I know we still need to press the power button But is it possible to have a soft button for power down/ reb00t instead of pressing the Physical button for a few seconds?
it could help to prolong the Power Key which is might also be the problem for those non responsive screens :silly:
Terminal Emulator.
type "su", then "reboot" for reboot. Want a shutdown? Reboot, but take the battery out after it reboots.
mengfei said:
I know we still need to press the power button But is it possible to have a soft button for power down/ reb00t instead of pressing the Physical button for a few seconds?
it could help to prolong the Power Key which is might also be the problem for those non responsive screens :silly:
Click to expand...
Click to collapse
On WM6.5.x I have used utask almost since I got the device brand new & used the extra soft button for power off & shutdown thus hardly ever used endkey button & power up from standby was normally windows key for me as that was best key for my handling of device.
Also my device has had light use & physically gentle use too but still the display issue has occurred.
Having spoken to our device supplier (we have over 20 HD2's) his opinion is even without use the ribbon cable to digi bonding breaks down as he seen same issue on never used old stock after a few days or a months use ...
Hardware quality of the HD2 is a long way from what HTC use to be ...
Poor digi, Mainboard BGA soldering/thermal control & speaker issues are way too common ...
there exists a touch-based solution for android also...i forget the exact name but it was widely distributed with gingerbread android builds in the time period when devs had not yet figured out the hd2 key mapping to bring up the power menu more than once with the end call key.
Sent from my HTC Sensation XL with Beats Audio X315e using xda app-developers app
Download Quickboot (reboot) app from play store and put it on your home screen. It brings up a power menu for re-boot, power off, recovery etc.
Also try screen lock and off app. It turns off the screen. To turn the screen back on, use any of the hard buttons.
I use both these to save using the hard buttons.
^ hey it actually works, tnx :good:
Related
Hi All, I have owned a lot of HTC phones and now I have the HD, its the first time I see HTC phone with such small, thin, and hard to press power button !!
especially in the dark, I cant press it and wake up my phone easily !!
I MANAGED TO TWEAK MY HD and now I wake up my device pressing the volume button, but again I have new problem : sometimes when I carry my phone the volume get pressed by mistake and the ringer get muted or low and I miss some calls !!!
Any solution for this problem so I can wake up my phone from the standby without pressing the microscopic power button !!
Take out the stylus and insert it back again. That wakes up the device. Otherwise you might want to search for a G-sensor enabled "wake-up" application. "Shake_it_to_wake" so to speak...
ahmadddd said:
Hi All, I have owned a lot of HTC phones and now I have the HD, its the first time I see HTC phone with such small, thin, and hard to press power button !!
especially in the dark, I cant press it and wake up my phone easily !!
I MANAGED TO TWEAK MY HD and now I wake up my device pressing the volume button, but again I have new problem : sometimes when I carry my phone the volume get pressed by mistake and the ringer get muted or low and I miss some calls !!!
Any solution for this problem so I can wake up my phone from the standby without pressing the microscopic power button !!
Click to expand...
Click to collapse
Hello
Use S2u2
facet_ said:
Hello
Use S2u2
Click to expand...
Click to collapse
How can you use it to wake up the device? I don't see that option in the description, except the default stylus in and out...
...
I guess S2U won´t help you with waking up your device but if you use volume buttons it will protect you from accidental muting your phone.
I found power hard to press, too, but then I looked closely: This power 'button' is indeed non-symmetrical - at least on *my* device: it stands up a bit on one side, the left side, which is closer to the middle of the HD. So I press it *there*, because obviously enough that's the place where the sensor is located. It works easy every time.
ducatisto said:
I found power hard to press, too, but then I looked closely: This power 'button' is indeed non-symmetrical - at least on *my* device: it stands up a bit on one side, the left side, which is closer to the middle of the HD. So I press it *there*, because obviously enough that's the place where the sensor is located. It works easy every time.
Click to expand...
Click to collapse
Thats a brilliant tip. Thank you.
david-v said:
How can you use it to wake up the device? I don't see that option in the description, except the default stylus in and out...
Click to expand...
Click to collapse
Hello , use keylock.exe and set unlocking any key + s2u2,
ahmadddd said:
I MANAGED TO TWEAK MY HD and now I wake up my device pressing the volume button,
Click to expand...
Click to collapse
Can you tell me how?
Ducasito. Good observation. I wondered why sometime it was easy and sometimes hard. So the slight non-symmetrical button is not a manufacturing fault but a very subtle design feature. Now I know which side to hit. Thanks
Seems all HD's are different OR I have a very heavy finger.
All I need to do to get it to wake it lightly touch the power button and it comes on.
JanSchotsmans said:
Seems all HD's are different OR I have a very heavy finger.
All I need to do to get it to wake it lightly touch the power button and it comes on.
Click to expand...
Click to collapse
I suppose it is just a matter of "where" you push the button. Just push it on the left edge (where the small led is placed) and you will not need that much pressure to switch the device on or off. The button sensor is actually under that left edge. the picture shows the powerbutton part (picture taken from the HTC Touch HD service manual). Under the left edge of it is the sensor, so putting the pressure there is the best way of pressing the button
ahmadddd wrote:
"I MANAGED TO TWEAK MY HD and now I wake up my device pressing the volume button"
my question is: how did you manage it? with a special registry key?
....since a few months I`m searching for a solution....please help me
(my fingers are too big for the Power button)
many thanks, Michael
TFH said:
ahmadddd wrote:
"I MANAGED TO TWEAK MY HD and now I wake up my device pressing the volume button"
my question is: how did you manage it? with a special registry key?
....since a few months I`m searching for a solution....please help me
(my fingers are too big for the Power button)
many thanks, Michael
Click to expand...
Click to collapse
You can use AE button plus. I use this to convert my volum buttons to up and down buttons on single click, select/ok on double click, and volume on hold and press.
Thanks for your answer but I´ve a further question:
Do you "wake up" (from standby) the blackstone by using this AE button? I tried to use this software but I couldn`t wake up the Touch HD from standby by using the volume buttons.
I looked for similar topic but couldn't find it,I can't use power button on my hd anymore,it got broken beacuse of pressing it very often during day to turn the screen on and off...I was wondering if there is an application to assign power button function to home key so when pressing it the screen turns off and on?
Hi, having the same problem, POWER BUTTON is defect/broken, it doesn't have a resistance when I push it in. I can still switch the device on and off, but I have to press the power button hard and the power button does not feel spring loaded any more.
Are there more people having this issue and is there anybody haveing it send for warranty repair already?
Mine is a German O2 device.
Thanks
hit007
Power button does not respond at any point.
*EDIT:except after battery out for a long time, then power button WILL turn the phone on, but then continues to not function as per usual.
However, the phone automatically turns on as soon as the battery is placed in, so it's not dead at least.
Also can not get the phone to be recognised on either of two computers (one running Win 7 and the other Vista) always get "device has malfunctioned etc"
Have re-flashed a ROM from SD but same problem. If holding down the Vol Down on start up (putting the battery in) I can get to bootloader, hence the re-flash. But holding down both gets to the hard reset 'warning' screen, but it won't let me press Vol Up to actually do the hard reset.
All in all a frustrating problem which means I have to remove my battery to turn my phone off and have to use the option from Windows Menu to lock the device.
Any help with any of the problems is greatly appreciated.
Also Power Button mechanical function is still normal.
Many thanks.
Sounds like your end key has become faulty as well as your volume up button. Both of witch are common issues, especially the end button, but most peoples volume down button wears out first. This is do to the fact that the end/power key is in constant use from turning on and off the HD2 or from getting MAGLDR to pulled up a bootup for those running NAND Android. Also the volume keys take a lot of wear and tear from constant volume adjustment especially if you listen to alot of music on your HD2. Plus the volume ..down key takes extra wear and tear from being used to enter bootloader.
hello
hello vsem
Yes it does seem that way, however I have had teh battery out over night, when I put it back in this morning it DID NOT automatically initiate the boot sequence. But it did after I pressed the power button, so it must have read it to some extent?
Also when the phone is on I can change the volume up and down as per usual, its all a bit strange.
Any other way to initiate a hard reset other than that menu?
Thanks very much!
It seems you are having a hardware issue, try sending your device to the service centre.
In the display setting we can adjust the screem timeout. Mine is on 10 minutes for example.
Is there any application which can turn on the screen just with a touch on the screen (instead of pressing the power button) ?
Would be very nice together with the application "Unlock with WiFi"
I mean is there any application which enables the functionality to get the screen back (phone is not locked) only by touching the screen (instead of pressing the power switch on the top).
I know, folks, it is not a big deal to press the power switch, it is just a little bit more comfort to touch the screen only
I don't, believe so, but you can use the volume keys:
http://forum.xda-developers.com/showthread.php?t=1107041
scoob8000 said:
I don't, believe so, but you can use the volume keys:
http://forum.xda-developers.com/showthread.php?t=1107041
Click to expand...
Click to collapse
Hi scoob800. Thanks, but the volume keys would be pritty "the same" as to press the power button.
Generally spoken. Is it possible (and in case it is) and is there any application which can detect a touch on the screen, even if the screen is off ?
Well, the only thing I can think of is to set your screen to never autolocking and have a screensaver app that leaves the screen black. If you do that your battery will probably drain a good bit seeing as your screen will always be on.
Sent from my Gingerblurred Atrix
You can achieve this with NoLED, but that is not its intended purpose. I will explain how: When you get a notification that would normally trigger your LED, NoLED displays a customizable icon on a black screen. With SGS, which it was developed for, has samoled screen and black uses little to no bat/cpu. This is NOT the case with the Atrix, your battery WILL suffer. So battery aside.. Set NoLED to display the time (that way its always on even when you dont have a new notification). Now play with the settings, tell it to "wake up" with the home key. TaDa!
the short answer is feasibly NO. having the touchscreen on at all times will DESTROY your battery life. your only option is to enable the volume buttons.
I use the volume buttons with no lock screen ..... waaaayyy better then powerbutton
Sent from my MB860 using XDA App
Would like to avoid stress on the buttons
dLo GSR said:
the short answer is feasibly NO. having the touchscreen on at all times will DESTROY your battery life. your only option is to enable the volume buttons.
Click to expand...
Click to collapse
OK. But to be honest, what is the difference to use the volume buttons instead the power button ? I would like to avoid this mechanical stress of these buttons. As I used my last phone ( a Samsung) for 8 years, I am afraid, my ATRIX will not make it such a long time
But I got an other idea. What about one of the four "softkey" buttons ? For example the home button.
1.ATRIX-in-PT said:
OK. But to be honest, what is the difference to use the volume buttons instead the power button ? I would like to avoid this mechanical stress of these buttons. As I used my last phone ( a Samsung) for 8 years, I am afraid, my ATRIX will not make it such a long time
But I got an other idea. What about one of the four "softkey" buttons ? For example the home button.
Click to expand...
Click to collapse
The problem is they're still softkeys and not actual hardware buttons. Using the volume is just easier to press depending how your holding the phone. That and your spreading out that wear of the power button across 3 different buttons.
scoob8000 said:
The problem is they're still softkeys and not actual hardware buttons. Using the volume is just easier to press depending how your holding the phone. That and your spreading out that wear of the power button across 3 different buttons.
Click to expand...
Click to collapse
Soft keys will waste a lot of battery, it isn't a good way to turn on your screen by either soft keys or touchscreen
New guy here!
I'm from holland and I have a 2009 hd2 which is currently running AOKP Milestone 5 SE
So this is my first guide and i'll start with something simple.
Eliminating those frustrating pocket unlocks and the screen turning on in your pocket which drains your battery.
The easiest option is to start using your volume rocker as a unlock button and removing all the front button mappings for waking your phone.
Your power button is still your lock button though.
1. Find out if your rom has any special rom options (e.g. rom control, some toolbox, cynogen mod options etc)
2. Go through those options and try to find something with volume wake, it's probably under lockscreen options.
3. If you have found the option enable it, if not you have to download WidgetLocker in the market it comes with the option in it.
4. Once you've tested it we can begin with disabling the front keys by downloading ButtonRemapper in the market.
5. Now when you're in the app, you are seeing a list of key numbers with their name and function behind it. key number 116 is the only one you need to keep on its original state, it is for the power button when the phone is unlocked.
6. Start by clicking a key and putting its state in NONE and press ok, now do this for the remaining keys, EXCLUDING 116.
7. Hit the apply button and see your hd2 hot rebooting
8. When the phone comes to its senses again, try it out!
Lock with your power button
Unlock with your volume rocker.
It almost feels like a modern android phone with the lock/unlock button on the top or side.
I hope you like it, because I really do!
3ll0s said:
New guy here!
I'm from holland and I have a 2009 hd2 which is currently running AOKP Milestone 5 SE
So this is my first guide and i'll start with something simple.
Eliminating those frustrating pocket unlocks and the screen turning on in your pocket which drains your battery.
The easiest option is to start using your volume rocker as a unlock button and removing all the front button mappings for waking your phone.
Your power button is still your lock button though.
1. Find out if your rom has any special rom options (e.g. rom control, some toolbox, cynogen mod options etc)
2. Go through those options and try to find something with volume wake, it's probably under lockscreen options.
3. If you have found the option enable it, if not you have to download WidgetLocker in the market it comes with the option in it.
4. Once you've tested it we can begin with disabling the front keys by downloading ButtonRemapper in the market.
5. Now when you're in the app, you are seeing a list of key numbers with their name and function behind it. key number 116 is the only one you need to keep on its original state, it is for the power button when the phone is unlocked.
6. Start by clicking a key and putting its state in NONE and press ok, now do this for the remaining keys, EXCLUDING 116.
7. Hit the apply button and see your hd2 hot rebooting
8. When the phone comes to its senses again, try it out!
Lock with your power button
Unlock with your volume rocker.
It almost feels like a modern android phone with the lock/unlock button on the top or side.
I hope you like it, because I really do!
Click to expand...
Click to collapse
Nice guide! Very similiar to my original mod here but you make it a bit more simplified xD
After removing WAKE and WAKE_DROPPED from the keys, clicking buttons doesn't wake the screen (as expected), but lights the buttons, and they stay lit forever (i.e. until the next unlock/lock).
Do you also experience the same thing? Any solution?
d4v0r said:
After removing WAKE and WAKE_DROPPED from the keys, clicking buttons doesn't wake the screen (as expected), but lights the buttons, and they stay lit forever (i.e. until the next unlock/lock).
Do you also experience the same thing? Any solution?
Click to expand...
Click to collapse
Yes this is normal, caused by a gpio wake lock from the kernel. No solution yet, I personally don't care as it drains a lot less battery than having your screen come on
Sent from my HTC HD2 using Tapatalk
elesbb said:
Yes this is normal, caused by a gpio wake lock from the kernel. No solution yet, I personally don't care as it drains a lot less battery than having your screen come on
Sent from my HTC HD2 using Tapatalk
Click to expand...
Click to collapse
gpio don't need wakelocks in kernel, when interrupt is raised, cpu exits suspend and services the raised gpio interrupt. This is problem with bad coding logic of the key's backlight driver, i will see what can be done in some days (really busy atm).
Rick_1995 said:
gpio don't need wakelocks in kernel, when interrupt is raised, cpu exits suspend and services the raised gpio interrupt. This is problem with bad coding logic of the key's backlight driver, i will see what can be done in some days (really busy atm).
Click to expand...
Click to collapse
This is still kernel related though right? as it deals with the driver? And you really dont have to work on it its not that big of a deal, put it on lowwwww priority you do amazing work here so as it is
the most important thing is to not keep anything else metal and/or hard, in your pocket with the hd2. Items like batteries or keys
3ll0s said:
...
Lock with your power button
Unlock with your volume rocker.
...
Click to expand...
Click to collapse
This idea is awesome, thank you!
I've customized it a little bit to save my power button (and so my touchscreen connector).
I've set all my hardware buttons to power, but without wake property.
Now, I can:
Lock with any hardware button
Unlock with volume rocker.
thanks a lots aha