I hav an sg3 running on kyrillos rom 5.7 with fugumod 2.4 beta 3( 800mhz edition)
and Setcpu application. Can Somebody tell me how to overclock the device.......currently the scale in setcpu is til 667mhz.
Just slide the bar in setcpu to 800
And put it on ondemand
guys the scale is showing till 667 mhz and not beyond!
Are you CERTAIN you downloaded and flashed 800mhz OCversion?
If so you might try reflashing or flash a different version. Personally I'm using 2.2 Bleeding Edge version OC to 1300mhz ondemand - after trying same version as you - and can report that I found no issues with either.
I had this problem too . Try reinstall setcpu its working to me ,sorry for bad english
I m seeing that many of people facing problem in changing kernel (g3mod to fugu or fugu to g3mod) like bootloop, 0kb internal memory. so i m giving a small trick. First of all remove your sdcard and then delete the folder named Android then flash kernel with odin as one pack then insert your sdcard.
Always prefer flashing kernel via odin as one pack, use cwm only when u dont have pc
And u have to accept that all cpu can not handle 1400mhz. if your fon can not handle such high clock rate then use ultimate. there is no need to overclock to 1400mhz for simpe and daily use, overclck only when u need it like gaming. i use ultimate at 800mhz at ondemand and max 400mhz conservative at screen off.
If I want to hav long lasting battery life, which kernel do i flash?
osbozzy said:
If I want to hav long lasting battery life, which kernel do i flash?
Click to expand...
Click to collapse
Use performance or ultimate with some basic setcpu profiles like screen off, ondemand. i think all of us have huge battery drain problem during 3g data connection.
Mohanshbhr said:
I m seeing that many of people facing problem in changing kernel (g3mod to fugu or fugu to g3mod) like bootloop, 0kb internal memory. so i m giving a small trick. First of all remove your sdcard and then delete the folder named Android then flash kernel with odin as one pack then insert your sdcard.
Always prefer flashing kernel via odin as one pack, use cwm only when u dont have pc
And u have to accept that all cpu can not handle 1400mhz. if your fon can not handle such high clock rate then use ultimate. there is no need to overclock to 1400mhz for simpe and daily use, overclck only when u need it like gaming. i use ultimate at 800mhz at ondemand and max 400mhz conservative at screen off.
Click to expand...
Click to collapse
actually wat u r saying is to delete /sdcard/android/data/fugumod & /sdcard/android/data/g3mod ... but that dsnt make any sense ...
ranadip.bswas said:
actually wat u r saying is to delete /sdcard/android/data/fugumod & /sdcard/android/data/g3mod ... but that dsnt make any sense ...
Click to expand...
Click to collapse
/sdcard/android/data/fugumod this is to be deleted if you plan to use G3Mod and vice versa.
I like fugumod a lot, but currently using G3Mod Ultimate, clocked at 200-1200 MHz in SetCPU using OnDemand Governor and have its working awesome, with good battery backup, data is on, even used GPS for a couple of hours.
-----------Regards and God bless------------------------
Umang Sagar
Samsung Galaxy 3 I5801 (highly underrated Cellphone)
Android 2.2 Build no : Froyo.XXJPS
Baseband Version: I5800XXJP4
Kernel: G3Mod Ultimate 1.3.4 (most stable OC Kernel)
SetCPU : 200 Mhz to 1200 Mhz, (Governor - On Demand)
8 GB Class 4 SD Card
Used Lagfix for I5801 (post lagfix internal Memory 1.2 Gb)
Quadrant Score : 710+
No Heating, No Lags, No freezes anymore
umangsagar said:
/sdcard/android/data/fugumod this is to be deleted if you plan to use G3Mod and vice versa.
I like fugumod a lot, but currently using G3Mod Ultimate, clocked at 200-1200 MHz in SetCPU using OnDemand Governor and have its working awesome, with good battery backup, data is on, even used GPS for a couple of hours.
-----------Regards and God bless------------------------
Umang Sagar
Samsung Galaxy 3 I5801 (highly underrated Cellphone)
Android 2.2 Build no : Froyo.XXJPS
Baseband Version: I5800XXJP4
Kernel: G3Mod Ultimate 1.3.4 (most stable OC Kernel)
SetCPU : 200 Mhz to 1200 Mhz, (Governor - On Demand)
8 GB Class 4 SD Card
Used Lagfix for I5801 (post lagfix internal Memory 1.2 Gb)
Quadrant Score : 710+
No Heating, No Lags, No freezes anymore
Click to expand...
Click to collapse
If i Flash a NON OC ROM (like Kyrillos 7.0), but use a OC-able Kernel (like Fugumod or G3),will i be able to OC ?
marcelloLins said:
If i Flash a NON OC ROM (like Kyrillos 7.0), but use a OC-able Kernel (like Fugumod or G3),will i be able to OC ?
Click to expand...
Click to collapse
oc depends only on kernel not rom, if want to oc then flash a oc kernel first and then set frequency with set cpu, prefer flashing as one pack via odin
marcelloLins said:
If i Flash a NON OC ROM (like Kyrillos 7.0), but use a OC-able Kernel (like Fugumod or G3),will i be able to OC ?
Click to expand...
Click to collapse
Yes....................
marcelloLins said:
If i Flash a NON OC ROM (like Kyrillos 7.0), but use a OC-able Kernel (like Fugumod or G3),will i be able to OC ?
Click to expand...
Click to collapse
Definately you can do it, infact thats what i do...Flash the ROM that you want as one package using ODIN (kyrillos v7 I have tried and i am too small to comment on it, but its an amazing ROM, very fast and has all necessary things you would want in your ROM). After flashing the ROM, you can download and flash any Kernel that you want again using ODIN as one package. (let me know if you want in detail about any of the process or if you want any Kernel, everything is available in XDA). If you want to go for Kyrillos ROM, after unzipping the file, you can find the v4.01 OC kernel in the Extras Folder which you can flash with ODIN. A wipe is recommended before and after the process is over.
Hope this solves your dilemma, you can anytime reach me for any info that I may be able to provide.
Take care.
-----------Regards and God bless------------------------
Umang Sagar
Samsung Galaxy 3 I5801 (highly underrated Cellphone)
Android 2.2 Build no : Froyo.XXJPS
Baseband Version: I5800XXJP4
Kernel: G3Mod Ultimate 1.3.4 (most stable OC Kernel)
SetCPU : 200 Mhz to 1200 Mhz, (Governor - On Demand)
8 GB Class 4 SD Card
Used Lagfix for I5801 (post lagfix internal Memory 1.2 Gb)
Quadrant Score : 710+
No Heating, No Lags, No freezes anymore
I do have both directories:
/sdcard/android/data/fugumod AND /sdcard/android/data/g3mod
My experience is that you have to have the SAME "fs.current" files inside both.
then you can change the Kernels (FUGU or G3MOD) without changing anything, assumed the data in "fs.current" are matching the file systems.
umangsagar said:
/sdcard/android/data/fugumod this is to be deleted if you plan to use G3Mod and vice versa.
I like fugumod a lot, but currently using G3Mod Ultimate, clocked at 200-1200 MHz in SetCPU using OnDemand Governor and have its working awesome, with good battery backup, data is on, even used GPS for a couple of hours.
-----------Regards and God bless------------------------
Umang Sagar
Samsung Galaxy 3 I5801 (highly underrated Cellphone)
Android 2.2 Build no : Froyo.XXJPS
Baseband Version: I5800XXJP4
Kernel: G3Mod Ultimate 1.3.4 (most stable OC Kernel)
SetCPU : 200 Mhz to 1200 Mhz, (Governor - On Demand)
8 GB Class 4 SD Card
Used Lagfix for I5801 (post lagfix internal Memory 1.2 Gb)
Quadrant Score : 710+
No Heating, No Lags, No freezes anymore
Click to expand...
Click to collapse
Hi umang,
Would you be so kind to give the links to your setup?
I would like to try out the same config as yours.
Or even better:
Are you able to send me a rom to flash my phone?
I use Kyrillos7 now, but locks at startup allot.
Godyn said:
Hi umang,
Would you be so kind to give the links to your setup?
I would like to try out the same config as yours.
Or even better:
Are you able to send me a rom to flash my phone?
I use Kyrillos7 now, but locks at startup allot.
Click to expand...
Click to collapse
If it locks up at start up, rather than reflashing ROM, you can just flash G3Mod Ultimate Version Kernel 1.3.4 which i used with Kyrillos7 ROM in past and it worked great for me...again I used the same Governor Specs.
However my Specs as you requested above are given below with links, (please give credits to original developer where ever applicable as I am not a developer myself (though I would have loved to be one), thanks)
Here you go
for XXJPS : http://forum.xda-developers.com/showthread.php?t=1125387
-------------------------------
Kernel: G3Mod Ultimate 1.3.4 : http://www.multiupload.com/TEQXRZMKPQ
Credit for the Kernel goes to DharamG3
-------------------------------
SetCPU : 200 Mhz to 1200 Mhz, (Governor - On Demand) : http://forum.xda-developers.com/showthread.php?t=505419 Or Google
-------------------------------
Other Tweaks that i implemented
1. Lagfix : http://forum.xda-developers.com/showthread.php?t=892512
2. JIT : http://forum.xda-developers.com/showpost.php?p=16187138&postcount=6
OR
http://forum.xda-developers.com/showthread.php?t=1026870
3. SD Card Fix : Download two applications from the market a) SD BOoster b) SD Tools...Now in the SD Booster try values 512, 1024, 2048, 3072 & 4096 and for each value check the reading 3 times in SD Tools...so you will know at what value your SD Card is working fastest.
Again i would recommend, rather than doing all this, use G3Mod 1.3.4 Ultimate Kernel with Kyrillos7 ROM which has most of these and many other features.
-------------------------------
I used white rabbit since first version, awesome rom, except 1.8 that i hate a bit but generaly AWESOME, tried other roms... a lot of roms but nothing like as wr roms. Only speak about me defy+ bl7 cwm bootmenu recovery 5.0.6 and 2nd init 1.4 or 1.7 dont remember exactly, but think version 1.4 installed.
Questions:
1.
setcpu, 4 vsels actives 300/17 600/32 800/42 1000/52 ondemand .all modules. sched:0 and all other options untouched, by default
300 40/%
600 2-8%
800 1-7 %
1000 45-57%
think that vsel 2 and 3 rarely used, why? Is it caused by a bad voltages configuration?
2.
Defy+ need or not need a fix for battery
What we rely to some users with the same phone with the same rom
make use or not use of the fix?
thank you guys!
I want to know if exists a kernel with good performance and reliability with overclock possibilities and DT2W on the "market" did anyone found a good one? i want a good kernel specially for gaming and reliability and DT2W if is possible , thank you very much !
EDIT: I tried a benchmark tool but i forgot to close ~6 Apps lol ,bellow is the result , good or not for 5.1 Stock W/ Stock kernel?
No one know a good kernel? come on guys , i trought you guys are specialists .. :silly:
Tried some kernels like AK kernel & franco kernel but both of them are unstable , at least on stock 5.1 ... can anyone please reccomend me a good , stable one ?
I'd suggest you Quanta kernel
TheGrinder77 said:
I'd suggest you Quanta kernel
Click to expand...
Click to collapse
Thanks for the reply bud , i want to use a stable one with overclock possibilities , did you use/used it? could you overclock the device with the kernel installed? what about the battery life , i preffer to ask before installing one wich possibly could not be good for the device needs ..
Yeah I'm currently using it with chroma rom.. You can overclock up to 1728mhz but personally I prefer underclocking for great battery life (more than 5h SOT)
Ok , so i flashed the Quanta V3 then tuned with Kernel Adiutor , runned a AnTuTu benchmark , low score ( about 26.600 ) then Quadrant Standard ( 5.713 max ) then Vellamo ( 794 on multicore ) 891 on metal ... i don't know what's wrong .. i overclocked it , changed the governor to performance , locked the frequency , upvolting , nothing , maybe a bit higher score than previsourious ... the best performance i got was with the AK kernel ( see the pic below ) that's the highest score i ever got i don't know what's wrong , maybe because i'm using stock rom? i don't like custom roms not on this phone , at least ... should i use a stock based modified kernel for 5.1.0 ?
Just scored 29999 on antutu by only changing max frequency to 1728mhz and governor to interactive. If I remember correctly AK has higher overclock frequencies so that could be the reason for higher scores
TheGrinder77 said:
Just scored 29999 on antutu by only changing max frequency to 1728mhz and governor to interactive. If I remember correctly AK has higher overclock frequencies so that could be the reason for higher scores
Click to expand...
Click to collapse
Yes , on AK you can overclock up to 1.944 ghz but it drains much more battery than Quanta , i think it doesen't exist a good kernel a reliable one ... for this momment i preffer stock kernel with stock rom , i don't like custom roms because them are so slow and unstable , the kernels eat to much battery , that's why stock is better here ...
Hi guys
On stock rom pie version Android 3.31.401.1
Comparison between two kernels who I can install on the phone Htc u 11 show
In my opinion, the kernel ex is better because with the test I did, ex kernel frequency remains minimum on 300 , while it is at rival kernel at 960, and this has a great effect on battery consumption.
Of course, this is at rest and idling, and the second test at working pressure where the two kernels are no different.
what is your opinion?
Looks like I'm having trouble using this EX kernel. Sometimes mobile data crashes. Of course I have to check more
stock kernel >>>>> ex + clean
Checked . Ex kernel no problems. Issue has stock kernel
Is it possible to revert to stock kernel from cleanslate?