First off, thank you all, especially the developers for all the help you're providing and your hard work.
Now, I am a newbie with Android. I've managed to get a running start and flash Blackberries and WM phones in the past...
But it seems like Android is a little bit over my reach... Been reading for 2 days, flashing, installing sbf's and noting pleases me.
My phone is a used Defy, bought with CM9 installed and the camera not working. The previous owner installed the SBF on the defy, and it stopped working as it's said many times. It was a 4.0.4 android version installed, but I was hoping to install the CM10 jelly bean. Bricked it a few times, but managed to reinstall this SBF: DEFYPLUS_U3_4.5.1-134_DFP-231_CEE_ROOTED_No_Signed.sbf
Now my Defy is running the stock android version with motoblurr, but the camera still doesn't work, as you expected.
Now, all I want is: If I still can't use the camera(the previous owner said my defy has green lens, no way to know for sure), at least it could do is run Jelly bean version, and if it's possible overclocked and with ICS(or how's that hardware acceleration patch called?).
If anybody has time to walk me through it, I will be more than grateful.
Stuff from about phone that might help:
System version: 45.0.2310.MB526.NonEFIGSRetail.en.EU
Model number: MB526
Android version: 2.3.6
Baseband version: EPU_U_00.60.03
Kernel version: 2.6.32.9-ge281b6e
[email protected] #1
Built number: 4.5.1-134_DFP-231
Hi,
first of all:
the model number mb526 is for the defy+. The Defy got the number mb525.
is the phone rooted? and when, is the cwm (clockworkmod) installed?
when your phone boots up, does the led lights blue?
Sent from my GT-P7500 using XDA Premium HD app
Hello, and thanks for the fast reply.
It is rooted, and I know it's defy mb525.
I had installed sndinit2.3. The led then turned blue. I flashed it afterwards with rds lite and now I dont think I have any recovery mod installed.
As I know, defy+ models only have red lense camera Moduls.
so you flashed a defy+ sbf on a green lens defy. that's why camera doesn't work.
But no problem.
The best way is to download a froyo sbf for the defy at
http://forum.xda-developers.com/showthread.php?t=966537
the Nordic is good for installing custom rooms.
flash the sbf via rdslite.
After that, root the phone, install 2nd init and then you can easily install custom rooms.
Sent from my GT-P7500 using XDA Premium HD app
Well, he flashed his Defy with a Defy+ SBF. So the model number shown in the 'About' option will be MB526 and not MB525. AFAIK, there is no way to make the camera work now.
And he cannot flash froyo SBF as the Defy is flashed with SBF having BL7 and cannot be downgraded.
Sorry, I forgot that a downgrade doesn't work.
In that case, you have to use the custom Roms for the defy+
a good start is, to download a cm7 build defy-cm.net
boot your phone and when the led turnes blue, pressing the volume down key.
you should get into the recovery menu. I wipe data/cache and the install zip from sd (before you have to copy the
downloaded rom on the sd of your phone).
After cm7 is running, go on and download the latest jb rom of quarx. install the same way as cm7.
that's it.
Sent from my GT-P7500 using XDA Premium HD app
marco.michel said:
Sorry, I forgot that a downgrade doesn't work.
In that case, you have to use the custom Roms for the defy+
a good start is, to download a cm7 build defy-cm.net
boot your phone and when the led turnes blue, pressing the volume down key.
you should get into the recovery menu. I wipe data/cache and the install zip from sd (before you have to copy the
downloaded rom on the sd of your phone).
After cm7 is running, go on and download the latest jb rom of quarx. install the same way as cm7.
that's it.
Sent from my GT-P7500 using XDA Premium HD app
Click to expand...
Click to collapse
Well, I kinda did that, but... after I flashed the CM10 jb, the phone starts (the sound of new drive connected in windows led me to believe that), but noting comes up on the defy's screen... restarted...but nothing...
So then I flashed back to the SBF previously mentioned...
Donno if there is a difference between sndinit and CMW...
Should I try it with CMW?
paulielciu said:
Well, I kinda did that, but... after I flashed the CM10 jb, the phone starts (the sound of new drive connected in windows led me to believe that), but noting comes up on the defy's screen... restarted...but nothing...
So then I flashed back to the SBF previously mentioned...
Donno if there is a difference between sndinit and CMW...
Should I try it with CMW?
Click to expand...
Click to collapse
I guess you flashed a ROM intended for Defy (for Froyo kernel, and yours is GB kernel). Try flashing CM10 ROM for Defy+.
andr0idfreak said:
I guess you flashed a ROM intended for Defy (for Froyo kernel, and yours is GB kernel). Try flashing CM10 ROM for Defy+.
Click to expand...
Click to collapse
+1
One the one side, your hardware is a mb525 - defy but on the other side you're firmware an bootloader is a mb526 - defy+.
so you can only use roms for a defy+ - using a rom for the defy causes the error you got.
Sent from my GT-P7500 using XDA Premium HD app
andr0idfreak said:
I guess you flashed a ROM intended for Defy (for Froyo kernel, and yours is GB kernel). Try flashing CM10 ROM for Defy+.
Click to expand...
Click to collapse
The CM7 that's needed to install CM10 should be also for defy+?
Also, don't I have to follow the steps for defy +? Meaning flashing CM9, and then CM10 JB?
Yes, you can flash CM ROMs for Defy+ only, with battery fix as the battery is 1500mah which defy+ has 1700mah.
andr0idfreak said:
Yes, you can flash CM ROMs for Defy+ only, with battery fix as the battery is 1500mah which defy+ has 1700mah.
Click to expand...
Click to collapse
Last question... Should I use CMW or sndinit 2.3? If CMW is the way to go, how do I uninstall the sndinit 2.3 recovery mod or how's it called?
You will have to install 2ndinit to get CWM.
paulielciu said:
The CM7 that's needed to install CM10 should be also for defy+?
Also, don't I have to follow the steps for defy +? Meaning flashing CM9, and then CM10 JB?
Click to expand...
Click to collapse
yes, the CM7 should be also for defy+.
The steps for flashing are the same. But as you have a defy+ now, you need some extra tweaks like battery patch and maybe camera patch. Some of them are included in the actual roms. battery patch is needed because of the different types of battery between defy and defy+.
Sent from my GT-P7500 using XDA Premium HD app
Thank you guys. I managed to update my Defy to 4.1.1 JB. At least it's running the latest version of android.
Now I'll try to overclock it... Hope I don't brick it...
paulielciu said:
Thank you guys. I managed to update my Defy to 4.1.1 JB. At least it's running the latest version of android.
Now I'll try to overclock it... Hope I don't brick it...
Click to expand...
Click to collapse
Its already overclocked to 1Ghz
Sent from my MB525 using xda app-developers app
ppero196 said:
Its already overclocked to 1Ghz
Sent from my MB525 using xda app-developers app
Click to expand...
Click to collapse
Yeah, but I tweaked a little bit the voltage, as my battery is a little bit dry...
paulielciu said:
Yeah, but I tweaked a little bit the voltage, as my battery is a little bit dry...
Click to expand...
Click to collapse
For vsels there is this app
http://forum.xda-developers.com/showthread.php?t=1815142
Sent from my MB525 using xda app-developers app
Back again here.
Question as usual.
Is there any chance I can downgrade if I take my defy to a service? Can they do it with some cool toys?
Just reflash your stock SBF using RSDLite and it will be back to how it was when you bought it.
Related
hi can anyone help,
i bought a defy sometime ago and the person who sold it flashed the 2.3.4 stock rom from here.
http://forum.xda-developers.com/showthread.php?t=1127085
so of corse the defy is green lense so there for camera doesnt work.
is there anyway that i can 1: get camera to work and/or 2: downgrade
ive searched and only found some chinese rom but it has dead links and im a little rusty with nandroid backups etc
can someone guied me
p.s im on cm7.1 if that make any diffrance
thanks folks.
I think 2.3.4 can be downgradable to froyo, am i not right?
I have a green lens defy with stock 2.2 froyo, and for cm7, cm9 and miui, the camera works, so I guess that who sold it to you have it upgraded, don't know why, :S
try flashing froyo, then flash cm7 over it
I'm not sure if will work, but why don't give it a shot
tell me if it worked
Good Luck
No he done full gb 2.3.4 and it says its not downgradeable. I've tryed to flash other sbf's but none work.
Thanks for reply mate.
Sent from my MB525 using xda premium
jonezy8873 said:
No he done full gb 2.3.4 and it says its not downgradeable. I've tryed to flash other sbf's but none work.
Click to expand...
Click to collapse
it was true back then that it wasn't downgradable. but lucky you the situation has changed. you can now downgrade your phone and install custom roms. there are 2 methods available since your rom is only on cg or bl 5:
1) read the first post of this thread completely as all newbies should:
http://forum.xda-developers.com/showthread.php?t=1216982
and in there under common problems/questions you'll find your first solution. this method would preserve your phone to bl5 but it's a bit longer than method 2.
2) method 2 will upgrade your phone to bl6 but it's much easier. so if you don't have any problem with that, use this method:
http://forum.xda-developers.com/showthread.php?t=1486731&highlight=bl6
That's great thanks.
Just what I was looking for
Is this the same method
http://forum.xda-developers.com/showpost.php?p=15341774&postcount=8
Sent from my MB525 using xda premium
jonezy8873 said:
Is this the same method
http://forum.xda-developers.com/showpost.php?p=15341774&postcount=8
Sent from my MB525 using xda premium
Click to expand...
Click to collapse
yes. that is method 1.
balls..... i cant get anything to work
dead links....
cant understand what there on about.....
grrrrrrrrr
jh20 said:
yes. that is method 1.
Click to expand...
Click to collapse
its got dead links and when i try to flash the first rom it stops and says fail
jonezy8873 said:
hi can anyone help,
i bought a defy sometime ago and the person who sold it flashed the 2.3.4 stock rom from here.
http://forum.xda-developers.com/showthread.php?t=1127085
so of corse the defy is green lense so there for camera doesnt work.
is there anyway that i can 1: get camera to work and/or 2: downgrade
Click to expand...
Click to collapse
Try flashing the full SBF from here - I know the link works because I downloaded it myself a couple of hours ago. It's also rootable using the Droid 3 easy rooting tool linked in that thread. It says in the thread that the green lens camera can be got to work using Greenbreadmod.
If that SBF + Greenbreadmod gets your phone working again then I'd try MS2Ginger or CM7 on it (if CM7 will support the green lens camera, not sure). Take a nandroid backup first - install 2ndInitDefy to get CWM on the phone. MS2Ginger is based on Gingerbread but with some nice enhancements eg 1% battery step, power menu, 720p playback, panorama mode etc. I had the 2.1 version of MS2Ginger on my green-lensed Defy for many months and it was rock solid. I've not tried CM7 but lots of people like it.
ok im downloading it now
so just flash this with rsdlite is that correct.
i have downloaded greenbread 1.1 what do i do with that? do i unzip it on pc or move whole file to clockworkmod backup?
jonezy8873 said:
i have downloaded greenbread 1.1 what do i do with that? do i unzip it on pc or move whole file to clockworkmod backup?
Click to expand...
Click to collapse
From the Greenbreadmod thread:
Installation:
Install official GingerBread via nandroid + fixed sbf
Install 2nd-init recovery 0.6.1 or later
Install zip from recovery
RTFM
lol i have no idea what any of that means RTFM? haha
im new at all this
i cant flash that rom anyway it gets to creating img or something like that then says executing then says fail???
ive got all moto drivers installed and running as administrator?
just want a stock rom that camera works.
fed up of cm7 keeps crashing.
tries all the others to like miuiandroid and some others.
starting to miss my iphone :-/
jonezy8873 said:
i cant flash that rom anyway it gets to creating img or something like that then says executing then says fail
Click to expand...
Click to collapse
What version of RSD Lite are you using?
5.2 I think
Sent from my MB525 using xda premium
I used 5.6 to flash that sbf on my phone. Google around, you'll find it online.
Ok I will have a look in a while
Cheers pal
Sent from my MB525 using xda premium
not even 5.6 works. it gets so far says fail reboots my phone? f**kin mad. ive flashed my old defy like 20 times before and allways worked.
http://forum.xda-developers.com/showthread.php?t=1140839, by walter79, ur cam will work i and i used this rom its 100% work on my red lense defy plus
1) Is your phone actually working at the moment ie can you power it up and get to the home screen?
2) When flashing, do you power it up in to the bootloader? This involves holding vol+ as you press and release the power button.
I'm just wondering whether you might have too little battery to flash. The phone doesn't charge the battery in bootloader mode so repeated flashing can flatten the battery. I believe that bootloader mode will display something like "Battery low - cannot program" if that is the case. Possible fixes are: (1) The McGyver hack, (2) charge the battery in a cheap external charger eg like this one.
veeranna said:
http://forum.xda-developers.com/showthread.php?t=1140839, by walter79, ur cam will work i and i used this rom its 100% work on my red lense defy plus
Click to expand...
Click to collapse
I've got green lense mate that what the problem is. I have the 2.3.4 gingerbread rom that camera (green) soesnt work.
Sent from my MB525 using xda premium
Hi there,
After installing CM 7.1 i wanted to go back to my stock firmware
so i flashed the SBF : DEFYPLUS_U3_4.5.1-134_DFP-231_BLUR_SIGN_USADEFYEMARAB1B8RTDE004.0R_PDS03C_USAJRDNGIBRRTDACH_P019_A022_M002_Service1FF.sbf
with RDLite.
After this i wanted to ROOT my defy with Super1click.. it always worked...
until now
I bought my DEFY+ in the Netherlands unlocked..
It seemes the SBF isn't the same as I bought. To unlock i need to Swipe
that wasn't on the original one...
So what SBF do i need then ?
Or am I ****ed after flashing my Defy ?
Is that some of the latest 2.3.6 sbf's? They aren't rootable as of yet :-/
You aren't fu*ked But, maybe you are stuck If it is one of the latest 2.3.6, then it's version 7 signed, too. That means you can't flash anything older now. I think I have seen some version 7 signed Froyo, but not sure if it was tested... I do use the version 6 Froyo, though, on my DEFY+...
So, rooting isnt possible too ?
Rooting is not possibly yet..
Sent from my MB526 using xda premium
robster47 said:
So, rooting isnt possible too ?
Click to expand...
Click to collapse
Try Unlockroot
cretu22 said:
Try Unlockroot
Click to expand...
Click to collapse
Doesn't work either :*(
Try DoomLord v4 for rooting, it's ok with 4.5.1-134_DFP-139
It wont work mate your stuffed
Sent from my MB525 using xda premium
niksy+ said:
Is that some of the latest 2.3.6 sbf's? They aren't rootable as of yet :-/
You aren't fu*ked But, maybe you are stuck If it is one of the latest 2.3.6, then it's version 7 signed, too. That means you can't flash anything older now. I think I have seen some version 7 signed Froyo, but not sure if it was tested... I do use the version 6 Froyo, though, on my DEFY+...
Click to expand...
Click to collapse
Agreed
Sent from my MB525 using xda premium
DoomLord v4 doesn't work vor CG7.
But about the Version 7 Froyo, should that be rootable just because its 2.2?
Can anybody confirm that?
Unfortunately there isn't any working tool atm and latest Froyo isn't on BL7 but BL6 so we're stuck with stock firmware. I hope not too long.
Defy Plus 4.5.1-134 DFP-231 CEE
@ Chamelleon
You flashed the same ROM.
I got error messages all the time, think its the motorola message service or so.
The phone software isn;t working smoothly like the original one ?
my defy was flashed with defy+ sbf with kernel version 2.6.32.9-ge281b6e. i hate it cause my battery wont work i need to use desktop charger since battery cant be recognize by the phone and the status is "?". also camera is not working.
i tried to flashed it with different sbf's found in this forum but none of it work! after flash phone wont boot unlike when you flash it with my current firmware.
i want at least to have my battery back to normal also camera if possible. i tried flashing it with other defy rom but i always got stuck. it seems that ICS was installed but the phone wont load it.
is there anyway to get back to my original firmware? or any upgrades that can fix this. please help.
Reply!
Hey there!
Before you do anything, you gotta root your phone. Then install 2ndint to get recovery mode menu. Only from there can you successfully flash roms and get it to work.
i have the same prob.
i can flash any rom for defy+
my phone is defy green.
i flash dfp 4.5.1-231 (bootloader 7)
my battery and camra not work.
any solution ?
Help
The bootloader is locked !!!
Hi ...
Is almost impossible to downgrade from 2.3.6 to 2.2.
Motorola Defy with green lens work just with 2.2. With "update" the camera will NOT work more and until now is not possible to downgrade !!!
All this, because Motorola don't want to unlock the bootloaders. I personally I have this problem and now am nervous on Motorola...
Most of HTC's and Samsung's have unlocked bootloaders. In this conditions, I wil not buy more Motorola.
gorillaz07 said:
my defy was flashed with defy+ sbf with kernel version 2.6.32.9-ge281b6e. i hate it cause my battery wont work i need to use desktop charger since battery cant be recognize by the phone and the status is "?". also camera is not working.
<snipped>
is there anyway to get back to my original firmware? or any upgrades that can fix this. please help.
Click to expand...
Click to collapse
If you want any help, we need to know your build number (not kernel). We can then find out what bootloader version you have (6 or 7). If you are on bootloader6 you can downgrade to froyo with a workaround, but on bootloader7, you're stuck.
Sent from my MB526 using Tapatalk 2
im on bootloader 9 i think
Root then install a rom..it's gonna work fine
Sent from my MB526 using Tapatalk 2
gorillaz07 said:
im on bootloader 9 i think
Click to expand...
Click to collapse
You're not on bootloader 9.10. That's not what we're talking about. If you find your build number under system settings -> about phone, we'll try to find out what firmware you flashed to find out what "e-fuse level" you're on. Or just give us a link to the sbf you have flashed.
pjgowtham said:
Root then install a rom..it's gonna work fine
Sent from my MB526 using Tapatalk 2
Click to expand...
Click to collapse
No, we're talking about kernels here. If he is a green lens user on 2.3.6 kernel his camera will not work. He needs to downgrade to froyo. This is only possible on bl6. He can't flash a froyo kernel over bl6 or bl7 without flashing a special sbf.
Ya we can't downgrade..it's not possible..but that special sbf s not there too..an i rite?
Sent from my MB526 using Tapatalk 2
i flash dfp 4.5.1-231 on green lens (bootloader 7)
my battery and camra not work.
any sbf for downgrade to froyo ?
jalal-jap said:
i flash dfp 4.5.1-231 on green lens (bootloader 7)
my battery and camra not work.
any sbf for downgrade to froyo ?
Click to expand...
Click to collapse
Nope, sorry. No going back from there
theres rooting for bl7s i think...so the only solution would be using custom roms
Sent from my MB526 using Tapatalk 2
He can root, he can flash custom ROM's, but the only kernel he can use is the GB kernel, so camera won't work (he has green-lensed camera) and if he tries to flash a Froyo kernel, he will end up with a BL error.
Oh..i didn't know that...thanks auris...that's because I'm safe on Froyo and i haven't tried bl7 in practical..
Sent from my MB526 using Tapatalk 2
I just will my battery back and charge.
yes im on bootloader 9.10 no hopes then to downgrade?
gorillaz07 said:
yes im on bootloader 9.10 no hopes then to downgrade?
Click to expand...
Click to collapse
Bootloader 9.10 is not the same as the bootloader version, my friend (yes, it is confusing). If you de-pack an sbf , you'll find a lot of images for different partitions of your phone. The images are all called CG__.smg where __ is a number, e.g. CG31.smg or CG39.smg. Most of these images are signed by motorola with a special version number (e.g. 6 or 7 on defy+ roms).
Our TI Omap processor has an e-fuse built into it which is some sort of a flash counter. It doesn't count how many times you flash, but the level of the CG__.smg you have flashed onto your device. If you flash an sbf with a CG31 (the bootloader) on version 7, you'll never be able to flash a CG31 lower than 7. Motorola increases this number for every update they make, to ensure that a user always uses the latest motorola software. This means it is impossible for let's say a defy+ user on 2.3.6 to downgrade to 2.3.5.
everybody has bootloader 9.10 (EDIT: Most do, but I've seen 90.73 and some others as well), but it has been re-signed and made only to accept the newest kernels, so your green lens is stuck without camera. Only the latest Motorola sbfs are bootloader7 (as of june 2012)
yeah i figure that our cause in flashing you will see codes and code 39 takes time i guess we cant help but wait, thanks guys if theres any solution pop out hope someone will keep us up to date. thanks!!!
fiskenigaten said:
Bootloader 9.10 is not the same as the bootloader version, my friend (yes, it is confusing). If you de-pack an sbf , you'll find a lot of images for different partitions of your phone. The images are all called CG__.smg where __ is a number, e.g. CG31.smg or CG39.smg. Most of these images are signed by motorola with a special version number (e.g. 6 or 7 on defy+ roms).
Our TI Omap processor has an e-fuse built into it which is some sort of a flash counter. It doesn't count how many times you flash, but the level of the CG__.smg you have flashed onto your device. If you flash an sbf with a CG31 (the bootloader) on version 7, you'll never be able to flash a CG31 lower than 7. Motorola increases this number for every update they make, to ensure that a user always uses the latest motorola software. This means it is impossible for let's say a defy+ user on 2.3.6 to downgrade to 2.3.5.
everybody has bootloader 9.10 (EDIT: Most do, but I've seen 90.73 and some others as well), but it has been re-signed and made only to accept the newest kernels, so your green lens is stuck without camera. Only the latest Motorola sbfs are bootloader7 (as of june 2012)
Click to expand...
Click to collapse
Thanks.
---------- Post added at 02:35 PM ---------- Previous post was at 02:34 PM ----------
Auris 1.6 vvt-i said:
He can root, he can flash custom ROM's, but the only kernel he can use is the GB kernel, so camera won't work (he has green-lensed camera) and if he tries to flash a Froyo kernel, he will end up with a BL error.
Click to expand...
Click to collapse
Thanks.
Hi all...
Maybe supid question...
I have bought on ebay black motorola defy+ as my 2nd phone.
In about was model MB526. So i have not tested all functions and i directly installed original sbf, then rooted sbf, then cwm recovery.
Then i enter in cwm recovery and install cm-7-20121008-unofficial-jordan_plus-signed.zip and gapps.
All was okay...but now classic defy camera problem - camera is green.
When i tried open camera it say Cannot connect to camera. Catlog say Could not open camera hw.
Under battery on sticker is MOTODEFY MVQ7-334411D11
SM2805AE7E1
L026NU6276
I can give imei too...
My question is...is this really defy+ ?
...and is possible to have defy+ with green camera?
THX
I dont think this is unheard of. Ask the seller for a refund
Sent from my MB526 using xda app-developers app
Harry GT-S5830 said:
I dont think this is unheard of. Ask the seller for a refund
Sent from my MB526 using xda app-developers app
Click to expand...
Click to collapse
...so you think this is classic defy MB525.
Is on internet any imei checker, or motorola warranty check?
CornholioGSM said:
...so you think this is classic defy MB525.
Is on internet any imei checker, or motorola warranty check?
Click to expand...
Click to collapse
You can check on Motorola.com with IMEI
you have to register then go to my registered products and tipe IMEI
...okay...so this defy is really MB525.
Sh*t
...so i have MB525 with 526 firmware and there is no bootloader downgrade for camera works.
Right?
Sorry for reviving a thread from early December... but before I made my own thread about a similar issue I decided to hick-jack this one.
So someone gave me a Motorola Defy (MB525, MKQ7 334411B11 according to the sticker on the board) as a gift. It is a GREEN LENS, Motorola Defy from T-Mobile US.
Well they gave it to me 'semi bricked' after the person flashed it with a CM10 rom build made especially for the Defy+ (MB526).
According to my research the latest build for the Defy (MB525) is from September 24.
I have tried it but the phone keeps acting up.
Is there anything I can do to make the phone work again??
EDIT: Apparently, the phone was flashed with a JRDNEM_U3_3.4.2_177-005... sbf and it originally had android 2.1. Dunno how much that information helps...
Serach google for downgrading
I read about an Bl.7 Sbf which have an froyo kernel
So maybe there is a way to create green lens .sbf with bl.7
Look for threads from walter79
You can try Quarx 2ndboot rom, they should work on all Defy's
MB525 red lense
bone101 said:
You can try Quarx 2ndboot rom, they should work on all Defy's.
Click to expand...
Click to collapse
Can anyone else confirmed this?? I am trying to revive this Defy and if those work I know what I will flash it with later.
Edit: Quarx 2ndboot roms, use custom kernels that work on both. Confirmed.
It was flashed with
Code:
"JRDNEM_U3_3.4.2_177-005_VFBLUR_SIGN_SIGNED_USAJRDNEMARAB1B8VFAT03A.0R_PDS03C_USAJRDNFRYOVFAT_P015_A016_M001_HWp3_Service1FF.sbf"
because my friend was scared that the T-Mobile USA sbf that he found would be "too" up to date making it harder to downgrade later.
I read here that the T-Mobile provided sbf here are the original Eclair and the Eclair updated (which this phone originally had). So, is it safe to download them, flash the phone with them, and start from square one by myself?
Any answer would be appreciated.
Just read the "All-in-One Defy Beginner's guide" and flash with RSD to a froyo sbf...
Hi Guys!
I'm come to Defy from LG GT540, so I don't know much about this phone.
So I just got the phone fom second hand (the person tried to root is, but failed...) and it just don't want to work.
I can't turn it on, just when I plug it into my PC a white LED lights up and that's all. I can't get into CWM or anything BUT I CAN USE RSD LITE!!!!! It recognises the phone and I can flash files to it. I tried couple of times, but NOTHING CHANGED.
I don't know anything about the phone's past (what type of CG of OS was on is)
I would really apprechiate your help Guys!
ToMpI97
ToMpI97 said:
Hi Guys!
I'm come to Defy from LG GT540, so I don't know much about this phone.
So I just got the phone fom second hand (the person tried to root is, but failed...) and it just don't want to work.
I can't turn it on, just when I plug it into my PC a white LED lights up and that's all. I can't get into CWM or anything BUT I CAN USE RSD LITE!!!!! It recognises the phone and I can flash files to it. I tried couple of times, but NOTHING CHANGED.
I don't know anything about the phone's past (what type of CG of OS was on is)
I would really apprechiate your help Guys!
ToMpI97
Click to expand...
Click to collapse
Red or Green lens? It was flashed with 2.3 - dont know what, but try to flash BL5, if still white led - flash BL6, if BL6 not works - BL7 - but if you have green lens - camera will never work on stock BL7 - only on custom roms with custom kernel.....
turffe said:
Red or Green lens? It was flashed with 2.3 - dont know what, but try to flash BL5, if still white led - flash BL6, if BL6 not works - BL7 - but if you have green lens - camera will never work on stock BL7 - only on custom roms with custom kernel.....
Click to expand...
Click to collapse
Unfortunately I have green lens.
Can you link me those .sbf files that I need??
ToMpI97 said:
Unfortunately I have green lens.
Can you link me those .sbf files that I need??
Click to expand...
Click to collapse
st
http://forum.xda-developers.com/showthread.php?p=37629082#post37629082
turffe said:
st
http://forum.xda-developers.com/showthread.php?p=37629082#post37629082
Click to expand...
Click to collapse
Which??? Or what I have to do???
Big freakin' update!!!!!!!!!!!!!!!!!!!!!!!
Guys, i finally succeeded to bring my device back to life with
DEFYPLUS_U3_4.5.1-134_DFP-231_CN_SIGN_UCADEFYEMARAB1B50AA009.0R_PDS03C_USAJRDNGIBRIRD15_P015_A030_Service1FF.sbf I think it's CG ver. 7 and ver. 7
It booted, wirking fine... It's Android 2.3.6 (maybe doesn't eally matters now...), but I don't have camera. Is there a patch for it or can you recommend an other .sbf to install???
I really apprechiate your help!!!!!!!
ToMpI97:laugh:
ToMpI97 said:
Guys, i finally succeeded to bring my device back to life with
DEFYPLUS_U3_4.5.1-134_DFP-231_CN_SIGN_UCADEFYEMARAB1B50AA009.0R_PDS03C_USAJRDNGIBRIRD15_P015_A030_Service1FF.sbf I think it's CG ver. 7 and ver. 7
It booted, wirking fine... It's Android 2.3.6 (maybe doesn't eally matters now...), but I don't have camera. Is there a patch for it or can you recommend an other .sbf to install???
I really apprechiate your help!!!!!!!
ToMpI97:laugh:
Click to expand...
Click to collapse
Why you flashed BL7 SBF? First you needed to test on BL6 or BL5 - if it booted you should have working camera with froyo kernel..... Now your camera will NEVER work with stock roms & cm7..... Last hope is CM10.1/10/9 or MIUI 4 ics with 2ndboot....... Only on 2ndboot roms....
turffe said:
Why you flashed BL7 SBF? First you needed to test on BL6 or BL5 - if it booted you should have working camera with froyo kernel..... Now your camera will NEVER work with stock roms & cm7..... Last hope is CM10.1/10/9 or MIUI 4 ics with 2ndboot....... Only on 2ndboot roms....
Click to expand...
Click to collapse
I tried to flash CG5 and CG6, but without success...
Yan anyone tell me how to install a custom recovery, because I don't have a root access
Follow the instructions carefully
ToMpI97 said:
I tried to flash CG5 and CG6, but without success...
Yan anyone tell me how to install a custom recovery, because I don't have a root access
Click to expand...
Click to collapse
All in one guide for defy:-
Follow the instructions carefully :-
http://forum.xda-developers.com/showthread.php?t=1756234
I really apprechiate your help, but I can't install boot menu to install a Cust. Recovery, BECAUSE I DON'T HAVE ROOT ACCESS!!!! (And I'm not be able to have, because it's BL7 )
Any ideas what I should do?
Just search for bl7 defy root
http://forum.xda-developers.com/showthread.php?t=1542956
Sent from my MB526 using xda premium
Fixed!!!
UPDATE: PHONE FIXED!
Finally I succeeded to flash a rooted .sbf which is maybe: http://forum.xda-developers.com/showthread.php?t=1542956
Than I installed a 2ndBoot CM10 JB and it runs AWESOME!!!!! Everything works like camera, flashlight, etc...
It runs max. at 1,2GHz undervolted and it's ROCK STABLE. Overwhelming 3D performance and I can talk about the cos all day :laugh:
So, THANK YOU VERY MUCH FOR YOUR HELP GUYS!
You are really awesome!
ToMpI
THANKS!
I`m from Brazil, and i was in same situation!
I take my defy+ today and the phone had CM10, really instable!!!
Now, I did what the Chamelleon said and thats all okay!!!!!!!
really, really really thanks!
:good:
ToMpI97 said:
Hi Guys!
I'm come to Defy from LG GT540, so I don't know much about this phone.
So I just got the phone fom second hand (the person tried to root is, but failed...) and it just don't want to work.
I can't turn it on, just when I plug it into my PC a white LED lights up and that's all. I can't get into CWM or anything BUT I CAN USE RSD LITE!!!!! It recognises the phone and I can flash files to it. I tried couple of times, but NOTHING CHANGED.
I don't know anything about the phone's past (what type of CG of OS was on is)
I would really apprechiate your help Guys!
ToMpI97
Click to expand...
Click to collapse
flash the sbf
First flash this http://sbf.droid-developers.org/umt..._USAJRDNGIBRRTCEE_P022_A022_Service1FF.sbf.gz
After flashing wipedata and cache from stock recovery or else you will stuck on boot animation and wait for some some time it will boot.
Then this flash this to gain root access http://www.mediafire.com/?76z12j1at3etf4j
then install 2nd init and CWM and install cm10 or what ever.