. But I am finding difficult to locate the "sticky" software for the decryption the above. can you please help me locate the same.
I really appreciate your help and thank you in advance
jonnybrave said:
I am embarking on a very crucial mission for my Acer A501 . Its tablet OS refreshment. I have spoken and written to Acer but all my pleas have fallen on deaf ears. At last i stumbled on this site and WOW ! I am downloading the Acer_A501_1.309.02_4.031.24_COM_GEN1 and will flash as per the instruction. But I am finding difficult to locate the "sticky" software for the decryption the above. can you please help me locate the same.
I really appreciate your help and thank you in advance
Click to expand...
Click to collapse
Here is the decryption tool. Located in themes and apps.
http://forum.xda-developers.com/showthread.php?t=1869505
Good Luck!
MD
Trouble installing update.zip for A501
Moscow Desire said:
Here is the decryption tool. Located in themes and apps.
http://forum.xda-developers.com/showthread.php?t=1869505
Good Luck!
MD
Click to expand...
Click to collapse
Hi MD,
I have Acer Iconia A501 tablet. My tablet suddenly showed andriod logo with exclamation mark when it was being used. Upon looking at your posts, I found the resolution which I tried. I am not expert in this all, but I tried running your ROM "41-124-01-A500-update" from one of your posts which was actually meant for A500. This resolved the issue successfully and tablet was up and running.
Then further I found full ROM for A501 as mentioned below and thought that I should try the ROM meant for the model of my tablet.
I successfully decrypted the ROM that you mentioned "Acer_A501_1.309.02_4.031.24_COM_GEN1"
When I tried to update it with the mentioned ROM update.zip, it did updated it from SD card and passed android symbol with those gears running. However, when it restarted the tablet by itself, it showed ACER logo and then it showed "ANDROID" (spelling in blue color) which kept on flikering slowly for long long time....for more than 30 minutes and did not moved further. Can you please let me know whats could be wrong?
I also tried ICS ROM, but that didn't worked (it failed). So after couple of trail and error, I moved back to A500 ROM update.zip which I knew that is installing successfully.
Can you please let me know what shall be done in case I want update.zip for A501? It will be highly appreciated if you can upload update.zip directly that I can use and that gets installed successfully.
Regards,
Muk
mukapril said:
Hi MD,
I have Acer Iconia A501 tablet. My tablet suddenly showed andriod logo with exclamation mark when it was being used. Upon looking at your posts, I found the resolution which I tried. I am not expert in this all, but I tried running your ROM "41-124-01-A500-update" from one of your posts which was actually meant for A500. This resolved the issue successfully and tablet was up and running.
Then further I found full ROM for A501 as mentioned below and thought that I should try the ROM meant for the model of my tablet.
I successfully decrypted the ROM that you mentioned "Acer_A501_1.309.02_4.031.24_COM_GEN1"
When I tried to update it with the mentioned ROM update.zip, it did updated it from SD card and passed android symbol with those gears running. However, when it restarted the tablet by itself, it showed ACER logo and then it showed "ANDROID" (spelling in blue color) which kept on flikering slowly for long long time....for more than 30 minutes and did not moved further. Can you please let me know whats could be wrong?
I also tried ICS ROM, but that didn't worked (it failed). So after couple of trail and error, I moved back to A500 ROM update.zip which I knew that is installing successfully.
Can you please let me know what shall be done in case I want update.zip for A501? It will be highly appreciated if you can upload update.zip directly that I can use and that gets installed successfully.
Regards,
Muk
Click to expand...
Click to collapse
Hey Muk, I can probably guess the ROM you installed doesn't do data wipes and such, so it caused an animation loop.
Try this one. It's an SD ROM, so it "should" wipe your Data, along with installing the ROM.
https://mega.co.nz/#!NZBlBSLQ!mOHICp7gbinkYeHCvrEz7aKXsWQjjquAWq_XC_lSQzk
As you probably discovered, Acer has pretty much removed almost all tablet ROMs. I snagged a few the other day, then checked yesterday, and they removed all from their support site.
I would guess they are getting out of the tablet business.
Also, they shut down their OTA Update servers for a few months now.
Acer A501
mukapril said:
Hi MD,
I have Acer Iconia A501 tablet. My tablet suddenly showed andriod logo with exclamation mark when it was being used. Upon looking at your posts, I found the resolution which I tried. I am not expert in this all, but I tried running your ROM "41-124-01-A500-update" from one of your posts which was actually meant for A500. This resolved the issue successfully and tablet was up and running.
Then further I found full ROM for A501 as mentioned below and thought that I should try the ROM meant for the model of my tablet.
I successfully decrypted the ROM that you mentioned "Acer_A501_1.309.02_4.031.24_COM_GEN1"
When I tried to update it with the mentioned ROM update.zip, it did updated it from SD card and passed android symbol with those gears running. However, when it restarted the tablet by itself, it showed ACER logo and then it showed "ANDROID" (spelling in blue color) which kept on flikering slowly for long long time....for more than 30 minutes and did not moved further. Can you please let me know whats could be wrong?
I also tried ICS ROM, but that didn't worked (it failed). So after couple of trail and error, I moved back to A500 ROM update.zip which I knew that is installing successfully.
Can you please let me know what shall be done in case I want update.zip for A501? It will be highly appreciated if you can upload update.zip directly that I can use and that gets installed successfully.
Regards,
Muk
Click to expand...
Click to collapse
A big thank you to Moscow. I have tried the above link but still no go.. I have seen on Acer website they have updated the OS but all Android 4.0 ICS and nothing with Honeycomb. The tablet was initially with Honeycomb. Please advice. Thank you and Best Regards.
Trouble installing ROM for A501
jonnybrave said:
A big thank you to Moscow. I have tried the above link but still no go.. I have seen on Acer website they have updated the OS but all Android 4.0 ICS and nothing with Honeycomb. The tablet was initially with Honeycomb. Please advice. Thank you and Best Regards.
Click to expand...
Click to collapse
Hi MD,
Thanks for your super fast response. I am downloading the ROM for A501 from the link provided by me. I will update you if it works in my tab.
I forgot to mention you about one message that I received once tablet is restarted. So, once ROM for A501 from SD card has performed its job successfully....that is that android symbol with gears in its tummy is successfully finished and tablet restarts. It shows "Acer" (spelling logo) and then after it gets stuck at "android" (spelling logo). Between these two, it displays two lines messages on top left corner for 2-3 seconds that the "blob is illegal - abort" and then gets stuck at "android" (spelling logo). I think this might be useful for you to identify something.
Another thing about wiping out the data, in starting when we press volume down and power button, it does display message about SD card (still not not sure about whether it might be wiping out the data or not....I believe you might be correct that it might not be wiping out the data).
Another thing, that I found in my backup is that when I purchased this tab (A501), I downloaded HoneyComb 3.2 Kernel Source Code from the Acer support site. Is this something that you can do magic with and provide me with update.zip? Please let me know....if you can do magic with this, then let me know how shall I share it with you.
Regards,
Muk
Trouble installing ROM for A501
Hi MD,
Thanks for your super fast response.
I tried downloading the ROM for A501 from the link provided by you. It downloaded it from the cloud, but at the very end it displayed message "Decryption Error". Still I tried extracting "update.zip" from the zip file, but it displayed message that the archive is corrupt and file is corrupt. Can you please check at your end and provide me with fresh link or directly with update.zip? For your reference I have attached screenshots of errors.
I forgot to mention you about one message that I received once tablet is restarted. So, once ROM for A501 from SD card has performed its job successfully....that is that android symbol with gears in its tummy is successfully finished and tablet restarts. It shows "Acer" (spelling logo) and then after it gets stuck at "android" (spelling logo). Between these two, it displays two lines messages on top left corner for 2-3 seconds that the "blob is illegal - abort" and then gets stuck at "android" (spelling logo). I think this might be useful for you to identify something.
Another thing about wiping out the data, in starting when we press volume down and power button, it does display message about SD card (still not not sure about whether it might be wiping out the data or not....I believe you might be correct that it might not be wiping out the data).
Another thing, that I found in my backup is that when I purchased this tab (A501), I downloaded HoneyComb 3.2 Kernel Source Code from the Acer support site. Is this something that you can do magic with and provide me with update.zip? Please let me know....if you can do magic with this, then let me know how shall I share it with you.
Regards,
Muk
Trouble installing ROM for A501
Hi MD,
Please read my earlier message and then read this one.
Thanks a lot....your answer about my first problem resolved everything.... (your answer was "that the ROM that I am trying to install is not clearing the data"...I verified that the ROM is clearing the cache, but not the user data. I can confidently say that you correctly identified the issue as when the ROM installation was stuck at "android"....I switched off my tablet and tried installing again the old ROM for A500 which I knew that it is working and instead of asking me to configure the tablet (i.e. time zone, date & time setup, etc.) after installation, it simply logged in and started my tablet as usual....that means that when I was trying to install ROM for A501, it was not clearing user data and was then hanging).
Now coming back to the link that you sent me in previous message, I was able to download the zip file successfully in the second attempt. I extracted the update.zip and it did not work. It showed the similar problem of getting stuck at "android". However, with your great answer that you gave me, I cleared the user data and cache manually by pressing vol up + power buttons simultaneously and then when "acer" symbol displays, releasing only power button and turning on and off the lock button. This cleared user data and cache. After that, since update.zip (that you provided) was already in my SD card, it installed the ROM and tablet works perfectly. Thanks a lot....:good:
One question, when it asked me about the zone, it had only few countries like US, UK, etc. I couldn't find Australia...is it because this ROM not for Australia? I understand that this is not an issue, but if you find anything for Australia, do send me.
Another thing, is this HoneyComb 3.2? Will 3G and GPS work in this one?
Do let me know if you can do some magic with HoneyComb 3.2 kernel source code that I have as mentioned earlier.
Regards,
Muk
mukapril said:
Hi MD,
Please read my earlier message and then read this one.
Thanks a lot....your answer about my first problem resolved everything.... (your answer was "that the ROM that I am trying to install is not clearing the data"...I verified that the ROM is clearing the cache, but not the user data. I can confidently say that you correctly identified the issue as when the ROM installation was stuck at "android"....I switched off my tablet and tried installing again the old ROM for A500 which I knew that it is working and instead of asking me to configure the tablet (i.e. time zone, date & time setup, etc.) after installation, it simply logged in and started my tablet as usual....that means that when I was trying to install ROM for A501, it was not clearing user data and was then hanging).
Now coming back to the link that you sent me in previous message, I was able to download the zip file successfully in the second attempt. I extracted the update.zip and it did not work. It showed the similar problem of getting stuck at "android". However, with your great answer that you gave me, I cleared the user data and cache manually by pressing vol up + power buttons simultaneously and then when "acer" symbol displays, releasing only power button and turning on and off the lock button. This cleared user data and cache. After that, since update.zip (that you provided) was already in my SD card, it installed the ROM and tablet works perfectly. Thanks a lot....:good:
One question, when it asked me about the zone, it had only few countries like US, UK, etc. I couldn't find Australia...is it because this ROM not for Australia? I understand that this is not an issue, but if you find anything for Australia, do send me.
Another thing, is this HoneyComb 3.2? Will 3G and GPS work in this one?
Do let me know if you can do some magic with HoneyComb 3.2 kernel source code that I have as mentioned earlier.
Regards,
Muk
Click to expand...
Click to collapse
I'm mobile right now, so can't go into big detail.
In your settings, about tablet, you can always find info on which specific OS you have. If you indeed have an A501 and the settings tells you that your tablet is a 501, then your 3g and GPS should function.
The only 2 differences between an A500 and an A501 is of course 3g. Also, they use different GPS radios. So you can install 500 Roms on a 501 and vice versa. Just the above 2 items won't work. Also, I believe I gave you a 3.2.x ROM. Getting it to ICS 4.0.4 may be a problem.
I revived my own 501 last night by putting the motherboard in the oven, but now it doesn't read my ext SD card, so I may be stuck on 3.2. Eh, no problem.
mukapril said:
Hi MD,
Please read my earlier message and then read this one.
Thanks a lot....your answer about my first problem resolved everything.... (your answer was "that the ROM that I am trying to install is not clearing the data"...I verified that the ROM is clearing the cache, but not the user data. I can confidently say that you correctly identified the issue as when the ROM installation was stuck at "android"....I switched off my tablet and tried installing again the old ROM for A500 which I knew that it is working and instead of asking me to configure the tablet (i.e. time zone, date & time setup, etc.) after installation, it simply logged in and started my tablet as usual....that means that when I was trying to install ROM for A501, it was not clearing user data and was then hanging).
Now coming back to the link that you sent me in previous message, I was able to download the zip file successfully in the second attempt. I extracted the update.zip and it did not work. It showed the similar problem of getting stuck at "android". However, with your great answer that you gave me, I cleared the user data and cache manually by pressing vol up + power buttons simultaneously and then when "acer" symbol displays, releasing only power button and turning on and off the lock button. This cleared user data and cache. After that, since update.zip (that you provided) was already in my SD card, it installed the ROM and tablet works perfectly. Thanks a lot....:good:
One question, when it asked me about the zone, it had only few countries like US, UK, etc. I couldn't find Australia...is it because this ROM not for Australia? I understand that this is not an issue, but if you find anything for Australia, do send me.
Another thing, is this HoneyComb 3.2? Will 3G and GPS work in this one?
Do let me know if you can do some magic with HoneyComb 3.2 kernel source code that I have as mentioned earlier.
Regards,
Muk
Click to expand...
Click to collapse
Hello mukapril .. may you provide me with the Honeycomb ROM which I might try ?
Thanking you and Best Regards
Trouble installing A501 ROM
Moscow Desire said:
I'm mobile right now, so can't go into big detail.
In your settings, about tablet, you can always find info on which specific OS you have. If you indeed have an A501 and the settings tells you that your tablet is a 501, then your 3g and GPS should function.
The only 2 differences between an A500 and an A501 is of course 3g. Also, they use different GPS radios. So you can install 500 Roms on a 501 and vice versa. Just the above 2 items won't work. Also, I believe I gave you a 3.2.x ROM. Getting it to ICS 4.0.4 may be a problem.
I revived my own 501 last night by putting the motherboard in the oven, but now it doesn't read my ext SD card, so I may be stuck on 3.2. Eh, no problem.
Click to expand...
Click to collapse
Hi MD,
Apologies for very long replies. Wanted to convey the message in detail how I did it so that it might help someone else like me.
Thanks for your response. I have tested it, 3G and GPS is working fine. I believe, before my tab encountered this problem, it was having version 4 which should be ICS. At that stage I didn't had any problem with my tab...I believe it was there for long time.
If you have good known ROM for ICS, please forward me I can try on my tab. If it doesn't work, then will re-install the Honeycomb that you sent earlier.
One more question....when I try to update the system from "About Tablet" in Settings, why it displays message the the "network is poor" and advices to move to better coverage? Though, I am just besides my WiFi modem and coverage is almost 100%.
And @jonnybrave: If you are referring to the ROM that I successfully installed which was sent by MD earlier, then it does not need any decryption. So you can use the link sent by MD earlier in this post. And if you are referring to the KernelSourceCode that I mentioned earleir, then it needs some kind of processing in Linux machine and then you can create some image.....this is was I know about it....sorry not an andrion guru. Please let me know what you are referring to.
Regards,
Mukesh
mukapril said:
One more question....when I try to update the system from "About Tablet" in Settings, why it displays message the the "network is poor" and advices to move to better coverage? Though, I am just besides my WiFi modem and coverage is almost 100%.
Click to expand...
Click to collapse
You get the message as do all 500/501 owners (it can change depending on version of Rom).
Acer no longer gives updates to any of their devices (regardless of age). These are otherwise known as OTA Updates. So they have closed their update servers, so now we get some "message" that absolutely means nothing.
I suppose Acer is getting out of the Android business and no longer supports anything. Nice job Acer.
As for updating to ICS (or any other version), I have a few update files. Generally though, the update files must be matched to the current version of your tablet. Sometimes you can run a "full update" and it will work.
The problem, is these tablets are getting old, and the nand memory can go bad. Running an update can cause a variety of problems such as "Stuck in APX" mode, stuck at bootloader, stuck at boot animation. Then we have to go back to the EUUS file, or an old SD ROM file. So you run the risk of doing things all over again, and the risk that it just won't work again. (I spent a couple hours last night, and was almost ready to throw it in the garbage)
For example, I'm pretty much stuck at 3.0.x or 3.2.x. I've already disassembled the tablet and put the mainboard in the oven, just to get it back to life! And after numerous attempts to get ICS on it, I've pretty much given up before it hard bricks again. In fact, I can't get a 3.2.x EUUS to work on it, so it is stuck at the 3.0.x ATT EUUS. Eh, it's my little girls tab, so as long as it gets You Tube and browser, it's pretty much ok.
Trouble installing A501 ROM
Hi MD,
I am in the same boat as you...lol...This tablet is mostly used by my daughter and as long as it is solving my daughter's purpose, we are happy
I was just curious about that message as to why that is happenning, but after your clarification, it is clear to me as to why it is happenning.
My tablet is working as normal and everything is working fine...so we are happy with what we have.
Thanks a lot!
Regards,
Muk
---------- Post added at 03:04 AM ---------- Previous post was at 02:48 AM ----------
jonnybrave said:
Hello mukapril .. may you provide me with the Honeycomb ROM which I might try ?
Thanking you and Best Regards
Click to expand...
Click to collapse
Hi Jonny,
If you are referring to the ROM that I successfully installed which was sent by MD earlier, then it does not need any decryption. So you can use the link sent by MD earlier in this post. And if you are referring to the KernelSourceCode that I mentioned earleir, then it needs some kind of processing in Linux machine and then you can create some image.....this is was I know about it....sorry not an andrion guru. Please let me know what you are referring to.
Regards,
Muk