hi i installed CM10 aug 02 build from quarx last week .. Everything was fine ... but when i installed the latest Aug 04 build i am unable to install the battery fix and my battery is dead. Now if i want to charge from wall cable it shows a ? mark but it can still go into recovery. And if i try to charge using usb it will boot but its not at all holding the charge. I tried repeatedly to factory wipe and install the battery fix. Some how its not getting installed. Can somebody help me with this. I have seen similar threads but they were related to new batteries or chargers. In my case everything is from motorola.
waiting anxiously ...
Thanx in advance
Did you checked if the download was for Defy or Defy+(mb525 or mb526)?
Which Defy model did you have?
t0n0n said:
Did you checked if the download was for Defy or Defy+(mb525 or mb526)?
Which Defy model did you have?
Click to expand...
Click to collapse
I downloaded mb526 and i have Bayer device Defy
Flash the battery fix, you can find link in numerous threads. Quickly you can check in Auris thread for quarx ICS builds in general section.
Sent from my MB526 using xda app-developers app
premaca said:
Flash the battery fix, you can find link in numerous threads. Quickly you can check in Auris thread for quarx ICS builds in general section.
Sent from my MB526 using xda app-developers app
Click to expand...
Click to collapse
Now he can't, unless the phone is loading bootloader before showing the no batery error.
Can you confirm if your LED blinks blue before the mensage appears??
If Yes, press vol Down when the light appears and flash the Battery fix from Auris.
If No, I think you will have to flash a new SBF. You can try to flash the easy_recovery.sbf from m11kkaa. Use it to flash the battery fix and be happy .
To enter the easy recovery, you have to pull the battery off, wait 5 seconds, hold vol down + power, put the battery back. When the green android appears, press both vol up and vol down.
Have u got green or red lense?
my green lense works with every epsylon and quarx build without any special setting or apps like battery fix.
solved
Thanx guys for your replies.
I was able to enter the recovery . so i started experimenting with various builds. I installed epy's latest build over the same kernel without any battery fix and it started charging again. so i left it as it is without any change. Why breaking it when its working ..
i thank one and all for they replies. You guys rock
:good::good::good:
Related
Hi
I need help big time. I had CM 10 running on my defy no probs at all. I tried a stupid thing to back to a stock rom and now I cant get back to install CM 7 or CM10.
I even had my battery die during the process and had to do the Mcgyver trick and it worked. I live in the UK and tried the british retail and vodafone roms and both caused the defy to die and not respond / power up, anything..
The only rom I have found so far to work is JORDN_U3_97.21.51.sbf. it works,. Then I can install 2nd init and root with Super one click. Though after I do that and try to install CM7, 10 I just get black screen and white LED.
Help.
Can someone walk me through the process again and provide links to files
Many thanks in advance
chris
Make sure that when you flash cm7, you flash the one for you kernel(froyo or gb). Also wipe data after flashing.
Sent from my MB526 using xda premium
You can try THIS. Another user had the same problem as you and he got his defy running after following that guide.
stefa_vr6 you are a GENIUS
stefa_vr6 said:
You can try THIS. Another user had the same problem as you and he got his defy running after following that guide.
Click to expand...
Click to collapse
:good:
stefa_vr6 you sir are a genius. This was exactly what I wanted. I flashed the rom in your post, rooted and installed 2nd init and fom there flashed CM10. So now up and running again.
Have a case of virtual beer on me sir.
My only other problem is now that I probably need a new battery as I had to do the battery hack as my phone died during an earlier update and is displaying " ?" in the battery display.
Thanks again
chris
If you have the Unknown Battery Status when you used Battd update from Quarx, the Solution are simple.
1. Restart The Phone
2. Enter Recovery Mode
3. Install Zip From SD Card
4. Use Any File who match With your Battery (1500, 1600 or 1700mAh)
5. Reboot the Phone and Enjoy it!
PD: Sorry for my Bad English
THANKS A LOOOT, finally I can use my Defy , it wasn´t charging and in the BootMenu was showing 10% and now it is solved :fingers-crossed: Thanks again :good:
Thanks To U
GiulioPasini said:
THANKS A LOOOT, finally I can use my Defy , it wasn´t charging and in the BootMenu was showing 10% and now it is solved :fingers-crossed: Thanks again :good:
Click to expand...
Click to collapse
Now tell the good news to ur friends.
Which?
I have a Defy Red Lense (NOT PLUS), and i have buyed for it a Mugen Power Battery of 1700 Mah... but Battery Widget shows that his capacity is 1500 Mah, and i am confused
And, i don' t know which of your Battery zip i need to download. Help me.
Fix for 1700mAh
remix96 said:
I have a Defy Red Lense (NOT PLUS), and i have buyed for it a Mugen Power Battery of 1700 Mah... but Battery Widget shows that his capacity is 1500 Mah, and i am confused
And, i don' t know which of your Battery zip i need to download. Help me.
Click to expand...
Click to collapse
Hi Use thes File 1700mAh in CWM
Jecaros said:
Hi Use thes File 1700mAh in CWM
Click to expand...
Click to collapse
Thanks, i' m going to try it on Thuesday and report a feedback to you
Did not help with my MB525 (Green lens version, Original kernel Froyo 2.2.2).
Still battery status Unknown. Also "1700MaH.zip" is not installable.
Only For MB525&MB526
olaviivalo said:
Did not help with my MB535 (Green lens version, Original kernel Froyo 2.2.2).
Still battery status Unknown. Also "1700MaH.zip" is not installable.
Click to expand...
Click to collapse
Hi remember this fix only works with Motorola Defy(+) Model MB525 and 526.
Jecaros said:
Hi remember this fix only works with Motorola Defy(+) Model MB525 and 526.
Click to expand...
Click to collapse
Sorry, typing error. It is still Defy MB525 and not MB535
Try This 1700mAh
olaviivalo said:
Sorry, typing error. It is still Defy MB525 and not MB535
Click to expand...
Click to collapse
Hi Olaviivalo, Install this ZIP file in CMW.
If I buy a defy+ battery for my defy....should it works fine with 1700mah.zip?
Sent from my Defy CMX quarxed
kryptonitiko said:
If I buy a defy+ battery for my defy....should it works fine with 1700mah.zip?
Sent from my Defy CMX quarxed
Click to expand...
Click to collapse
Use only the Zip According to Your Defy Battery. In the Battery label says what is the capacity, for example if you have a Stock battery for DEFY not + use 1500mAh ZIP.
But if you buy an 1700mAh Battery Use the zip according to this battery.
I have defy + battery ,lithium polymer HF5X 1700mah and wont charge 100%, loaded only up to 84%. I use Defy with rom froyo 2.2,what do you recommend?!
walter79 Solution
inmorthex said:
I have defy + battery ,lithium polymer HF5X 1700mah and wont charge 100%, loaded only up to 84%. I use Defy with rom froyo 2.2,what do you recommend?!
Click to expand...
Click to collapse
Hi inmorthex, this is the solution by walter79, go to his post Here i hope this fix works for you.
Jecaros said:
If you have the Unknown Battery Status when you used Battd update from Quarx, the Solution are simple.
1. Restart The Phone
2. Enter Recovery Mode
3. Install Zip From SD Card
4. Use Any File who match With your Battery (1500, 1600 or 1700mAh)
5. Reboot the Phone and Enjoy it!
PD: Sorry for my Bad English
Click to expand...
Click to collapse
I tried installing both, the 1500 and the Red Lens fixes, but none of them worked. What can I do? Please help!
Defy+ ME525 Now is MB526?? battery issue
Hi to all debs i have been trying to figured it out.-- my moto defy+ ME525 now is MB526 -- i was thinking that could be a BL7 and it came with the BL6 so now my phone thinks it is a MB526 well i have change many roms.. i tested the Mint rom for defy its shows MB526 good rom nice smooth..but battery unknown (what is this issue) also i tried the Jelly Mokee-- another issue with that rom its showing internal memory full..or no info.??
well can i get some answers about this issue.. right now i have the correct rom its SlimJelly Freaking awesome smooth not lags.. but i still get the battery unknown is there anyone that fixed this issue... please help....
Pls help.......even d most silliest suggestions welcome
See this screenshot.........i am charging my cell and it is showing also its charging but not even d graph nor the battery icon is increasing .
Seriously help me
I am not even understanding what shall we call this problem/....
abhinavvaidya90 said:
See this screenshot.........i am charging my cell and it is showing also its charging but not even d graph nor the battery icon is increasing .
Seriously help me
I am not even understanding what shall we call this problem/....
Click to expand...
Click to collapse
Looks like you need a new battery. Try clearing batterystats.
Sent from my Nexus 7 using Tapatalk
hotdog125 said:
Looks like you need a new battery. Try clearing batterystats.
Sent from my Nexus 7 using Tapatalk
Click to expand...
Click to collapse
how ??
abhinavvaidya90 said:
how ??
Click to expand...
Click to collapse
Battery stats wiper from market.
Sent from my NexusHD2 using xda app-developers app
I am running CM10 latest Quarx build on my Defy+ with bl7 after installing the update, menu button light is not working :crying: Is there any way to get it back I tried rolling it back to the CM7 but no use. Any help is really appreciated. Sorry for my bad English...!!
I have the same problem, and the exact same button
I think the led behind that button is not working anymore...
Try to install the CM as indicated in the topics (respect the steps). Do it from begining carefully (flash the stock ROM).
Same here
Sent from my MB526 using xda app-developers app
Started from the scratch by flashing SBF-->> rooting--->> Installed Cm7 (Quarx build) But still no luck...!!! :crying: Back to Awesome Cm10 by Quarx
hacktheheaven said:
Started from the scratch by flashing SBF-->> rooting--->> Installed Cm7 (Quarx build) But still no luck...!!! :crying: Back to Awesome Cm10 by Quarx
Click to expand...
Click to collapse
If I understood right you wanna install CM7.2. For that to work is good that after flashing stock ROM and installing 2ndinit to reboot and from stable recovery to format data/cache and dalvik on ext3 followed by flashing custom CM7.2 (I suggest you to try another CM7.2 mod).
Thanx for the reply
pgreed said:
If I understood right you wanna install CM7.2. For that to work is good that after flashing stock ROM and installing 2ndinit to reboot and from stable recovery to format data/cache and dalvik on ext3 followed by flashing custom CM7.2 (I suggest you to try another CM7.2 mod).
Click to expand...
Click to collapse
My actual problem is not with the Rom. Menu button light stopped glowing right after shifting from cm7 to cm10 :crying: Sorry for my bad English.
hacktheheaven said:
My actual problem is not with the Rom. Menu button light stopped glowing right after shifting from cm7 to cm10 :crying: Sorry for my bad English.
Click to expand...
Click to collapse
I think the high brightness settings would have burned it
Then there is no way to get it back......!! Wish I didn't mess with that settings....
Sent from my MB526 using xda app-developers app
hacktheheaven said:
Wish I didn't mess with that settings....
Click to expand...
Click to collapse
I didn't messed with buttons lights, and still got 3 burned LEDs. The first to go was "search". A month after that, the "menu" button went dark. Now the "back" is gone too. Just "home" remains with light. I don't think it's a software issue... More likely a project flaw or bad manufacturing (I still use CM7, no tweaks).
Last week I also got a "stain" (a lot of bad pixels) on the center of the screen. Just turned the phone off and put it in the freezer for 12 hours. After that, it was new again (lucky me). Yeah, the famous trick works folks (unfortunally, not for the capacitive LEDs though).
Floripa said:
I don't think it's a software issue... More likely a project flaw or bad manufacturing
Click to expand...
Click to collapse
I'm inclined to agree. It seems fairly common. My menu button LED failed when my Defy+ was around 6 months old and completely stock. I put it down to a hardware failure.
Time for me to claim the Warranty
I will unroot the device and will claim the warranty...!! :good: But only problem is I have to wait untill the device returns back and have to use that ****sung again sorry Typo Samsung* :crying:
Hi all,
I got a problem when i m tryin to charge my phone.
When is on i got no problem to charge it but when is power off
I can t charge it.when i plug the cable , i feel an vibration the screen turn on , i can see batterie logo in the middle of the screen for 5 secondes max and it turn off .
If any body got yhe same problem.
Thx.
Galaxy note 3.
Recovery custom: twrp
Rom: cyanogenmod 12.1
Band version:n9005xxugng1
mrvegas06 said:
Hi all,
I got a problem when i m tryin to charge my phone.
When is on i got no problem to charge it but when is power off
I can t charge it.when i plug the cable , i feel an vibration the screen turn on , i can see batterie logo in the middle of the screen for 5 secondes max and it turn off .
If any body got yhe same problem.
Thx.
Galaxy note 3.
Recovery custom: twrp
Rom: cyanogenmod 12.1
Band version:n9005xxugng1
Click to expand...
Click to collapse
try to flash original recovery
boyrobbie said:
try to flash original recovery
Click to expand...
Click to collapse
Thanks for answer but This problem come from the kernel i guess, i tried to flash cm11 and it s works great, i got green logo on screen .if somebody have any solution about that , patch or another kernel or something else to fix the problem.
I got the latest cm12.1 and i would like to keep it.
Thanks
No answer?? Anybody got the same problem.
Sad , very sad.
mrvegas06 said:
No answer?? Anybody got the same problem.
Sad , very sad.
Click to expand...
Click to collapse
Are you SURE it is not charging? The logo goes off but the phone normally keeps charging.
Which kernel are you on?
Journyman16 said:
Are you SURE it is not charging? The logo goes off but the phone normally keeps charging.
Which kernel are you on?
Click to expand...
Click to collapse
I m using original cyanogenmod kernel and i got this problem since cm12.i never tweak or use any other kernel.
Working fine on cm11(4.4.4).i tried to speak with an cyanogen dev but no success.
Thank for the answer.
mrvegas06 said:
I m using original cyanogenmod kernel and i got this problem since cm12.i never tweak or use any other kernel.
Working fine on cm11(4.4.4).i tried to speak with an cyanogen dev but no success.
Thank for the answer.
Click to expand...
Click to collapse
I just tried it on mine with battery at 96%. Turn phone off, connect power and I get a battery logo for about 4 secs then nothing. I waited 15 minutes and on start up my battery was at 100% - so it doesn't LOOK like anything is happening but it definitely charged while off.
Phone is not booting up..Don't know why ...was using CM12.1 with twrp custom recovery.last time seen was 20% battery after that suddenly switched off automatically.Now even after plugged in to charge ,it's showing nothing.Any solution plz.
Let it charge for 10 minutes and then press the power button
yeah..i did it but that was not working....... recently just booted up by pressing power button and volume down button....dont know what happened ,but it was like dead for hour one or two.......
anks095 said:
yeah..i did it but that was not working....... recently just booted up by pressing power button and volume down button....dont know what happened ,but it was like dead for hour one or two.......
Click to expand...
Click to collapse
Now it booted and working fine?
You should have posted this in the cm12.1 thread instead of creating a new thread.
Sent from my XT1562 using Tapatalk
K.khiladi said:
Now it booted and working fine?
You should have posted this in the cm12.1 thread instead of creating a new thread.
Sent from my XT1562 using Tapatalk
Click to expand...
Click to collapse
yeah...now it's working fine.
and yes,it feels like that though the I dont know what was problem or what was the cause of the problem as I have used that cm 12.1 ROM and it had no problem so far.And heading was for troubleshooting so I posted it here .