Related
So yesterday my Kies said there was a new firmware for my SGS, and after backing up my data with kies, i started updating it. The update got stuck at 71% for 2 hours, so i decided to disconnect the cable and recover the phone afterwards. But i cant get to connection mode or download mode, I've read lots of threads in this forum, tried many combinations, tried to release power when the icon disappears, but nothing... The image with the phone, triangle and computer appears all the time, and i haven't seen anything other than this.
Also, my computer doesn't recognize the phone when connected since i tried to update the firmware.. I have also tried with Odin, but i got the same result.
So, anyone can help me? I won this phone in a christmas contest, and they haven't delivery the warranty yet, so im kinda stuck.
thanks for your time reading this.
You could try this:
http://forum.xda-developers.com/showthread.php?t=819551
Read the sticky topic about JIG/JTAG.
GL.
Hum, i was trying to avoid that method, but i guess i will give it a try later. First i will try to get my warranty.
Ricardo_1991 said:
So yesterday my Kies said there was a new firmware for my SGS, and after backing up my data with kies, i started updating it. The update got stuck at 71% for 2 hours, so i decided to disconnect the cable and recover the phone afterwards. But i cant get to connection mode or download mode, I've read lots of threads in this forum, tried many combinations, tried to release power when the icon disappears, but nothing... The image with the phone, triangle and computer appears all the time, and i haven't seen anything other than this.
Also, my computer doesn't recognize the phone when connected since i tried to update the firmware.. I have also tried with Odin, but i got the same result.
So, anyone can help me? I wont this phone in a christmas contest, and they haven't delivery the warranty yet, so im kinda stuck.
thanks for your time reading this.
Click to expand...
Click to collapse
The same thing happened to me a month or so ago, I managed to get it in to download mode by removing the battery, putting it back in and being very quick with my fingers to get it in to download then flashed with odin.
You backed up your data did you back up your original rom by any chance ??
jje
Remove your battery for 10 min. then try again if u hadn't solved 3 button combination before
JJEgan said:
You backed up your data did you back up your original rom by any chance ??
jje
Click to expand...
Click to collapse
I don't think so.. :/
As Samsung broke the phone i would take it to a Samsung service centre before getting involved in warranty breaking flashing .
jje
JJEgan said:
As Samsung broke the phone i would take it to a Samsung service centre before getting involved in warranty breaking flashing .
jje
Click to expand...
Click to collapse
very good point.
If you want to fix it yourself the mentioned battery pull will probably work.
(pull the battery out, wait a few seconds, put it back in, voldown-home-power and you should be in download)
I had a similar problem some time ago (Phone ! PC screen)... I disconnected the battery for half a day came home from uni and put the battery into the phone, while holding ALL (hard) buttons at the same time... then, download mode actually went through
theduckking said:
very good point.
If you want to fix it yourself the mentioned battery pull will probably work.
(pull the battery out, wait a few seconds, put it back in, voldown-home-power and you should be in download)
Click to expand...
Click to collapse
That doesn't work.. the same screen appears all the time
Happened to me once too, just keep holding onto the buttons, it will eventually go to download mode.
Sent from my GT-I9000 using XDA App
Ok guys, thanks for the support. I will keep trying, and if it fails, i will get my warranty and go to samsung.
Get ur phone into a black screen no icon so basically completely off then hold the download mode 3 button combo u phone should then turn on in download mode
To sumerise
Use the download combo to turn on ur phone basically its how I got my butt saved when I first got this icon thing
I only had the phone a week so I was very happy to save it
Sent from my GT-I9000 using Tapatalk
rudeboy150 said:
Get ur phone into a black screen no icon so basically completely off then hold the download mode 3 button combo u phone should then turn on in download mode
To sumerise
Use the download combo to turn on ur phone basically its how I got my butt saved when I first got this icon thing
I only had the phone a week so I was very happy to save it
Sent from my GT-I9000 using Tapatalk
Click to expand...
Click to collapse
I did that so many times already, but the result is always the same for me...
azleep said:
Happened to me once too, just keep holding onto the buttons, it will eventually go to download mode.
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
I pressed the buttons for 5 minutes, but nothing, the "phone ! computer" icon disappears for 1 second, and appears again, over and over again
@Ricardo_1991
If you remove the battery for some time(10 min.) and you still can't access download-mode then Sbl on your device has been corrupted while kies did flash the ROM, take it to a samsung service center and get it fixed.
You probably have done this but ensure your usb cable is REMOVED until you get the download mode working.
Personally I'd use the jig. As soon as you have that jig built you can have your phopne working again (and updated) in less than 30mins. Who knows how long it will take the service centre to fix it.
DrFredPhD said:
Personally I'd use the jig. As soon as you have that jig built you can have your phopne working again (and updated) in less than 30mins. Who knows how long it will take the service centre to fix it.
Click to expand...
Click to collapse
I agree, but im from Portugal, and i dont have any nearby store where i can buy all the materials. What i can do is order the micro sim thing from amazon.co.uk, and the 301K resistor from somewhere else..
ps: the sellers of resistors in amazon wont send them to portugal, only the micro sim plug
Okay i screw it up now and my xperia x8 is broke because it wont boot up and when i try to fix it with SE update service i keeps telling its failing and i think its because i have to little battery power left and when i try to charge my phone nothings happening so i need help fast to fix this problem
Plzz help me guys you on xda is my only hope!
Try to flash a ROM using FlashTool
Read guide before posting, lol. Flash shakira with flashtool, same as baseband for example.
Swyped from X8
Noooo!just turn off your,phone,and hold back button,then plug in your pc cable,and when the green light is on,it means your phone is charging.leave it around an hour,then flash it with update service.
Sent from my Arc-X8 using Tapatalk
If your phone does not charge with the standard charger, you should search for a chinese charger for the battery. I'm pretty sure you can find them allover, they are used to charge only the battery like this one shown in this video.
SimonL98 said:
Okay i screw it up now and my xperia x8 is broke because it wont boot up and when i try to fix it with SE update service i keeps telling its failing and i think its because i have to little battery power left and when i try to charge my phone nothings happening so i need help fast to fix this problem
Plzz help me guys you on xda is my only hope!
Click to expand...
Click to collapse
OKay..Could you tell us what excactly screw??Software??So what???Close Your phone and then use PC Companion: Connect your phone to your PC and turn it on. Look around the update phone section of PC Companion for an option called "Repair your phone". Just follow the steps and your phone will be in working order pretty soon..
Then charge it...If not,you have problem with your battery and not phone...
OK thanks for all the replys
But now its fixed!
i dont know what i did but i tried like ten times and suddenly it worked to reset the phone with SEUS
I so hope someone can help.
Downloaded an app which i then couldnt close no matter what so i pulled out the battery put it back in and now all i have is a black screen and cant use my phone at all.
Tried hooking up to Kies but it wont let me do anything as saying app is still open.
Really hoping i dont loose everything can anybody help???!!!!
what app was it ?
ph1n1c said:
I so hope someone can help.
Downloaded an app which i then couldnt close no matter what so i pulled out the battery put it back in and now all i have is a black screen and cant use my phone at all.
Tried hooking up to Kies but it wont let me do anything as saying app is still open.
Really hoping i dont loose everything can anybody help???!!!!
Click to expand...
Click to collapse
What was the app, and where did you download it from?
And if you hooked your phone up to kies and it saw it....then the phone must be powered up. Remove the battery again, wait 10 minutes, then replace it.
Sent from my GT-I9000 using XDA Premium App
From the silence I assume he realised he hadn't actually turned his phone off at all and sorted it out...or the app killed HIM as well.
Sent from my GT-I9000 using XDA Premium App
Nope im not dead and im a she not a he.
Yes the phone has power but only shows a black screen.
Yes the battery has actually been out all night.
No Kies did not tell me anything i got a box up on my phone when it conected saying could not connect as application open.
The application was called Kids mode by zoodles.
They have sent me 2 ways to reset my phone one of which to hold down the volume button then press the power button which shows a menu choose clear storage using the volume button and the phone should be restored....it doesnt do any of that just turns on.
The other way is this
a) Install the Android SDK from a website they mentioned
b) Connect the phone to the computer with a USB cable
c) Type "adb uninstall com.zoodles.kidmode"
of which i am currently attempting to understand.
If you know any different then your help would be appreciated.
oh and the app itself i found on the android market on my phone
try getting into recovery by pressing vol up+home button+power and release when the S logo pops up
Thank you for that. It didnt work.
Have been defeated all this messing about so have taken in to have system rebooted.
I had the same almost and am still locked in the "Logo of Limbo" ( the big S) after 10 days and dealers trying this and that. Can't say it was an app that caused it, but it seems resetting SGS is a task and a half sometimes
ph1n1c said:
Thank you for that. It didnt work.
Have been defeated all this messing about so have taken in to have system rebooted.
Click to expand...
Click to collapse
Well, it's not pressing but holding:
Shut down the phone
Hold Vol-Up+Home and power
Release power when you see "Galaxy S, GT-i9000, Samsung" blinks
if this doesnt work, try Vol+Down instead of Up, and update the status here with what you see.
Please read all of the first post above and then all the instructions FIRST, before trying anything. If you are unsure about anything PLEASE ASK QUESTIONS. No one wants you to damage your phone. So make sure you understand what your doing. If your not sure what your doing you could do more damage to the phone And remember with an unlocked bootloader you can do severe damage.ATTENTION: If your phone is not working but you see a led or have bootloops DO NOT USE HARD-RESET. This can make your phone lock/freeze up until the battery dies. It took 51 hours for mine to die.
However if you get stuck on a boot screen or get bootloops a SOFT-RESET may work to reboot.
If you have unlocked your bootloader this guide may or may not work for you. If you have trouble recovering then see the "TRICKS that require FASTBOOT-mode" below.
YOU NEED TO RESET YOUR PHONE!
If your phone is soft-brick and does nothing when, -the buttons are pressed, -a charger is plugged in, -or if the screen is still ON then....
The memory chips need lose power to clear the bad data and reset the phone. Either by the battery going dead or by unplugging the battery.
You can to leave the phone on a charger to see when the battery dies. Usually the battery will not charge in a soft-brick state and will die while still plugged in. After the reset you should then get the red led. However if you get a red led immediately when first plugged in and no response but red led for a long time, then you may need to leave the phone unplugged and let the battery die.
Only after the chips reset will you get the red led. The RED LED should mean the phone is charging in 'low battery level charge mode'.
Once you get the red led, after the reset, do NOT try to turn on the phone. If you try to start the phone now without fixing the problem you will have to start all over.
UNPLUGGING THE BATTERY
If you feel like taking your phone apart you can unplug the battery. Most 2012 XPERIA's have a built in battery that is not designed to be easily removed. However next to the battery there should be a ribbon cable with a plug to the mother board. Unplugging this cable for 2-3 minutes should reset your phone without letting the battery die. Read here for the original idea post
CAUTION: this may effect your warranty
CLICK This for a Picture
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The Rubber Band Trick
Here are some links to help describe the rubber band trick.
http://forum.xda-developers.com/showpost.php?p=37562298&postcount=301
http://forum.xda-developers.com/showpost.php?p=37844592&postcount=317
http://forum.xda-developers.com/showpost.php?p=39835850&postcount=527
Now after the phone has reset and you have the red led.~ keep charging with wall charger. A charger has a higher current rate and should charge faster than a PC.
~ Make flashtool ready to flash your stock.ftf file. If you are experiencing errors while flashing the entire ROM try to flash just the kernel, check off all in the exclude box except kernel. At this point your battery is very low and doing this will make the flash process much faster than trying to flash the entire ROM.
~ Try to connect phone in flash-mode. If your phone has enough battery you will get green led. If the flash fails on the first try, just put it back on the charger and wait about 10-30 minutes and repeat. It may take a while to charge enough to flash.
~ If you see the red led go out, then try for flash-mode.
~ If you get bootloops, try to flash between loops. As soon as you notice loop, hold volume down and plug the phone into PC with FlashTool ready. Once the loop starts you have very little time to flash, before the loops drain the battery. If you can not flash, the battery will have to die and phone reset. Then start over with red led.
~ After you complete the flash, unplug the phone and see what happens. Sometimes it will boot to Sony screen and then shut off by itself, if so plug in to a charger. You should get the red led then the battery charging screen then. After about 20 minutes of red led.
~ If you get a green led (for flash mode) then press the power button until 1 vibration. The green led should flash 1 time. This will end flashmode and start the phone. If you don't end flashmode the phone will still give a green led whenever plugged in, but it will not charge, until the battery dies and the phone resets again.
~ If you were able to flash the entire stock.ftf file and your phone has gone from red led to the charging screen, then your phone should now be recovered and turn on normally.
~ If you could only flash the kernel then you will get bootloops. Again you can unplug and try a hard-reset to turn off the phone. If hard-reset works plug in charger and wait for red led and then charging screen.
~ If you don't do a hard-reset, the phone boot looping should kill the battery and then plug in charger (this is what I did). Then wait for red led and then charging screen.
~ Now you should have a good kernel and the phone plugged in. You should have the charging screen with the battery icon and led for 'off-line charge mode'. Charge until over 50%. A quick press of the power button will bring up the charging screen.
~ Once over 50% then flash the full stock.ftf with a full wipe.
~ If you got this far but still cannot flash a full stock.ftf file then try to use PC Companion software to REPAIR your phone. Make sure battery is more than 50%.
~ If all fails then post a copy of the FlashTool log in this thread.
To save space please use the BB code for HIDE. Example
[HIDE]The text from your log here[/HIDE]
The text from your log here
If the above steps do not work you can also try the tricks below.
Due to the amount and length of TRICKS, I have provided links to their post
TRICK: FOR PHONE THAT WONT RESPOND; {VIEW THIS POST FOR TRICK}; Confirmed working on ION
TRICK: FOR PHONE THAT WONT RESPOND; {VIEW THIS POST FOR TRICK}; Confirmed ION
TRICK: TRY CONNECTING TO PC; {VIEW THIS POST FOR TRICK}
TRICK: IF BOOTLOOPS WHEN PULGGED INTO PC; {VIEW THIS POST FOR TRICK} This should also work for FLASH mode; Confirmed ION
TRICK: FOR PHONE THAT WONT RESPOND; {VIEW THIS POST FOR TRICK}; Confirmed working on Xperia J
These TRICKS require FASTBOOT access on the phone
TRICK: FOR KERNEL WITHOUT OFFLINE CHARGING; {VIEW THIS POST FOR TRICK }
TRICK: IF YOU GET INTO FASTBOOT MODE, BLUE LED; {VIEW THIS POST FOR TRICK}; Confirmed ION
TRICK: FOR UNLOCKED BOOTLOADERS; {VIEW THIS POST FOR TRICK}; Confirmed ION
TRICK: IF YOU TRIED A HARD RESET (3 vibrations); {VIEW THIS POST FOR TRICK}
TRICK: TO USE FASTBOOT TO ACCESS FLASHMODE; { VIEW THIS POST FOR TRICK}; Comfirmed S
TRICK: USE FASTBOOT TO FLASH KERNEL; {VIEW THIS POST FOR TRICK}; Confirmed ION
TRICK: FOR UNLOCKED BOOTLOADERS; {VIEW THIS POST FOR TRICK}; Confirmed SOLA
Please give feedback if any of these work and on what devices, I will update. 272
If you think I should add something new, either post it or PM me the content to add. Thanks to all those who help.
Please vote in my POLL. If this thread helped you please guide others here for the same help
LINK FOR FLASHTOOL HELP POST
List of those that have recovered
RaWrGs said:
thank you! Worked perfect!! as hard as it was to let the battery die I did it and she worked!!!
Click to expand...
Click to collapse
305nole said:
My phone is working again, you just have to be patient, as it took >16 hrs for my phone to turn on. Once my phone turn on automatically, I had let sit for 4hrs, then pressed the power and volume up buttons at the same time and held it for exactly 5 seconds, it then turned off and I was able to flash as normal. Just be patient. Thanks everybody.
Click to expand...
Click to collapse
accts said:
Here are the steps I took successfully revise my phone from soft brick.
[*]That is all ... Back and running.
[/LIST]
GOOD Luck.
Timing = could be different from phone to phone - depends on battery of the phone before it dead.
Sent from my HTC PH39100 using Tapatalk 2
Click to expand...
Click to collapse
accts said:
Unbelievable - SOFT brick again :crying: ... trying to deodex the new fw 6.1.E.2.68. Now my device is unresponsive neither to soft or hard reset. Waiting for the phone battery to die and see if I can do anything after that
Edit: whewww...So glad just had to wait for battery die - recharge ! was able to reflash - back in business again :victory:
Click to expand...
Click to collapse
faiisfaizal said:
i charge it then got bootloop...but i did not manage to go to flashmode but fastboot....so i just flash cm9 kernel and it boot..then it go back off....i charge it again and its turning on so i just manage to go flashmode so i flash stock ...and now its revive...im glad i made it
dont just w8 it to green....when it bootloop just do the button to go to flashmode...dont do hard reset..it make ur phone longer charging to make the red led coming
Click to expand...
Click to collapse
soudara said:
ok flashtool flash complete very hard to get greenled but its ok but no boot , i replug in wall charger for 10mn and auto boot and all is ok
my ion working perfect
thank you all
i use generic honkong tft firmware LT28i_6.1.E.1.19_Hong Kong.zip
Click to expand...
Click to collapse
ching11 said:
yeah, finally, Successful to flash the rom in my ION and running normal now~~~:victory::laugh:
Click to expand...
Click to collapse
ghekua said:
I just get my phone back to life )
My phone back to life now.
Click to expand...
Click to collapse
markelON said:
I Flashed Custom kernel and got Briked (Boot Loops) at 9th Dec Morning 10:30AM
Did Hard Reset and phewwww Phone is Completely Dead Unresponsive.
BUT DON'T GIVE UP....
Many Thanks To People Who Have Shared Their Experiences Here.. Keep It Up Guyz.:good:
Click to expand...
Click to collapse
aimakun said:
In last Thursday I decide to get back my bricked ION and then follow the instruction as markelON suggested.
And when I tried 2 hours later, I've finally get the Xperia logo again, and everything become working!
In my case I found later that the speaker in back of the phone has broken. I don't sure this was already broken since the phone bricked or between the repair service tries for recover my phone. But other functions are working and my dad had car accident recently. So I keep my phone and still not send back to repair service yet.
Now it has hardware issue, not brick, so I could call the repair service to fix it now. :silly:
I thank everyone who lend the help, especially markeION.
Thank you very much.
P.S. I has also written the fix instruction summary in my language and publish to local community too, based on markeION suggustion. So I think this would help others who aren't skill the English language too.
Click to expand...
Click to collapse
Zirdark said:
Thanks!
I was able to get it in fastboot mode, i will now try to fla****
this is what i did for the people having the same issue.
once you get the boot loop press power+vol up until you get first vibration, after that very quickly you need to plug usb to the pc while holding only the vol up key.
this worked in a xperia ion bootloader unlocked
Thanks everyone for your help. i got more experience now, i hope this helps to everyone else that have or get the same issue.
Remember when you get bootloop press power+vol up until you get first vibration, then very quickly connect the phone pressing vol up or vol down to get fastboot or flashmode, then you can fix the phone with flashtool. this worked for my Xperia Ion bootloader unlocked
Click to expand...
Click to collapse
warfist said:
Look, right now i am in Fastboot Mode! This time it worked again. But when i try to flash a kernel.sin it says that there is no device! What to do man??
EDIT: WAIT, NOW I AM IN FLASH MODE AND TRYING TO FLASH KERNEL! But after a few seconds i get this:
EDIT 3: I made it! I had to flash the whole Rom. Not just the system.sin and kernel.sin. THANKS FOR ALL YOUR HELP!
Click to expand...
Click to collapse
JaneKimC said:
So I don't do anything about the purple led and just redo the steps?
Okay o_o
-edit-
whathe
I GOT IT TO FLASHMODE
After charging and having constant red led to no led (?) I unplugged from the wall charger and and then plugged to laptop to wait for bootloop. So there was red led, then after a while no led again. I just pressed down (didn't expect anything to happen lol) and then I got GREEN LED!!!! Luckily, I already set up flash tool
I installed ALL the drivers in flash tool
But there was no Ion,
right now i'm installing pc suite cause my sister said there are drivers there.
Am I doing the right move? O_O
-edit2-
MY SISTER WAS RIGHT
IT FLASHED ALL THE WAY THROUGH!!!
btw, checked Exclude TA, is that correct?
phone still won't boot (assuming no battery)
I'M CHARGING RIGHT NOW!!
will report back when it boots
sorry for page stretching!
-edit3-
HOMYGOSH I LOVE YOU ALL
THANKS SO MUCH GUYS!
HAPPY NEW YEAR!
EVERYTHING PAID OFF!!
THANKS TO EVERYONE WHO HELPED ME!!!!
SAVED ME A LOT OF $$$ ^_^
Click to expand...
Click to collapse
tempest2112 said:
Many thanks for this post as I was stuck in a ram dump boot loop and following the instructions allowed me to flash a ftf file and now the phone (Sony Miro) is up and running :victory:
Click to expand...
Click to collapse
albuah said:
i manage to get bootloop after 5-10 minutes.
got my kernel on back. tapping the sony logo and enter cwm , restore my backup , and reboot...but the phone not reboot.
screen are black and red led still there. usb still attach to pc.
need to recharge batteries to full/green led ?
update : i remove the usb cable , and use fastboot mode to flash kernel and on the phone. it boot up nicely in my miui backup with 1% battery haha...
thx to all that help me and of course to this thread
Click to expand...
Click to collapse
ganeshbiyer said:
The phone is back.
Sent from my LT28i using xda premium
Click to expand...
Click to collapse
txingu said:
Thanks ToledoJab!!
I can repair one xperia s with a format memory problem.
The phone stay in SONY logo everytime, but I can flash it again.
Thanks!!
Click to expand...
Click to collapse
Damjan94 said:
Thanks you rly helped me get my phone working again
I got it bricked by installing cwm and it didn't let me boot in os, than I formatted /system and lost cwm, all my system
I wonted to install newest cynogen mod so my question is: "can I use flasher to flash cynogen mod?"
Click to expand...
Click to collapse
dansdepeter said:
After all, I read about unbricking phone I am now in the situation of blinking red light and the phone turn on with a black screen.. then after 20min the phone fully turn-off and i charge the phone and i get solid red light.. hoping that it will be fix. Thanks to all
My Xperia ion now back to normal.. I get red light but cannot detect on laptop and all the button of xperia not working. I first run the flashtool ready to install firmware and then together with pc companion and finally the xperia green led comes up........ w/out pc companion my xperia still on red light and all button of xperia not working.. The Flashtool detect the phone and install the firmware...
Thanks to this blog..
Click to expand...
Click to collapse
gegode said:
:victory: :good: well thanks to all xda developer for this thread.. :good: :victory:
my 1 week old Sony Xperia J (rooted , v6 supercharger , stock firmware) that appears BOOTLOOP :crying:
it happens when i try to use some method "how to connect stock firmware ICS to ad-hoc" by changing wifi supplicant script..
OK ,
:silly:ENJOY UR BRAND NEW/OLD ware:silly:
:victory: WELL THATS IT ,, THATS WHAT I'VE DONE ,, you guys can follow it if you like .. i can do it , so u can. ryt? :silly:
THANKS TO THIS THREAD , AND ALL CREDIT TO ALL XDA Developer Who already tested all trick and method and provide all TOOLS :highfive:
IM NOT GOOD ENOUGH IN ENGLISH . PERIOD
Click to expand...
Click to collapse
crevatsch said:
Thanks for the answer and the miracle has happened, my phone is back from the dead. This is how i did it:
I got frustrated with the phone after it wouldn't respond to the soft reset it was trying (power + volume up). Then i pressed the volume up button while playing a game with the other while in the corner of my eye i see the light changing color and yes, it had gone into fastboot. After that i flashed the kernel only, but the phone wouldn't boot. I was angry that i let this good chance slip, but i managed to do the trick again: just keep pressing volume up, until it went into fastboot. I flashed the stock rom and my phone worked again.
Moral of the story (and something to put in the startpost): Even if the screen doesn't show anything and even if the phone doesn't vibrate or give a signal to indicate the battery is full it can still go into fastboot if you press the button repeatedly and keep trying.
Thanks for the help!
Click to expand...
Click to collapse
CoB_Mike said:
Worked like a charm for me brother. Installed something to my L28at and it was showing incorrect battery and couldnt re install original OS. Now I am good!
Click to expand...
Click to collapse
snaky47 said:
Anyone can help me please, i have strong red light and i can't flash again.
EDIT: Now, after unplugged and waiting 5 mn, i plugged again I see the logo of the battery:laugh: and it appears that it is empty after 20 hours of charging lol. I wait a bit and I'll let you know if I can flash:fingers-crossed:
EDIT2: I installed cm9 and restored my backup. everything is ok now.
Click to expand...
Click to collapse
gnahanut said:
Mine is the same problem, the kernel does not support offline charging, and the issue is that: the phone runs out of battery - It gets booted up after 5 minutes charging and then turn off. The cycle continues.
I solve the problem by:
- Let it charge till the screen boots up.
- Power + volume up for 1 vibration, and then hold volume up for fastboot mode.
- Flash adv kernel 17 and then connect to charger. Let it charge for 30 mins.
- Reflash the Rom kernel.
Everything works perfectly after that.
Click to expand...
Click to collapse
Flowa said:
Thanks it worked!
But is there a way that you can use the phone with pc companion after flashing it?
Because pc companion told me i have a wrong firmware...
Click to expand...
Click to collapse
anzsensei said:
Alhamdulillah ~ SUCCESS :good:
SUPER Thanks To Everyone Here~!!
:victory:
Click to expand...
Click to collapse
ardalaan said:
ok i after about 9 hours of charging i didn't get any response from my Phone (ion)
so i decided to open my phone and disconnect the battery cable !
after i disconnect my battery cable and plug it again i connect my phone to wall charger and get a red light LED.. after about 20 minutes red led become orange then i connect my phone to pc and start flashtool and flashed new TFT file
all i am saying is that if u don't get red light after couple of hour you have 2 options !
let the battery drain then start charging or unplug battery cable then plug it back
here is the picture of my ion's battery flat
Click to expand...
Click to collapse
Levopron said:
Yess!! I Repair.. Thank Youu!!
Click to expand...
Click to collapse
ToledoJab said:
Well I recovered my Ion.
Now for some reason I cannot flash any baseband when using win xp. I can flash basebands from ubuntu though. It took me a few hours to figure this out. Tried reboot, older version and every stock ftf I have, ics & gb. I can flash all other parts of the stock ftf. Baseband freezes flashtool up at processing the data and I have to close flashtool.
Not sure why win xp wont work, but since linux worked I dont care
I got some good tips to add to OP.
Flashing just the kernel requires less battery charge to flash and fixes offline charging.
Also unplugging the battery after back pieces are removed should eliminate the waiting for battery to die, if you can handle taking phone apart. Battery unplug should save a lot of time in both discharge and charging. If battery is full if will take days to discharge. But if you unplug it should reset and keep the charge for flashing.
Well now on to my wifes captivate glide. It keeps shutting down when data is turned on. Time to learn about odin and Samsung
Click to expand...
Click to collapse
[SOFT-BRICK RECOVERY] Recover most XPERIAs from SOFT-BRICK
If you are not sure what your doing or just want to confirm something, PLEASE ASK QUESTIONS FIRST. You always want to do the easiest things first.There many of us that have had success using different methods. And there are many of us who are willing to help.
The Wikipedia definition for {Brick (electronics)}
When used in reference to consumer electronics, a "brick" describes an electronic device such as a smart phone, game console, router, or tablet computer that owing to a serious misconfiguration, corrupted firmware or a hardware problem, can no longer function. The term derives from the vaguely cuboid shape of many electronic devices (and their detachable power supplies) and the suggestion that the device can only function as a large, heavy object.
The term can also be used as a verb. For example, "I bricked my MP3 player when I tried to modify its firmware."[1]
In one common sense of the term, "bricking" suggests that the damage, often a misconfiguration of essential on-board software, is so serious as to have rendered the device permanently unusable.
However, another use of the term "bricked" is understood to describe a situation where a device is unable to function even when the device does have potential to be recovered later to a working state. In this sense, the damage may be reversible; it is only during the period that it's unable to function that the device is deemed "bricked". This is often referred to as a "soft brick" whereas an unrecoverable device is a "hard brick".
DON'T WORRY, BE PATIENT, YOU CAN FIX YOUR PHONE.
This common 'cents' is worth more than a million dollars the price of your phone
accts said:
My two cents, always install CWM - Backup your ROM, before doing any modding to your phone.
Click to expand...
Click to collapse
For this guide I will define types of RESETS that happen when pressing both the POWER and VOLUME UP buttons.SOFT RESET = 1 vibration then let go of buttons (hold about 3 seconds); Like hitting REBOOT.
HARD RESET = 3 vibrations then let go (about 10 seconds); Like taking out the battery.*
*USE HARD RESET ONLY IF ALL OTHER TRICKS HAVE FAILED. RECOVERY FROM THIS DEEP LEVEL OF SOFT-BRICK WILL TAKE A LONG TIMEBoth can be used at anytime on a working phone. Most bootloops will also allow resets
XPERIA phones have 2 different modes that are used in recovering from SOFT-brick. FLASH mode & FASTBOOT mode.FLASH mode, is used by FLASHTOOL and can be used on every model of XPERIA phone with a locked or unlocked bootloader. FLASH mode will give a soild GREEN notification led when connected. To connect in FLASH mode:
Start with the phone turned off (or in between loops for some tricks)
Press and HOLD the volume DOWN button. (don't let go )
Now connect to a PC using USB
If all went correctly you will get GREEN led, then let go of button
FASTBOOT mode is used by Android Debug Bridge (ADB), and is found on every Android device. FLASHTOOL also uses FASTBOOT mode, however to flash this way you need an UNLOCKED bootloader. NOT EVERY PHONE CAN USE FASTBOOT. To find out if you can use FASTBOOT and how to set it up read {Spectre51's} thread on {unlocking & relocking bootloaders}. FASTBOOT mode will give a soild BLUE notification led when connected. To connect in FASTBOOT mode:
Start with the phone turned off (or in between loops for some tricks)
Press and HOLD volume UP button. (don't let go )
Now connect to a PC using USB
If all went correctly you will get BLUE led, then let go of button
To recover your phone you need to have FLASHTOOL ready and waiting at a specific spot.
If you need help with setting up & using FLASHTOOL {>>CLICK HERE<<}
DO NOT CONNTECT YOUR PHONE
First you need to have FLASHTOOL installed from {HERE}
Now run FLASHTOOL.
From FLASHTOOL home, select the flash/lightning bolt button
Select FLASH MODE
Select your stock firmware file
WIPE: everything
If available EXCLUDE: TA. (this option is not available for all stock.ftf files, if it's there just exclude it)
Now click START button
After FLASHTOOL prepares files, you should get this screen (or similar depending on version of FLASHTOOL)
>>>>>STOP<<<<< FLASHTOOL is now ready for TRICKS
For help with finding your phones STOCK.ftf file click here
You can use the file for your XPERIA model below to recover from SOFT-brick.
To make your models specific .ftf file after you recover, you will find instructions {IN THIS POST}
MAKE SURE YOU USE A STOCK FIRMWARE FOR YOUR MODEL XPERIA. Each phone model has a different file. Using the wrong file will give you the very SOFT-brick your trying to fix. If your not sure then ask for help.
Links to STOCK FIRMWARES
XPERIA P{LT22}
XPERIA V{LT25}
XPERIA S{LT26}
XPERIA SL{LT26ii}
XPERIA Acro S{LT26W}
XPERIA ION{LT28}
XPERIA TX{LT29}
XPERIA T{LT30}
XPERIA TL{LT30at}
XPERIA TIPO{ST21}
XPERIA TIPO DUAL{ST21_2}
XPERIA MIRO{ST23}
XPERIA U{ST25}
XPERIA J{ST26}
XPERIA GO{ST27}
XPERIA Sola{MT27}
Special THANKS go to the following XDA members for providing and maintaining links for the STOCK.ftf files above. Please click their THANKS button in the post you download from.
{dimon2242} {championswimmer} {Yakandu} {NomNomM} {zhuhang} {Spectre51} {hhlong89} {gregbradley} {Jozinek} {TeamMex} {Deadmask} {irontech}
PC Companion can interfere with FLASHTOOL. Make sure it is NOT running when using FLASHTOOL.
BATTERY CHARGING CYCLES
On a working phone there are different stages of a battery's charging cycle. The stages are listed in order they happen. The cycle goes from a completely dead battery through a phone running on battery and back to a completely dead battery.
Dead battery. No response from the power button, no screen and no led.
Connect to charger
low battery level charging mode. This is when just the RED led is on and no screen. At this stage the battery's charge is to low to turn the phone on, but it is charging.
Kernel controlled off-line charging mode. This is when the battery has charged enough from step (3) and boots the kernel to charge the battery. The phone is off, but could be turned on using the power button. A quick press of the power button will show this battery icon. Icon will fill with charge.
The kernel also controls charging when the phone is on.
Battery is fully charged.
Unplug the phone and turn on.
Battery is dead from normal use.
Repeat stages starting at (1)
Now, that is for a working phone. But if your reading this you don't care about a working cycle right? WRONG, this gives a baseline of charging check points to help in recovering your phone, so it is fairly important to understand.
A soft-brick charging cycle can restart at different points along the baseline while attempting to boot.
The kernel is the first thing to run at start-up.
If the kernel is broken the phone may.....
Lock-up before the kernel boot screen with just the back-light on.
Lock-up at the kernel boot screen.
get stuck in boot loops.
The SONY screen is displayed during kernel start-up, for a stock kernel.
A charging cycle for a phone with a broken kernel can go as far as stage (4) and then lock up or boot loop. Then the battery will have to die for the phone to reset and start over at step (1).
Thus ending a broken kernel cycle from dead battery to dead battery.
The system or ROM/firmware runs after the kernel starts successfully.
If the ROM is broken the phone may.....
Lock-up after the kernel screen with just the back-light on
Lock-up at the ROM boot screen
Get stuck in boot loops.
The XPERIA screen is displayed during ROM start-up, for a stock ROM.
A charging cycle for a phone with a broken ROM can go as far as stage (6) and then lock up or boot loop. Then the battery will have to die for the phone to reset and start over at step (1).
Thus ending a broken system cycle from dead battery to dead battery.
{SONY's PC Companion}
AN UNLOCKED BOOTLOADER WILL NEED TO BE RE-LOCKED FOR PC COMPANION TO WORK.
Thanks this is very helpful
thank you! Worked perfect!! as hard as it was to let the battery die I did it and she worked!!!
Before you wait all that time, try this. Hold the volume up button and the power button at the same time. The phone will vibrate once, keep holding until it vibrates 3 more times. Now you should be able to try flashing again. Worked for me.
44Blackhawk said:
Before you wait all that time, try this. Hold the volume up button and the power button at the same time. The phone will vibrate once, keep holding until it vibrates 3 more times. Now you should be able to try flashing again. Worked for me.
Click to expand...
Click to collapse
+1
In my case, trying to reset didn't work at all.
Yea same here as I could not get mine to do anything. I saw in another thread on this someone said once you get the Sony loop to do a force reset (1 buzz) and as soon as it buzz's hold volume down. You should see the green light flash and should then be able to connect it in flash mode again. Adds up with what I did and its very strange there is so much difference from device to device on a shared issue.
Edit: Pop why did you bale on the Ion???
The AHD is more responsive and the screen seems to be brighter and more clear and the glass was already scraching and the gorilla glass on the AHD will not.
Well was nice to have your help for as long as we did. Enjoy your new device.
popfan said:
The AHD is more responsive and the screen seems to be brighter and more clear and the glass was already scraching and the gorilla glass on the AHD will not.
Click to expand...
Click to collapse
The glass or the clear cover over it was?
Sent from my Sony Xperia S
popfan said:
The AHD is more responsive and the screen seems to be brighter and more clear and the glass was already scraching and the gorilla glass on the AHD will not.
Click to expand...
Click to collapse
Also known as Xperia ion lt28h.
General 2G Network GSM 850 / 900 / 1800 / 1900 3G Network HSDPA 850 / 900 / 1700 / 1900 / 2100 Announced 2012, April Status Available. Released 2012, June Body Dimensions 133 x 68 x 10.8 mm Weight 144 g - Touch-sensitive controls Display Type LED-backlit LCD, capacitive touchscreen, 16M colors Size 720 x 1280 pixels, 4.55 inches (~323 ppi pixel density) Multitouch Yes, up to 4 fingers Protection Scratch-resistant glass - Sony Mobile BRAVIA Engine
- Timescape UI Sound Alert types Vibration; MP3 ringtones Loudspeaker Yes 3.5mm jack Yes
Spectre51 said:
The glass or the clear cover over it was?
Sent from my Sony Xperia S
Click to expand...
Click to collapse
The glass itself. It has several small scratches into before I turned it in, just 28 days later. That is rather poor scratch-protection.
Does the Ion have the film over the glass like the Play did?? My Play scratched one day when I dropped it but figure I will just find me a high quality screen protector and replace it. Maybe some 3m product. I looked on the Ion and could not tell if it has it or not.
zackspeed said:
Does the Ion have the film over the glass like the Play did?? My Play scratched one day when I dropped it but figure I will just find me a high quality screen protector and replace it. Maybe some 3m product. I looked on the Ion and could not tell if it has it or not.
Click to expand...
Click to collapse
Yes it does.
Sent from my Sony Xperia S
popfan said:
The glass itself. It has several small scratches into before I turned it in, just 28 days later. That is rather poor scratch-protection.
Click to expand...
Click to collapse
The only way you could scratch the glass itself is if you removed the oem screen protector. You can't really tell its there until you know it's there. The X10 was the same way.
The included screen protector does scratch fairly easily and looks like scratched glass when it happens.
Sent from my Xperia ION using xda premium
if my screen is stuck on xperia logo. NOT BOOT LOOP. just stuck there. (unable to hard reset) cannot turn phone.
is this soft brick?
I performed these steps and it worked one time but when I did it a second time, it bricked my phone. It won't respond to any thing. Can somebody please help?!?
EDIT: Sorry guys, I freaked out last night and posted this before I did my reSEARCH. This is my problem now, I've been charging for phone for >9 hrs and it still hasn't turned on. It took about 6 hrs to get the red led light. When it came on, it was solid and not blinking. Should I just be patient?
You did not hard brick your phone. You will just have to do the steps all over again. Wait until the battery dies, then recharge and reflash. Make sure you battery is over 50%.
Just be patient and persistent. It can be very frustrating but you will get back in.
Hello i have recently tried to return my phone from cyanogenmod into the stock rom using this thread: "https://forum.xda-developers.com/moto-x-style/general/guide-return-to-stock-relock-bootloader-t3489110" and my phone got stuck in the process while making the command "fastboot flash bootloader bootloader.img". And now my device is stuck on boot loop showing the cyanogenmod loading screen.
Anyway now i found a way to get to stock but for that i need to get my device into fastboot. THE PROBLEM IS that my device can't get now into fastboot! i have tried using adb commands but the adb doesn't recognize the device. I have tried fastboot commands but again it doesn't recognize the device. I also tried button combinations, but it didn't work.
Until the incidence i have used to press the power button+ vol down keys to get into fastboot mode, but now it doesn't work. I suspect that it doesn't work since in order to get into fastboot with the button combination i need to first get the device turned off. But when i connect my device to the charger it shows the battery charging screen and the device is stuck on that screen even if it has disconnected from the charger, and it will keep on that screen until the battery has depleted. I have tried shutting it down using the power button but then my phone gets into a loop with the cyanogenmod loading screen, and even if i turn it off it restarts instead.
p.s I have used to think that my fastboot was deleted but on an other thread i have been told that as long as i see the cyanogenmod loading screen of the OS that means i have a boot-loader.
Please help!
I want to get into Fastboot on my Moto Pure.
Thanks a lot
Eden.
Power down 1st
Try volume down & power key together. That will get you into fastboot directly.
Oops just seen that, my bad, I wont respond anymore.
Sent from my Portable
PassatSport15 said:
Power down 1st
Try volume down & power key together. That will get you into fastboot directly.
Oops just seen that, my bad, I wont respond anymore.
Sent from my Portable
Click to expand...
Click to collapse
Haha, as said. can't power off.
Np thanks for responding!
Anyone got an idea?
u cant poweroff does that means your phone is continuously bootlooping or its just booting but takes a hell lotta time to boot up?
Sagar_1401 said:
u cant poweroff does that means your phone is continuously bootlooping or its just booting but takes a hell lotta time to boot up?
Click to expand...
Click to collapse
I think @edenah is saying it just gets stuck at the loading screen. If the battery discharges all the way and the device is plugged in, the battery symbol shows and after the charger is unplugged, the battery charging doesn't go away until the battery dies again or the power button is pressed (which leaves us right back to where we started)
edenah said:
Hello i have recently tried to return my phone from cyanogenmod into the stock rom using this thread: "https://forum.xda-developers.com/moto-x-style/general/guide-return-to-stock-relock-bootloader-t3489110" and my phone got stuck in the process while making the command "fastboot flash bootloader bootloader.img". And now my device is stuck on boot loop showing the cyanogenmod loading screen.
Anyway now i found a way to get to stock but for that i need to get my device into fastboot. THE PROBLEM IS that my device can't get now into fastboot! i have tried using adb commands but the adb doesn't recognize the device. I have tried fastboot commands but again it doesn't recognize the device. I also tried button combinations, but it didn't work.
Until the incidence i have used to press the power button+ vol down keys to get into fastboot mode, but now it doesn't work. I suspect that it doesn't work since in order to get into fastboot with the button combination i need to first get the device turned off. But when i connect my device to the charger it shows the battery charging screen and the device is stuck on that screen even if it has disconnected from the charger, and it will keep on that screen until the battery has depleted. I have tried shutting it down using the power button but then my phone gets into a loop with the cyanogenmod loading screen, and even if i turn it off it restarts instead.
Click to expand...
Click to collapse
Try this:
Hold power button for 10-20 sek, when screen will turn off hold only vol-(at bootloop screen).
You should flash stock without "oem" commands.
Find how to update bootloader.
aybarrap1 said:
I think @edenah is saying it just gets stuck at the loading screen. If the battery discharges all the way and the device is plugged in, the battery symbol shows and after the charger is unplugged, the battery charging doesn't go away until the battery dies again or the power button is pressed (which leaves us right back to where we started)
Click to expand...
Click to collapse
Yes thats exactly what i mean.
dzidexx said:
Try this:
Hold power button for 10-20 sek, when screen will turn off hold only vol-(at bootloop screen).
You should flash stock without "oem" commands.
Find how to update bootloader.
Click to expand...
Click to collapse
tried this, but the device still goes into the cyanogenmod loading screen.
its soft brick but can't be fixed (just thinking any method but no idea man)
get your phone to moto service centre and they can only fix it (or maybe not) caus this is worst case happening to you
if any pro dev read this thread he might be able to answer but badluck (nobody gives a ....)
btw when you connect your phone to pc does it shows unknown device or it just charge the phone?
Sagar_1401 said:
its soft brick but can't be fixed (just thinking any method but no idea man)
get your phone to moto service centre and they can only fix it (or maybe not) caus this is worst case happening to you
if any pro dev read this thread he might be able to answer but badluck (nobody gives a ....)
btw when you connect your phone to pc does it shows unknown device or it just charge the phone?
Click to expand...
Click to collapse
:/
It recognizes it as portable usb device.
And well. I have bought the device in the us but i live outside of the US. so its bit problematic to return it now. Some help could do the trick!
I found SP flash tool and i believe it would do the trick. But i need to get the scatter loading file of the moto pure, but i can't find it anywhere, maybe anyone got the idea how to get that?
edenah said:
:/
It recognizes it as portable usb device.
And well. I have bought the device in the us but i live outside of the US. so its bit problematic to return it now. Some help could do the trick!
I found SP flash tool and i believe it would do the trick. But i need to get the scatter loading file of the moto pure, but i can't find it anywhere, maybe anyone got the idea how to get that?
Click to expand...
Click to collapse
We haven't been able to get the QLoad files for most Moto devices, at least not for the last 2-3 years... Sorry.
Well i have found a way to get the device charged while the screen is off!
If i connect it to my computer while pressing the power button and the vol down button and keep pressing it, the device stays turned off!
Now i'm trying to play with it, to turn the bootloader. so far the classical power and vol combo doesn't work.
edenah said:
Well i have found a way to get the device charged while the screen is off!
If i connect it to my computer while pressing the power button and the vol down button and keep pressing it, the device stays turned off!
Now i'm trying to play with it, to turn the bootloader. so far the classical power and vol combo doesn't work.
Click to expand...
Click to collapse
I am stuck. No button combination works. I suspect that the device isn't really off but the display is just closed. As even to open up the device takes a reallly long press on the power button.
if it got interrupted while flashing bootloader, you're pretty much not going to be able to do anything.
motorola service center is likely the only place that can fix it.
sorry for your luck.
edenah said:
Haha, as said. can't power off.
Np thanks for responding!
Anyone got an idea?
Click to expand...
Click to collapse
ericpeacock79 said:
if it got interrupted while flashing bootloader, you're pretty much not going to be able to do anything.
motorola service center is likely the only place that can fix it.
sorry for your luck.
Click to expand...
Click to collapse
exactly that's what I'm saying but he needs to get his phone to USA as he specified..
only a specialist can help ya
Sagar_1401 said:
exactly that's what I'm saying but he needs to get his phone to USA as he specified..
only a specialist can help ya
Click to expand...
Click to collapse
i see :'(
Ok Thank your guys
I guess its a lost cause.
edenah said:
i see :'(
Ok Thank your guys
I guess its a lost cause.
Click to expand...
Click to collapse
Lost cause? No, probably not... Do you know anyone in the US you trust well enough to receive the phone from repair and ship it to you where ever you are? I believe that is all you need. The US service center cannot ship outside of North America (maybe US), but they can receive packages from anywhere. If you had a US contact that could receive the device and forward it on to you it might be worth it to get it fixed if it is still under warranty, if it isn't, then it might not be worth fixing. Lots of things to consider here.