Related
it would be very helpfull to have a list of those roms which does not need a pc to flash. i am requesting all bosses to provide the list in this thread. thanks
nitol said:
it would be very helpfull to have a list of those roms which does not need a pc to flash. i am requesting all bosses to provide the list in this thread. thanks
Click to expand...
Click to collapse
All roms can be flashed this way mate, just use USPL or HSPL and use storage card method to flash
thanks for your reply boss, but my one is 1.56 olinex(once i've done it). i am using xt grid evo.
now i am trying to change my rom but i can't.
i have puted several roms(cloudy,xtgrid leo,nrg,goldlocke) in the root of my storage card and hard format my phone but my ph is not flashing with the new rom.
can any boss help me please?
i want to get rid of this trouble as soon as possible.i don't want to use any pc to flash.
what are the steps to get rid?
nitol said:
thanks for your reply boss, but my one is 1.56 olinex(once i've done it). i am using xt grid evo.
now i am trying to change my rom but i can't.
i have puted several roms(cloudy,xtgrid leo,nrg,goldlocke) in the root of my storage card and hard format my phone but my ph is not flashing with the new rom.
can any boss help me please?
i want to get rid of this trouble as soon as possible.i don't want to use any pc to flash.
what are the steps to get rid?
Click to expand...
Click to collapse
Personal experience is that any SD card larger than 2gb will not instal new Rom's
Cards smaller than 2gb work fine.
Yours may be different but try and see. If you do not have a small SD card they are very cheap these days mate
thanks for your suggesion boss. i've tryed as you said,used an one gb sd card.but the result is same.what to do now? i need help.please somebody give me a solution.
thanks
May I ask why you don't try pc method?
sure sir,my pc is disturbing,not only that,most of the time i used to brouse through my phone because due to my business i can't find enough time to sit infront of my pc.that's why i need help about storage card method.
nitol said:
it would be very helpfull to have a list of those roms which does not need a pc to flash. i am requesting all bosses to provide the list in this thread. thanks
Click to expand...
Click to collapse
as mentioned, ALL ROMs are capable of being flashed to a phone through SD Card. But since you are a new member, you might need to think of these:
1. did you have the correct filename of the nbh file inside your card?
it should be "BLACIMG.nbh" and must be placed at the root of your card.
2. do you know how to go to the bootloader mode(tri-color screen)?
phone off --> hold "voldown" and short press "power" button
it MUST be working.
thanks for your rep. sir, offcourse i know how to do that,i've tested most of the roms till april'10.last 3months i did not try any.but from till last few days i am trying to change my rom and non of them are working. i am using "xt grid evo", my redio is latest,i am taking rom into the root of my sd card,i am hard formating. but nothing works.
i don't know why,nobody knows why...
You have to rename the ROM image to "BLACIMG" before putting it onto your SD card. I use an 8GB card and have never had a problem.
alchopop said:
Personal experience is that any SD card larger than 2gb will not instal new Rom's
Cards smaller than 2gb work fine.
Yours may be different but try and see. If you do not have a small SD card they are very cheap these days mate
Click to expand...
Click to collapse
i have 4gb card and have room and i can flash new rom
gagi75 said:
i have 4gb card and have room and i can flash new rom
Click to expand...
Click to collapse
Like I said, your experience may be different. My 8gb card WON'T workm my 2gb card does work. Go figure
alchopop said:
Like I said, your experience may be different. My 8gb card WON'T workm my 2gb card does work. Go figure
Click to expand...
Click to collapse
i think you have to format youre 8gb sd card to fat 32
i also use a 8 gb card without any problems AFTER i formatted it
miniterror said:
i think you have to format youre 8gb sd card to fat 32
i also use a 8 gb card without any problems AFTER i formatted it
Click to expand...
Click to collapse
I think i have a dodgy card because every time i try to use it on my pc it ask's to check for errors. I have done that several times, copied everything to and from the PC to format it and it still has problems. It works OK in the phone though so I just accept the status quo and flash from the smaller card. Going to upgrade soon so will probably get a new SD card then and see if my experience changes after that. Thanks for your help though
hey hey hey what about my problem? i'm still stucked,can't flash any rom in sd card method. i always download them from my ph. rename BLACIMG.NBH,hard format but no result.my one is 16 gb. i've tryed on 1gb also but not working.
should i rename it through my pc?then copy to my sd card and hard format?
WHAT IS MY SOLUTION SIR?
nitol said:
hey hey hey what about my problem? i'm still stucked,can't flash any rom in sd card method. i always download them from my ph. rename BLACIMG.NBH,hard format but no result.my one is 16 gb. i've tryed on 1gb also but not working.
should i rename it through my pc?then copy to my sd card and hard format?
WHAT IS MY SOLUTION SIR?
Click to expand...
Click to collapse
It should be renamed "BLACIMG.nbh" NOT "BLACIMG.NBH"
Note LARGE caps AND small caps
When you reboot the phone hold down the Volume down button until the bootloader shows then wait till it reads the card. Then press power button and it will start ti flash the new ROM
Good luck
sir,i know about cap & small matter. acutally i rename "BLACIMG.nbh" but not working....
nitol said:
sir,i know about cap & small matter. acutally i rename "BLACIMG.nbh" but not working....
Click to expand...
Click to collapse
All i can suggest then is try a new card mate. Like i said before, I have a card that does work and a card that won't work
i've also tryed in a 1gb card sir.anyway,no solution for my problem, bosses can close this thread.
thanks to all
for 1st time i hear someone to have problem flashing because of the SD card!
From 2 years i flash only from the SD card and im with the default 8GB Sandisk that comes with the Phone when i bought it.
So like already many peoples say the answer is
ALL Roms can be flashed with the SD Card methood
Hello all, I need your help. I'm using dell Streak 5. The phone factory resets by itself, I know that the problem is bad internal SD card, I have some skills for opening phones, and replacing internal parts, so this is no problem for me, but still I need your help. I have several questions:
-Can I put micro SD 2GB or 4GB(I know this is maximum, do not want to edit system files tu accept bigger card) Class 4?....becorse I live in small country, I can't find SD card's with bigger class.
-Which class is the original internal SD card from 2GB?
-And the must imortant question, after replacing the new and formated(in FAT32 I thing) micro SD card need something special to do, or just need to do factory resset and wait for the phone to create partitions on the micro sd card? I am asking this question because my phone is running on latest official Froyo ROM 2.2.2. Is it necessary to instal custom rom, or I can be able to change the inner SD card running on official Froyo, with only factory resset? The data on internal sd card is not important to me, I do not need a back up, I just want my phone to accept the new card, becorse I spent 400 euros for my beloved phone. Thank you very much!
You need to search. This has been covered.
I will tell you that the internal sd card is not formatted fat32 as it is used in the phone.
marvin02 said:
You need to search. This has been covered.
I will tell you that the internal sd card is not formatted fat32 as it is used in the phone.
Click to expand...
Click to collapse
Ok Thank you, I will replace my new internal sd card without formatting. I was searching everywhere and can't find someone that was replacing internal sd card on phone running on official 2.2.2 Froyo :S. I was found that on Streak with StreakDroid 1.9 Custom RoM is only necessary to do factory resset after replacing the new sd. I don't know if this procedure 'll work on my Streak with Official 2.2.2 ROM. So, can someone ansver me? Thanks .
Maybe Marvin02 or TheManii or someone more knowledgeable can step in but as long as you use a 2GB card, you'll be good with the stock ROM.
BUT this is the part Im not sure of, if you swap out for a 4GB card, then you do need to have installed StreakMod and StreakDroid, this is from personal experience. I changed mine out and had StreakDroid 1.9.0 installed. When I powered the phone up, it did all the work, I just had to wait.
Not sure if the same is true using a 4GB or larger card with stock ROM or any of the other custom ROMs
sdan87 said:
Hello all, I need your help. I'm using dell Streak 5. The phone factory resets by itself, I know that the problem is bad internal SD card, I have some skills for opening phones, and replacing internal parts, so this is no problem for me, but still I need your help. I have several questions:
-Can I put micro SD 2GB or 4GB(I know this is maximum, do not want to edit system files tu accept bigger card) Class 4?....becorse I live in small country, I can't find SD card's with bigger class.
-Which class is the original internal SD card from 2GB?
-And the must imortant question, after replacing the new and formated(in FAT32 I thing) micro SD card need something special to do, or just need to do factory resset and wait for the phone to create partitions on the micro sd card? I am asking this question because my phone is running on latest official Froyo ROM 2.2.2. Is it necessary to instal custom rom, or I can be able to change the inner SD card running on official Froyo, with only factory resset? The data on internal sd card is not important to me, I do not need a back up, I just want my phone to accept the new card, becorse I spent 400 euros for my beloved phone. Thank you very much!
Click to expand...
Click to collapse
Hi, I've replaced my original internal 2GB microSD class 2 to 4GB class 10 without any problem (i think Dell Streak will accept any class).
* Download 'QDLTool3rd_20101022_GAUSB1A130500' and unzip to folder on desktop (google 'QDLTool3rd_20101022_GAUSB1A130500').
* Power Dell Streak on the first time with inserted 4GB internal microsd card and wait until auto format is done and display error message come on.
* Power off Dell Streak by remove the battery and re-insert it back after 5 seconds.
* Plug-in USB Data cable into your computer
* Press and hold the volume up button then insert Data cable into the Dell Streak.
* Goto your QDLTool3rd folder on your desktop and execute QDLTool.exe file and select RUN option (should you get driver error then Google search, install and start again).
* On completion your Dell streak will boot into android 2.2 with old Baseband.
From here you can update latest Baseband and flash Steven 1.9 or 1.91 or in my case Simple Streak 1.3 Beta4.
Should you require help PM me. Also check out my previous post for photo of my Dell streak with inserted 4GB microSD, working.
cdzo72 said:
Maybe Marvin02 or TheManii or someone more knowledgeable can step in but as long as you use a 2GB card, you'll be good with the stock ROM.
BUT this is the part Im not sure of, if you swap out for a 4GB card, then you do need to have installed StreakMod and StreakDroid, this is from personal experience. I changed mine out and had StreakDroid 1.9.0 installed. When I powered the phone up, it did all the work, I just had to wait.
Not sure if the same is true using a 4GB or larger card with stock ROM or any of the other custom ROMs
Click to expand...
Click to collapse
Thanks for sharing your expirience, I ll be happy with another 2GB micro sd card, I no need 4GB. Only want my Strek to work without ressets. I 'll try with new 2GB Class 4.
awexdasome said:
Hi, I've replaced my original internal 2GB microSD class 2 to 4GB class 10 without any problem (i think Dell Streak will accept any class).
* Download 'QDLTool3rd_20101022_GAUSB1A130500' and unzip to folder on desktop (google 'QDLTool3rd_20101022_GAUSB1A130500').
* Power Dell Streak on the first time with inserted 4GB internal microsd card and wait until auto format is done and display error message come on.
* Power off Dell Streak by remove the battery and re-insert it back after 5 seconds.
* Plug-in USB Data cable into your computer
* Press and hold the volume up button then insert Data cable into the Dell Streak.
* Goto your QDLTool3rd folder on your desktop and execute QDLTool.exe file and select RUN option (should you get driver error then Google search, install and start again).
* On completion your Dell streak will boot into android 2.2 with old Baseband.
From here you can update latest Baseband and flash Steven 1.9 or 1.91 or in my case Simple Streak 1.3 Beta4.
Should you require help PM me. Also check out my previous post for photo of my Dell streak with inserted 4GB microSD, working.
Click to expand...
Click to collapse
This mean that original internal sd card is only class2?.....I will change it with another 2GB Class 4 micro sd card. So I must run qdl tool?....is it possible to brick my Streak with this software? Thank you very much, if I need help I 'll PM you my friend. Thanks a lot.
This is the problem with not searching for and reading the existing threads on this topic. You are getting replies from just one or two people and not the benefit of previous longer discussions.
Here are some links:
Hardware Hacking the Streak – thread at MoDaCo, main focus is replacing the internal SD Card with a faster, larger card
How-to Increase streak storage up to 62 GB – an extension/continuation of the hardware hacking thread at MoDaCo
Changing Internal SD - thread here at XDA
While I have not done this replacement I would not recommend using the QDLTool as a first attempt.
sdan87 said:
This mean that original internal sd card is only class2?.....I will change it with another 2GB Class 4 micro sd card. So I must run qdl tool?....is it possible to brick my Streak with this software? Thank you very much, if I need help I 'll PM you my friend. Thanks a lot.
Click to expand...
Click to collapse
Yes, the internal 2GB microSD is class 2 (mine is anyway). I can only tell you that I've ran QDLTool many times over and not yet does my Dell Streak Brick beyond repair (IMO, it's very hard to brick the Dell Streak unless it's hardware damaged). I've messed up my Dell Streak many times, including no power dead, no fast boot, no recovery and no response at all to any button being pressed, and so I though until I was able to recovered using QDLTool and fixed it every time.
FYi, I've removed 4GB microSD card from my Dell Streak and re-inserted the original 2GB microSd back and the Dell Streak boot up fine.
Please understand that this is my past experienced and results, in no way am I saying that the same result will be for your device.
I share my experience 2 days ago, I changed my internal microSD to a Kingston class 10 8GB card, the smallest I can find.
I did a full nandroid backup before removing anything.
Change the cards, power up and 2 partitions are automatically created, mounted at /cache and /data.
Boot to recovery and restored nandroid backup, all is well running Steve's rom 1.91.
I have a similar problem with my streak that I have just got, that it is stuck at the dell logo. When I try to run an update or factory reset it only goes half way through, and says error with e: cache.
I have done qdl but this doesn't work, tried different updates, roms etc with no success. I went onto the fastboot menu and did the engineering codes which seemed to imply a internal memory card fault.
So, my question is, if I replace the internal SD card, will this solve the problem?
I have searched various threads but cannot seem to see the correct solution.
Any help would be appreciated.
Sent from my ZTE-BLADE using XDA App
spanner44 said:
I have a similar problem with my streak that I have just got, that it is stuck at the dell logo. When I try to run an update or factory reset it only goes half way through, and says error with e: cache.
I have done qdl but this doesn't work, tried different updates, roms etc with no success. I went onto the fastboot menu and did the engineering codes which seemed to imply a internal memory card fault.
So, my question is, if I replace the internal SD card, will this solve the problem?
I have searched various threads but cannot seem to see the correct solution.
Any help would be appreciated.
Sent from my ZTE-BLADE using XDA App
Click to expand...
Click to collapse
My friend be strong and take a leap of faith. Since there is no available answer to your problem and your Dell is not working anyway, why not replace your internal microSD and then follow the method in my previous post and see (start with a 2GB or 4GB first).
awexdasome said:
My friend be strong and take a leap of faith. Since there is no available answer to your problem and your Dell is not working anyway, why not replace your internal microSD and then follow the method in my previous post and see (start with a 2GB or 4GB first).
Click to expand...
Click to collapse
I think that if you replace the internal sd card it going to solve your problem. I'm still reading for this problem on Streak, and this seems to be a common problem for Streaks . Please find on google how to dissasamble your Streak is not hard, but be careful there is flax cable under tach panel! My Streak now is working fine after Factoruy ressets and clearing dalve catches on internal sd card.....so I do not know what to do now to change the card or not....
sdan87 said:
Ok Thank you, I will replace my new internal sd card without formatting. I was searching everywhere and can't find someone that was replacing internal sd card on phone running on official 2.2.2 Froyo :S. I was found that on Streak with StreakDroid 1.9 Custom RoM is only necessary to do factory resset after replacing the new sd. I don't know if this procedure 'll work on my Streak with Official 2.2.2 ROM. So, can someone ansver me? Thanks .
Click to expand...
Click to collapse
I did, in Streak Q&A. I installed an 8gb card and it is working fine
netomx said:
I did, in Streak Q&A. I installed an 8gb card and it is working fine
Click to expand...
Click to collapse
Only with factory resset, without nandroyd or QDL Tool?
sdan87 said:
Only with factory resset, without nandroyd or QDL Tool?
Click to expand...
Click to collapse
Yes, factory reset. Didnt tried nandroid, but I read that it can be done.
Just remember to wait like 5 minutes for the first run!
So far I have been lucky fixing my memory cards with Ubuntu.You can install it along with windows or inside windows.I always have a computer with both OS's.
spanner44 said:
I have a similar problem with my streak that I have just got, that it is stuck at the dell logo. When I try to run an update or factory reset it only goes half way through, and says error with e: cache.
I have done qdl but this doesn't work, tried different updates, roms etc with no success. I went onto the fastboot menu and did the engineering codes which seemed to imply a internal memory card fault.
So, my question is, if I replace the internal SD card, will this solve the problem?
I have searched various threads but cannot seem to see the correct solution.
Any help would be appreciated.
Sent from my ZTE-BLADE using XDA App
Click to expand...
Click to collapse
When you used qdl tool....are you sure you had the update.pkg and the matching bb ams file in the same folder as qdl....and the same update.pkg on your sd card.....and no other update.pkg or mbss bb in the folder/sd card except one set
Sent from my Dell Streak using XDA Premium App
I am not an expert on the QDLTool but looking at the version that was available as 'repairtool' on StreakDroid there is no update.pkg in the zip file for that. I am no expert and have only used the versions of qdltool available from StreakDroid.
Also there is a thread in the dev section that indicates that the qdltool is married to a specific set of files unless you modify the code directly. This would mean to me that unless you make modifications to the code any files that did not come with the version of the tool you are using will not be used. Whether having additional files on the sd card or in the folder on your computer where qdltool resides will cause an issue I do not know.
im not an expert in the qdl either....but i remember when i first used it i had to download the update.pkg separetly and put it on sd card....i put a copy in the qdl folder along with the amss/bb file;this was back when the 305 rom came out,so from what i figuered,was the qdl tool is just pushing a factory restore...thats complete(not like just running a fr from streakdroid).....but it uses what ever update.pkg that you put on it.....it doesnt have a built in rom
netomx said:
Yes, factory reset. Didnt tried nandroid, but I read that it can be done.
Just remember to wait like 5 minutes for the first run!
Click to expand...
Click to collapse
Thank you very much this information is very important for me
Hello all, i'm new and noob in the android OS and tablets and stuff, so i'l need a little help from you if you would like...i've got a dell streak 5 and somehow i managed to open it and mount an internal micro sd card 8GB class 10 and i installed a android 2.2 on it with the fast boot and qdl tool. now when i try to install some apps i always receive the following msg: sorry, there's not enough space to install this item. i have a 6.4 gb of free space so...what's the problem here? it is not formatted ? and if is not how should i do this?
please help
try to unmount the external sd and try again
U need to research which card are compatible with the streak... I think it only recognizes 2 or 4gb idr
But anywho, you can't just throw in a big card without even seeing if it'll work first..
cameronmfjay said:
U need to research which card are compatible with the streak... I think it only recognizes 2 or 4gb idr
But anywho, you can't just throw in a big card without even seeing if it'll work first..
Click to expand...
Click to collapse
That's not true. I have an 8gb card on mine class 4 and works good.
Hardware Hacking the Streak – thread at MoDaCo, main focus is replacing the internal SD Card with a faster, larger card
How-to Increase streak storage up to 62 GB – an extension/continuation of the hardware hacking thread at MoDaCo
Changing Internal SD - thread here at XDA
copied from dif post
Thx marvin02
What I meant was he cant switch cards without prepping the new one and just expect everything to work..
cameronmfjay said:
What I meant was he cant switch cards without prepping the new one and just expect everything to work..
Click to expand...
Click to collapse
I did it and worked. Obviously the internal card is just for apps... is he intents to use it as media, he has to make the hack on the link
well, thanks for your help, but i recall i'm a noob and i'm going to remain a noob until i can understand you language. do stuff like linux hack os not so simple for me. yes, i can do it with a proper tutorial or so...so, if you already did this, please take me step by step like a tutorial.
i'll really appreciate your help
Drakonian said:
well, thanks for your help, but i recall i'm a noob and i'm going to remain a noob until i can understand you language. do stuff like linux hack os not so simple for me. yes, i can do it with a proper tutorial or so...so, if you already did this, please take me step by step like a tutorial.
i'll really appreciate your help
Click to expand...
Click to collapse
If you want the internal SD for apps, but open it, change you internal SD, and make a factory reset (NOT from the custom recovery, use the Dell screen).
Or do you mean to open your Dell?
Drakonian said:
Hello all, i'm new and noob in the android OS and tablets and stuff, so i'l need a little help from you if you would like...i've got a dell streak 5 and somehow i managed to open it and mount an internal micro sd card 8GB class 10 and i installed a android 2.2 on it with the fast boot and qdl tool. now when i try to install some apps i always receive the following msg: sorry, there's not enough space to install this item. i have a 6.4 gb of free space so...what's the problem here? it is not formatted ? and if is not how should i do this?
please help
Click to expand...
Click to collapse
You didn't format it before inserting the new card? The internal sd should be ext3 like this:
Code:
/dev/block/innersd0p5 /cache ext3 rw,nosuid,noatime,nodiratime,errors=continue,commit=99999,data=writeback 0 0
/dev/block/innersd0p6 /data ext3 rw,nosuid,nodiratime,errors=continue,commit=99999,data=writeback 0 0
I don't know how you could install the rom without having acorrect partition type on your sd card, though. Check to see using 'adb shell mount' on your PC. To format the sd card, you'd need a program like parted.
Hope it didn't misunderstand your problem.
yes, i installed android 2.2 without formatting the micro-sd card. if i'm correct, you'll need ext3 partition for the apps, not for the os. or it's done auto when i did this with the qdltool software.
i'll try something else and i'll post the result here
Hi,
I have question , I installed the a NAND ROM using 4GB SD card but I need more space so I purchased new SD with 8GB space.
How can I transfer the part of ROM installed on the SD from the old one to the newly purchased one without losing any data.
If I were in your shoes, I'd make a full backup of my Current ROM with the old sd in. Then, I'd insert the new card and restore the back up. (of course after making the required partition).
Marvlesz said:
If I were in your shoes, I'd make a full backup of my Current ROM with the old sd in. Then, I'd insert the new card and restore the back up. (of course after making the required partition).
Click to expand...
Click to collapse
But when removing the old one for replacing with new the phone hang
Also I tried using Mini Tools partition wizard but not working (if the Ext3 work the other Fat32 not work and vice versa) Don't know what to do and I don't want to reinstall the ROM
msdn70 said:
But when removing the old one for replacing with new the phone hang
Also I tried using Mini Tools partition wizard but not working (if the Ext3 work the other Fat32 not work and vice versa) Don't know what to do and I don't want to reinstall the ROM
Click to expand...
Click to collapse
The phone will not hang if you've got the ROM correctly on NAND. Also, try making both partitions primary, and windows on the pc will not be able to read the ext partition.
jiggyk said:
The phone will not hang if you've got the ROM correctly on NAND. Also, try making both partitions primary, and windows on the pc will not be able to read the ext partition.
Click to expand...
Click to collapse
I marked the both partitions primary but still having the same problem.
Please I need help here..
TIA
msdn70 said:
I marked the both partitions primary but still having the same problem.
Please I need help here..
TIA
Click to expand...
Click to collapse
Is the phone hanging during boot or after?
jiggyk said:
Is the phone hanging during boot or after?
Click to expand...
Click to collapse
After the phone Normal boot when I removed the SD card the phone hang that what happens..
Are you just saying that you are removing the sdcard card while your phone is booted and android active? I hope not..
Sent from my HTC HD2 using XDA App
greg17477 said:
Are you just saying that you are removing the sdcard card while your phone is booted and android active? I hope not..
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
That's what he is trying to say, unfortunately.
msdn70 said:
After the phone Normal boot when I removed the SD card the phone hang that what happens..
Click to expand...
Click to collapse
Why are you removing it while the device is on?
You should do this:
Keep Original SD card in
Boot Phone into CWM and make a back up
After it finishes, Turn off phone, put old sd card in PC, copy recent back up there, remove old and put new sd in pc and copy the back up to it
After making the partition on the new sd, put it (the new card) in your phone and boot up
Go to CWM, and restore your recently made backup
after it's done, reboot phone normally
Also, do not remove the sd-card while the phone is active ..
Because we, eu users, need some system files to be on the card and by removing it the device may become inoperative .
Marvlesz said:
That's what he is trying to say, unfortunately.
Why are you removing it while the device is on?
You should do this:
Keep Original SD card in
Boot Phone into CWM and make a back up
After it finishes, Turn off phone, put old sd card in PC, copy recent back up there, remove old and put new sd in pc and copy the back up to it
After making the partition on the new sd, put it (the new card) in your phone and boot up
Go to CWM, and restore your recently made backup
after it's done, reboot phone normally
Also, do not remove the sd-card while the phone is active ..
Because we, eu users, need some system files to be on the card and by removing it the device may become inoperative .
Click to expand...
Click to collapse
I did exactly as you told me to do but when boot the phone it keep restarting in the white HTC screen!!
I tested two partition size 2GB and 4GB and both gave same result
msdn70 said:
I did exactly as you told me to do but when boot the phone it keep restarting in the white HTC screen!!
I tested two partition size 2GB and 4GB and both gave same result
Click to expand...
Click to collapse
Sorry for late response.
Are you sure you are setting the exact partitions on your sd-card with the same settings?
Hello guys,
I do have streak ready with cuted off pice of plastick to get acces to my internal sd card. I did ordered 8gb 10 class card already. Looking for some guide or tutorail how to make streak working after putting new sd inside. I did read about some partitions and stuff but i dont know how to do it. Its any chance somone could help me?
Do a backup with streakmod, turn off, replace card, turn on and let it format its self, turn off, do a streakmod recovery..boom done. But you might have problems with 8gb card. 4gb is what I read it can handle.
Sent from my Dell Streak using XDA App
There's a video on YouTube for this.
Sent from my Dell Streak using XDA App
homer4evr said:
There's a video on YouTube for this.
Sent from my Dell Streak using XDA App
Click to expand...
Click to collapse
Could you tell me if you know the name of this video? I did try find something but no luck so far
http://www.youtube.com/watch?v=6w4AbtIGp8A&feature=youtube_gdata_player
Sent from my Dell Streak using XDA App
I have no idea what there saying but you can see how they do it.
Sent from my Dell Streak using XDA App
homer4evr said:
http://www.youtube.com/watch?v=6w4AbtIGp8A&feature=youtube_gdata_player
Sent from my Dell Streak using XDA App
Click to expand...
Click to collapse
I did that already but thx for link
I replaced my internal card with a class 10 4GB, works fine...
popcity said:
I replaced my internal card with a class 10 4GB, works fine...
Click to expand...
Click to collapse
What steps you did to make it works?
the phone suport up to 32gb internal memory, i replace the 2gb internal memory with 8gb class10 3 months ago and everything is ok
deejayviral said:
the phone suport up to 32gb internal memory, i replace the 2gb internal memory with 8gb class10 3 months ago and everything is ok
Click to expand...
Click to collapse
Coule you write for me what you did step by step? Im not talking about physical replacement.
is so easy - with the phone turned off replace the internal 2gb card with another (4/8/16/32 gb - 2/4/6/10 class), after that u turn on the phone and let it format the new card itself, after that turn off the phone; on the external card u need to put the image of OS, and after u start the phone u need to enter in fastboot to start the installation of the os . that is all.
deejayviral said:
is so easy - with the phone turned off replace the internal 2gb card with another (4/8/16/32 gb - 2/4/6/10 class), after that u turn on the phone and let it format the new card itself, after that turn off the phone; on the external card u need to put the image of OS, and after u start the phone u need to enter in fastboot to start the installation of the os . that is all.
Click to expand...
Click to collapse
To the best of my knowledge you don;t do updates in fastboot mode - you do them in recovery mode. As I have written wehn I put the new 8 GB card in the inner SD slot I did a factory reset from the first screen in StreakMod Recovery and the card was formatted properly. I have since flashed a few different roms to the Streak (352, 360, GSC) with no problems,
yes in recovery mode, my mistake, now i see it
Y'all might want to take a lot at TheManii's guide to flashing the image of a stock inner SD card while you are replacing your factory one, it worked for me
Sorry for my english.I tried to replace the inner sd card dell streak 5 with 4gb. It did not boot, stuck on dell logo. Please help?
how do we expand the /system folder to 512mb?