No notification pops up, my phone just doesnt seem to recognize the cable. Any reason? I was told the xoom camera kit cable would work for otg usb.
hello? can somebody help?
nobody? okay...coool
You'll need external power to power it
Sent from my GT-I9100 using XDA Premium App
its a pendrive, which should work unplugged. It just doesnt seem to even recognize that its there. Do you think the cable is defective?
In the usb otg tutorial video in the accessories section it shows that plugging in the cable without anything attached to it should trigger a notification. If it doesn't, it's probably the cable
Sent from my GT-I9100 using Tapatalk
okay, I guess the motorola xoom cable does not work for some stupid reason. Or its defective...well ****.
I guess, it's missing a resistor to trigger OTG mode.
Sent from my GT-I9100 using XDA App
in this thread (http://forum.xda-developers.com/showthread.php?t=1092493&highlight=usb+otg+resistor) you'll find detailed instructions on what makes one cable work and another one fail. apparently, you'd have to open the micro usb plug and connect pin 4 and 5. the connection between pin 4 and 5 determine, what kind of connection it is: charging, sync, usb otg, mhl, trigger download mode... and indeed, that is done by putting in different resistor strengths.
I got one of these, only £2.50 shipped and works perfectly, its great fun plugging in a mouse!
It seams that the change to the MHL cable is to allow USB on Go with the same cable
http://www.gottabemobile.com/2012/06/29/galaxy-s-iii-new-mhl-connector-also-enables-usb-on-go/
Mr_Maz said:
It seams that the change to the MHL cable is to allow USB on Go with the same cable
http://www.gottabemobile.com/2012/06/29/galaxy-s-iii-new-mhl-connector-also-enables-usb-on-go/
Click to expand...
Click to collapse
I had a bunch this was the case! Thanks for confirming.
Sent from my GT-I9300 using xda app-developers app
But how would one plug a usb cable into the hdmi port?
The_Biz said:
But how would one plug a usb cable into the hdmi port?
Click to expand...
Click to collapse
there is a MHL adapter that gives you a male 11 pin micro USB to female HDMI so you can just plug a standard male to male HDMI cable from adapter to TV.
see:
Samsung Galaxy S III MHL to HDMI adapter
Does anyone know if this new adapter will work with the Galaxy Nexus, as well? Also, does it charge the phone--or at least keep it from being drained--when USB OTG is being used? I've been looking for a way to use USB OTG with a flash drive on my GN while also charging/powering the phone. USB OTG is a real power hog.
It should, but on mine it doesn't.
I've got a new MHL cable and a USB OTG cable in the hope I could plug my MHL into the SGS3, use a powered USB hub connected to the Micro USB on the MHL and then connect a keyboard and mouse into the USB hub, then connect the HDMI to the TV.
For me it doesn't work. I thought this was the whole reason they changed the MHL cable to the new type. Can anyone else confirm?
Logicalstep
can we get an update on this situation here? How
can we get MHL AND USB OTG?
My reading of the link is that the micro USB port has been repinned to provide USB on the go and not that the cable allows for this.On the mhl cable there is a female HDMI port and a micro USB ( both female) which must be used by the charger.
If the usb connection is also female type, we have to use a usb otg cable to get it work. But at the moment my phone also wont recognize any devices -.-' only mhl and nothing else.
I bought this adapter for 25 euros and want to have it working.
I also asked samsung on facebook 'bout this problem, and everything the told me:
Go support site...
very helpful.
I hope the will enable this feature in a future update.
Hi there. Recently got nexus 7 there and I was not going to root or mess with it but the lack of otg cables around my area is
Doing my head in. But on my HTC one s I have a mental installed by a dev called zarboz. He got the standard USB cable that goes from the charger to the device working as an otg cable. Without having to buy a proper otg cable.
is there a kernel that supports this. I have been looking but have not found anything on it.
snwman said:
Hi there. Recently got nexus 7 there and I was not going to root or mess with it but the lack of otg cables around my area is
Doing my head in. But on my HTC one s I have a mental installed by a dev called zarboz. He got the standard USB cable that goes from the charger to the device working as an otg cable. Without having to buy a proper otg cable.
is there a kernel that supports this. I have been looking but have not found anything on it.
Click to expand...
Click to collapse
All kernels support otg. Even the stock. Some dont have automount for external drives, but I have yet to find one that didnt accept a kb or mouse immediately. Now, otg plus host mode charging is a different story.
Sent from my Nexus 7 using xda premium
Hi.
I have a otg cable and USB storage device and I can't use it on my s4 , when plugging in the otg it says USB connector connected. But when I connect an USB drive to it it says nothing and I can't get in the otg. It worked on my note 2 but people say the problem is the mhl 2.0 but the note 2 has the same mhl 2.0
Please help me.
Sent from my GT-I9505 using xda app-developers app
I don't understand what is this detectable otg cable you are talking about. I have simple cheap converter from microusb to normal usb. This converter is not detected by itself by the phone. I just use it to plug pendrive to phone's microusb and everything works. GT-I9505
I have my NP coming next week! Now I need to know what I should order to go with it. Should I get a USB hub for it? Can I use the Logitech k400 if I wanted? Can I plug a 1TB HDD in somehow to play my movies? My computer recently died so my plex server is down :/
I'd like to change ROMs on the device too.. So please advise. Thank you!
Sent from my Nexus 7 using XDA Free mobile app
Get an adapter cable from micro USB to USB female. Then get a powered USB hub - the passive ones probably won't be able to drive your HDD.
With Kodi, you won't need the PC-based server!
Lots of choices for a Bluetooth keyboard/mouse. I use my Logitech diNovo Mini.
I would recommend the Inateck HB4003 Gigabit Ethernet & 3 Port USB 3.0 Hub. It has the micro usb adapter built into it as well as an ethernet port & a hub. If you want to use your TV remote instead of the nexus player, I would recommend getting a FLIRC usb adapter as well.
Thanks for the ideas! I'm really pumped lol.. Kodi sounds like a perfect fit for me. Are there any restrictions on hard drive size that can be connected?
Sent from my SCH-I535 using XDA Free mobile app
xaudiblex said:
I would recommend the Inateck HB4003 Gigabit Ethernet & 3 Port USB 3.0 Hub. It has the micro usb adapter built into it as well as an ethernet port & a hub. If you want to use your TV remote instead of the nexus player, I would recommend getting a FLIRC usb adapter as well.
Click to expand...
Click to collapse
One thing I noticed with the HB4003 it looks like a regular USB end not a micro and the cable doesn't detach. Where you saying get that and the micro USB to USB female adapter? Thanks!
Sent from my SCH-I535 using XDA Free mobile app
talk2nate said:
One thing I noticed with the HB4003 it looks like a regular USB end not a micro and the cable doesn't detach. Where you saying get that and the micro USB to USB female adapter? Thanks!
Sent from my SCH-I535 using XDA Free mobile app
Click to expand...
Click to collapse
My mistake, you are right. Its has been so long ago since I put together my setup. I forgot that I also have a HooToo (HT-CT01) Micro USB OTG + 4 port charging hub as part of my setup (used to charge my cell phone, tablet, & game controllers). You will need a micro usb OTG cable if you go with the HB4003.
Regardless of which OTG cable you go with, make sure that it is a straight cable for OTG. If the otg device is a right/left angle cable or a short adapter, it won't work because of how scrunched the cables are.
xaudiblex said:
My mistake, you are right. Its has been so long ago since I put together my setup. I forgot that I also have a HooToo (HT-CT01) Micro USB OTG + 4 port charging hub as part of my setup (used to charge my cell phone, tablet, & game controllers). You will need a micro usb OTG cable if you go with the HB4003.
Regardless of which OTG cable you go with, make sure that it is a straight cable for OTG. If the otg device is a right/left angle cable or a short adapter, it won't work because of how scrunched the cables are.
Click to expand...
Click to collapse
Thank you for replying! I'll order an OTG cable and the adapter you suggested. It not being powered isn't going to be an issue you think?
Sent from my SCH-I535 using XDA Free mobile app
talk2nate said:
Thank you for replying! I'll order an OTG cable and the adapter you suggested. It not being powered isn't going to be an issue you think?
Sent from my SCH-I535 using XDA Free mobile app
Click to expand...
Click to collapse
I've been thinking about this, and in this case it's better to get a powered usb hub, and plug a usb-ethernet adapter into that hub.
talk2nate said:
It not being powered isn't going to be an issue you think?
Click to expand...
Click to collapse
For me, it hasn't been an issue that the HB4003 is not powered. Then again, all I have connected is a FLIRC adapter, mini usb receiver for my Lenovo N9502 keyboard/mouse, & a thumb drive.
kenkiller said:
I've been thinking about this, and in this case it's better to get a powered usb hub, and plug a usb-ethernet adapter into that hub.
Click to expand...
Click to collapse
I chose the adapter to reduce clutter & reduce my millions of wire behind my TV. The way I see it, having one less USB connected device is one less thing to diagnose (I am always flashing roms & plugging & unplugging devices to the USB hub.
Hmm is this a viable option?
https://www.amazon.com/dp/B00KRY4YJW/ref=cm_sw_r_awd_Bzuyvb0FJ38VS
Sent from my Nexus 7 using XDA Free mobile app
xaudiblex said:
For me, it hasn't been an issue that the HB4003 is not powered. Then again, all I have connected is a FLIRC adapter, mini usb receiver for my Lenovo N9502 keyboard/mouse, & a thumb drive.
I chose the adapter to reduce clutter & reduce my millions of wire behind my TV. The way I see it, having one less USB connected device is one less thing to diagnose (I am always flashing roms & plugging & unplugging devices to the USB hub.
Click to expand...
Click to collapse
Yeah, but now having a ssd to increase userdata space is a valid method, it changes a limitation of the NP. For me personally I'll just hide away the clutter.
---------- Post added at 12:20 PM ---------- Previous post was at 12:19 PM ----------
talk2nate said:
Hmm is this a viable option?
https://www.amazon.com/dp/B00KRY4YJW/ref=cm_sw_r_awd_Bzuyvb0FJ38VS
Sent from my Nexus 7 using XDA Free mobile app
Click to expand...
Click to collapse
Sadly, no one can tell you for sure unless they've tried it.
talk2nate said:
Hmm is this a viable option?
Click to expand...
Click to collapse
This is what I have. Click here for my review on XDA. However, there is only 1 USB port that is connected to the OTG. The remaining 4 ports are for charging purposes only. If you need more than 1 USB port fort OTG purposes & possibly an ethernet port, I would get the HooToo and the Inateck.
The way mine is wired is:
Nexus player ---> Micro USB Cable (provided) ---> USB extension cable (OTG cable is short and wanted to hide the hub) ---> HooToo Hub (back HooToo USB OTG port) ---> Inateck Hub (Front of HooToo Hub)
xaudiblex said:
This is what I have. Click here for my review on XDA. However, there is only 1 USB port that is connected to the OTG. The remaining 4 ports are for charging purposes only. If you need more than 1 USB port fort OTG purposes & possibly an ethernet port, I would get the HooToo and the Inateck.
The way mine is wired is:
Nexus player ---> Micro USB Cable (provided) ---> USB extension cable (OTG cable is short and wanted to hide the hub) ---> HooToo Hub (back HooToo USB OTG port) ---> Inateck Hub (Front of HooToo Hub)
Click to expand...
Click to collapse
Hehe...that's your setup? How is that reducing clutter?
If anything, removing the HooToo hub is reducing clutter, unless you need more than the OTG ports on the Inateck hub.
So micro to USB female > inateck hub with Ethernet is probably the best choice then.. I just wish I know it'd push a 1TB HDD and a Logitech K400.. Thats all I'd hook up to it.
Sent from my SCH-I535 using XDA Free mobile app
talk2nate said:
So micro to USB female > inateck hub with Ethernet is probably the best choice then.. I just wish I know it'd push a 1TB HDD and a Logitech K400.. Thats all I'd hook up to it.
Sent from my SCH-I535 using XDA Free mobile app
Click to expand...
Click to collapse
Most probably not as the 1TB hdd will require a powered usb hub.
Unless it's one of those that has it's own power source.
kenkiller said:
Hehe...that's your setup? How is that reducing clutter?
Click to expand...
Click to collapse
There is a method to my madness! It makes more sense when you see my setup.
My setup:
1x Harmony Smart Hub (USB Powered)
1x Winegard LNA-200 Boost XT Digital HDTV Preamplifier (USB Powered)
2x Micro USB Cables (Charging Tablet & Phone)
The Hootoo hub allows me to charge/power all 4 devices using 1 power brick instead of 4 individual power bricks. Having a functioning OTG was icing on the cake.
talk2nate said:
So micro to USB female > inateck hub with Ethernet is probably the best choice then.. I just wish I know it'd push a 1TB HDD and a Logitech K400.
Click to expand...
Click to collapse
Yes, that sounds right (make sure it says OTG). Is your 1TB HDD self-powered or is it powered through the USB port? If it is self-powered, it should work. I just plugged up my spare 1TB Fantom Self-Powered (power brick) HDD to see if it works and it seems to be okay. If it is not self-powered, it may be ymmv.
I have two HDDs actually. Both 1TB but one was in my desktop and I'd just order a powered enclosure for and the other is a western digital mobile drive without power.
So I'm pretty sure I'll go micro otg > inateck> powered HDD and Logitech K400.. That's really all I can see I'd use really. My TV is on the other side of the room. So not like I'll be walking over there much.
I'm stoked!
Sent from my Nexus 7 using XDA Free mobile app
talk2nate said:
I have two HDDs actually. Both 1TB but one was in my desktop and I'd just order a powered enclosure for and the other is a western digital mobile drive without power.
So I'm pretty sure I'll go micro otg > inateck> powered HDD and Logitech K400.. That's really all I can see I'd use really. My TV is on the other side of the room. So not like I'll be walking over there much.
I'm stoked!
Sent from my Nexus 7 using XDA Free mobile app
Click to expand...
Click to collapse
Why not plug the hdd into your router? It'll be accessible everywhere, easier to add/delete files on it.
My router is an older N 300 Cisco.. Sadly I've got no USB support for something like that atm. I'm looking into a router upgrade though. But the one I have has worked well for about 2 years now.
talk2nate said:
My router is an older N 300 Cisco.. Sadly I've got no USB support for something like that atm. I'm looking into a router upgrade though. But the one I have has worked well for about 2 years now.
Click to expand...
Click to collapse
Certainly something to consider.
But seriously, if all you're going to put on that hdd is media, plugging it into your PC and sharing it works the same as plugging it into a router (only bad point is that your PC needs to be switched on for the hdd to be accessible). If you're going to be plugging/unplugging your hdd from your Nexus Player just to add files, it gets old pretty fast.