Database Users

[q] booting problem

I am facing a strange problem with every android rom i am using.
When i open the haret.exe to run the android then boot screen stops at this error.ss
/bin/sh: can't access tty; job control turned off
and then nothing happens. i have to take to take out battery and insert again to use wm and den if i again try to run android then same problem occurs.
But if i delete all folders in sd card of android rom except 1gb data.img and den extract all folders back in sd card den it starts working..
But again it wont work on next restart or shut down..
any idea..???
using energy rom oct radio 2.07.50.27_2

no one facing this issue????????????????????

I've heard that you should not have a radio below 2.12
Sent from my HTC HD2 using XDA App

Also, try change your womrom and post in the right forum. This is development section
EDIT: winmo rom*
Sent from my HTC HD2 using XDA App

Have u tried formatting your sdcard
Sent from my HTC HD2 using XDA App

norpan111 said:
I've heard that you should not have a radio below 2.12
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
norpan111 said:
Also, try change your womrom and post in the right forum. This is development section
EDIT: winmo rom*
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
veda_sticks said:
Have u tried formatting your sdcard
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
Thanks guys for your replies. and i have tried with radio 2.14.50 also.. but same issue.. and i formatted my card many times. still same problem. First boot is ok. everything works fine. but after restart from winmo it doesn't boot.
And I am using Android capable Energy rom. so i think this is not a rom related problem.

mon_money said:
Thanks guys for your replies. and i have tried with radio 2.14.50 also.. but same issue.. and i formatted my card many times. still same problem. First boot is ok. everything works fine. but after restart from winmo it doesn't boot.
And I am using Android capable Energy rom. so i think this is not a rom related problem.
Click to expand...
Click to collapse
can you upload the file startup.txt maybe something messed up?
also can you write the folder you are installing the rom, and please write the rom name.
regards

boldman78 said:
can you upload the file startup.txt maybe something messed up?
also can you write the folder you are installing the rom, and please write the rom name.
regards
Click to expand...
Click to collapse
Startup file data
set mtype 2525
set ramaddr 0x11800000
set ramsize 0x1e400000
set initrd_offset 0x00a00000
set KERNEL zImage
set initrd initrd.gz
set cmdline "rel_path=android data_size=1024"
#rel_path: Android ( this is the android folder in the sdcard)
# data_size: 512 for 512MB, 1024 for 1gb, 2048 for 2gb ( specify the size of data.img)
and m using tytung nexushd2-frg83 v1.3 release date 12 oct 2010
and i am having this problem with every Android rom i am using. and m extracting all folder in root of sd card.

My to
I experienced this problem to.
Here are some steps i prompted.
1. Format your SD card by using the Format Option at your phone.
2. Run a Stock ROM from HTC, download a ROM update from the HTC website.
3. Always use a Radio 2.08 or above.
So what you are gonna do is as follow.
Format your SD card, install a fresh original ROM from HTC. After that remove the black plate, and press the RED button for 5 seconds. After that install Radio 2.15 it can be found trough Google. Then put Android folder in the root of your SD card, and run the *****!

c0r1tr0n said:
I experienced this problem to.
Here are some steps i prompted.
1. Format your SD card by using the Format Option at your phone.
2. Run a Stock ROM from HTC, download a ROM update from the HTC website.
3. Always use a Radio 2.08 or above.
So what you are gonna do is as follow.
Format your SD card, install a fresh original ROM from HTC. After that remove the black plate, and press the RED button for 5 seconds. After that install Radio 2.15 it can be found trough Google. Then put Android folder in the root of your SD card, and run the *****!
Click to expand...
Click to collapse
Thanks for your help. but i dont think 2.15.50 radio is compatible with stock 1.66 rom. for stock roms i think radio with 2.x.51 is needed..
Anyways will try these steps and will tell the result.
big thanks for your help again.

2.15 will run flawless on 1.66 stock rom. I'm running it on a 1.66 stock ROM to.
If it doesn't work, just reply and i'll try to help you out.
Link for the Radio I'm using:
http://www.vbnfiles.com/xda/HTC HD2 (Leo)/Radios/Radio_2_15_50_14.rar
Link to the Android i'm running. It runs verry smooth and flawless.
http://forum.xda-developers.com/showthread.php?t=747492

c0r1tr0n said:
2.15 will run flawless on 1.66 stock rom. I'm running it on a 1.66 stock ROM to.
If it doesn't work, just reply and i'll try to help you out.
Click to expand...
Click to collapse
Olryt will try it . but actually i am using 2.07.50 radio which gives excellent battery life and internet speed for my area. i used 2.14,2.10,2.12,2.08. but none of them gave me satisfaction like this radio.
and one more thing. if this is radio related problem then how come first boot is completed?? no robot voice on call fast internet speed and rest of the things working very fine and fine battery life as well on 2.07.50
any idea????
thx 4 ur reply.
edit: I already used that same darkstone rom yesterday for android.. but having same problem..

mon_money said:
Startup file data
set mtype 2525
set ramaddr 0x11800000
set ramsize 0x1e400000
set initrd_offset 0x00a00000
set KERNEL zImage
set initrd initrd.gz
set cmdline "rel_path=android data_size=1024 loop_partition=mmcblk0"
#rel_path: Android ( this is the android folder in the sdcard)
# data_size: 512 for 512MB, 1024 for 1gb, 2048 for 2gb ( specify the size of data.img)
and m using tytung nexushd2-frg83 v1.3 release date 12 oct 2010
and i am having this problem with every Android rom i am using. and m extracting all folder in root of sd card.
Click to expand...
Click to collapse
try to add this "loop_partition=mmcblk0to" your startup.txt so the line will look like that:
set cmdline "rel_path=android data_size=1024 loop_partition=mmcblk0"
hope it will help
regards

boldman78 said:
try to add this "loop_partition=mmcblk0to" your startup.txt so the line will look like that:
set cmdline "rel_path=android data_size=1024 loop_partition=mmcblk0"
hope it will help
regards
Click to expand...
Click to collapse
NO luck.. i tried it but again same problem. booting stops at same error.
but few new lines comes after adding that line which are as follow
Failed to find rootfs on sd card, you need to unzio a rootfs zip file to the root of your sd card
** it is already present on the root of my sd card..

Strange problem....
My you need to try another SD Card or something? May some files get corrupted by your phone? Cause it seems to boot without problems at the first time, but after that it won't fire up anymore. You tried the Android i listed in my last post already? I can upload it to my host if you want, so you dont need to wait for ages to get the download complete.

mon_money said:
NO luck.. i tried it but again same problem. booting stops at same error.
but few new lines comes after adding that line which are as follow
Failed to find rootfs on sd card, you need to unzio a rootfs zip file to the root of your sd card
** it is already present on the root of my sd card..
Click to expand...
Click to collapse
try these steps in running Android, never failed me everytime
you need to have
1. HSPL
2. SDcard formatted with SD Formatter from Panasonic
3. at least an Android friendly WINMO ROM (though some people have reported being
able to run android on the latest stock 3.14 ROM)
as you have a really strange problem
i suggest you do a Task 29 on your device, before flashing the winmo ROM

Your problem is your using 2.07 radio. You need 2.08 and higher. This is discussed in almost every build thread if this section.

c0r1tr0n said:
Strange problem....
My you need to try another SD Card or something? May some files get corrupted by your phone? Cause it seems to boot without problems at the first time, but after that it won't fire up anymore. You tried the Android i listed in my last post already? I can upload it to my host if you want, so you dont need to wait for ages to get the download complete.
Click to expand...
Click to collapse
" Thx for your extreme help bro. but i have almost all android roms downloaded already. but this same problem is bugging me alot.. anyways m buying an extra sd card tommorow for android.. will try from that one. then revert you back."
jigners said:
try these steps in running Android, never failed me everytime
you need to have
1. HSPL
2. SDcard formatted with SD Formatter from Panasonic
3. at least an Android friendly WINMO ROM (though some people have reported being
able to run android on the latest stock 3.14 ROM)
as you have a really strange problem
i suggest you do a Task 29 on your device, before flashing the winmo ROM
Click to expand...
Click to collapse
" I have hspl2 2.08 installed.. and i formatted my sd card with sony card reader and then again formatted with hd2. i am running android friendly rom ENERGY already.. and i always do task29 before upgrading my hd2 to a new rom..
Everything works fine on first boot.. it is just after restarting it doesn;t work.."
mattfmartin said:
Your problem is your using 2.07 radio. You need 2.08 and higher. This is discussed in almost every build thread if this section.
Click to expand...
Click to collapse
" i have tried with 2.10,2.12,2.14 and 2.15 radios.. all .50 but same problem .. no luck.."

Me too!
I'm having the exact same problem. I as well have followed all steps.

not developer
try to format the hd 2

[Q] Need help getting android

Ok im new and nobody has written me back about this so i have to ask this way but i flashed to the energy rom and i want android on it, i dont know how to go from where im at to that as all the threads ive seen has said download this and that but i really dont kno how to get energy off to do that but when i hit the launch android button it says "CLRCAD.exe was not found on your storage card...proceeding to launch Haret anyway" ok then "Haret.exe was not found on your storage card..." so can any body help me get android???
Hardware is:
RAM size 576MB
Flash memory size 1024MB
Data bus 32 bits
Software is:
OS version 5.2.21916
Manila version 2.5.20191914.0
ROM version 26 Jan.2011 WWE
Radio version 2.10.50.26

Firstly there are 2 ways of running Android, 1st via sd card and 2nd via NAND memory. The option you choose depends on whether or not you still want to use winmo. If so you need to use the sd card based Android builds. If you only want to use Android then you need to go the NAND based Android build approach.
As you mention running clrcad and haret I'm assuming you want to use the dual bot method, ie both winmo and Android. You will then need to device which Android build you want to try (from the Android SD dev forum) and carefully read the first few posts to see the dev's instructions, but in most cases you need to download and unzip the rom and copy the Android folder to the root of your sd card. In the NRG roms, clicking on the launch Android icon he includes in his build will run the clrcad and haret automatically and boot to Android.

thanx for your reply..thats the thing when i hit launch android it wont go...so when i copy the folder do i download everything even if it says its already on an if installed it might not work? thats where im lost

Try formatting the sd card completely so that there are no funnies on the card, copy the entire Android folder to the sd card root and you can ignore the warning about files that may not work etc.

ok ill give it a try

when you format your sd card will it erase the NRG rom and then you have to put it back on there?

1989jeremy said:
when you format your sd card will it erase the NRG rom and then you have to put it back on there?
Click to expand...
Click to collapse
No! Unless you will install nandroid.
Sent from my HD2 Droid HD using XDA App

ok just checkin..i want android on my sd card

ok i formatted my sd card then copied the android folder to it and it still did launch an when i clicked on the folder to run clrcad it didnt do anything an when i clicked the heret it just went to the htc screen and thats it...what did i do wrong??

Did you give it some time? I would ask the question in the thread for the actual rom you are using. Other users may have a solution for you.

1989jeremy said:
ok i formatted my sd card then copied the android folder to it and it still did launch an when i clicked on the folder to run clrcad it didnt do anything an when i clicked the heret it just went to the htc screen and thats it...what did i do wrong??
Click to expand...
Click to collapse
Good, so you've formatted your sd card and copied the android build, clrcad and haret.exe files to the root....Tapping clrcad (to run) doesn't show any visible signs but its actually working in background, then tap haret...u should see haret loading up & a bunch of text briefly (depends d android build)...The htc screen u saw means d android build is working silently in d background so give it some time...check d android build's page for how long you should wait..(most tk abt 8-20mins, i use nand now so i'm not so sure).....if the above still doesn't work for you,then u should try using d various android/winmo dual-booting cab files out there...
P.S. Devs say its best u load up android within 3 secs of loading WinMo, so be as fast as u can...u could also try disabling htc sense to give a quicker loading time....If dat still doesn't work, then u might have to reflash an android-friendly WinMo ROM.

lol i dont think i gave it enough time..kinda impatient but i got it at the htc screen right now..im using the froyostone v4.0 build

1989jeremy said:
lol i dont think i gave it enough time..kinda impatient but i got it at the htc screen right now..im using the froyostone v4.0 build
Click to expand...
Click to collapse
Dis you read the faq of the build you use? Like, wait 10-15mins on first boot...
Sent from my HD2 Droid HD using XDA App

1989jeremy said:
lol i dont think i gave it enough time..kinda impatient but i got it at the htc screen right now..im using the froyostone v4.0 build
Click to expand...
Click to collapse
Great...Remember 2 always read instructions carefully..the Devs put em there for a reason.

hmm...its been like 40 min an still at the htc screen...i looked for the thread but i cant remember which it was as ive been to a couple of them but neither one says how long the first boot would take

1989jeremy said:
hmm...its been like 40 min an still at the htc screen...i looked for the thread but i cant remember which it was as ive been to a couple of them but neither one says how long the first boot would take
Click to expand...
Click to collapse
Try core evo sd series.
Sent from my HD2 Droid HD using XDA App

do you have the link to the thread? i dont wanna download somethin different you know as a lot of things pop up in search

1989jeremy said:
do you have the link to the thread? i dont wanna download somethin different you know as a lot of things pop up in search
Click to expand...
Click to collapse
Just go to sd development section, it should be on the 2nd page of that section. Try core evo v0.8 by sergio76 or evo carbon remix by motoman.
By the way, what sd card do you have? Model, make, size, class.
Sent from my HD2 Droid HD using XDA App

ok thanx..itll work with the energy rom right?

1989jeremy said:
ok thanx..itll work with the energy rom right?
Click to expand...
Click to collapse
Of course. That's what I was using before nandroid.
Sent from my HD2 Droid HD using XDA App

MccMBoxmaX Transformer SS V4.5 Gingerbread 2.3.3[Sense 3.0] IN 3D

I am a noob and have been able to convert my HTC HD2 to android on two occasions. My third attempt has been the most challenging. Im trying to install MccMBoxmaX Transformer SS V4.5 Gingerbread 2.3.3[Sense 3.0] IN 3D and have tried EVERYTHING. Every thread that I can find, every way that has been explained and cannot get this one installed. My phone at this point boots into MAGLDR then reads sd kernel open failed. I updated to Tytung r5 and that did not work. I have been able to work through everything else to get android on my HTC through threads from XDA and it's been more than worth it. Please help.

Are you installing on sd or NAND ?
Never mind, it's an sd build. Anyway, since Im currently using cLK and booting from nand Im not really sure where it is at but you are supposed to set the directory of your android build (where the zimage stays). I think it's in option "10.Services" in magldr .. set the dir and try again.

Could you please explain further "set the directory of your android build (where the zimage stays). " TY

Surely you could just reset through stock Windows 6.5 (there are many guides), then boot it up via clrcad and haret? Or use an automatic build loader?
Also, if after this you still have trouble booting, change the WinMo rom. I'm using OZDroid, which is plain Windows 6.1 (I think, TBH I couldn't care less) with a dualboot app built in to the ROM.

i had this problem a few times before, "sd kernel open failed" is in red writing correct? sorry to say im not sure what caused it but i can tell you what worked for me to fix the problem.
1st i re-installed MAGDLR, 2nd i re-partitioned my phone to the correct specs the ROM i was using suggested, & last i re-downloaded the ROM and placed it on my sd card.
i know this seems like a lot of work but its the only thing i've come across thats worked every time. i've had to do this twice now. if you ever find out the cause i'd like to know & if i find out whats causing it i'll let you know as well.

Much thanks. Exactly what I ended up doing and works fantastic!
Sent from my HD2 Transformer using XDA Premium App

[Q]How to create RUU android rom installer?

Anyone tried to made an RUU bassed rom installer for hd2 using an android.img? I know it is hard for example for it I need to have installed hspl + radio compatible for that rom. So question is:
if is possible to pack to nbh:
- magldr part
- misc part
- recovery part
- boot part
- system part
- cache part
- userdata part (maybe is hard becouse use all space, and maybe ruu will be ~500M?)
Anyone have experience?

I know you can flash clk without a computer by changing the name to leoimg.nbh .. you put it on the root of the SD card and hold volume down + end.
Isn't the problem with flashing a rom like this the boot scripts?
Sent from my HD2 using xda premium

Ok thanks, I know that allready but not tried to create full pack for hd2 including magldr and android part. I think magldr is allso instalable trought LEOIMG.nbh?

Idk probably. I think its possible that your onto something. I'm not a developer but seems like you could back up your entire system to a nbh file maybe and flash it .. that's the way you return to stock and uninstall hspl.. if windows can boot like that theirs a good chance android can to.
Maybe its to much effort?
I do think their is a bigger chance of bricking your device using this method.
Sent from my HD2 using xda premium

munjeni said:
Ok thanks, I know that allready but not tried to create full pack for hd2 including magldr and android part. I think magldr is allso instalable trought LEOIMG.nbh?
Click to expand...
Click to collapse
I'm using cLK 1.5 and that's the method I used just to try it. Its quicker and easier.
Sent from my HD2 using xda premium

[Q] My Android OS is not fucntioning.

I am running on MIUI Android 2.3.9 and it is a mess, it kept popping up error messages "Google framework" and i dont have any google services, such as Play Store, Gmail, and i cant receive SMS, and my bluetooth also not functioning, and cannot delete anything from the SD card from the phone, i have to take out the SD card and plug it in into a computer just to delete music,video and pictures.
Was hoping to change for a new OS, but the problem is my usb port is also not functioning. I even have to charge my battery using a third party charger.
Is there anyway i could change my OS with using the usb port. Can i use the SD card instead to do all the works.
And if can, what OS should i get and how.
Dear good Sir, PLEASE HELP, im a complete NOOB. I know nothing about phones and how to mod it. The one who helped my change my phone from Windows to Android is a phone shop, that now doesnt do it anymore.

Search for clk 1.5 This can be installed from the sdcard and will also Install a version of recovery.From the clk menu you can partition your nand to the required size for your chosen ROM. Read carefully and you will be fine.
http://forum.xda-developers.com/showthread.php?p=20519266
There you go. .
Sent from my NexusHD2 using xda premium

If you mean change ROM, then you can do what Shanman posted. If you mean actually change OS from android to Windows Mobile 6.5 (a stock ROM), you'll have to flash a LEOIMG.nbh in the boot loader (Google how to do this). If you want to flash Windows Phone then I'm afraid I don't think there's any way to do that.
Sent from my Nexus 4

shanman-2 said:
Search for clk 1.5 This can be installed from the sdcard and will also Install a version of recovery.From the clk menu you can partition your nand to the required size for your chosen ROM. Read carefully and you will be fine.
http://forum.xda-developers.com/showthread.php?p=20519266
There you go. .
Sent from my NexusHD2 using xda premium
Click to expand...
Click to collapse
Thank you dear sir. I think that'll help. Thank you so much.