For Last 2 Weeks I was want to connect My Htc Hero to my laptop but i was Have a problem I was not able to connect My hero to the laptop and the Mobile was not able to find the Htc sync on the laptop I search for long hours and read lots of threads about fixing this problem But no one work i instill uninstall the driver . Update it tried almost every way but it was the same so suddnely i got idea and i try it it works like a charm and every thing back to normal So i liked to share this here may be it will Be usfule for some one else and not lost like me
All you Have to do is that
1- before Connecting the mobile Disconnect any other external driver that connect to laptop or the Pc Like Multi USB Port Hub or 3G or 4G dongle or Internet stick for my i disconnect every thing even external Mouse and Keyboard or external camera too in My case the problem was because The Multiple USB port hub For PC you can keep the key board and Mouse
2- Dont Forget to turn On USB and change the from charge to sync
3-connect your Mobile wait till the windows instill the driver open htc sync and it will start work again
Hope this will be useful for every one ..............
good tip. Thanks. I will try that.
Related
I 'suddenly' am unable to have my JasJar connected to Activesync. I have been successfully connecting the last two weeks and did not cahange anything to the PC's set-up.
I killed my antivirus and have no firewall software running.
I have a direct USB connection to my Laptop (no usb hub).
I have tried both Activesync V4.0 and V4.1.
I have deleted all partnerships to get a fresh start.
I have also tried to delete the PPC in the PC's device manager and connect again (I did notice the PPC was listed under the network adapters only, nothing was listed under the USB section).
Nothing seems to help and I am really desperate since I can not sync anything anymore now.
Any suggestions are more than welcome !
Thansk in advance,
Paul
have you tried another PC ? at least this way you can be sure that everything is ok .
I am travelling and will not have any access to another PC before the WE.... I did try another cable but got not lucky..
It does seem to work on another PC.
Anybody any suggestion as to what else I could try to make it work again?
firewall?, thats my pain on my work lappy, i have to vpn into work and that blocks my JJ, i get connecting but no connected, all i can do is disconnect from work which then opens the activesync ports back up. check 7438 and 5679 on your firewall
After a week with AS 4.0 I suddenly found that the only way I could get it to work was to soft reset the Jas Jar while connected. I'm guessing you've already tried that though...
yer, i forgot to say, i can only sync when my JJ has been off for 10+ seconds, if on i get a uab device error if off i connect no problems, this kinda leads me to think that the usb port is in a different mode when on to when on standby, but the usb hosting of devices appears not to be the reason
Carnivor said:
yer, i forgot to say, i can only sync when my JJ has been off for 10+ seconds, if on i get a uab device error if off i connect no problems, this kinda leads me to think that the usb port is in a different mode when on to when on standby, but the usb hosting of devices appears not to be the reason
Click to expand...
Click to collapse
I have the same problem. Get a kind of "USB not recognized" when the jasjar is on/open".
I close the Jasjar after having taken the USB out of course.
Then, after a while ( You say 10 seconds) it works fine and Activesync starts the job.
I can live with it. No soft reset needed.
Very positive to me is the fact that I can also connect to a USB HUB. So no need to plu it directly in my portable.
After connection I can open my little toy. (Gush how I love this thing)
Huib
Yes I have the same problem I only synk when the jasjar is turned off. Most probably one of the reasons apart from firewall issus is office 2003. They said to me from club-imate support that we need the newest office 2003 with sp1.
Hey all,
I have some generic BT dongle for my computer that I bought a year or so ago to use with my old HTC Typhoon. The dongle allowed my phone at the time to ActiveSync over BT using the BluSoleil software that came with the dongle. However, with the HTC Wizard (MDA vario body with the AKU 3.3), I cannot for the life of me sync over BT. I have no idea what I need to set up and every time I try and do a new "partnership" in the phone for syncing over BT - i select my computer in the devices, yet nothing happens. I cannot establish any COM port communication with the computer and the only type of services that i can push are the vCard from the computer and a "personal area network"...
HOWEVER, if I take my Wizard and connect it to my Thinkpad T60 laptop that has native BT; I can sync to my hearts content... so... someone please give me a clue as to wtf I am supposed to do here to get this to work over BT
Thanks!!!
Anyone? Plweeze?
C'mon, someone must have an idea!
Gave up
I had the same dongle, or at least mine also came with Blue Soleil. I hated that software - it runs a dozen different programs that clog the computer and still doesn't connect properly. I took it off and tried the native MS XP software. It would work once, but when I put the PC to sleep I would have to reboot to get it to connect again. I finally realized that it was much easier to use a cable and gave up. I'll try again when I get a PC with built-in bluetooth.
prestonmcafee said:
I had the same dongle, or at least mine also came with Blue Soleil. I hated that software - it runs a dozen different programs that clog the computer and still doesn't connect properly. I took it off and tried the native MS XP software. It would work once, but when I put the PC to sleep I would have to reboot to get it to connect again. I finally realized that it was much easier to use a cable and gave up. I'll try again when I get a PC with built-in bluetooth.
Click to expand...
Click to collapse
Where did you get the native XP software? I could never find the native software
Plug and Play
If you don't install software, XP will operate it.
Hi everyone,
Since I'm new with this phone (just bought it few days ago) I really need your assistance.
My problem is probably with the usb drivers (Mass storage device). I'm running on Vista Ultimate SP2. When I connect the phone, and go to the notifications, there are two (as supposed to be). HTC Sync and the one with the USB connection. Well the one with the USB connection appears and disappears all the time.
As a result I can't sync since there is a problem with the USB driver. When I disable the Mass storage device (this is the one responsible for that), I can sync. The problem is I can't use my phone as a storage card in order to copy files. In advance I'm saying that I tried to mount the sd card...nothing.
I've tried the phone on other pcs, XP and vista... it workds everywhere fine. The notification with the USB connection is not disappearing.
Tried everything, rolling back the driver, updating etc. nothing!!
PLEASE HELP ME!!
Thanks in advance
Also remember than not all USB cables are the same.
I'm not using the original one as I lost it with the original box.
But while the Nokia DKE-2 works great for all functions, my camera and my USB HD mini-USB cable only support few features.
All of them can charge the Hero, though.
The one I'm using is the original one! Moreover, the phone connects properly with other pcs!
Kyrillos said:
The one I'm using is the original one! Moreover, the phone connects properly with other pcs!
Click to expand...
Click to collapse
So the problem is Vista.
I personally used XP with only some minor problems due to the cable.
http://forum.xda-developers.com/showthread.php?t=557310
It should not be Vista... I've tried it on another pc with Vista.... no problem!!
Oops, ignore this.
Have you tried different USB port on the sick Vista PC?
Have you installed Andrid specific USB drivers? If so, uninstall and reinstall.
When you plug the cable do you get on the phone the notification for USB connection?
Adding a question to the topic:
I own a Galaxy right now and consider switching to the Hero, one thing that does not work with the Galaxy is the USB connection to my car for audio playback. The USB interface of my car can't handle multiple drives as offered by the Galaxy; e.g. with a HTC snap everything is fine.
So the question is: Does the Hero offer one drive only when connected in the USB mode?
Thanks for your help!
hi
i got a touch dual right here. I got it for like 1,5 year now. But the last months the phone wont connect to a computer/laptop or anything!
i tried several computers, windows xp/vista/7 installing the mobile application of windows and activesync. Also i tried a softreset and couple of hardware resets.. it still doenst work. The phone has energy from the usb connection, but the computers dont do anything...
anybody can help? or is just my usb connection on my phone broken? only the charge option does work?
greets!
nobody?
It ever happened on my nike. Try to use another usb cable and connect your device to another PC with activesync installed
i got the same problem i was going to make a post but saw this one after installing niki wwe this started to happen i cant connect to active sync no more it does not even say if a usb is connected but charges while connected can some 1 help us please i want to install normal windows instead of cooked room but cant do it if its like this
well after half a year not being able too connect my phone connects again!
very weird, i didnt change anything, not even te cable and computer...
i installed wm 6.5 cleanblack now
Goodday!
i got the following problem,
When i am trying to connect my hd2 with my computer it all works fine. But when i want to sync my phone trough active sync, it doesn't see my HD2. I can send packages like pictures or movies to my phone trough this bluetooth connection but i really want to update my HD2.
My phone doenst connect with usb anymore so thats why im trying to store an bluetooth connection. (I am using windows XP.)
If you guys could help me out i would be verry pleased, thnx instead!
Download and install Windows Mobile Device Centre, everything should work fine afterwards!
i thought that windows device center isn't working for windows xp users?
you want to update your HD2 using bluetooth because usb cable is no longer working?
Simply, Bluetooth is not a replacement for the USB cable. You can't apply ROM updates through Bluetooth, you have to fix the USB