Temporary Downgrade to Froyo - Defy Q&A, Help & Troubleshooting

Hi, Everyone,
I have this question. If I wanted to temporarily downgrade from CM7.2 to Stock Froyo 2.2, can I simply do it by restoring the nandroid backup that I've made of the original Froyo 2.2? Or must I do it by flashing a full 2.2 sbf using RSD Lite? The reason I want to do this is because my Superuser Binary Version won't update, it stays at null (0). So I want to start from scratch, reroot, install 2ndinit,etc, and then reflash CM7.2 Stable or jump to CM10.
Sent from my MB525 using xda premium

If you have problems in your rom then it is always better to flash the stock rom with rsd lite then install the custom rom from sd card

Related

Back to FroYo?

Hello can anyone help me? Im on stock FroYo and wanted to install other gingerbread based custom roms .. So suppose before flashing cyanogenmod 7 I did a full nandroid backup of my FroYo and flashed gingerbread then would I be able to revert back to FroYo by just restoring the FroYo nandroid or i'll have to flash a full sbf?
And if restoring will do.. can anyone tell me how?
Thank you in advance ... newbie here :]
Sent from my MB525 using xda premium
U dont need to backup Froyo, u can flash it back using RSD Lite from Froyo Official SBF
flash back a sbf will do

[Q] back to cm7

Hi,
How I can downgrade cm7 from cm9? Normally wipe data&cache and then flash cm7? i haven't backup.
thank you
It depends on which version you're running, if you're using the gingerbread kernel with cm9 then you can't downgrade until you get the froyo kernel. anyway let's assume you have froyo running then a simple full wipe and choose the ROM you want and flash. if you have the gingerbread kernel just full wipe choose the ROM and flash it like before, but you have one more step find the zip with the froyo kernel and flash it right after the ROM.
If you can't be bothered with all the just use a full sbf and start clean from rsdlight.
Sent from my MB525 using XDA

Help needed - flashed GB defy

I was running a red lens defy running CM7.1.
I made a nandroid backup then then upgraded to CM9 and flashed the GB kernel.
I found CM9 too slow so booted into CWM and tried to restore my nandroid backup,unaware I also had to restore the kernel etc. from the advanced menu.
I understand I now need a SBF to restore my phone before I can root, install cwm and get to my nandroid backup.
Do I need a gingerbread SBF to do this? I tried a froyo one but it hangs on the moto logo.
All help appreciated!
You no longer have boot menu and cwm?
Do not flash any GB one. You can just go back to your original froyo version by flashing full sbf. For the list of sbfs check the thread from Walter79 in sticky threads of development section.
Sent from my MB526 using XDA App
The gingerbread kernel u used on the defy isn't the same as the one on the defy + stock firmware.The kernel u used on the defy is a fixed sbf which is an original gingerbread sbf but with some modifications that allow you to downgrade to froyo.Normally if you recieve an official update from froyo to gingerbread on your phone you will never be able to downgrade.What fixed sbfs does is preserve ur downgradeability and are made from official sbfs and compiled by xda devs.
So in your case,since you have a defy,i would suggest you to flash with a stock sbf,the froyo one,ie the last official update your motorola came with.you can find that in xda forums.If not reply back with your country and carrier and i will help you

[Q]Defy+ 2.3.5

So i just bought a defy+ and it has 2.3.5. Stupid carrier.
Well, im trying to find which baseband is using but its not listed in the about phone menu. Is there any other way around?
I want to install a custom rom with 720p, but all there are so many different kernels i have no idea which one to use, or if i even need to flash one. My previous phone was a Xperia X8, you just had to unlock BL, flash kernel and flash rom. Here, theres the SBF files , the nandroid stuff. Are you supposed to use both?
If anyone can recommend me a rom thats not MIUI(i need my drawer ok) or ICS, i would appreciated.
Anyway, i need to know the baseband to see if i can try the soft simunlock.
Here is my build number :4.5.2-51_DFL-50 whatever it means.
ps: i already made a backup with cwm of the stock rom and also rooted my phone.
To flash a sbf you have to download RSD Lite and drivers, here u have the steps: http://forum.xda-developers.com/showthread.php?t=966537. Then, install the rom u like from recovery. Here u have all Epsylon and Quarx ICS nightlys (ICS, CM9) http://forum.xda-developers.com/showthread.php?t=1432100. With Defy+ use gb Kernel.
I just have some questions regarding the kernels. If i install the ICS roms and then i want to go back, which kernel i need to flash to be able to restore my phone using the nandroid backup i made.
densets said:
I just have some questions regarding the kernels. If i install the ICS roms and then i want to go back, which kernel i need to flash to be able to restore my phone using the nandroid backup i made.
Click to expand...
Click to collapse
None, because when you are doing full backup a copy of a kernel is included.
Then im going to update CWM, make a new backup just in case and start to play a around a bit.
Thanks for the help ^^
ps: is there anything wrong with 2.3.5? just asking because i hardly see any posts related to this android version
densets said:
Then im going to update CWM, make a new backup just in case and start to play a around a bit.
Thanks for the help ^^
ps: is there anything wrong with 2.3.5? just asking because i hardly see any posts related to this android version
Click to expand...
Click to collapse
2.3.5 is perfectly fine! It's what I use as a base for both CM7.2 and CM9 builds for Gingerbread and it's great! It's rootable and you can even flash down to Froyo if you wish so, there's a special version 6 Froyo sbf in the forums.
If you have any doubts or if anything confuses you, please do ask before trying, that will save you both time and nerves
Full 2.3.5 sbf that I use: http://sbf.droid-developers.org/umt...22_A022_M002_HWp3_WIG148094_Service1FF.sbf.gz
*EDIT* Just read the whole first post You can use Quarx's CM7.2 and CM9 defy+ nightlies on your phone without flashing anything else but the ROM zip and gapps zip (optional, as you know). Both available here - http://quarx2k.ru/
i have one more question regard the defy+,
If i flash the cm7.2 or cm9 builds by Quarx and want to go back, i just need to restore the backup i made with cwm right? or do i really need to get the sbf from my carrier?
is there any difference(flashing a sbf or restoring form nandroid. Not in procedure but in the final result)?
densets said:
i have one more question regard the defy+,
If i flash the cm7.2 or cm9 builds by Quarx and want to go back, i just need to restore the backup i made with cwm right? or do i really need to get the sbf from my carrier?
is there any difference(flashing a sbf or restoring form nandroid. Not in procedure but in the final result)?
Click to expand...
Click to collapse
Yep restoring the backup will suffice but if you want to get back your warranty you need to uninstall CWM and any other root apps and unroot your phone. That won't leave any trace of root.
Following are some main differences in flashing nandroid and SBF:
1.) Nandroid backup restores your phone to exact state as it was during backup. SBF gives you back exactly how your phone was when you purchased it. Thus, you still have root and CWM after nandroid whereas your phone is clean as new after SBF(recomended to claim warranty).
2.) SBF flashes almost everything except data partition! Nandroid flashes even the data partition..
Thanks for the help, ill use nandroid until i get back. Besides cwm is easy to remove.
^^
I have a question, I have a stock defy (Bayer, according logcat)..
The android version that it has is 2.2.1 and build version is 3.4.2-107_JDNL-9..
Once I root it and install CWM, can I just flash any rom, like the one you link above or I need to use RSD lite for something before?
I'm sorry for the noob questions but never had a motorola before, always nexus line which has unlocked bootloader..
Sent from my MB525 using Tapatalk
JakeOcn said:
I have a question, I have a stock defy (Bayer, according logcat)..
The android version that it has is 2.2.1 and build version is 3.4.2-107_JDNL-9..
Once I root it and install CWM, can I just flash any rom, like the one you link above or I need to use RSD lite for something before?
I'm sorry for the noob questions but never had a motorola before, always nexus line which has unlocked bootloader..
Sent from my MB525 using Tapatalk
Click to expand...
Click to collapse
Yep once you have CWM you can go on with flashing ROMs with ease. You need RSD lite and SBBF only if you soft brick your phone(Very hard!) or want to go back to stock to claim warranty.
Thank you for your help
Sent from my MB525 using Tapatalk

[Q] Defy Green - Blur_Version.2.5.1.1.MB525.Retail rooted and now?

Hi guys,
I am quite new on this mobile phone upgrades. I made same read in the forum about the upgrade process rooting & flashing but I still not sure of the next step after rooting.
Can anyone advice me about what is the best SBF to flash the phone? Where can I find it?
Any thing extra I need to take in consideration?
Cheers
You should not flash full .sbf instead the same as your stock rom or lastest official version via rsd lite !!!!!!!!!
Install 2nd init and use CWM recovery to flash a new rom an all the other stuff
Ms2Ginger is fine ICS is fine
Sent from my MB526 using XDA App

Categories

Resources