So i just bought a defy+ and it has 2.3.5. Stupid carrier.
Well, im trying to find which baseband is using but its not listed in the about phone menu. Is there any other way around?
I want to install a custom rom with 720p, but all there are so many different kernels i have no idea which one to use, or if i even need to flash one. My previous phone was a Xperia X8, you just had to unlock BL, flash kernel and flash rom. Here, theres the SBF files , the nandroid stuff. Are you supposed to use both?
If anyone can recommend me a rom thats not MIUI(i need my drawer ok) or ICS, i would appreciated.
Anyway, i need to know the baseband to see if i can try the soft simunlock.
Here is my build number :4.5.2-51_DFL-50 whatever it means.
ps: i already made a backup with cwm of the stock rom and also rooted my phone.
To flash a sbf you have to download RSD Lite and drivers, here u have the steps: http://forum.xda-developers.com/showthread.php?t=966537. Then, install the rom u like from recovery. Here u have all Epsylon and Quarx ICS nightlys (ICS, CM9) http://forum.xda-developers.com/showthread.php?t=1432100. With Defy+ use gb Kernel.
I just have some questions regarding the kernels. If i install the ICS roms and then i want to go back, which kernel i need to flash to be able to restore my phone using the nandroid backup i made.
densets said:
I just have some questions regarding the kernels. If i install the ICS roms and then i want to go back, which kernel i need to flash to be able to restore my phone using the nandroid backup i made.
Click to expand...
Click to collapse
None, because when you are doing full backup a copy of a kernel is included.
Then im going to update CWM, make a new backup just in case and start to play a around a bit.
Thanks for the help ^^
ps: is there anything wrong with 2.3.5? just asking because i hardly see any posts related to this android version
densets said:
Then im going to update CWM, make a new backup just in case and start to play a around a bit.
Thanks for the help ^^
ps: is there anything wrong with 2.3.5? just asking because i hardly see any posts related to this android version
Click to expand...
Click to collapse
2.3.5 is perfectly fine! It's what I use as a base for both CM7.2 and CM9 builds for Gingerbread and it's great! It's rootable and you can even flash down to Froyo if you wish so, there's a special version 6 Froyo sbf in the forums.
If you have any doubts or if anything confuses you, please do ask before trying, that will save you both time and nerves
Full 2.3.5 sbf that I use: http://sbf.droid-developers.org/umt...22_A022_M002_HWp3_WIG148094_Service1FF.sbf.gz
*EDIT* Just read the whole first post You can use Quarx's CM7.2 and CM9 defy+ nightlies on your phone without flashing anything else but the ROM zip and gapps zip (optional, as you know). Both available here - http://quarx2k.ru/
i have one more question regard the defy+,
If i flash the cm7.2 or cm9 builds by Quarx and want to go back, i just need to restore the backup i made with cwm right? or do i really need to get the sbf from my carrier?
is there any difference(flashing a sbf or restoring form nandroid. Not in procedure but in the final result)?
densets said:
i have one more question regard the defy+,
If i flash the cm7.2 or cm9 builds by Quarx and want to go back, i just need to restore the backup i made with cwm right? or do i really need to get the sbf from my carrier?
is there any difference(flashing a sbf or restoring form nandroid. Not in procedure but in the final result)?
Click to expand...
Click to collapse
Yep restoring the backup will suffice but if you want to get back your warranty you need to uninstall CWM and any other root apps and unroot your phone. That won't leave any trace of root.
Following are some main differences in flashing nandroid and SBF:
1.) Nandroid backup restores your phone to exact state as it was during backup. SBF gives you back exactly how your phone was when you purchased it. Thus, you still have root and CWM after nandroid whereas your phone is clean as new after SBF(recomended to claim warranty).
2.) SBF flashes almost everything except data partition! Nandroid flashes even the data partition..
Thanks for the help, ill use nandroid until i get back. Besides cwm is easy to remove.
^^
I have a question, I have a stock defy (Bayer, according logcat)..
The android version that it has is 2.2.1 and build version is 3.4.2-107_JDNL-9..
Once I root it and install CWM, can I just flash any rom, like the one you link above or I need to use RSD lite for something before?
I'm sorry for the noob questions but never had a motorola before, always nexus line which has unlocked bootloader..
Sent from my MB525 using Tapatalk
JakeOcn said:
I have a question, I have a stock defy (Bayer, according logcat)..
The android version that it has is 2.2.1 and build version is 3.4.2-107_JDNL-9..
Once I root it and install CWM, can I just flash any rom, like the one you link above or I need to use RSD lite for something before?
I'm sorry for the noob questions but never had a motorola before, always nexus line which has unlocked bootloader..
Sent from my MB525 using Tapatalk
Click to expand...
Click to collapse
Yep once you have CWM you can go on with flashing ROMs with ease. You need RSD lite and SBBF only if you soft brick your phone(Very hard!) or want to go back to stock to claim warranty.
Thank you for your help
Sent from my MB525 using Tapatalk
Related
Please forgive the noobish question..this is my 1st android product and I am still learning...
I am currently using Task650's rom version 5 along with the current pershoot kernal....If I want to move to Version 6
1. do i only wipe the delvrik cache,then flash version 6?
2. do I need to reflash the kernal after flashing version 6
3. what is the easiest way to backup all my apps if i have to wipe everything and then put them back?
i am using a rooted 10.6 wifi only...just really trying to get the hang of if there is an order to flashing roms and kernals like if i install a new rom or even update if i have to reflash kernal and reset setcpu?..thanks in advance.
Please Anyone... I really wanna do this...
divo3369 said:
Please forgive the noobish question..this is my 1st android product and I am still learning...
I am currently using Task650's rom version 5 along with the current pershoot kernal....If I want to move to Version 6
1. do i only wipe the delvrik cache,then flash version 6?
2. do I need to reflash the kernal after flashing version 6
3. what is the easiest way to backup all my apps if i have to wipe everything and then put them back?
i am using a rooted 10.6 wifi only...just really trying to get the hang of if there is an order to flashing roms and kernals like if i install a new rom or even update if i have to reflash kernal and reset setcpu?..thanks in advance.
Click to expand...
Click to collapse
1. Most scripts wipe dalvik cache when install or upgrading a ROM. Check with rom author if your not sure. With V. 6 from V. 5 its not necessary.
2. Yes, V. 6 will flash stock kernel. Unless noted in original post from ROM creator, custom ROMs "generally" have stock kernel. Other forums this is not true. You will need to setup SetCPU again after flashing.
3. Titanium Backup, it's a very powerful tool for backing up data apps. Rule of thumb, DO NOT backup and restore system apps, you can put your device in a bootloop or other bad things like applications that force close all the time.
Sent from my SAMSUNG-SGH-I897 using xda premium
divo3369 said:
2. do I need to reflash the kernal after flashing version 6
Click to expand...
Click to collapse
Just a FYI: no need to boot the rom first though. Flash ROM, directly flash Kernel and then boot up. Good luck!
jorisvdende said:
Just a FYI: no need to boot the rom first though. Flash ROM, directly flash Kernel and then boot up. Good luck!
Click to expand...
Click to collapse
I've seen it recommended to reboot between the ROM install and kernel install. Though I can't say that there is harm that I am aware of.
for #1, task650 said: "You only need to wipe dalvich and cache to upgrade from V5"
for #2, havent tried to flash the kernel yet but will give a shoot asap
Any advice how to do it is more welcomed
for #3, titanium backup ftw
I was wondering if I could flash this (UK version) Defy+ MB526 Firmware on a MB525 (red lens) without any problem?
Could someone be so kind as to share a little knowledge here?
Thanks in advance.
I flashed this full sbf and now no 3g and no market, trying to downgrade, hope to find and answer.
I dont think there is a downgrade after you flash full-sbf. we can only use cm9 and GB kernel roms after that.
TheMayor said:
I flashed this full sbf and now no 3g and no market, trying to downgrade, hope to find and answer.
Click to expand...
Click to collapse
you can not do that. Defy and Defy+ have locked bootloader that wont allow the downgrade. Still there is hope for your phone, your issues are quite solvable. You should root your phone, install baseband switcher for 3g, then install custom recovery and then flash google apps, all of this you can find it in the dev section.
If you ask there I would gladly help
u can flash ms2ginger, argentstone, CM7, CM9 but to install there u must root your phone, custom recovery...
I was running a red lens defy running CM7.1.
I made a nandroid backup then then upgraded to CM9 and flashed the GB kernel.
I found CM9 too slow so booted into CWM and tried to restore my nandroid backup,unaware I also had to restore the kernel etc. from the advanced menu.
I understand I now need a SBF to restore my phone before I can root, install cwm and get to my nandroid backup.
Do I need a gingerbread SBF to do this? I tried a froyo one but it hangs on the moto logo.
All help appreciated!
You no longer have boot menu and cwm?
Do not flash any GB one. You can just go back to your original froyo version by flashing full sbf. For the list of sbfs check the thread from Walter79 in sticky threads of development section.
Sent from my MB526 using XDA App
The gingerbread kernel u used on the defy isn't the same as the one on the defy + stock firmware.The kernel u used on the defy is a fixed sbf which is an original gingerbread sbf but with some modifications that allow you to downgrade to froyo.Normally if you recieve an official update from froyo to gingerbread on your phone you will never be able to downgrade.What fixed sbfs does is preserve ur downgradeability and are made from official sbfs and compiled by xda devs.
So in your case,since you have a defy,i would suggest you to flash with a stock sbf,the froyo one,ie the last official update your motorola came with.you can find that in xda forums.If not reply back with your country and carrier and i will help you
Apologies if its been answered but couldn't find one. Also it might be silly but still I need to ask.
I've got a Defy+
Version: 4.5.1 -134 DFP-231 which I need to root.
After looking through the forums, I ended up here.
My questions is regarding the files mentioned in the thread we need to flash.
Are those full sbf's? (Do I need to worry about the CG versions?)
And after rooting, In case I need to unroot, will I be able to flash my stock ROM back??
Worry about what? "Upgrading" to BL8? Don't worry, can't get any worse than BL7
yeah.. It can't get worse..
I'll go for it..
Sent from my Defy+ using Tapatalk 2
These "original full sbf.gz files" should work: http://forum.xda-developers.com/showthread.php?p=22491092
defim said:
These "original full sbf.gz files" should work: http://forum.xda-developers.com/showthread.php?p=22491092
Click to expand...
Click to collapse
Yeah.! I've got the stock SBF.
And to add, I've successfully rooted my Defy+ ..
neo.ank said:
And to add, I've successfully rooted my Defy+ ..
Click to expand...
Click to collapse
I will do in some days. *afraid*
neo.ank, could you tell me what did you do step by step to root your defy, please? Here is so many manual that I'm confused. I have the same version DFP 231 like you have.
Thanks
I've already done it.
I have a question regarding defy+ on 231. If i root it using the new root methods for BL7, will I be able to install a dual boot system, i.e. retaining my stock rom AND adding cm9 (either quarx or epsilon)?
If I can't do the dual boot install, will only cm9 install?
Hi folks!
As the title suggests, I want out from JellyBean and back to MIUI Pickachu Edition 2.xz
I think the latest 2nd boot builds have the GB kernel since I see 4 Vsel levels, so should I flash the froyo kernel?
If so, what should be the order of flashing ROM -> Kernel or other way round?
Also, I have a nandroid backup of when I had MIUI. What steps do I have to follow to restore it, i.e, do I have to flash the ROM (and/or kernel since I was on froyo kernel when the backup was taken) to restore nandroid?
I read a lot about the fuss of latest nightlies changing /system and /data to ext4, but in my case they are ext3, so I guess I should be alright?
Reason for going back is LAG! the immense amount of time to open stuff. I tried loving it, but its just too slow to the point I feel like its running Windows 8 on Intel 8086.
Please post all questions in Q&A. Thread moved there.
Hi!
My friend was in same situation and he went ahead and tried to flash MIUI Pickachu edition, but his process got stuck and now his Defy won't boot.
Hes now flashing stock Froyo sbf.
Thats the reason why I need to know instructions to get back to MIUI without going through sbf flashing.
Any help gladly appreciated!
Krusadr said:
Hi!
My friend was in same situation and he went ahead and tried to flash MIUI Pickachu edition, but his process got stuck and now his Defy won't boot.
Hes now flashing stock Froyo sbf.
Thats the reason why I need to know instructions to get back to MIUI without going through sbf flashing.
Any help gladly appreciated!
Click to expand...
Click to collapse
Did you make a nandroid?
Sent from my MB525 using xda app-developers app
how do I install miui and cyanogenmod both on defy MB525
any help in installing miui on defy would be much appreciated.
You need to flash a Froyo SBF. For some reasons going back to 2.3 always ends in a cache error, flashing 2.6 kernel, nandroid, fullwhipe etc. doesnt work
Harry GT-S5830 said:
Did you make a nandroid?
Sent from my MB525 using xda app-developers app
Click to expand...
Click to collapse
Yes, I have a nandroid backup which I made before installing JB.
sunil_defy said:
how do I install miui and cyanogenmod both on defy MB525
Click to expand...
Click to collapse
sunil_defy said:
any help in installing miui on defy would be much appreciated.
Click to expand...
Click to collapse
Seek and you shall find!
Steveletack said:
You need to flash a Froyo SBF. For some reasons going back to 2.3 always ends in a cache error, flashing 2.6 kernel, nandroid, fullwhipe etc. doesnt work
Click to expand...
Click to collapse
Bummer! I wanted to avoid doing all of that!
Thanks for all your help!
sunil_defy said:
any help in installing miui on defy would be much appreciated.
Click to expand...
Click to collapse
R U on Froyo or GB? if Froyo try to flash fixed sbf I will attached if needed.
Just flashing froyo kernel was ok for the 2nd boot builds upto 9 nov builds.
From 9th nov builds the cm10 rom formats our defy to ext4 file system, so in order to downgrade we need to flash the sbf.
Sent from my MB526 using xda premium
What if i am on mig v2.02 rom and wantd to downgrade to any gingerbread rom..do i need to flash froyo kernel or i need to change 2boot to 2init in bootmenu and clean data to ext 3 then flash rom in custom recovery???
Sent from my MB526 using xda premium
vedhasd said:
Just flashing froyo kernel was ok for the 2nd boot builds upto 9 nov builds.
From 9th nov builds the cm10 rom formats our defy to ext4 file system, so in order to downgrade we need to flash the sbf.
Sent from my MB526 using xda premium
Click to expand...
Click to collapse
My friend, thats what I have said, in my OP,
I have checked using mount command from rooted shell and I can confirm that my /data and /system are STILL in ext3 even though some say that the latest nightlies change the fs while formatting.
Try restoring your backup, you may succeed, otherwise you need to start all over again, with the sbf. I find it better to start all over anyway, no matter, what rom we are talking about. Those installed over a freshly flashed sbf proved to be snappier and absolutely bugfree - at least for me.
Simply try to restore your backup. I tried many roms so far, aslo the newest by Quarx and Epsylon and i always worked for me to install a new rom/zip/ withour anything further. Never installed a sbf.
Was quite late in posting a reply but I did end up flashing Stock Defy 2.2.2 SEA sbf.
I did flash successfully MIUI (Pikachu edition) but it was a bit off, so took a backup and flashed sbf.
Have been on stock ever since (been kinda busy).