Nexus 7 All in One Dock Station - Nexus 7 Q&A, Help & Troubleshooting

Dock Station for Nexus 7
Normal Usb for external hdd
Hdmi output
Charge funktion
Micro sd slot
Sdhc card slot
Do you think can be make like a dock station?

In theory, yes. I don't think you'll see an official one though. Especially since you can't use external storage without rooting and using Stickmount.
Sent from my Nexus 7 using Tapatalk 2

Uh, the pogo pins are power, positive data, negative data, and ground. Not sure what kind of video out you could really get out of it, bit we know we get audio out at least from the official docks that have been leaked. The dock had a micro USB port, but I doubt it'll be compatible with anything but a charging cable. A pogo pin dock leaves the device's micro USB port open, so it wouldn't be from the dock, but you would have the capability for outside otg. -Ara
Sent from my Nexus 7 using xda app-developers app

Normal USB for External HDD - NO
HDMI Output (Via Dock) - NO
Charge Function - YES
MicroSD Slot - NO
SDHC Card Slot - NO
The dock uses the 4 POGO pins. Not going to see most of what you are asking about using those.
The "Official" dock will have two ports... 1 MicroUSB for Charging (not data) and a 3.5mm speaker line out. That's it.
Anything else would need to be done wirelessly including HDMI via WiFi-Direct.
An off-market dock using the MicroUSB port (not the pogo pins) might provide data along with power and sound, but still no HDMI etc...

Related

Usb host on dell streak

Looks like the streak might have usb host... if you look in the sdcard settings it has the option to unmount ums (usb mass storage) devices and the option to format them.
Im on the 8105 2.1 o2 rom on a us att dell streak.
Ill make a cable soon to test but was wondering if anyone else tried th already
Sent from my Dell Streak using XDA App
If the option can be found in 1.6, I may already have the hardware to test it.
This would be a beautiful thing!
I just so happened to have the correct hardware on hand to try this so I gave it a go, looks like it does! I'm actually typing this message with a USB keyboard- I can't get it to mount a USB drive yet, but I intend to brush up on my Linux commands and syntax tomorrow and try again- if I can get it to mount external storage, all of my dreams have officially come true (minus the Froyo, that is).
Edit: I'm on the MoDaCo custom ROM r2, 2.1 build 8105, for those interested.
Sent from my Dell Streak using XDA App
Hey there, real interested in what you did to mod your cable to handle this. Was it a matter of tying the OTG pin to ground?
Did the streak supply power over usb? Many android devices cant, but I believe given the right cable mod the streak can.
I didn't have to do any mods on mine, I have the home dock (which converts the Streak's port to miniUSB) and a dongle that has male miniUSB on one end and female standard USB on the other. Streak on the dock, dongle in the back of the dock, and keyboard into the dongle.
I don't know if it supplied power or not, what would be the best way to check? Multimeter across the power/gnd should give 5V regardless of if it's powered, do I need to check the amperage as well? I was thinking I might just try firing up the ol' G1 and plugging it in, to see if it charges.
Sent from my Dell Streak using XDA App
A good test would be to not have the dock plugged in to any power source. Dock your Streak, then use your adaptor with USB keyboard. Does it work? if so, the power is being supplied by the Streak.
If not, it doesn't prove that there is no way to get powered USB host out of the Streak, it would just show that it may require different connections (a modded cable or dock).
Then yes, it supplies power, my dock was unplugged the whole time. Rejoice! I foresee emulators with a USB gamepad in my near future...
Sent from my Dell Streak using XDA App
That's great to hear! Game controller for EMU's is what I'm looking to do with it as well
Funny though, I tried the same with a gender changer a week or so ago and it didn't work for me. I think the difference must be that the cable you're plugging in to the dock must ground the OTG pin.
Unfortunately that probably means I'd either have to get a dock, or dissect and solder my USB cable to get the same.
Glad to see it works as i suspected. now all we need is some to make it mirror the display over the hdmi out
Sent from my Dell Streak using XDA App
Ah, I wondered what that meant. I have the home dock and saw Win7 did something funny... it's all a bit beyond my abilities so I look forward to someone doing interesting things with it
how can we make a usb cable with "usb host" feature ?
mrmrmrmr said:
how can we make a usb cable with "usb host" feature ?
Click to expand...
Click to collapse
EiHter using the media dock with a male mini usb to female usb adapter, or i think using the standard usb cable with a female to female adapter placed on the end should work too.
Sent from my Dell Streak using XDA App
keatonreckard said:
EiHter using the media dock with a male mini usb to female usb adapter, or i think using the standard usb cable with a female to female adapter placed on the end should work too.
Sent from my Dell Streak using XDA App
Click to expand...
Click to collapse
Unfortunately I don't think a female to female adaptor alone will do the trick with the Streak USB Cable. I have one here, and it's not working.
I believe the reason is the USB OTG pin needs to be grounded to identify that we are in USB OTG mode (pin 4 as identified here http://en.wikipedia.org/wiki/PDMI).
I think the reason it's working with the dock for that person is because the dock exposes that pin at the mini B port and the cable adaptor he's using is an OTG cable that grounds the pin.
I haven't tried modding my cable for this yet, but will soon. My soldering iron is in storage right now unfortunately.
Ok; I understand that we have to connect OTG pin (no 4 on PDMI) to GND (no 2 on PDMI)
Is that correct ?
Is there a way to do it on the other end (not the PDMI side but USB side) ?
Because I don't want to break my only Dell Streak data cable...
Unfortunately, no. only 4 wires run through the cable and are exposed at the other end. You would need a 5th (the USB ID, aka OTG lead).
So I just finished creating my own modded cable and it is working great.
I've attached pictures of the build here. I found that this only works in Android 2.1 (8150 build for me, may work with other 2.1 builds). 1.6 seems like it doesn't have the drivers for this.
DISCLAIMER: If you try to duplicate what I did here, you're taking the risk of damaging your cable beyond repair, and if you do something incorrectly and plug the cable in to your Streak, there is a definite possibility you will damage your streak permanently. So anything you do, do so carefully and at your own risk!
I will say this; this cable is HARD to de-shield! It has metal shield all around the parts we need to get to, and I had to cut with metal clippers and desolder parts of it to get the shielding off. Not pretty, and pretty risky for damaging the cable. I would advise you buy an extra cable before trying this. I didn't have an extra, but I was really risking not being able to charge my device or something if I broke my cable.
After removing the shielding you can see that there is a small PCB with traces marked 1 3 on the left, and then 2 5 on the right. These correspond to the PDMI specification at http://en.wikipedia.org/wiki/PDMI .
For my build, I chose to solder a switch to bridge the OTG pin 4 to GND pin 2. This way, my cable can still be used as a normal USB cable as well. In one image I have flipped the opened PDMI connector over and you can see an orange wire I have soldered on to pin4. (One side of the PDMI connector has ODD pins, like 1,3,5,7... the other side has EVEN 2,4,6,8...). Pin 2 is the first pin on the right on the EVEN side, and pin 4 is the second.
As was stated in earlier posts, you can use a female to female gender changer for the other end of the USB cable, rather than soldering on your own connector or something.
Note that having the cable in OTG mode when plugging your streak in to your computer or power adapter over USB could damage something because OTG mode will start outputting power over the same pins that it's usually inputting from!!!
0TheRain0,
This is great !
Thanks for sharing your findings.
I sent you a PM; please check it when you have time...
When I built my Dell Streak Mini USB adapter, I brought out PDMI pin 4 to the OTG pin on the Mini USB.
I tried it with 2 different cheap Mini USB to Standard USB ("A") female adapters, and tried several devices including a Apple Mini Keyboard/Hub, and USB Flash drives.
I also tried the same components on the Dell Home Dock.
They did not work, but I suspect that the Mini USB to Standard USB female adapters do not short the OTG pin to ground.
What we need is some that do. Then it would be plug and play at least for dock owners.
Edit:
These claim to enable USB host mode when Connected to a N800:
http://www.electronicproductonline.com/catalog/product_info.php?products_id=2043
Therefore Should require no modification to use with the dock, as long as the dock brings out pin 4, which as far as I remember, my testing said it did.
This thread is currently of great interest. Should it, in theory, be possible to hook up my Canon digi SLRs as mass storage devices then?
Sometimes being able to get the image onto a bigger screen has it's benefits. The Streak's screen is actually very well calibrated as well, compared to my hardware calibrated monitor!
In the ideal world i'd be able to tether and shoot using the streak (like I can with my laptop) but I'm realistic and know that's not likely to happen!
What I DON'T get is why Dell have put in USB host functionality without implementing it in the lead?
Well, I was going to hold off on cutting up a cable to try something, but I just had a cable go through the washer and dryer... and it was looking pretty bad and actually cut through the jacket and shielding on the wire... so I cut off the PDMI lead and about 3" of cable (right before the break).
Inside the jacket are 4 wires. Black, White, Green, Red. Obviously they correspond to the USB 2.0 spec... so I guess in some way, VDC, Ground, Data+, Data-... but no OTG wire.
Would anyone that opened up the connector know how these wire colors correspond?
What I really want is for my 80GB iPod to have it's music available to the Streak in my car, so here's what I was planning:
1) Cut up the Dell PDMI cable (done).
2) Cut up an old iPod to Firewire cable I have laying around
3) Splice VDC+ and Ground on the iPod and PDMI to the corresponding VDC+/Ground USB end of the original Dell Cable. This will plug into a 12V->USB Adapter (probably the Dell one) to power and charge both devices.
4) Splice the corresponding PDMI and iPod data transfer wires.
5) Ground OTG on Streak side and add a micro switch, like TheRain did...
I can then wrap this up in some custom cable thing shround thing that I'll figure out.
Little bit of research led me to the micro-AB receptacle that basically determines if a device is acting as a host or slave. So, I would say the preferred way to do this, instead of wiring in a switch, would be to find a receptacle and hack into it... so here's one you can get cheap:
http://www.retractablecables.com/US...ro_AB_Female_Adapter_for_USB_OTG_Devices.html
This should be able to wire up something that basically puts the device into OTG mode when you connect a micro-A cable to the device, and a slave device when you connect a micro-B cable.
So solder/wire that up.. connect the Streak with a micro-A cable to a powered USB hub, connect the peripherals to the hub, and you should be good to go without a micro switch.
On an edit note, I also found a bare micro-AB female that you can buy... but it's more expensive than the previous adapter, so uh I guess it depends on how much time you want to spend tearing the adapter apart.
http://ntcdistributing.com/products/usb-connectors.htm

Noob question: TF onboard flash; included USB adapter

Hello - please excuse the noob question. I tried searching, but couldn't find anything that addressed my question specifically.
1) Is there any difference in performance between the onboard memory and the memory you put in the micro-SD slot? They're both "flash" memory right? Granted, some micro-SD cards are faster than others, so I wonder what class of flash Asus uses in the onboard memory? Would the 16GB version perform any different from the 32GB version?
2) I'm still a little confused about the box contents of the Asus TF and how to use it (I don't have one yet, hence the confusion). It seems like you get a USB cable and a wall adapter? The USB cable can be used to connect the TF to your computer for quickly transferring data. The USB cable can also be connected to the wall power adapter for charging? Is that right? But the wall adapter seems to provide more than the typical 5+ charge voltage that other generic USB power adapters provide, because the Asus wall power adapter can charge the TF in about an hour. Is any of that correct?
But the USB cable can't be used as a USB host, like for a thumb drive (for obvious reasons of not being a female connector, but even if you do the male-female conversion)?
3) I've heard of people connecting their Transformer to an external hard drive. Are they using the USB ports provided by the keyboard dock? Or is there a USB adapter out already that allows the TF to act as a USB host?
Thanks!
coachclass said:
Hello - please excuse the noob question. I tried searching, but couldn't find anything that addressed my question specifically.
1) Is there any difference in performance between the onboard memory and the memory you put in the micro-SD slot? They're both "flash" memory right? Granted, some micro-SD cards are faster than others, so I wonder what class of flash Asus uses in the onboard memory? Would the 16GB version perform any different from the 32GB version?
2) I'm still a little confused about the box contents of the Asus TF and how to use it (I don't have one yet, hence the confusion). It seems like you get a USB cable and a wall adapter? The USB cable can be used to connect the TF to your computer for quickly transferring data. The USB cable can also be connected to the wall power adapter for charging? Is that right? But the wall adapter seems to provide more than the typical 5+ charge voltage that other generic USB power adapters provide, because the Asus wall power adapter can charge the TF in about an hour. Is any of that correct?
But the USB cable can't be used as a USB host, like for a thumb drive (for obvious reasons of not being a female connector, but even if you do the male-female conversion)?
3) I've heard of people connecting their Transformer to an external hard drive. Are they using the USB ports provided by the keyboard dock? Or is there a USB adapter out already that allows the TF to act as a USB host?
Thanks!
Click to expand...
Click to collapse
1) Im using a class 10 card and ive never noticed any 'lag' accessing stuff on the card rather than internal
2) Yes the USB cable supplied can either be used with the wall plug as a charger or directly to a PC for file transfer/sync. I believe people have had mixed results using a mele/female adapter. ASUS are allegedly releasing an official male/female adapter that may have more success.
3) I use an external HD with my keyboard dock. Its USB 2.0 and provides power to to the external drive just fine.
Hope this helps
wilbur-force said:
3) I use an external HD with my keyboard dock. Its USB 2.0 and provides power to to the external drive just fine.
Hope this helps
Click to expand...
Click to collapse
wilbur - how are you connecting the external HD to your Asus? Via the keyboard dock? Or do you have some kind of special USB cable that connects directly to the TF?
learn to read better
coachclass said:
wilbur - how are you connecting the external HD to your Asus? Via the keyboard dock? Or do you have some kind of special USB cable that connects directly to the TF?
Click to expand...
Click to collapse
... with my keyboard dock ....
ok, thanks. Anyone have any word on when/if Asus will release a USB adapter for the tablet itself? I haven't come across it.

[Q] usb otg gamepad question

I have an otg cable, yet none of my accessories work with it and my RAZR MAXX. My question is whether or not I need a powered hub when using the OTG cable. I have seen set ups of other android models using a SIXAXIS controller and otg cable, yet no hub. In this case, it the powered hub not needed since the controller itself is supplying its own power?
Thanks,
Neverused
USB controllers don't work?? I'm interested in this as well
Sent from my Xoom using xda app-developers app
Download USB Device Info:
https://play.google.com/store/apps/details?id=aws.apps.usbDeviceEnumerator
When you open the app you should see 0 devices under Android and Linux tabs. Now connect just your OTG cable nothing plugged into it and hit refresh, something should show up, usually under the Linux tab that identifies the USB host. Even if the USB host doesn't supply power this will still work as I have tested it on my Touchpad which has no OTG power.
If you saw something appear when you connected the OTG cable, than OTG is in the Razr M. Now try connecting your gamepad and refresh the device list. If its not showing up then there is either something wrong with OTG or you need external power. This program will ID any USB device connected, even those which Android doesn't support since its just matching the device against a list it has. Try getting a USB keyboard/mouse working ad those are universally supported on Android and would confirm if USB host works.
Questions go in the question forum too...
Here's a dumb question. I just ordered a female USB to male micro USB. I wanted to be able to yank pics off my camera and drop them on my phone. Would I need an OTG adapter or does that plane adapter work?
Sent from my XT907 using xda premium
agent888 said:
Here's a dumb question. I just ordered a female USB to male micro USB. I wanted to be able to yank pics off my camera and drop them on my phone. Would I need an OTG adapter or does that plane adapter work?
Sent from my XT907 using xda premium
Click to expand...
Click to collapse
An OTG cable has a extra pin in it that is tied to ground in a OTG cable which tells the hardware to switch to OTG mode. A regular USB cable will leave this pin open.
If I'm able to peel open this adapter that I got, and jump pin 4 to 5 should it work as an OTG cable?
Sent from my XT907 using xda premium
agent888 said:
If I'm able to peel open this adapter that I got, and jump pin 4 to 5 should it work as an OTG cable?
Sent from my XT907 using xda premium
Click to expand...
Click to collapse
Its possible, as shown here:
http://tech2.in.com/how-to/accessor...sb-otg-cable-for-an-android-smartphone/319982
For me I'd rather just buy an OTG cable, but if you have regular microUSB cables laying around, go for it.
Bought an OTG cable
Bought a simple OTG adapter from newegg. So far....plugged in a mouse and my camera. Both work flawlessly, my camera gives me the choice of either either MTP (?) that goes straight to gallery and image import, or Storage which prompts to a new usb mount. Have not tried a gamepad yet, I have 2 floating around somewhere but not sure what game to try.

USB OTG Tiny

Is their a tiny USB OTG Adapter? I am getting a micro USB flash drive and I have an OTG cable but its long. I would like a wire that can be as small as possible. Is there such a wire?
I have a micro USB adapter attached to an OTG micro USB adapter ..
Sent from my Nexus 7 using xda premium
I had searched Amazon for 'usb otg cable' and there are lots of them. The one I got is 5" long and had a 90 degree microusb connector so the cable is parallel to the bottom of the N7. You can buy one for $1 or less. I also bought a tiny microusb reader and 32 GB microsd card that plug right in and weigh almost nothing.

[Q] Pogo pins and OTG question [simultaneous charge & OTG?]

I'm wondering if anyone knows if it's possible to have simultaneous OTG & charging with the use of a pogo pin charger?
For instance, plug in a usb OTG into the main microUSB charging port, and use a pogo pin charger [either make one or buy when they are available], and have a flash drive, or hard drive plugged in, and charge at the same time with the pogo pin connector?
I used to have a Nexus 7, and via a custom kernel, and a OTG charging cable [basically a regular OTG with additional power wires & connector for charger]. But I think it would be simpler to use the pogo pin approach. The only thing I'm worried of however, the kernel might disable OTG while it charges via pogo, or perhaps disable charging while OTG is enabled. I guess in this case, we would need a modified kernel to achieve simultaneous OTG and charging.
Here is a link to one of the first Nexus 10 pogo charger cables and it makes this claim:
"You still can power Nexus 10 while the USB port is otherwise occupied for data uses. It is fun & convenient to have MagNector to free up the USB port and charge faster."
http://www.ebay.com/itm/MagNector-N...ader_Chargers_Sync_Cables&hash=item20ce4990a6
So if that statement is true than the answer to your question is Yes.
eBay item is no longer available..
However, I know how sellers often make unfounded claims like that. So while it's probably a good sign, I am not convinced it's true. If anyone is fortunate enough to have a pogo charger, could you test it out with a otg cable and let us know the results?
Or if you're a kernel hacker, maybe take a look at the kernel source code and tell me what you think?
Also if anyone has a link where I could read about pogo pins for the N10, I'd like to read it. I'm interested in trying to make one, if they don't make any low-cost ones in the near future.
:bump:
mvmacd said:
eBay item is no longer available..
However, I know how sellers often make unfounded claims like that. So while it's probably a good sign, I am not convinced it's true. If anyone is fortunate enough to have a pogo charger, could you test it out with a otg cable and let us know the results?
Or if you're a kernel hacker, maybe take a look at the kernel source code and tell me what you think?
Also if anyone has a link where I could read about pogo pins for the N10, I'd like to read it. I'm interested in trying to make one, if they don't make any low-cost ones in the near future.
Click to expand...
Click to collapse
The answer to the question is ye, you can charge and use otg. Btw, http://pogocable.com/ 20$ isn't a bad price...
lKBZl said:
The answer to the question is ye, you can charge and use otg. Btw, http://pogocable.com/ 20$ isn't a bad price...
Click to expand...
Click to collapse
Just wondering, have you actually tried it yet? I remember on the n7 it would disable pogo charging when you plugged in otg. I hope n10 is different.
Swiped from my Nexus 10 using xda-developers app
I got the pogo cable in today. I plugged the usb-otg cable into the Nexus 10 with a thumbdrive connected to it. Stickmount recognized the thumbdrive and I can read/write to it. I noticed that the battery runs down while the otg is plugged in though. Running Paranoidandroid 2.99 with whatever kernel comes with that.
bd177 said:
I got the pogo cable in today. I plugged the usb-otg cable into the Nexus 10 with a thumbdrive connected to it. Stickmount recognized the thumbdrive and I can read/write to it. I noticed that the battery runs down while the otg is plugged in though. Running Paranoidandroid 2.99 with whatever kernel comes with that.
Click to expand...
Click to collapse
Does it say "Charging (USB)" or "Charging (AC)" in Settings > Battery?
mvmacd said:
Does it say "Charging (USB)" or "Charging (AC)" in Settings > Battery?
Click to expand...
Click to collapse
It says "Charging (AC)"
I know it's not the original question, but it looks like that would be possible with a modified OTG USB cable. Sounds like you already have something similar.
I was thinking about this for using my n10 for larger video recording when away from wifi. Just need to hook a battery up to the OTG while its plugged into the thumb drive. It takes a charge off my laptop when connected via the otg usb, so it should work as well with the correct setup voltage/wiring .
I would also like to know the pin designation for the pogo plug. If you can do the same setup as the one above, with the pogo... There would be less chance of damage to the tablet on the go......
metaled222 said:
I know it's not the original question, but it looks like that would be possible with a modified OTG USB cable. Sounds like you already have something similar.
I was thinking about this for using my n10 for larger video recording when away from wifi. Just need to hook a battery up to the OTG while its plugged into the thumb drive. It takes a charge off my laptop when connected via the otg usb, so it should work as well with the correct setup voltage/wiring .
I would also like to know the pin designation for the pogo plug. If you can do the same setup as the one above, with the pogo... There would be less chance of damage to the tablet on the go......
Click to expand...
Click to collapse
I know a nonstandard OTG cable [a OTG charging cable, basically the same as a regular one, except it has female USB only connected to the charging pins] and a modded kernel allowed for simultaneous OTG + charge on the Nexus 7, but I'd rather not have to deal with that, as getting a separate pogo charger seems like a better option.
mvmacd said:
I know a nonstandard OTG cable [a OTG charging cable, basically the same as a regular one, except it has female USB only connected to the charging pins] and a modded kernel allowed for simultaneous OTG + charge on the Nexus 7, but I'd rather not have to deal with that, as getting a separate pogo charger seems like a better option.
Click to expand...
Click to collapse
It has to be a moded kernel to access the data in read/write mode? Nothing to do with charging, and correct?
What I was considering is a battery/usb hub combo. One that plugs into the micro usb port and the battery actually has a female usb port for the thumb drive (need root to write to the drive, but not to stream from it). Amazon carries lots of external batteries with micro usb connection and the female usb port.
I agree, the pogo would be much simpler and still allow data through the micro usb.
The pogo would be much better for portability for this type of use especially if it allows for faster charging. If no one has the pin layout, guess I'll wait to get mine and test them myself. 6 pins on the n10 itself so it's not a standard usb pin setup?
metaled222 said:
It has to be a moded kernel to access the data in read/write mode? Nothing to do with charging, and correct?
What I was considering is a battery/usb hub combo. One that plugs into the micro usb port and the battery actually has a female usb port for the thumb drive (need root to write to the drive, but not to stream from it). Amazon carries lots of external batteries with micro usb connection and the female usb port.
I agree, the pogo would be much simpler and still allow data through the micro usb.
The pogo would be much better for portability for this type of use especially if it allows for faster charging. If no one has the pin layout, guess I'll wait to get mine and test them myself. 6 pins on the n10 itself so it's not a standard usb pin setup?
Click to expand...
Click to collapse
No, on the Nexus 7, if you plug in a OTG cable [which basically grounds a certain pin, the only difference between micro OTG and micro to full size USB adapter], it disables charging through power pins, because it needs to send power to OTG device, for example, a flash drive. It needs +5V power.
So the kernel mod was to disable the output of power, so that it could instead receive power and charge, from the charger. [The charger also 100% powering the OTG device]
Even if you have an externally powered hard drive, it needs power to turn on, even if it uses a wall adapter for the actual power to run the device.
Here is the kernel I was talking about: http://mehrvarz.github.com/usb-host-mode-power-management-nexus7/
it was made by a rootzwiki user. some discussion here: http://forum.xda-developers.com/showthread.php?t=1934722
Check the images of the USB hub on the 1st link.
Just for the heck of it I plugged a USB cable connected to my PC into the Nexus 10 while the pogo was also connected. The Nexus 10 showed up on the PC as it normally does in the file explorer and I can transfer files back and forth as usual. I went to Settings -> Battery on the Nexus 10 and it showed "Charging AC". I then unplugged the pogo cable and the status changed to "Charging USB". Plugged the pogo back in and the status switched back to "Charging AC". Then to make sure the pogo was actually doing the charging, I watched 2 hours of Netflix with the screen set to full brightness. The battery went down only 2%, so I'm pretty sure the pogo was doing the charging.
Sv: [Q] Pogo pins and OTG question [simultaneous charge & OTG?]
Thanks for your test. However with Nexus 10 connected to pc it is not in otg/host mode. You need to connect for example an usb memory with a otg cable to test if charging work with host mode enabled. There seems to be some discussions going on claiming pogo charging is disabled in host mode on Nexus 10 as well. It would be really really stupid if that's the case and I can't for the world figure out how they could put this limitation in the kernel.
Skickat från min HTC Desire via Tapatalk 2
Johan1976 said:
Thanks for your test. However with Nexus 10 connected to pc it is not in otg/host mode. You need to connect for example an usb memory with a otg cable to test if charging work with host mode enabled. There seems to be some discussions going on claiming pogo charging is disabled in host mode on Nexus 10 as well. It would be really really stupid if that's the case and I can't for the world figure out how they could put this limitation in the kernel.
Skickat från min HTC Desire via Tapatalk 2
Click to expand...
Click to collapse
Yes I tried that and the pogo would not charge.
EDIT: I bought a couple of OTG Y-cables on ebay (1 male micro usb end, 1 female micro usb end and a female usb end) to play around with when I saw they had a fix for the Nexus 7. I tried one on my Nexus 7 (PA rom and Timur kernel), connecting the female usb to a powered usb hub that has 16gb sdhc card plugged into it. Then connected the female micro usb end to a spare micro usb charging cable and the other end of the charging cable to the usb hub. The male micro usb end gets connected to the Nexus 7. I fired up the Nexus 7 while in the Asus pogo dock I bought for it and it charges the Nexus 7 while also allowing the OTG connection. I tried the same setup with my Nexus 10 (PA Rom, Ktoonez kernel) and pogo cable and it worked. The Nexus 10 charges through the pogo cable while the OTG works also. With the usb hub I'm using with the Nexus 10, I had to plug the charging cable into a charger wall wart. I don't think the old hub was putting out enough power to power the usb device. I let them both run over a day like this. Ran some RomToolBox app backups on both them and they both are charging on the pogo pins while doing so. If you go to system settings -> battery it shows "Charging AC" on both.
The galaxy nexus already has a custom kernel that supports OTG + charging (via a y-cable):
http://forum.xda-developers.com/showthread.php?t=1835720
In that thread (and the link in the OP there) there are discussions about porting that kernel to the nexus 7. Also, this modified kernel is (currently) for 4.1.2. Unfortunately I am not smart enough to do this myself (especially we are now dealing with the pogo cable and the USB); I do hope to let everyone -- especially the developers! -- knows about the possibility in view of the gnex kernel.
Is this an issue only with Disk Media over OTG, or is it with anything (controllers, etc.) over OTG?
If anyone is interested read my edit a couple of posts up.
Sv: [Q] Pogo pins and OTG question [simultaneous charge & OTG?]
It says AC charging even though it's not actually charging. Confirm this with for example battery monitor widget.
Skickat från min HTC Desire via Tapatalk 2

Categories

Resources