Hello
I've read many comments, and when someone has a problem many people say to reinstall the aurora.
I would like to know what do i have to do in order to reinstall it. do i have to downgrade it to gingerbread and then install aurora or do i need to just install aurora and the 4.1updatea?
Just needed to go to cwm and wipe data, wipe cache and wipe davilk. Then flash the respective zip file. That's it!
Related
Is here anybody, who can install clean WajkIUI 1.12.16 ICS and do NANDROID BACKUP, my friend has some issue to flash this rom throught CWM and only way to flash any rom is via RSD lite and restore via nandroid CWM ..
SO, I want from you Install clean WajkIUI, do a NANDROID backup and upload the backup to any free fileserver like Multiupload or mediafie
If is here anybody so helpful to do this I will by so lucky
Thanks
Just use 2ndinit1.4.2,select stable recovery and install wajkiui with "install zip from sdcard". it will do it without problem.
If it gets bootloop just wipe data and cache.
buruss said:
Just use 2ndinit1.4.2,select stable recovery and install wajkiui with "install zip from sdcard". it will do it without problem.
If it gets bootloop just wipe data and cache.
Click to expand...
Click to collapse
IT get bootloop, do I need to just wipe data & cache or instal zip again too
EDIT: IT WORKS .... Yahoooooooooo
Good news!
At some point in the past, I rooted my Evo with Unrevoked. I'd like to undo that (if necessary?), in order to run CM7. My current baseband version is 2.15.00.11.19. I'm on 2.2. What do I need to do in order to either 1) return to stock and update to 2.3 or 2) install CM7?
All you need to do is put cm7 on your SD go into recovery do a full wipe (factory reset/data, data, system, cache, boot, sd-ext, android_secure, dalvik cache, etc but not SD card or battery stats) go to flash zip from SD locate and select cm7 wipe cache and dalvik cache again flash gapps wipe cache and dalvik, reboot and presto! you're now on cm7 no need to unroot/reroot or go back to stock
We are legion, for we are many.
hey,
Yeah just like evil said, place it in your sd card, do your wipes and flash it. if you unroot then you wont be flashing roms at all! Just google how to flash a rom and it will give you pictures and everything, now if you want to update your device dont unroot, just find a stock sense rooted rom right here on XDA. Itl be allready updated and rooted for your flashing pleasure!
Hello,
I have old Defy with Bayer module. Which software is better for me? I heard that GB kernel has a bug - full CPU thortle. But when it happens ? Does CM9 have any other bugs ? And is it possible to record videos on this?
Thank you for answers !
Hi,
which Kernel is better is related to the software you are using. But you can't be wrong to use the CM7 Kerner with Quarx newest builds. If you want to use Cyanogenmod 9 I would also recommend you to stay on Froyo-Builds, it causes less problems with the camera.
Im of course considering proper kernel for proper CM7 version.
If you use CM7, I see no reason to change to a GB-Kernel-Version, cause it makes nothing better. In additional the newest nighties are made by Quarx for the Froyo-Kernel. See on ge. tt/8rDd1nC
Edit: No space between the dot and the t
But I've heard that GB kernel is much faster... This problem with max CPU use is problem of soft and will be never fixed on this kernel ?
kernel doubt
hi sorry to bother you
i flashed cm7.1.0-rc1.5-jordan-signed.zip a couple months ago, working fine.
i've been wanting to try out the new cm9 builds.
mi kernel version is [email protected]# 1 i dont know if this "froyo kernel" o "gingerbread kernel"
1_which rom sould i flash... quarx (29 jan) or epsylon3 ( 31 jan)?
2_do i need to flash another kernel previously?
3_what steps do i need to take to flash it?
4_will i be able to downgrade back to froyo 2.2.1 or at least my current cm7 ?
thanks a million
matias
elendil1310 said:
hi sorry to bother you
i flashed cm7.1.0-rc1.5-jordan-signed.zip a couple months ago, working fine.
i've been wanting to try out the new cm9 builds.
mi kernel version is [email protected]# 1 i dont know if this "froyo kernel" o "gingerbread kernel"
1_which rom sould i flash... quarx (29 jan) or epsylon3 ( 31 jan)?
2_do i need to flash another kernel previously?
3_what steps do i need to take to flash it?
4_will i be able to downgrade back to froyo 2.2.1 or at least my current cm7 ?
thanks a million
matias
Click to expand...
Click to collapse
1) both roms use froyo kernel, so you can try anyone.
2) you don't have to flash any kernel, cm7 uses froyo kernel aswell
3) I've just flashed 31Jan, I was using cm7 previously. What i did:
-reboot, when the motorolla logo displays, wait for the blue led to show and then press volume down.
-then you go to recovery, latest recovery. (I highly recomend to do a backup (nandroid) before wiping data)
-wipe data/factory reset, wipe cache.
-install from zip file, and choose either 29jan or 31jan zipfile. (remeber 31jan has gapps included, if you go for 29jan you should install gapps too)
-wipe cache.
-go to advanced, wipe dalvik cache.
-reboot!
First time to boot will take some minutes.
4) If you want to get back to cm7, just recover your backup (nandroid) or follow the same steps in 3) but installing cm7 zipfile.
Hope it helps you, if any more experienced user finds an error in what i've said, please correct me.
fedexmagno said:
1) both roms use froyo kernel, so you can try anyone.
2) you don't have to flash any kernel, cm7 uses froyo kernel aswell
3) I've just flashed 31Jan, I was using cm7 previously. What i did:
-reboot, when the motorolla logo displays, wait for the blue led to show and then press volume down.
-then you go to recovery, latest recovery. (I highly recomend to do a backup (nandroid) before wiping data)
-wipe data/factory reset, wipe cache.
-install from zip file, and choose either 29jan or 31jan zipfile. (remeber 31jan has gapps included, if you go for 29jan you should install gapps too)
-wipe cache.
-go to advanced, wipe dalvik cache.
-reboot!
First time to boot will take some minutes.
4) If you want to get back to cm7, just recover your backup (nandroid) or follow the same steps in 3) but installing cm7 zipfile.
Hope it helps you, if any more experienced user finds an error in what i've said, please correct me.
Click to expand...
Click to collapse
Correction in 4th point ---
for restoring ur Nandroid Backup
1. Do a factory Reset/Data wipe
2. Install CM7.zip
3. Go to restore and Restore the Nandroid that u want to restore.
4. Wipe Dalvik Cache ( Don't wipe cache partition)
5. Reboot
kanna91 said:
Correction in 4th point ---
for restoring ur Nandroid Backup
1. Do a factory Reset/Data wipe
2. Install CM7.zip
3. Go to restore and Restore the Nandroid that u want to restore.
4. Wipe Dalvik Cache ( Don't wipe cache partition)
5. Reboot
Click to expand...
Click to collapse
Thanks for the correction, but I've just came back to CM7 by restoring my old nandroid, without wipe and worked well.
camera doesn't work.and some small bugs
If you use CM7
If you use CM7, I see no reason to change to a GB-Kernel-Version, cause it makes nothing better. In additional the newest nighties are made by Quarx for the Froyo-Kernel. See on ge. tt/8rDd1nC
I know there's a lot of info on this subject, but im still confused about a few things related to simply updating to a new version of same rom.
some says i have to wipe all, clear cache and dalvik cache every time, others talk about dirty updating which i guess is without wipe, but do i still need to clear cache and dalvik, or just dalvik cache?, and do i have to flash gapps every time i just upgrade same rom?
like going from 2.50 > the latest 2.52, what i did was:
1. downloaded both pa_grouper-2.52-27OCT2012-190304.zip, and gapps-jb-20121011-signed.zip and put them in root of my nexus 7
2. went to goomanager and clicked "flash ROMs", where i selected my grouper-2.52-27OCT2012-190304.zip, clicked "Order and flash selected" and on next screen checkmarked "Wipe cache/dalvik cache partition"
3. clicked flash, and waited..
4. did same procedure (step 2 and 3) with the gapps-jb-20121011-signed.zip and now im not sure if that all i needed to do, or if there's something i don't have to do next time there a minor update.. or can i skip wipe cache?, or skip flashing gapps (unless there's a newer version of gapps)?
thanks for any answers
-Deco
My steps:
Flash new PA rom
Flash Gapps
Wipe cache
Wipe dalvik
Reboot.
Never had a problem
Jordanooo said:
My steps:
Flash new PA rom
Flash Gapps
Wipe cache
Wipe dalvik
Reboot.
Never had a problem
Click to expand...
Click to collapse
but i still wonder if it's needed to wipe cache/dalvik because it seems to remove some login info fx. in gmail, wallpaper and such, and if it's not needed, then i might as well not do that
-Deco
If you dont wipe them, it can cause troubles.
Also, it shouldnt affect anything, doesnt for me
Edit: Gapps must be flashed everytime for PA. Forgot to mention that
Jordanooo said:
If you dont wipe them, it can cause troubles.
Also, it shouldnt affect anything, doesnt for me
Edit: Gapps must be flashed everytime for PA. Forgot to mention that
Click to expand...
Click to collapse
Found this thread by searching.
I have a question. When you upgrade the ROM, and do all the steps listed above, does this also save the installed apps on the device?
zakafx said:
Found this thread by searching.
I have a question. When you upgrade the ROM, and do all the steps listed above, does this also save the installed apps on the device?
Click to expand...
Click to collapse
Yes. Flashing the rom, then gapps, wiping cache and dalvik doesnt wipe any apps or apps data
i am using august build of RR rom & i want to update it to Nov Built .. but dont know how to update rom >
Please help me !
You are a senior member mate. I don't get you. I think you know flashing procedure and stuff very well. If you mean literally what you wrote then here we go
Download the ROM from following link
https://basketbuild.com/filedl/devs...x/ResurrectionRemix-M-v5.7.4-20160921-lux.zip
Transfer it to SD card
Make a backup (titanium)
Reboot to twrp
Go to wipe>advance wipe >wipe system, cache, data, dalvic cache
Back to install
Flash the rom through recovery
Flash gapps if you want
Flash SuperSU if you want and other stuff like any audio mod
Wipe cache
Reboot to system
Enjoy.
Happy Flashing