Database Users

o2 wap settings are driving me mad...

Hi folks,
OK, today I did a hard reset and decided to bypass the o2 bloatware - everything is fine apart from no access to the internet.
I have searched this board and have tried about 30 differing settings - including some cab files and none will work for me - it used to work fine... and yes, I am on a contract...
Apart from resetting again and loading the bloatware - is there any foolproof way to get this sorted - I am tearing my hair out!!!
Please help as its driving me mad - the error message I get is "Dialled mobile.o2.co.uk No modem at above number etc..."
OK - back after Doctor Who...

I'm don't know if you've tried the ones on here or not but here goes...
http://www.filesaveas.com/gprs.html

Now this IS strange - decided to reinstall all the o2 bloatware... and the GPRS web access still doesn't work... so what's gone wrong?

ok.... nno need to worry,
1st call your network to confirm you still have GPRS access, bcos networks can sometimes take you off without any notification...

and heres a o2 uk pay monthly cab to setup mms gprs

Hiya - thanks for the info...
Just rang o2 and guess what - gprs is not activated on my sim card... he couldn't tell me where it had gone, but he has added it back on and says it will take 48 hours...
He says I need to ring back for the settings - but surely the correct settings are already on... or do they need to do anything else at that end?

If you done the hard reset and then soft reset when it comes up to warn you that it's about to install the "o2 bloatware" then it's more than likely that the settings for o2 gprs will not be on there. This is because it normally gets installed along with the bloat.
Just wait the 48hrs and if you still can't connect then install the cab file jamichy has provided above or enter the settings manually from...
http://www.filesaveas.com/gprs.html

Hi!
My view:
if your GPRS was working before your hard reset, and not now, I think it's more likely that the O2 rep you talked to has no idea what he/she's on about, rather than the SIM strangely deactiviating GPRS capability.
I also had the same trouble (on O2 contract) getting my GPRS, MMS, and WAP working without the O2 rubbish. I followed these wonderful instructions from the board (can't remember which post they're from), and now all works sweetly,
I hope it works for you!
Shahid
___________________________________
Instructions:
To get GPRS and MMS to work you also have to put these settings in, they are an adaption of some found on these fourms and other sites because people's instructions weren't as clear and I couldn't get them working. I then did a hard reset and copied down the settings with all the o2 crap installed and then did a proper hard reset:
Start > Settings > Connections > Connections > Under My ISP tap Manage Existing Connections and then Tap Edit (if this isn't present then tap 'Add a new modem connection') The Select a Modem drop-down box should be set to Cellular Line (GPRS), Connection name: Mobile Web, Tap Next Access Point Name: mobile.o2.co.uk Tap Next Username:O2web (capital O, not a zero)
Password: password
Domain: leave blank
Tap Advanced
On the TCP/IP tab, only Use Server-assigned IP Address should be selected Tap the Servers tab Use Specific Server Addresses should be selected
DNS: 193.113.200.200
Alt DNS: 193.113.200.201
Tap Ok
Tap Finish
GPRS WAP settings
Start > Settings > Connections > Connections > Under My Work Network tap Manage Existing Connections and then Tap Edit (if this isn't present then tap 'Add a new modem connection'), Connection name 'O2 Active', The Select a Modem drop-down box should be set to Cellular Line (GPRS) Tap Next Access Point Name: wap.o2.co.uk (for Prepay enter payandgo.o2.co.uk) Tap Next Username2wap (lowercase o this time! not zero) (for Prepay enter payandgo)
Password: password
Domain: leave blank
Tap Advanced
On the TCP/IP tab, only Use Server-assigned IP Address should be selected Tap the Servers tab Only Use Server-assigned Address should be selected Tap Ok Tap Finish Tap Proxy Settings Tap Advanced In the WAP field enter 193.113.200.195 In the field to the right of this enter 9201 Tap Ok and exit
MMS settings
Start > Messaging > Tools > MMS Settings Connect Via: My Work Network (this links to the GPRS WAP settings) Tick Retrieve Messages Immediately Tick Ok to download when roaming Tick Save sent messages Attempes before give up: 3 Photo Resolution: Original Tap the Servers tab Tap O2UK Server Name: O2UK
Gateway: 193.113.200.195
Port Number: 9201
Server Address: http://mmsc.mms.o2.co.uk:8002 Sending Size Limitations: 100K Tap Ok twice to exit
Make sure you have wap version 1.2 selected in MMS settings!!
MMS and GPRS work fine now.

OK - here is an interesting question - why do the numerous cab files for the o2 contract settings all have a password that is longer than the word "password"? :?:

awaterhouse said:
OK - here is an interesting question - why do the numerous cab files for the o2 contract settings all have a password that is longer than the word "password"? :?:
Click to expand...
Click to collapse
I cant be sure, but its most likely the same reason windows (desktop) does it. once you have saved the password it is just *'s. the number of stars or blobs no longer has to relate to the number of letters in the password (probably to make hidden passwords harder to guess by knowing how long they are). - it hasn't changed the svaed password to something longer, just makes it "look" longer.

UPDATE
Got an email from o2 today regarding my problems...
After checking your number below, it appears that there has been a
problem with GPRS from our side, and nothing to do with the upgrade on
your device. I have enquired with customer care for you, and they advise
that GPRS will be going back on to the network from lunch time tomorrow
(unfortunately no specific timescales can be given). I do apologise for
this, but if you wish to take this further...
Fingers crossed...

s_h_a_h_i_d said:
Hi!
My view:
if your GPRS was working before your hard reset, and not now, I think it's more likely that the O2 rep you talked to has no idea what he/she's on about, rather than the SIM strangely deactiviating GPRS capability.
I also had the same trouble (on O2 contract) getting my GPRS, MMS, and WAP working without the O2 rubbish. I followed these wonderful instructions from the board (can't remember which post they're from), and now all works sweetly,
I hope it works for you!
Shahid
___________________________________
Instructions:
To get GPRS and MMS to work you also have to put these settings in, they are an adaption of some found on these fourms and other sites because people's instructions weren't as clear and I couldn't get them working. I then did a hard reset and copied down the settings with all the o2 crap installed and then did a proper hard reset:
Start > Settings > Connections > Connections > Under My ISP tap Manage Existing Connections and then Tap Edit (if this isn't present then tap 'Add a new modem connection') The Select a Modem drop-down box should be set to Cellular Line (GPRS), Connection name: Mobile Web, Tap Next Access Point Name: mobile.o2.co.uk Tap Next Username:O2web (capital O, not a zero)
Password: password
Domain: leave blank
Tap Advanced
On the TCP/IP tab, only Use Server-assigned IP Address should be selected Tap the Servers tab Use Specific Server Addresses should be selected
DNS: 193.113.200.200
Alt DNS: 193.113.200.201
Tap Ok
Tap Finish
GPRS WAP settings
Start > Settings > Connections > Connections > Under My Work Network tap Manage Existing Connections and then Tap Edit (if this isn't present then tap 'Add a new modem connection'), Connection name 'O2 Active', The Select a Modem drop-down box should be set to Cellular Line (GPRS) Tap Next Access Point Name: wap.o2.co.uk (for Prepay enter payandgo.o2.co.uk) Tap Next Username2wap (lowercase o this time! not zero) (for Prepay enter payandgo)
Password: password
Domain: leave blank
Tap Advanced
On the TCP/IP tab, only Use Server-assigned IP Address should be selected Tap the Servers tab Only Use Server-assigned Address should be selected Tap Ok Tap Finish Tap Proxy Settings Tap Advanced In the WAP field enter 193.113.200.195 In the field to the right of this enter 9201 Tap Ok and exit
MMS settings
Start > Messaging > Tools > MMS Settings Connect Via: My Work Network (this links to the GPRS WAP settings) Tick Retrieve Messages Immediately Tick Ok to download when roaming Tick Save sent messages Attempes before give up: 3 Photo Resolution: Original Tap the Servers tab Tap O2UK Server Name: O2UK
Gateway: 193.113.200.195
Port Number: 9201
Server Address: http://mmsc.mms.o2.co.uk:8002 Sending Size Limitations: 100K Tap Ok twice to exit
Make sure you have wap version 1.2 selected in MMS settings!!
MMS and GPRS work fine now.
Click to expand...
Click to collapse
Hello, I know this is a bit old but I am having problems setting up my o2 connections on my Wizard recently flashed to TNT5.0.
I've done the above for GPRS and Wap settings but they're not working.
They both ad +1 dial codes, I can't get rid of them for some reason so it won't work. Any clue as to what I'm doing wrong?

Ignore the above, i finally found a working cab file, all is resolved. I am happy!

O2 HD2 MMS settings/configuration

Hey Folks,
I'm having difficulty setting up MMS on the HD2, I have just called O2 and they don't support this device. Does anyone know how to configure the settings manually for MMS messaging?

Hi, I got these settings from an helpful O2 rep.
MMS setup – ensure GPRS settings are completed
· Select 'Start' > Select 'Messaging' > Select 'Menu' > Select 'MMS Configuration' or ‘tools’ > Select 'Servers' tab > Select 'New'
· Type in Server name or 'O2 MMS'
· Select 'Gateway' and type in '193.113.200.195'
· Select 'Port number' and type in '9201'
· Select 'Server address' and enter 'http://mmsc.mms.o2.co.uk:8002'
· Select 'Connect via' and select 'My Work Network''
· Click 'OK'
· Highlight 'O2 MMS' and click on 'Set As Default'

are you having trouble sending MMS messages? I ran the auto setup function and I can send messages fine....problem is...I'm not receiving any!!

and I cant see any way to enter the setting manually since message menu doesn't exist.
tried the 02 website, it just says there's a problem and can't proceed....tried texting for the settings, doesn't work either
so...any more ideas?

twisted-pixel said:
are you having trouble sending MMS messages? I ran the auto setup function and I can send messages fine....problem is...I'm not receiving any!!
Click to expand...
Click to collapse
I had same problem swapped sms service to GSM only now I receive texts fine
fingers crossed

MMS problems not SMS

Yea I got the manual configuration settings from 02 aswell but unfortunatly the options are not available in the HD2, don't know if its a HTC sense thing or a WM6.5 design change to the UI that disables the old MSS configuration settings... anyone got suggestions... I hate having one of the best phones on the market and can''t receive MMS's ;-(

twisted-pixel said:
MMS problems not SMS
Click to expand...
Click to collapse
oops sorry
my mms will send but not receive .grr.. least got sms working tho

Anybody solve this issue, I can send but not receive MMS on O2 in the UK.

I just use the settings that the phone sets up for O2, they are the contract settings though and not PAYG, just tried it now and I also can send mms but can't receive them, and O2 won't help as they don't support the phone.

Hi, I couldn't receive MMS on O2, but have manually configured it, and it's now working fine.
The configuration screen is found on the Sense UI here:
Messages, All messages, Menu, Settings, Options, MMS Server (right softkey)
Hope that helps.

try this, it worked for me.
Scroll to settings>menu>all settings>connections>connection setup.
Now choose your Country and Operator. Let it do its bit and re-boot.
Should be all working now.
chill......

chill today said:
try this, it worked for me.
Scroll to settings>menu>all settings>connections>connection setup.
Now choose your Country and Operator. Let it do its bit and re-boot.
Should be all working now.
chill......
Click to expand...
Click to collapse
Works for me as well, but only if you are on contract, the PAYG settings are different.

configuring MMS Settings
garethmc said:
Yea I got the manual configuration settings from 02 aswell but unfortunatly the options are not available in the HD2, don't know if its a HTC sense thing or a WM6.5 design change to the UI that disables the old MSS configuration settings... anyone got suggestions... I hate having one of the best phones on the market and can''t receive MMS's ;-(
Click to expand...
Click to collapse
Hi not sure if you solved this but for other peoples reference here is how you can check your settings.
Run the connection setup which will create an MMS connection that you can check in
all settings /connections/connections/advanced tab/select networks> there should be a connection called *.* MMS Settings > click edit to make sure the settings are as they should be.
* make sure when you exit the network management screen that your default internet connection is selected or your internet will not work.
exit from here and then go to messaging tab on the home screen.
choose all messages/menu/settings/options.
in this screen choose menu/MMS server and then configure or check your settings.
In my case the connection wizard had a space in the server name and the wrong port selected
Hope this helps

From connection setup makesure you select to update connection setup database. It found a new one when i did it.

optiknerv said:
From connection setup makesure you select to update connection setup database. It found a new one when i did it.
Click to expand...
Click to collapse
thanks but the connection update still contains errors for me
hence the need for manual adjusting
regards lakeman

Right,
Firstly I hope that people have solved their issues with this but if not here's how i got mine to work.
It seems that there are two steps to gettign MMS to work properly.
Step 1: Configure the MMS Settings:
There might be other ways of doing this but this is how i did it and it worked.
Start > HTC Messages > Menu > Settings > Options > Menu > MMS Server
Select O2 UK Or whatever if you're doing this for another network.
The O2 settings should be as follows:
Contract & PAYG are the same here.
Server name: O2UK
IP Address: 193.113.200.195
Port Number: 8080
Server Address: http://mmsc.mms.o2.co.uk:8002
Connect Via: My Work Network *
This is actually the important bit and the throwback to theold days of windows mobile. MMS' are not received over you're standard data connection so you have to specify different settings so HTC / O2 are using the Work Settings to get around this.
Send Limit: 300KB
WAP Version: WAP 2.0
Step 2: Configure the connection settings for 'My Work Network'
Start > Settings > Menu > All Settings > Connections > Connections
Select 'Manage existing connections' under My Work Network.
Select what ever option is there and selected and hit the edit button.
Enter a name for the connection: anythingyouwant
Select a modem: CellularLine (GPRS)
hit next.
Now here the settings do start to differ for contract and PAYG:
Contract: Access Point Name: wap.o2.co.uk
PAYG: Access Point Name: payandgo.o2.co.uk
hit next.
Contract: Username: o2wap
Contract: Password: password
Contract: Domain: (Leave Blank)
PAYG: Username: payandgo
PAYG: Password: password
PAYG: Domain: (Leave Blank)
hit finish.
Hopefully you should now be enjoying MMS on you're Leo

Missing DLL
Phoenix,
Looks good except that having gone back to the winmobile sms client as I need access to my subfolders, it seem that the dll that is "removed" as part of that process is needed to make MMS work on the HD2. Have been experimenting and if one goes back to the HTC client (this recreates the missing dll) then MMS messaging works fine.
Although MMS is not a big deal to me it irks me that I can't get it to work in these circumstances. Have chased Zenyee, who developed this tweak in the first place, on how he is getting on with solving the MMS issue but no response to date.
So anyone in the same boat who has managed to crack MMS sending, please PM me.
Cheers
WB

Ive not cracked it as such but found something interesting....I was fed up that my device couldnt do mms whilst using leo energy rom, tried doing manual settings etc,ended up flashing original leo uk o2 rom....
I have crossed reference all the settings and the only thing i find different is that on the original o2 rom under "my work network" gprs is selected where as on cooked rom gprs, 3g is the option.
could this simple thing be causing issues??

HELP
i'm also having trouble with o2 mms settings the help on this page did not help. i cannot send or receive mms. i purchased the handset from ebay, it was locked to tmobile. i've had it unlocked and all other functions (web, mail) work fine. please help. it's driving me nuts.

Help Fixing MMS on my 1.5 Telus Hero

NEVERMIND. FIXED ! I just plugged random addresses into random boxes until it worked.
I'm using a lightly modded 1.5 build on a Telus Hero. The previous owner was a guy who did a bit of his own ROM modding.
I just bought the phone, unlocked, and switched to Bell. Now I can't MMS. Any ideas?
Any help would be appreciated.
I'm guessing it has something to do with the MMS APN's. Unfortunately this guide from my carrier does not jibe with the boxes in Android.
#
1. Navigate to your device's Connection Settings menu
2. Enter new service information within the appropriate fields as follows:
* APN: pda.bell.ca
* Proxy server: web.wireless.bell.ca
* Port: 80
3. Save changes
4. Navigate to your device's Messaging menu
5. Select Multimedia Messaging settings
6. Select Message Centre or MMS gateway option
7. Enter new Message Centre/MMS gateway information within the appropriate field as follows:
* MMSC URL: http://mms.bell.ca/mms/wapenc
8. Save changes
9. Set new Message Centre/MMS gateway as the "active" gateway (if required)

scouzer said:
NEVERMIND. FIXED ! I just plugged random addresses into random boxes until it worked.
Click to expand...
Click to collapse
Niiice,.... Good ol' trail and error eh?
Post up what info you put into what field to help anyone in the future.

MMS issues with unlocked HD2

Hello all, I am requesting help with an issue that I am having with my HD2.
Ive had the phone for a little over a month now, and it is a great device. I bought the phone unlocked, and it was working just fine. But recently the pass code (the 4 digit pin to use the phone) to unlock the phone stopped working, because of this i had to do a hard reset on the phone. This set everything back to factory settings.
After some work I got most of everything back to normal, my only issue that i am having is Sending MMS messages. I have the server set up correctly as well as the data connections to the internet but for some reason it still wont let me send MMS messages.
I searched all over the board but nothing i found could help me so far.
If anyone has any advice or know how on how to fix this problem it would be greatly appreciated.
Thanks
-Jmann

Lets start off with,
Country
Network
shall we lol

Sorry sorry lol, 1st time poster
Im on the AT&T network in USA

probably be better off having a gander through this section mate,
http://forum.xda-developers.com/forumdisplay.php?f=632

Hey there, i was having the same problem, im on Virgin uk..
I found this in another thread, worked great!
Do the changes is IP address I've highlighted below in red make a difference?
From http://www.virginmobile.com/vm/setup3gAndGprs.do?contentId=setting.up.3g.gprs.howdoi.sm101
1. On the handset, tap Start > Settings > Wireless Controls.
2. Tap the Menu > Connections > Advanced tab.
3. Tap Select Networks > Under the first drop down box, tap New…
4. In the Enter a name for these settings: field, enter Virgin MMS
5. Tap the Modem tab > New…
6. In the Enter a name for the connection: field, enter Virgin MMS
7. Tap the Select a modem drop-down list and select Cellular Line (GPRS, 3G) > Next.
8. In the Access point name: field, enter goto.virginmobile.uk > Next.
9. Enter the user name and password listed below. If no value is listed, leave the field blank.
* User name: user
* Password:
10. Tap Finish.
11. Tap ok three times
12. Tap x to close the Settings screen.
Setting up the MMS account
1. On the handset, tap Start > Messages.
2. Tap Menu > Settings >Options > Menu >MMS server > New.
3. In the Server name: field, enter Virgin MMS
4. In the IP address: field, enter 193.30.166.2
5. In the Port number: field, enter 8080
6. In the Server address: field, enter http://mms.virginmobile.co.uk:8002
7. Tap the Connect via: drop down list and select Virgin MMS
8. Tap the WAP Version: drop down list and select WAP 2.0 > Done
9. Tap and hold on Virgin MMS and select Set As Default.
10. Press the end call key to return to the home screen.
The settings have been applied and are ready for use.
Setting details
Below are the details of your settings
Name: Virgin MMS
IP Address: 193.30.166.2
Username: (none)
Password: (none)
Homepage: http://mms.virginmobile.co.uk:8002
Server Address: goto.virginmobile.uk

Ive searched the entire board thoruoughly, and unfortunatly most of them only talk about fixing the MMS server (which isnt my problem), unless i overlooked something

@Shum97 i appreciate that, but thats the set up for Virgin Mobile phones, not ATT

No other help? Anyone?

i dont know about at+t but on o2 uk i have to have two data connections set up. One is the proper mobile data "mobile web", the other is wap, "o2 active", and this is the one used for mms.
If i set the mms settings to use the regular data account it fails.
Thing is, when you go to settings all settings connection connection and press 'manage existing connections' you only see the mobile web account available to edit.
What you need to do to see the other is go to advanced tab, and 'select networks'.
In the top dropdown, mine says mobile web, but if i change that and choose o2 active instead, click OK, and now go back to the tasks tab, the top half now lets me click 'manage existing accounts' to edit the o2 active account instead of the mobile web account.
(dont forget to change it back, else progs that auto connect to the net will try to use the wap account. In my case it still works, but is slow, and i think costs.)
So, , , not sure if it is any help to you, but when i set up manually, (and i have done three or four times) i ...
1 - set up the o2 active wap account
2 - set up the mobile data account
3 - set up the mms server settings, making sure to choose o2 active and not mobile web as the connection.

THanks alot, ill be sure to give this a try, Does anyone think Flashing my device might help with my problem?

jmann0140 said:
Does anyone think Flashing my device might help with my problem?
Click to expand...
Click to collapse
only if the 'connection setup' has details of the at+t network in it. connection setup for the euro leo can be found as a cab, im sure the tmo one can be too, but i suspect neither will have att network settings in it.
Id guess it's manual all the way, sorry.

ah i see, ill play around with it and see what i can do then

WindMobile MMS

Hi all!
I had a helluva time getting this sorted out as WindMobile does NOT have any FAQ or other info regarding MMS setup for their network particularly for the HD2.
Here is what I confirmed with Wind and it works on my phone usine WinMo 6.5;
First create a "new" internet connection.
Go to your "Settings", "Wireless Controls", then the "Menu" on the bottom right and select Connections.
Select the Advanced" tab.
Select "Select Networks"
On the Network management screen "programs that automatically connect to the internet should connect using, and select "New"
On the General tab Enter a name (WindMobile MMS)
On the Modem tab hit "New"
Enter a name for the connection (Wind MMS)
Select a modem (Cellular Line GPRS)
Next
In access point name enter mms.WINDmobile.ca (With CAPS!!)
Next
Enter nothing for user name, password, domain etc.
Finish
Now you will need to configure the MMS settings in your messaging.
Go the the messages screen
Select "All Messages"
Select Menu, Settings, Options
Select Menu, MMS Server
Select "New"
Enter a server name (mms.WINDMobile.ca *Exactly like this!!*)
Enter the IP (74.115.197.70)
Enter the port number (8080)
Enter the server address (http://mms.WINDmobile.ca) (With CAPS!)
Tap "connect via" and select the WindMobile MMS connection you created in the steps above.
Select "Done"
APN - mms.WINDmobile.ca
Proxy - <N/A>
Port - <N/A>
Username - <N/A>
Password - <N/A>
Server - <N/A>
MMSC - http://mms.WINDmobile.ca
MMS proxy - 74.115.197.70
MMS port - 8080
I was told there is a 300kb limit but I have sent test msgs to myself that were aroun 500kb however anything larger wouldn't send.
Hope this helps some people!