Database Users

[Q] How to install bootmenu in android 2.1

hi,guys
nowdays,i found android 2.1 is very stable and fast,but can't install bootmenu and overclock,did I compile the bootmenu? thanks every

iam not an expert but i assume that you can do it by installing defy2ndinit.
يسقط يسقط حكم العسكر.

i install it,but not boot to bootmenu,someone says,that needs android 2.2+

no scaf.
try it.
http://forum.xda-developers.com/showthread.php?t=1032212

bootmenu manager
ahmedbeik said:
try it.
http://forum.xda-developers.com/showthread.php?t=1032212
Click to expand...
Click to collapse
Actully I have the same problem on bootmenu manager, it is not available in the playstore and I even searched on apoide.com it fails to install, I have a motorola Razr XT910 with android 2.3.6 in latinamerica. I have rooted my device in order to install JB 4.1
If there is a link in wich we could download the .apk that would be awsome.
thank you very much for your help

problem in flashing a ROM of dell xcd35 (ZTE blade, Gen2)

I tried to upgrade my dell xcd35 (ZTE blade, Gen 2, froyo 2.2) to
jj_95nano's custom ROM. Now it does not go beyond the galaxy SII animation which suppose to be the custom ROM's starting animation. Neither i'm able to reset it to its original ROM which i backed up with CWM/ROM manager as no recovery screen appears.
What I did is,
1. Root it with z4root.
2. Took backup of current (original ROM) on SDcard
3. Download the custom ROM from http://db.tt/ZBUxXAmi as suggested by weeo on thread http://forum.xda-developers.com/showthread.php?t=1602335
4. copied it to root of my SDcard
5. using ROM manager flashed it (after reboot).
6. Then original Dell animation followed by repeated Galaxy SII animation is displaying but not proceeding further.
7. Now I Can't even switch it off using power button.
8. I tried power+home, power+menu , power+home+vol+ , then vol- instead. almost all combinations to reboot in recovery mode. but it doesn't.
9. I can put it off by replacing battery only, however, I can put ON using power button.
Can anybody help me? This is my first experience of rooting any android (I'm afraid, at the cost of my new phone? ). plz help me.

MDPATIL said:
I tried to upgrade my dell xcd35 (ZTE blade, Gen 2, froyo 2.2) to
jj_95nano's custom ROM. Now it does not go beyond the galaxy SII animation which suppose to be the custom ROM's starting animation. Neither i'm able to reset it to its original ROM which i backed up with CWM/ROM manager as no recovery screen appears.
What I did is,
1. Root it with z4root.
2. Took backup of current (original ROM) on SDcard
3. Download the custom ROM from http://db.tt/ZBUxXAmi as suggested by weeo on thread http://forum.xda-developers.com/showthread.php?t=1602335
4. copied it to root of my SDcard
5. using ROM manager flashed it (after reboot).
6. Then original Dell animation followed by repeated Galaxy SII animation is displaying but not proceeding further.
7. Now I Can't even switch it off using power button.
8. I tried power+home, power+menu , power+home+vol+ , then vol- instead. almost all combinations to reboot in recovery mode. but it doesn't.
9. I can put it off by replacing battery only, however, I can put ON using power button.
Can anybody help me? This is my first experience of rooting any android (I'm afraid, at the cost of my new phone? ). plz help me.
Click to expand...
Click to collapse
Have u tried waiting? First boot can take up to 10 minutes. It could also be because u didn't wipe data and cache partitions
Alternatively u will have to install cwm via adb.

Yeah 2 ways to get out of this if it refuses to boot into the rom or recovery mode. Flash adb via recovery ( I wrote some instructions here: http://forum.xda-developers.com/showthread.php?p=24932544 ) or if adb can't be recognised since you cannot boot, use a tpt.
Sent from my Xoom using Tapatalk 2

Did your blade meet the minimum partition specs? It should work anyway though as its GEN2. Use adb.
Sent from my ZTE Blade using XDA app

Thankx QuantumFoam, you were right!
I didn't wait for enough time after boot.
Thanks matt4321 and karthiknr for your valuable comments which helped me deduce to the exact problem.
The problem was solved after reading 'debricking' in ModaCo forum.
I said i tried all the combination for fastboot, but power + volume down, and that was actually worked for cwm recovery. I've restored the original one.
I request, if possible, plz suggest me a good 2.3.x ROM for my dell xcd35(ZTE blade,Gen2).
hurray..i've made it (though restoring) with ur help !

If you want customization go for CyanogenMod 7.1 or a KANG of some sort. For pure stability and decent battery life (with some tweaks) go for Swedish Snow RLS7 which is what I'm running, I love it. CM7 is 2.3.7 and Swedish Snow is 2.3.5
Sent from my ZTE-BLADE using Tapatalk 2

The best is definitely cyanogenmod. Lots of customization ,Theme support, inbuilt equalizer etc.
However if u want an ICS look there's an IceCreamBread rom that combines gingerbread stability with ICS framework

Which one is better....... Cm 7. 2.3.7 or swedish snow rls7 2.3.5 for dell xcd35
matt4321 said:
if you want customization go for cyanogenmod 7.1 or a kang of some sort. For pure stability and decent battery life (with some tweaks) go for swedish snow rls7 which is what i'm running, i love it. Cm7 is 2.3.7 and swedish snow is 2.3.5
sent from my zte-blade using tapatalk 2
Click to expand...
Click to collapse
hey bro i also had dell xcd35 gen2 with stock rom........i want to flash custom rom please suggest me which one is better....... Cm 7. 2.3.7 or swedish snow rls7 2.3.5 ....i am doing it first time please tell me the important things which to use while rooting.....i am new to all this...

unmesh.ghodke said:
hey bro i also had dell xcd35 gen2 with stock rom........i want to flash custom rom please suggest me which one is better....... Cm 7. 2.3.7 or swedish snow rls7 2.3.5 ....i am doing it first time please tell me the important things which to use while rooting.....i am new to all this...
Click to expand...
Click to collapse
I replied to your thread. Please don't spam.
Thanks
QuantumFoam
Sent from my Asus Transformer TF300T using XDA Premium HD app

help
I tried to install android 2.3 from developers but i failed to install.
Now the phone is not starting when i press on and just writing ZTE
then it restarts, over and over not until i remove the battery.
What can i do to fix this problem?
I really miss my Phone!
Please help

arthur0301 said:
I tried to install android 2.3 from developers but i failed to install.
Now the phone is not starting when i press on and just writing ZTE
then it restarts, over and over not until i remove the battery.
What can i do to fix this problem?
I really miss my Phone!
Please help
Click to expand...
Click to collapse
How u tried to install..provide more details
Sent from my Blade using xda app-developers app

[Q] Any WIUI doesn't work on my device :(

Hi
My device: Motorola Defy CyanogenMod 7.2 off st bootmenu 2.0.0, multiboot defy 0.5 (2.2.2, Poland, green camera SOC, JRDNEM_U3_3.4.2_179 deodex, radio EPU93_U_00.59.01)
I try to install WIUI (2.4, 2.5, 2.6) from different sources on Multiboot (cache - 150mb, data - 750mb, system - 350mb) more than 15 times. Doesn't work:
2.4-2.5 - black screen
2.6.15,16,22 - first load, work screen, reboot and than cyclic reboot from the boot animation
CM7, CM9, MIUI 2.4 work fine
Flash yesterday JRDNEM_U3_3.4.2_179 deodex - didn't help
Help me please.
P.S. I do not have enough posts to post in the topic of firmware WIUI

Is there anyone in the house?

up

Does it boot without multiboot?
Sent from my MB526 using XDA

I didn't try because I need stable main firmware with all working functions for all days using. Now it's CM7.2

up

Maybe issue with multiboot.
Wiui GB is very stable. go for it. Its based on CM 7.2

Do you have installed multi boot manager? Look up if something is wrong (written in red), this is an bug i had sometimes. But will try it if its working on an other defy.
- So 2.6.8 is working s virtual for me the other version will test later

kadavil said:
Maybe issue with multiboot.
Wiui GB is very stable. go for it. Its based on CM 7.2
Click to expand...
Click to collapse
At the Russian-speaking forum, no one is loaded on multiboot. I want to try, but don't want to flash on Nand.
Do you have installed multi boot manager? Look up if something is wrong (written in red), this is an bug i had sometimes. But will try it if its working on an other defy.
Click to expand...
Click to collapse
Yes, I have. CM7, CM9, MUIU work fine.
I even flashed MIUI 2.4 and than flash WIUI 2.6 over MUIU 2.4. Didn't help

Check the md5 sum? Sometimes i got trouble because the zip wasn't complete. And file size was 0kb.
Sent from my MB525 using XDA App

Thank you for advice.
But I tried more than 15 different files.
I try to install WIUI (2.4, 2.5, 2.6) from different sources on Multiboot (cache - 150mb, data - 750mb, system - 350mb) more than 15 times. Doesn't work:
2.4-2.5 - black screen
2.6.15,16,22 - first load, work screen, reboot and than cyclic reboot from the boot animation
Click to expand...
Click to collapse

up

[Q] unable to install MIUI

Hello friends,
I have installed custom ROMs many times before... I have tried MIUI, cyanogenmod 9, etc...
But, before few days my phone had stuck at the boot logo, so I flashed it using the SBF- JRDNEM_U3_3.4.3-36-1.7
my phone is Motorola Defy (green lense) MB525...
Now, when I am trying to install MIUI or WIUI , it is showing installation complete,
but, after rebooting the system it is booting in my Normal FROYO only...
How can I install MIUI on my phone again now????

What the.. unbelievable.. Ok then try a newer 2ndinit apk and check the installation zip files. Is the problem limited to miui or does it happen with ANY ROM?
Sent from my MB526 using xda premium

change the sbf version... try to flash other sbf
I also have defy green, I am on fixed GB sbf and its is working perfectly...... you also can try this

Problem Solved
thekguy said:
What the.. unbelievable.. Ok then try a newer 2ndinit apk and check the installation zip files. Is the problem limited to miui or does it happen with ANY ROM?
Sent from my MB526 using xda premium
Click to expand...
Click to collapse
Thank you very much buddy!!
Actually, this time I was using "tenfar recovery" on my friends suggestion... I think there was some problem with that...
Now, after flashing my defy I installed the newer version of "2nd init recovery"...
And MIUI is running well on my defy now...

CM7.2.4-motoroi-pure-speed-xt720.zipFINAL.

View attachment 1698859hi have been working on this cm7.
its name will say should telll.
Thanks go to.
Nadabak.
Miozoe7ae.
Fjfalcon.
All i did port it without the above people this would not be possiable!
CM7.2.4-motoroi-pure-speed.
http://www.4shared.com/zip/5_FNwx_d/CM724-MOTOROI-XT720-kai-si-50R.html
What works.
radio.
Camera.
Video recording.
Fm radio.
Sensors.
Market.
all gapps are included in rom!
At this time you need to be on xt720-mod-sbf to have working sensors.
i will be adding link and downloads to this page.
WARING do try 2ndboot it will mess up everything.View attachment update-MilestoneXT720-cm7-bootfix-20111005-11541967352147.zip

cm7
http://www.mediafire.com/?9ah0q479plahc0f
Keep this in mind if your a motoroi user you dont flash mod sbf it only for milestone xt720.
Motoroi user can flash without bootfix also.
http://code.google.com/p/miui-xt720/downloads/detail?name=RSDLite4.6.msi&can=2&q=
http://android.fjfalcon.com/xt720/D...tion_MotoConnect_01.01.21_32_bit_4.5.0.msi.gz
This the link to xt720-sbf-mod.
1. Download OR open recovery.
2.extract to main sdcard.
3.flash with rsd lite make sure you have install motorola usb drivers.
When you have flash sbf mod this remember it is not meant to boot.
4.go to stock recovery and click on update from sdcard this will take you to OR.open recovery.
Install cm7.2.4-motorio.zip and bootfix-cm7.
Reboot that it.

tnx man.
downloading.

bootloop
im stuck on motorola logo ;(
should i flash the bootfix? im motoroi
i succesfully installed it. stupid me i use the instruction on milestone
the rom is 100% smooth!

Re: CM7.2.4-motoroi-pure-speed-xt720.zip
zhelin07 said:
im stuck on motorola logo ;(
Click to expand...
Click to collapse
Did you install OR -open recovery to your sdcard.
If so go to stock recovery and click on update from sdcard it will take you to OR-OPEN RECOVERY.
This only xtmod sbf mod is only milestone xt720.
Do have your motoroi sbf to flash.
Sent from my Milestone XT720 using xda premium

mchlbenner said:
Did you install OR -open recovery to your sdcard.
If so go to stock recovery and click on update from sdcard it will take you to OR-OPEN RECOVERY.
Sent from my Milestone XT720 using xda premium
Click to expand...
Click to collapse
yes i click update.zip

fix
http://code.google.com/p/miui-xt720/downloads/detail?name=[79.11][50]_Service1FF_00.sbf.part1.rar
Download this motoroi sbf this will fix you.
You dont flash xt720 mod sbf its only for milestone xt720.
please read thread before flashing.

mchlbenner said:
http://code.google.com/p/miui-xt720/downloads/detail?name=[79.11][50]_Service1FF_00.sbf.part1.rar
Download this motoroi sbf this will fix you.
You dont flash xt720 mod sbf its only for milestone xt720.
please read thread before flashing.
Click to expand...
Click to collapse
yes its working now..

3g
the 3g still not working globe network from ph
guys download the google play mod by chelus its the onlyway to make the market [email protected]

how install this rom for xt720? if i have cm9 and how install sbf?

post some screenshots and/or video plz

How install sbf? and i can install that rom if i have cm9?
mchlbenner,please write full instructions how install this rom on xt720?

cofused?
there are two xt720 guys motoroi and milestone so there might be a confusion. for motoroi user dont use sbf mod and bootfix stock 2.2 will do. for milestone flash 2.1 sbf mod and bootfix will needed.

mchlbenner said:
hi have been working on this cm7.
At this time you need to be on xt720-mod-sbf to have working sensors.
Click to expand...
Click to collapse
Have you try to add sensorfix.ko that is on fjfalcons' ROM ?

Re: CM7.2.4-motoroi-pure-speed-xt720.zip
zhelin07 said:
there are two xt720 guys motoroi and milestone so there might be a confusion. for motoroi user dont use sbf mod and bootfix stock 2.2 will do. for milestone flash 2.1 sbf mod and bootfix will needed.
Click to expand...
Click to collapse
Yes their are but this milestone xt720 forms and directions are given for both.
Sent from my SGH-T759 using xda premium

Re: CM7.2.4-motoroi-pure-speed-xt720.zip
Zachary57 said:
Have you try to add sensorfix.ko that is on fjfalcons' ROM ?
Click to expand...
Click to collapse
For some reason this motodoi cm7 is a little diffrent all my other sensor fixes dont work.
Im working on sensor fix regular sbf 2.1.
Your answer no not yet.
Sent from my SGH-T759 using xda premium

Re: CM7.2.4-motoroi-pure-speed-xt720.zip
vadims746 said:
How install sbf? and i can install that rom if i have cm9?
mchlbenner,please write full instructions how install this rom on xt720?
Click to expand...
Click to collapse
Please read all the thread directions are ready given.
Sent from my SGH-T759 using xda premium

me necessary instal 2.1? if i have xt720.
me need instal sbf from rsd lite yes?

Re: CM7.2.4-motoroi-pure-speed-xt720.zip
vadims746 said:
me necessary instal 2.1? if i have xt720.
me need instal sbf from rsd lite yes?
Click to expand...
Click to collapse
Yes and install motorola usb driver all links are given.
Sent from my Milestone XT720 using xda premium

i got a motorla logo=(
1 i extract open recovery to sdcard
2 i flash sbf in rsd lite,successfully
3 and i dont can go in open recovery it just load motorola logo.