Related
This is for Samsung Omnia 7 if you have used the Diag app/code to mess about with the settings. I had screwed my rotation by changing some settings. Tried a reset via code but that didn't work. In the end I used code *#2580# to enter integrity control and ensured it was at '1' (on), then use code *#0*# to enter LCD test, lay the phone flat and press the 'CAL' button. It returned 'true' and now my accelerometer works again.
Hope this is actually a fix and it helps someone out. I have noticed a few people lost the rotation on their Omnia 7's. This will probably work for Samsung Focus too. If this does fix your problem let us all know so this can help others too.
Yep - that CAL is calibrate, I imagine. You can also do it with the "Level" application from Microsoft (spirit level thing) if you don't fancy the diag codes.
Diagnostics / Accelerometer (+ fix)
Yes, if you play around in the diagnostics - BE CAREFUL!
To enter diagnostics on your Samsung (confirmed for Omnia 7) enter ##634# and press "call"
Then type the following for the following services:
*#0*# Various diagnostic settings incl accelerometer, compass, screen colour
*#2*# Detailed battery info (incl. charge to nearest 1%)
*#3*# Screen brightness
Be carefull if you choose to calebrate the accelerometer as it will muck up your auto rotation if the phone is incorrectly positioned.
To reset the rotation do the following:
- Ensure the yellow flowers picture is upright (aligned with the flowers towards the top of the phone)
- Lay the phone down on a true horizontal flat surface (XYZ values do not matter for this) ensuring the flowers remain upright
- Touch the "Cal" button. If you get "True Return" you have reset. If "false", try again in slightly different positions until it works.
wt7881 said:
Yes, if you play around in the diagnostics - BE CAREFUL!
To enter diagnostics on your Samsung (confirmed for Omnia 7) enter ##634# and press "call"
Then type the following for the following services:
*#0*# Various diagnostic settings incl accelerometer, compass, screen colour
*#2*# Detailed battery info (incl. charge to nearest 1%)
*#3*# Screen brightness
Be carefull if you choose to calebrate the accelerometer as it will muck up your auto rotation if the phone is incorrectly positioned.
To reset the rotation do the following:
- Ensure the yellow flowers picture is upright (aligned with the flowers towards the top of the phone)
- Lay the phone down on a true horizontal flat surface (XYZ values do not matter for this) ensuring the flowers remain upright
- Touch the "Cal" button. If you get "True Return" you have reset. If "false", try again in slightly different positions until it works.
Click to expand...
Click to collapse
Thank you !
I am currently experience another issue since I launched that app.
The start button doesn't turn on the display anymore,
maybe I'm getting crazy but I think holding that button was indeed turning the display on.
Actually I did miss my calibration but thanks to your help, I fixed,
do you think the Start button issue could be related to that tool as well ?
Thank you
Would this solve the slow auto rotation of the UI?
I had the HD7 and the auto rotation on the Omnia seems to damn slower and less responive than it was on the HD7
aybe0 said:
Thank you !
I am currently experience another issue since I launched that app.
The start button doesn't turn on the display anymore,
maybe I'm getting crazy but I think holding that button was indeed turning the display on.
Actually I did miss my calibration but thanks to your help, I fixed,
do you think the Start button issue could be related to that tool as well ?
Thank you
Click to expand...
Click to collapse
I have the exact same problem for a few days now, don't remember what could have been the setting for it.
Start button doesn't turn on the display anymore. I want that back! How can I get the start button to default?
Thx.
I have just reset my phone to factory defaults : Parameters, About, Reset ...
Notice that resetting will erase everything, I've lost my IE favorites by the way ...
Everything is back, Start button as well ...
In fact I did play too much with the settings, it was turning the screen off
as soon as I was making a call, the only way to turn it back on was the called one to end the call ...
Tried to fix (lol) proximity and lights settings but nothing ...
I think I'll just leave the Diagnostics app. for now, too dangerous
there seems to be an option to do that as well from the app.
But will it erase your data ? I don't know ...
aybe0 said:
I have just reset my phone to factory defaults : Parameters, About, Reset ...
Notice that resetting will erase everything, I've lost my IE favorites by the way ...
Everything is back, Start button as well ...
In fact I did play too much with the settings, it was turning the screen off
as soon as I was making a call, the only way to turn it back on was the called one to end the call ...
Tried to fix (lol) proximity and lights settings but nothing ...
I think I'll just leave the Diagnostics app. for now, too dangerous
there seems to be an option to do that as well from the app.
But will it erase your data ? I don't know ...
Click to expand...
Click to collapse
My proximity sensor went crazy too. The fix is to go to diagnostics mode (google for it) and register a bit larger proximity value as a default. I used my hand to block the sensor. On my phone the absolute minimum seemed to be 3, which made the phone unusable. Something in the range of 10-20 seemed to be the most useful compromise. You may need to experiment a bit to get a suitable value. This way you don't have to reset the entire phone.
I still wonder what the default proximity value is... if anyone knows, please reply.
I have Samsung Focus 1.3 Mango 7720, but i don't see "cal" in the settings of the Proximity?
can you help?
Thanks
This has been happening pre and post Nodo on my focus. If i'm on a phone call for at least a few minutes, then pull the phone away from my head, the phone's display should become active, but it isn't.
Anyone else having this issue or is it time to exchange the phone?
I have the same issue also it seems like I have to press the power button a couple of times to get it back.
Sent from my SGH-i917 using XDA Windows Phone 7 App
I'm also having this issue. Anyone remember if ther were having it pre-Nodo? Just wondering if the update changed something.
Regardless, it's a bit of a PITA.
I experienced this after having to replace a cracked screen. I just recalibrated the proximity sensor with my finger about an inch away and it worked fine.
ArcWhistler said:
I experienced this after having to replace a cracked screen. I just recalibrated the proximity sensor with my finger about an inch away and it worked fine.
Click to expand...
Click to collapse
How did you do that?
Yeah, ditto that - how do recalibrate the sensor?
Samsung Diagnostic App.
http://forum.xda-developers.com/showthread.php?t=839154
I was pecking around the screens months ago, and there was one bank of tests (multi-touch, red, green, blue, white, battery, etc, etc) that allowed setting and viewing the proximity sensor.
I remember playing with moving my hand closer, and further and watching it change from sensed to clear.
Sorry, can't remember which codes now.
I used the Wiki:
http://forum.xda-developers.com/wiki/index.php?title=Samsung_Focus
LCD Test - *#0*#
Ok, mine says No Detection. Is there anyway to set the value?
One other thing to note, about the samsung focus specific update regarding disabling the touch sensitive buttons while in a program, that also isn't working for me either. Not sure if they are related, but thought I'd throw it out there.
And as far as calibrating goes, not sure it would help since the problem only occurs while I'm on a longer phone call. On short ones the proximity sensor works just fine.
If you move your finger closer to the sensor, it should eventually change to Detected. The "set" button at the bottom should set the proximity sensor to the new distance. Mine is around 75.
ArcWhistler said:
If you move your finger closer to the sensor, it should eventually change to Detected. The "set" button at the bottom should set the proximity sensor to the new distance. Mine is around 75.
Click to expand...
Click to collapse
Mine says No Dectection. It has Prox Sensor: XXX I've taken my entire hand and covered my phone. NOTHING. When I push SET, It says ProxThreshold :0. Is there anyway to set it manually?
samsung focus post nodo
I believe the prox sensor issue is happening post nodo, I have never had this problem prior to the update... I have been able to fix it temporarily by pulling the battery and starting it up... don't know how long the fix works... got to do some testing... I am wondering if its a power thing as the screen wouldnt work when you plugged it in to power and had on a soft surface....
Still nothing. I didn't want to hard reset since I have Chevron installed. For some reason I did four updates on my phone and don't have a single backup. If I hard reset I'm S.O.L. with Twin Blades and other homebrew apps
What value does it show when you press the Reg button?
I've had issues with my earring tapping the screen while I talk and I had it fixed before NoDo, but the values reset when it was installed, they also appear to be different values now as my screen got supper finicky after the update. I was constantly hanging up or scrolling through multiple pages of stuff with my ear and you could see the screen turning on and off. I ran the proximity calibration while holding my hand in front and set to it to 1.
If it shows xx have you tried setting the value with nothing in front of the phone to see if it will at least zero out?
BooR4dley said:
What value does it show when you press the Reg button?
I've had issues with my earring tapping the screen while I talk and I had it fixed before NoDo, but the values reset when it was installed, they also appear to be different values now as my screen got supper finicky after the update. I was constantly hanging up or scrolling through multiple pages of stuff with my ear and you could see the screen turning on and off. I ran the proximity calibration while holding my hand in front and set to it to 1.
If it shows xx have you tried setting the value with nothing in front of the phone to see if it will at least zero out?
Click to expand...
Click to collapse
It has a big red box. It says No Detection. Prox Sensor:XXX Do I press Set or Reg?
another thing is wrong
seems like my light sensor is fried as well... I am starting to wonder if it's because of bad placement of the usb port... both lay right in front of the port, can't imagine pluging in and unpluging the phone would help if the sensors are right in front. I can't get either sensors to work anymore, even with a battery pull... does anyone else have this issue? goto the diagnosis menu and type
*#05#
you should be able to run through all the tests, I skip the feedback loop... Start at 1 and work your way through.
My Prox sensor says, no sensor XXX, and my light sensor is stuck with a value and will not change even when I cover the sensor... looks like a warranty replacement... how does this work with a sd card installed, the official WP7 ATT certified 8GB? Anyone else have to do this?
rockclimbaudiextreme said:
seems like my light sensor is fried as well... I am starting to wonder if it's because of bad placement of the usb port... both lay right in front of the port, can't imagine pluging in and unpluging the phone would help if the sensors are right in front. I can't get either sensors to work anymore, even with a battery pull... does anyone else have this issue? goto the diagnosis menu and type
*#05#
you should be able to run through all the tests, I skip the feedback loop... Start at 1 and work your way through.
My Prox sensor says, no sensor XXX, and my light sensor is stuck with a value and will not change even when I cover the sensor... looks like a warranty replacement... how does this work with a sd card installed, the official WP7 ATT certified 8GB? Anyone else have to do this?
Click to expand...
Click to collapse
same problem here. seems like those two sensors are burned
For the last 2 or 3 months I've noticed my proximity and light sensor don't work on my Focus 1.3.
The screen doesn't turn off while on a call and the camera button can wake the phone with the screen turned off.
I've also seen that the screen doesn't auto dim any longer when in a dark room.
I held off on doing the warranty swap with ATT because I thought Mango might fix it but I haven't had any luck.
Do you have any suggestions?
When you mean the camera button wakes the phone up, does it launch the camera app, or is it like the power button is pressed (when the screen is off)?
Archange1 said:
When you mean the camera button wakes the phone up, does it launch the camera app, or is it like the power button is pressed (when the screen is off)?
Click to expand...
Click to collapse
That I have seen was a setting I had in the camera settings but the rest I've seen still stands.
Diagnosis app
So basically you need to recalibrate your proximity and light sensors with the diagnosis app. Please read the sticky thread for diagnostic codes. This issues has been discussed. Off the top of my head I can't remember the codes how to do it. I would search the forum for proximity sensor and light sensor recalibration.
Update-
1. If you don't have the diagnosis app you need to type ##634# in your dial pad
2. type *#0*# - diagnosis app not the dial pad
3. Recalibrate the Light and the proximity, then restart your phone. Should be fixed.
As for holding the camera button and the screen lights up. That is an advantage/shortcut to get to picture mode. That setting can be disabled if you go
1. Windows home live tile screen
2. settings
3. Swipe over to applications
4. pictures + camera
5. disable press and hold camera to wake up the phone or enable prevent accidental camera lauch when phone is locked
siralex241 said:
So basically you need to recalibrate your proximity and light sensors with the diagnosis app. Please read the sticky thread for diagnostic codes. This issues has been discussed. Off the top of my head I can't remember the codes how to do it. I would search the forum for proximity sensor and light sensor recalibration.
Update-
1. If you don't have the diagnosis app you need to type ##634# in your dial pad
2. type *#0*# - diagnosis app not the dial pad
3. Recalibrate the Light and the proximity, then restart your phone. Should be fixed.
As for holding the camera button and the screen lights up. That is an advantage/shortcut to get to picture mode. That setting can be disabled if you go
1. Windows home live tile screen
2. settings
3. Swipe over to applications
4. pictures + camera
5. disable press and hold camera to wake up the phone or enable prevent accidental camera lauch when phone is locked
Click to expand...
Click to collapse
So this should work for both?!
This makes me very happy! I'll report back soon.
Huh when I get into the Proximity recal it only shows XXX (No Detection) and never changes anything.
Am I doing it wrong?
EDIT: The value reported for light is staying at 0000 too.
http://forum.xda-developers.com/showthread.php?t=1045167&highlight=proximity
Is hinting that I have a busted set of sensors and will need to warranty it.
play with the set and reg button. Also, restart the phone to see if it will work. Not to insult your intelligence but you know where the proximity and light sensor are right? Hold your finger in front of it on it moving it further and closer. If none of these work you might have defective sensors. I like to try everything a couple of time before I take it in for warranty.
I do know where the sensor is, right next to the earpiece.
I've restarted the device and tried the sensors again but no luck.
When I try to set the light value at something I get some error about "Light_SetCalValue : DeviceloControl failed" and for the proximity test the screen always stays red even if I cover the whole phone with my hand.
I'm in the same boat. I've been debating on just rolling all the way back to stock and starting all over. Of course if it is a hardware issue I'm just going to be wasting time. Then again it probably would be best to roll back before sending it in on a warranty issue...
My other concern is if they do cover it what am I going to get back? Don't really want to be stuck on a Rev 1.4 focus as that STILL seems to be causing issues.
I hear ya tanders04, it would stink to get a 1.4 back.
Also, thank you siralex241 for the help.
Hello fancies!
I'm having some problems with the proximity sensor of my Omnia 7. Basically the values from the proximity sensors are a little bit off the usual and the screen just goes black when answering a phone call ( so I can't hang up anymore, for example ).
I tried the diagnosis menu and the LCD test screen. There I can see the proximity values and understand why the phone is behaving this way, but there is no "SET" button as a lot of guides on the internet say.
My guess is that that button is gone with the update to Mango. Anyone can confirm me that and give me an alternative diagnosis screen where to change the value?
The screen I'm refering to is: *#0*# from the diagnosis screen.
thanks a lot!
up... any ideas?
drowne said:
up... any ideas?
Click to expand...
Click to collapse
maybe a dumb question- have you a new screenprotector, with covered
Proximity Sensor
the sensor is in the up-right corner
so maybe holding it with right hand you cover it and screen goes blank
happens to me...
it's not what I asked.
I know where the proximity sensor is and how it behaves, but when I replaced the screen something went wrong and the default low threshold is too low to work properly right now, so I have to set another value.
This was possible on WP7, but apparently it's not in mango. Do you have any idea where I can find that setting on mango?
has anyone got an answer to his question?
it seems that there isn't the set function in the diagnosis mode with mango anymore ..
me too have same problem.i just change my lcd screen after it happen when i make call screen is going black andi can't do anything no any button is not working.
there is any way to set promixty sensor on mango ?
or any app for this ?
flash a pre-mango ROM and change the value in the diagnosis app, I'm not sure if it will stick when you update, but it is certainly worth a try.
You can try reinstalling diagnosis app if you haven't yet. Maybe it works.
Hi,
I've got a problem with the accelerometer of my nexus 10, when I'm in automatic rotation mode the devise doesn't rotate automatiquely when I rotate it. And when an application force the portrait mode I have to desactivate the automatic rotation mode to go back in landscape mode.
Thanks in advance
Cyril
I believe GPS Status & Toolbox can re-calibrate the accelerometer (along with Compass, and get AGPS data), might be worth looking into
Fixed my screen orientation problem.
I spent a good four hours or so trying to figure out why my screen orientation wasn't working properly even after a reboot and boot into safe mode. I could only get one portrait with buttons on bottom and had to rotate an extra 30 degrees or less than 1 degree to cause it to flip between landscape orientations. Loaded up Google Skymaps and the Horizon was off by about 30 degrees in landscape, but fine in portrait. First went and downloaded Android Sensor Box and found the X-axis would run up to +15.5 and only -3.7. Anyways the calibration reset in GPS Status & Tool Box 4.0.1 fixed it immediately.
Awesome call on that program espionage724 would have never found it if I didn't find this thread and your post.
Edit it came back although a combination of running the program and hitting the lock button seemed to fix it. This time the axis offset was reversed though. Probably an operating system bug and only seemed to come back after I attached an OTG USB cable so =/ ?
Same problem here
I have the same problem with a new Nexus 10. The rotation did not work in any application at any time. With the Sensor Toolbox, I see that the sensor is working to some extend. Recalibrating with the GPS Status did not change anything.
Is this a hardware defect, so that I should send mine back to Google?
If you happen to get the orientation working, I'd be happy if you share it with me.