I keep trying to connect it, it asks for my password and then it doesnt work. Has anyone tried/got this to work? Thanks
android4545 said:
I keep trying to connect it, it asks for my password and then it doesnt work. Has anyone tried/got this to work? Thanks
Click to expand...
Click to collapse
Try disabling the password from the modem .... many times the problem is the different encryption ..... if you connect the problem is that there
Related
Just last night I tried to tether my phone to the computer via kies. And to my disbelief.. it simply says "This device is not supported by Tethering".
I have had this tethering to work many times before, the only change I can think of is that I recently got an OTA update for the gps fix and now everything stopped working??!
Anyone knows how to make this work again?... and please without rooting the phone if possible
Thanks,
Tim
I cant believe that anyone is NOT having the same problems as me!
Any good news?
Because we simply and safely rooted and flashed Mobile AP. Kies and Kies tethering kinda stunk. Sorry.
Becool0130 said:
I cant believe that anyone is NOT having the same problems as me!
Any good news?
Click to expand...
Click to collapse
Unfortunately you're right. I have 1.5.1 on one computer and 1.5.3 on another - the latter won't allow me to tether. There is a thread floating around about how to setup the phone as a modem and tether for free without an app - sorry, I don't remember where, but I found it earlier this week and it worked great.
rembonjaski said:
Unfortunately you're right. I have 1.5.1 on one computer and 1.5.3 on another - the latter won't allow me to tether. There is a thread floating around about how to setup the phone as a modem and tether for free without an app - sorry, I don't remember where, but I found it earlier this week and it worked great.
Click to expand...
Click to collapse
Hey thanks for the little glee of hope!
Ill start looking for that app ASAP, could you also try to find that too?
Thanks again,
Tim
Tethering without root:
Install the Samsung Drivers
Turn on Android USB Debugging mode on the phone or put USB into Kies mode. In Android Debugging mode you can use your phone while it's plugged in (but you can't access the internet from the phone when it's tethered) but you can't use your phone in Kies mode (there is the MTP app screen blocking everything.)
Create a new Dialup connection using the SAMSUNG Android USB modem. Phone number is *99#, username and password can be anything, including blank
Go to modem properties, and enter at+cgdcont=1,"IP","epc.tmobile.com" into the extra initialisation commands
Dial
chui101 said:
Tethering without root:
Install the Samsung Drivers
Turn on Android USB Debugging mode on the phone or put USB into Kies mode. In Android Debugging mode you can use your phone while it's plugged in (but you can't access the internet from the phone when it's tethered) but you can't use your phone in Kies mode (there is the MTP app screen blocking everything.)
Create a new Dialup connection using the SAMSUNG Android USB modem. Phone number is *99#, username and password can be anything, including blank
Go to modem properties, and enter at+cgdcont=1,"IP","epc.tmobile.com" into the extra initialisation commands
Dial
Click to expand...
Click to collapse
You sir are a genius. Running Windows 7 Pro 32bit and this worked great for me after Kies failed to allow tethering.
chui101 said:
Tethering without root:
Install the Samsung Drivers
Turn on Android USB Debugging mode on the phone or put USB into Kies mode. In Android Debugging mode you can use your phone while it's plugged in (but you can't access the internet from the phone when it's tethered) but you can't use your phone in Kies mode (there is the MTP app screen blocking everything.)
Create a new Dialup connection using the SAMSUNG Android USB modem. Phone number is *99#, username and password can be anything, including blank
Go to modem properties, and enter at+cgdcont=1,"IP","epc.tmobile.com" into the extra initialisation commands
Dial
Click to expand...
Click to collapse
Hi Chui,
I try this last method and still getting the error 777. What am I doing wrong? My computer recognized my phone and all the drivers has been install successfully. Do I need another drivers? What Samsung Drivers are you talking about? I just got my phone back from TMO since it crash when I try to updated it. Please help me and thanks!
Hey all,
Of late, whenever I try connecting my GALAXY 3 to the PC using USB, nothing happens. USB-Debugging is off. And it's supposed to ask me everytime I connect. But lately, nothing happens when I connect it. It does charge though however. And I do get the "Device Connected" sound. But that's about it.
Anybody faced a similar problem? Anybody know the solution to it? Will a reflash of the ROM do the trick? I currently use Kyrillos' ROM
cheekrox said:
Hey all,
Of late, whenever I try connecting my GALAXY 3 to the PC using USB, nothing happens. USB-Debugging is off. And it's supposed to ask me everytime I connect. But lately, nothing happens when I connect it. It does charge though however. And I do get the "Device Connected" sound. But that's about it.
Anybody faced a similar problem? Anybody know the solution to it? Will a reflash of the ROM do the trick? I currently use Kyrillos' ROM
Click to expand...
Click to collapse
Which os r u using in your pc. there is no need to reflash first check properly with yours and your friends pc or laptop then do anything.
Mohanshbhr said:
Which os r u using in your pc. there is no need to reflash first check properly with yours and your friends pc or laptop then do anything.
Click to expand...
Click to collapse
I checked with another PC as well, it's not getting detected. I'm on Windows 7 Professional.
i had also faced a similar problem.
SOLUTION THAT WORKED FOR ME-go to settings -> privacy and do factory reset.
also go in recovery and there also select the third option wipe data factory reset...
after this the pc detected me...
hope this works for you..
dont forget to press the thanks button if it worked...
if you are using some 3rd party laucher........switch back to twlauncer (android launcher) and try.......
check whether you have phone drivers installed or not.....
if not install kies once...
danveer said:
i had also faced a similar problem.
SOLUTION THAT WORKED FOR ME-go to settings -> privacy and do factory reset.
also go in recovery and there also select the third option wipe data factory reset...
after this the pc detected me...
hope this works for you..
dont forget to press the thanks button if it worked...
Click to expand...
Click to collapse
How will I get my data back then?
Try this:
Make sure that the USB cable is not connected from phone to PC.
On the mobile, dial *#7284#
An app called 'PhoneUtil' will open up.
Under USB section, make sure that 'PDA' is selected. If its already selected, then select 'modem' and then again select 'PDA'.
Once done, press 'back' to exit the app
Now Plug the USB cable again. It should work now.
Seems a common enough problem, happened to me as well. The only way I fixed it was a factory reset (tried the phone util thing and it didn't work for me). To save your data I recommend you use a backup app such as my backup root. To do this you will need to root your phone which you can do easily with z4root which you can get here: tiny.cc/z4Root. It will only soft root your phone (temporary root only lasts till you turn your phone off) so it is easily reversable and no chance of brick.
nsm1234 said:
Try this:
Make sure that the USB cable is not connected from phone to PC.
On the mobile, dial *#7284#
An app called 'PhoneUtil' will open up.
Under USB section, make sure that 'PDA' is selected. If its already selected, then select 'modem' and then again select 'PDA'.
Once done, press 'back' to exit the app
Now Plug the USB cable again. It should work now.
Click to expand...
Click to collapse
worked. thanks.
cheekrox said:
worked. thanks.
Click to expand...
Click to collapse
My pleasure!!!!
hey guys, I have the Froyo update on this phone and i one day i accendntally put a password on it when i didnt and now i cant get back into my phone!!!! I also cant connect it to the pc/laptop bacause it has USB debbuging thnks to everyone who comments
if im not mistaken i had the same problem after 10 wrong attempts the phone asked me for my gmail id to reset the password.
if this does not work im afraid you will have to boot in recovery manager and restore the rom or you can wipe the rom and reinstall it if possible and no important data was on the phone
shekster12 said:
I also cant connect it to the pc/laptop bacause it has USB debbuging
Click to expand...
Click to collapse
what connecting to pc has to do with usb debugging? I think it should work properly
my gt540's wifi is not workig from the day i installed custom rom on it
Till now i have changed so many roms
but in none of them wifi connected
but wifi tethering works well
it doesnot connect even after password is correct
it just shows connecting connecting connecting and then disconnected....
I checked its MAC address in about option of settings
it shows unknown...
plz help
anujdhawan said:
my gt540's wifi is not workig from the day i installed custom rom on it
Till now i have changed so many roms
but in none of them wifi connected
but wifi tethering works well
it doesnot connect even after password is correct
it just shows connecting connecting connecting and then disconnected....
I checked its MAC address in about option of settings
it shows unknown...
plz help
Click to expand...
Click to collapse
try disabling your wLAN security and try again
Have you tried factory reset ?
I think that the factory reset would solve the problem
Go into recovery and erase data, cache and dalvik-cache.
That will hopefully fix it
If not, try turning bluetooth on then using wifi
i have hard reset my j5 with combination of power-home-volume up, now my phone call me google account auth but don't recognise .
what can i make to bypass protection ?
thank's
ec0z said:
i have hard reset my j5 with combination of power-home-volume up, now my phone call me google account auth but don't recognise .
what can i make to bypass protection ?
thank's
Click to expand...
Click to collapse
here
not work
i start sydecync on my pc and after connect to a same wifi of device when insert usb cable on phone nothing appear ?
cable is not original ?
windows see j5 but i am unable to browse file.
i have tried also another method to power off wifi during goolge auth but i am unable to launch anything.
ec0z said:
i start sydecync on my pc and after connect to a same wifi of device when insert usb cable on phone nothing appear ?
cable is not original ?
windows see j5 but i am unable to browse file.
i have tried also another method to power off wifi during goolge auth but i am unable to launch anything.
Click to expand...
Click to collapse
Use odin mode and odin.