Related
Hi everyone,
I rooted my Nexus One and have a minor hassle with it. Every 2 weeks or so, I get a message to install update, I say yes, then switch off, from the "service menu" <- sorry if that's the wrong word, and then I am OK for another 2 weeks or so.
If I root my Galaxy Tablet using Z4Root, am I going to get the same problem?
Any advice much appreciated !
Ofiaich
I think I got the answer to this,
My Nexus One has a Modaco ROM installed, and developed issues after.
My Galaxy Tablet will not have different roms installed, so rooting should not be a problem.
It is now rooted, and I am running Titanium Backup with no issues,
Ofiaich
If you have rooted and installed a custom rom, you should never download/install an ota update unless its by the dev.
Paul @ MoDaCo is (hopefully) working on a MCR for the Tab ;D
Sent from my GT-P1000 using XDA App
nook color is rooted. was working fine. one day i was going to use it and i noticed some applications icons were not showing. also when i look in the drawer a number of them are not shown either. when i click on the application it says application not found. what is wrong?
Rooted how? Stock ROM? CM7? If stock it may have received the 1.3 OTA update from B&N.
mm i used manualnooter 4.5.18 so i would be running on 1.2(i think thats right), is cm7 a good one to use? i mainly just wanted it to be rooted to be more tablet like, didn't really need all the customization. i tried the miui one, but its not that good on the nook. not to my liking anyways.
CM7 is great, though if you didn't like miui at all you may not like CM7 either. Sounds like you like the stock interface. In that case, keep it stock. You may have to re-root if you were somehow updated. Go into settings and see what version is on it now.
The 1.3 update is rootable too right. I same steps as 1.2 with the new manual nooter
Sent from my SPH-D700 using xda premium
My WIFI network at home is visible and it showed full connectivity until I connected to it. It took a while but finally connected then showed no signal and disconnected, then showed full again, then tried to connect again, you get the idea. I have tested this with AOKP and Gummy with the same result. ALSO, I prefer to keep the network hidden but on setup, I hit "Save" it says "Setup has Stopped Working." I have seen this problem on AOKP and Gummy, the two ROMs I prefer at this time.
Root and ROM process I use:
- Started with stock Droid X (.621), SBF'd .604 through Linux (actually Windows the first time then had to call Verizon to fix. They were less than helpful until I got mad. I won't do that anymore)
- Zergrushv4 root through Windows
- Installed Droid 2 Bootstrapper
- Booted into ClockworkMod and formatted the various data's
- Installed ROM (AOKP build-39 is latest)
- Installed .604-to-.621-kernel-update (same result without doing this) <-- Currently running 15p radios if that matters.
- Installed Gapps
- Reset and performed initial setup
For sht's and gigs, I also tried installing the WIFI lib fix (I know it is for Blur) but that prevents AOKP from ever booting. It just sits on the rotating unicorn splash screen until I get bored and cut it off after 10 minutes. From there I have to go back to Linux and SBF .604. Ideas?
I was a noob as of last week but have learned a lot because of these forums. This is the first time I have had to post to get a question answered because there is so much good info out there. I appreciate the mostly accurate and educational information that is openly shared in this community.
EDIT: I tried SBF-ing .621 through RDS in Windows and then .604 in Linux. It is acting the same with Liberty (tried the wifi lib fix), and Cyanogen 7 and 9.
Does it connect to the network when on stock based roms or Gingerbread based roms?
Sent from my Galaxy Nexus using Tapatalk 2
infazzdar said:
Does it connect to the network when on stock based roms or Gingerbread based roms?
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
It connects fine with the .621 and the .604 .sbf's
I just tried CM7 and that wouldn't even install (after a fresh .604 load)
I need to find another good Gingerbread to load and try that. Suggestions? Pref not blur
I got Vortex working with the WIFI. I would REALLY like to get away from Blur though. Suggestions?
lowriderdog37 said:
I got Vortex working with the WIFI. I would REALLY like to get away from Blur though. Suggestions?
Click to expand...
Click to collapse
Vortex is about as close as you can get to a blurless stock based ROM.
Have you tried MIUI to test the WiFi?
There is a Gingerbread version and an Ice Cream Sandwich version.
Sent from my Galaxy Nexus using Tapatalk 2
OK, crisis averted. I don't know 'why' but it is.
Before, when I was trying to get everything working the ROM Manager load of Clockwork wasn't working at all, I was stuck using the Droid 2 bootstrap. For whatever reason I tried using the ROM Manager again to load Clockwork and flashed AOKP to find that everything worked out of the box.
infazzdar said:
Vortex is about as close as you can get to a blurless stock based ROM.
Have you tried MIUI to test the WiFi?
There is a Gingerbread version and an Ice Cream Sandwich version.
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
I did try MIUI a while back but didn't care for the UI.
Stupid Noob question. Will it benefit me at all to install the .604 to .621 image update with 2nd init ROMs?
[Q&A] [ROM] Eclipse Note 3 TW - 2.0.1 (6/27/14) - Real AOSP styling! KitKat has arri
Q&A for [ROM] Eclipse Note 3 TW - 2.0.1 (6/27/14) - Real AOSP styling! KitKat has arrived!!
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM] Eclipse Note 3 TW - 2.0.1 (6/27/14) - Real AOSP styling! KitKat has arrived!!. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Dialer cut off
Has anyone experienced this problem, where the dialer is cut off in the status bar?
Does this rom have red underlining of spelling errors? How quick and accurate is gps lock?
jackpaleczny said:
Has anyone experienced this problem, where the dialer is cut off in the status bar?
Click to expand...
Click to collapse
Yes this is well known by the dev. It's just a small problem from aosp code in the rom.
Here's from the new test build. Not all aosp code in yet but it's not like that in nc4 test build1.
badchorizo said:
... I am on kitkat 4.4.2 build NC2 baseband NC4, safe strap 3.72. Do I need to do anything first or can I dive right in with the latest Eclipse ROM I can find?
Click to expand...
Click to collapse
I thought I would give an update to my post in the main thread asking for some guidance. As I was on NC2 kernel/build# (even though nc4 baseband due to previously trying all of them hoping for better reception and selling on nc4), I decided I didn't need to flash anything prior to flashing Eclipse 2.01-kitkat, and I also decided safestrap 3.72 was fine, mainly because I couldn't find anyone saying which beta of 3.75 was the right one to use, and I knew others had flashed earlier versions of eclipse on 3.72 successfully.
So anyway, I factory reset from SS, flashed eclipse, factory reset again, and everything worked perfectly. Due to holidays I got very little time to mess with it but it never had any crashes with light routine use. Then I got the dark gapps from play store and flashed those. That's when it got buggy. I was flashing on top of "normal" gapps which was probably the problem. But basically none of them worked at all. I restored the normal ones from titanium backup just to limp through the day with a functioning phone but now I want to do it right.
So I've paid for the dark gapps and SE gadgets in the store. I'm ready to start from scratch. Should I flash the dark gapps immediately after flashing the eclipse rom and then get gadgets again? This is still for the latest stable build not the test builds some of you are discussing. My phone status attached
I'll write up a little step by step guide once I get it working because I feel it's the only thing missing... the rom itself is a godsend for delivering us from touch wiz!
Sent from my SM-N900V using XDA Free mobile app
I have noticed on build 6 if I have an email notification and I pull it down and try to open it from the lock screen then email app will fc. As soon as I unlock the lock screen the notification comes back. I have no pin or pattern, etc, just the regular..
As always, happy to provide a logcat if you need one. Thanks.
Anyone else experiencing a heavy battery drain? I had fantastic battery life on 2.01 with the NC2 kernal/radio, but now I am getting a massive drain on 'Cell Standby' and 'Device Idle'. Battery drained 25% in only 2.5 hours, with little to no screen on time.
I'm assuming this is related to the Unity NC4 Radio / NC2 Kernel update I flashed via Odin prior to installing Eclipse 2.1?
Seems like the download link page is down
Everything works perfect except the lollipop email. Everytime I enter my credentials, it force closes and the app no longer opens. Is there a fix or is it something I'm doing wrong???
Sent from my SM-N900V using XDA Free mobile app
How would I go about getting kids mode on this rom?
Sent from my SM-N900V using XDA Free mobile app
Where I can find the NC4 unified firmware?
Clock Widget Lockscreen
How to you change the clock widget on the lock screen from the stock Samsung one to the included widget cLock?
---------- Post added at 02:43 AM ---------- Previous post was at 02:36 AM ----------
furialfil said:
Where I can find the NC4 unified firmware?
Click to expand...
Click to collapse
Go here http://forum.xda-developers.com/showthread.php?t=2787627
Are there any advantages to the nj6 modem?
Sent from my SM-N910V using XDA Free mobile app
BrokenHammer said:
Are there any advantages to the nj6 modem?
Sent from my SM-N910V using XDA Free mobile app
Click to expand...
Click to collapse
Nitro said he tried it and it wasn't nothing special.
Hey, first let me say awesome work man! Loving it!
Second, I have a question. I flashed this on the ATT (N900A) variant, and there has only been one issue. Incoming calls do not show contact names, instead they show the phone number. Is there any way to fix this? Thanks a million.
Edit: Actually it isn't just the dialer/phone app. Other apps are having trouble reaching contact data as well. Hmm.
can't use OTG cable
I'm running Eclipse rom v 2.2 on my SM-N900V, Android 4.4.2, NC2 build.
Whenever I plug in an OTG cable with a flash drive, Eclipse reboots. It's a 32gb flash drive, formatted NTFS, and I'm mounting it with Paragon NTFS and Total Commander. I've tried an exFAT drive and it didn't work either.
It's really frustrating, does anyone have any advice?
Slow Data (for a single app?)
Installed this Rom last night. LOVE IT. It's by far the best I've tried on my phone. I'm having one problem, though. I play a game called "Ingress" (not sure if anyone is familiar with it or not) which uses GPS heavily. This is the one app that is having problems on my phone since I put this ROM on here. The GPS portion seems to work just fine, but it appears that the data connection for this app is EXTREMELY slow. (Even on Wifi, I get the same results.)
I'm getting great latency and speeds over my mobile network, so I know that the phone itself is working properly. But, it seems that the sending and receiving for data within this one app is hampered greatly. I know that there isn't probably much I can do, but I was curious if anyone out there used this same combo of Rom & Ingress and if they had any of the same issues?
Lollipop?
There has been recent talk of Verizon rolling out lollipop for the Note 3 in upcoming weeks/months (it's Verizon, who knows), will you continue work with this ROM on lollipop or is this not going passed 4.4.2?
narwhalz_ said:
There has been recent talk of Verizon rolling out lollipop for the Note 3 in upcoming weeks/months (it's Verizon, who knows), will you continue work with this ROM on lollipop or is this not going passed 4.4.2?
Click to expand...
Click to collapse
Wow! Where have you been?
http://www.droid-life.com/2015/04/15/verizons-galaxy-note-3-gets-lollipop-today/
Oh! Wow I'm behind ... Although is eclipse going to be updated for it?
[Q&A] [ROM][Official][5.0.x] CyanogenMod 12.0 Nightlies for the AT&T Galaxy S4 (jflt
Q&A for [ROM][Official][5.0.x] CyanogenMod 12.0 Nightlies for the AT&T Galaxy S4 (jflteatt)
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][Official][5.0.x] CyanogenMod 12.0 Nightlies for the AT&T Galaxy S4 (jflteatt) . If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
i get sgh-i337m canadian with bell and it's working fine for me
You need to change device name in updater-script
after i have dirty flash for testing over original rom rooted and it worked fine
now i have wipe all and reinstall correctly all is working also my apn was correct
Great rom , good battery life, and many more
I'm about to flash this coming from 4.4.4 omnirom and just wanted to know if there are any special steps or instructions. Thank you
Sent from my SAMSUNG-SGH-I337 using XDA Free mobile app
Rockman195 said:
I'm about to flash this coming from 4.4.4 omnirom and just wanted to know if there are any special steps or instructions. Thank you
Sent from my SAMSUNG-SGH-I337 using XDA Free mobile app
Click to expand...
Click to collapse
Same as always...
Prefered steps:
FullWipe, Flash Rom, Flash GAPPS and Reboot... worked for me.
Flashed to this rom and titanium backup says I don't have root access anymore. What did I miss?
Sent from my GT-N8013 using XDA Free mobile app
Rockman195 said:
Flashed to this rom and titanium backup says I don't have root access anymore. What did I miss?
Sent from my GT-N8013 using XDA Free mobile app
Click to expand...
Click to collapse
You have to enable root access first. It's not enabled out of the box.
Navigate to "about phone" in settings and tap the build number a bunch of times util it says that you have enabled "developer options" then back out of "about phone" and goto "developer options", scroll down to "root access" and enable.
.
Ok good deal. Only other issue I'm having is mms doesn't work at all. Is there a fix for that? Thank you.
Sent from my SGH-I337 using XDA Free mobile app
How to make cm12 jflteatt work on jfltecan
Hello, for some reason I am unable to get the rom to install via twrp. I have changed the device name in the updater script but still no luck. Any help? I've seen a lot of people doing the same thing and it worked for them.
Other people have posted this in the main thread but I'm getting signal drops with the 2/18 build using a clean flash on jflteatt. Switching the APN doesn't seem to help at all. Only happens a couple times a day. Other than that it seems to be working great!
magicmanfk said:
Other people have posted this in the main thread but I'm getting signal drops with the 2/18 build using a clean flash on jflteatt. Switching the APN doesn't seem to help at all. Only happens a couple times a day. Other than that it seems to be working great!
Click to expand...
Click to collapse
Not sure if you found a solution yet--but try deleting all the APNs except for ATT phone and ATT lte. Then reboot. Select LTE (recommended) if not defaulted to already. And you should have improved signal after that.
I've never ran cm on my s4. I've run stock based, and GPE based. So this will most likely sound newb, even though I'm not : do I need to run loki-doki or any other type of Loki script after flashing cm, and before rebooting the phone?
Sent from my TARDIS
Is it normal to get artifacts on black and weird color on this ROM?
0p3nsrc said:
I've never ran cm on my s4. I've run stock based, and GPE based. So this will most likely sound newb, even though I'm not : do I need to run loki-doki or any other type of Loki script after flashing cm, and before rebooting the phone?
Sent from my TARDIS
Click to expand...
Click to collapse
No, that is automatic as long as your phone meets the bootloader requirements mentioned in the OP.
Help! NO Access to USB settings after Flash
I just Flashed 5.0.2 CM12 to my S4 i337m and I no longer can get access to my USB settings (*#0808 doesn't do anything) so the AWS enable I did yesterday is now gone and I can't get into the menu to try and do it again, Please can someone point me in the right direction! I was supposed to sign up with a new provider (Eastlink) tomorrow but I can't do it if I can re-enable AWS 1700 band. Thank you!
wrong thread sorry
---------- Post added at 06:41 PM ---------- Previous post was at 06:11 PM ----------
has anyone tried downgrading to MDB or MDL. I'm currently on OC3 and not sure if a downgrade would even work.
Good day, I am a noob, I installed Safetrap in Android 4.4.4, I can install this ROM? Or as I can install? Sorry for my bad English.
Hi, I'm a noob. I want to install this ROM on my Galaxy S4 AT & T but do not know how. Someone tells me I need to install Cyanogenmod? Sorry for my bad English.
Updated the phone to 5.0.1 on a Touchwiz rom without knowing about the problem with xposed and custom recovery. Is there anyway to downgrade this to the MDL or MDB bootloader?
SGH-i337m and Cyanogenmod 12.1
Hi. I recently flashed my Samsung S4 to Cyanogenmod 12.1 using 12.1-20150426-NIGHTLY-jfltexx. Although it is working fine overall, I am having trouble maintaining Bluetooth connectivity. After reboot, the connectivity is ok for about an hour and then drops. And when it drops, it doesn't turn back on again.
Is there any way to fix this problem?
Also, is there a newer update that is compatible with SGH-i337m? I have received the latest updates of nightlies on my phone, but when I go to install them, the installation aborts.
Lose SD Card functionality with 5.1
I flashed the 12.1 05062015 nightly and have been experiencing intermittent access problems with my SD Card (external 64MB). Checking Storage, the SD Card sometimes disappears but the menu still shows an Unmount SD Card option, suggesting that the OS knows the card is in place. And sometimes unmounting followed by mounting brings the SD Card back to life. Other times, however, unmounting does nothing and a restart is required to enable functionality.
I also tried to move some apps from the phone to the sd card in Apps and while these moves appeared successful (i.e., the button for "move to phone" was highlighted and the move to sd card not highlighted), Root Explorer now cannot locate them and the moved apps no longer appear in the Apps listing.
The SD Card worked perfectly with KitKat so I don't believe the sd card is the issue. A Google search shows numerous concerns involving Lollipop and sd cards but none of the solutions have worked.
Wondered if anyone else with an AT&T Galaxy S4 has had this problem and if there is a solution you can point me to.
Thanks.
Bob