Since my phone finally updated to ICS (non-root) Foxfi's Wifi now works on my phone. I used the Bluetooth before the update and yes i know BT is better as it saves battery. Yet when i try to connect my N7 to my rezound it'll find it but it'll forever look for the IP address. Is this something normal or is there a work around to fix the wifi. I'd like to have both options if needed be. Thanks
Edit: Just tried it with my laptop & other wifi only cellphone and nothing.
Related
After connecting to 3 different wireless connections and none of then working, I'm concluded that my wifi isn't working.
I go to settings and check wifi on, it finds the network, connects, but I lose my entire data connection for the duration wifi is turned on!
Is anyone else having this problem?
Sent from my Samsung Vibrant
I'm having the same issues with the wifi. I downloaded wifi analyzer to make sure I was on a good channel. Set it to the best channel and my signal strength is 100%. I will be able to connect for a little bit but for some reason it goes in and out, connection unsuccessful, yada yada yada. I messed with all the troubleshooting solutions for my router (dgl-4300) but nothing works. If anyone can reply with a fix or point me in the right direction, that would be greatly appreciated.
Same Issues
Any help is greatly appreciated. Data working fine when on 3G but Wifi = no data. Connection is fine, IP is fine.
UPDATE: It's working again on my home WIFI. Will have to see if it's just an "at work" issue. Hopefully IT can assist.
Same problem with Verizon MiFi
I have had ZERO problems connecting to the Linksys access points we have setup at my home and my office, but recently my work provided me with a Verizon MiFi (as well as an iPad - don't hate ) and I've had MANY issues trying to get my Vibrant to consistently connect to the MiFi.
My iPad, Motorola Droid, and Laptop have no issues connecting to the MiFi.
On my Vibrant I'm running the 2.1 stock ROM with root & the latest ClockWork recovery.
It will "connect" to the MiFi (I use quotes because I can't really tell - it AT LEAST receives an IP). But I'm unable to send and receive data. I can't even browse to the MiFi's internal configuration page .
To FINALLY get it to connect consistently I have to do some kind of random combo toggling the wifi off and back on and then turning the MiFi off and back on and it will EVENTUALLY connect and stay connected with data flowing freely.
I've customized my configuration a little bit on the MiFi so I'm going to reset it back to factory and not change the config to see if it makes a difference - because at lunch I was able to connect to my boss' MiFi with no problem. I'm thinking it may either be the phone or the mifi...
I've connected to about 10 different wireless networks with NO issues, at all. The connectivity is actually much better than my G1/Nexus.
HOWEVER, last night at a bar I was connected to their wifi, strong signal, but I was not able to use Data. I was in a very poor reception area for T-Mobile... don't think that could be an issue, bit the other places I use wi-fi that is not the case.
I just chalked it up as a fluke and moved on. Not sure what was wrong.
I had this happen to me today. I just rebooted and it went away. Toggling wifi didn't help, but I only tried it once. The phone reboots so quick I figured I'd give it a try.
I have set the phone up manually with static ip. Seems like its a problem with the dhcp.
robnil said:
I have set the phone up manually with static ip. Seems like its a problem with the dhcp.
Click to expand...
Click to collapse
I'm gonna try this.
Sent from my SGH-T959 using XDA App
(Yes, I've searched...)
I see several people "working" in Ad-hoc mode. But none of them actually directly reference Barnacle. I've been messing with theis for over a week, and can't seem to get this figured out, or if it's a lost cause, and I need to get a new phone.
I've got a Sony X10 Mini Pro- infrastructure mode is still a ways off, and I'm running the new Taboonay 3.2 on the Acer. I have Ad-Hoc, I can connect, if I manually specify an IP- DHCP never connects.
There is no surfage, though. I can't even ping the IP of my phone. I show connected, get the up and down arrows, like it's connected, but no throughput.
Has anyone actually gotten this to work? Do you think it's a barnacle problem, or is it something I can tweak in the Acer?
I have the same question. I havent been able to get this to work.
Barnacle worked for me in the past.they did a update then no more worked. I switched to wifi tether.and I think its better.I even donated money to the other.
Sent them several emails with not one single reply.kinda sad but its life.
works for me from myn my samsung intercept.
Question can you connect to your phone using another devive like a laptop?
Does your acer even see the barnacle in the wifi settings?
If not make sure the adhoc patch is installed it think when i went to taboonay i also had to reinstall the patch.
Yes, Barnacle does work with a lappy, and yes, the tab does see the barnacle ad-hoc, it even connects- if given a static IP. Just not able to negotiate a network connection- no ping, destination host unreachable.
Try wifi tether.I had the same issue .wifi tether is faster as well and free also.
My phone is x10 mini running on cyanogenmod 7 2.0.7.
i am using barnacle tether on it and it becomes a ad-hoc hotspot. THe problem is my iconia a500 has issues working with the connection. I can see the hotspot (i have changed the wpa supplicant file to that of xoom available) so i get a *before the name but as soon as i enter the password of wep and click on connect button,it shows connecting and then obtaining ip address and that never stops. on clicking on that it shows that the signal is poor and decibel = -1. What the ****!
Please,can anyone help me out here?
erica_renee said:
Try wifi tether.I had the same issue .wifi tether is faster as well and free also.
Click to expand...
Click to collapse
erica_renee,
I am so glad that you posted this. Even happier that I remembered it. Today around 4:30pm my dsl died. Called in and it is something that effects my little area. And of course they are working on it. Funny how the phone still works, but anyway... This was especially annoying because a friend gave to me a HTC Aria with a cracked screen. I'd just repaired it, started rooting it and installing CM7. The timing was typical.
I was using Barnacle to tether my pc, a tablet and another phone. What's worse I am in an AT&T Edge only area. So it was PAINFUL at best. I finally remembered your suggestion, that you mentioned a speed improvement, and also that I had installed WiFiTether after I read that.
Well I ain't gonna lie and say that I was able to browse on one device while I netflix'd on another while downloading on the other... But I can easily be getting something from the market on one of the devices and still manage to browse on my pc. Which is a terrific improvement to what Barnacle was doing for me.
Barnacle was like dial up on a bad day. WiFiTether is easily twice as fast as the old dial up ever was. Maybe more.
So you really saved me from going nuts. Thanks so much! And I'll go ahead and say thanks for my Brother in town. If that hadn't worked I would have been camped out on his lawn modding a phone...
I have looked but can't find a solution. I have the transformer 101 tablet and can't get it to connect to my tmobile mytouch 4g. I'm posting in this forum because I can get the tablet to connect to my computer so I figure it has something to do with the phone. I'm trying to get a bluetooth connection so I can tether. I don't use much data but I'd like to know I could do it with the tablet and make a connection if wifi not around. I have rooted and installed stock Android 2.3.4. I don't know much about Bluetooth or WIFi but from my readings I'm think it might have something to do with PAN BT profile. If this is the case, is this a software thing? Is their a ROM that has the PAN BT profile? I like some of the Sense Apps so I'd like to stay with a stable Sense ROM. I'd like to be able to stream Navigator when I need it or brows the internet while waiting in the parking lot for my husband. Yes I can do it on the phone but my eyes are bad and a larger screen is so nice. I don't come anywhere near a GB of data each month...just want to be able to connect when sitting in my car and give myself a bigger screen.
I must be missing something here. Why not install wifi tether or one of the myriad sense 3.5 ROMS in the dev section that ALL have a working wifi hotspot?
Well my thinking may be wrong on how Bluetooth and wifi work but I was thinking there isn't always a wifi connection, but there would always be a signal with bluetooth connecting the tablet to the phones 3G and 4G. I was hoping that, if tablet paired to phone when traveling, I could use the bigger screen on the tablet and navigation would run like on the phone. I'd like to use the tablet as much as possible and I'm thinking that in the country there wouldn't be any wifi hotspots. Sorry if I've got this all wrong. Most of the time I would use wifi and I've only used that at home or work....never hotspots.
As far as ROM's go, I was thinking of the Virtuous Affinity or Unity ROM's but didn't know if they were going to give me the bluetooth connection I was looking for. I can't remember but thought I read that you couldn't do some things in 3.5 that you could do with ealier versions. Do you know why the tablet can't connect with the MyTouch? Is it the PAN BT profile. I know the tablet doesn't do adhoc. Sorry but I did try to read up on it. I was just thinking of the message I see. They are paired but they wont connect. I click on the bluetooth device but it doesn't connect
I've tried to understand what your asking but I'm still confused. Are you trying to make a wifi hotspot off your phone, then connect your transformer to the hotspot, to use the internet?
If I helped, give thanks, if you please.
........Death before dishonor........
Team inferno
Leader
d2dthetide said:
Well my thinking may be wrong on how Bluetooth and wifi work but I was thinking there isn't always a wifi connection, but there would always be a signal with bluetooth connecting the tablet to the phones 3G and 4G. I was hoping that, if tablet paired to phone when traveling, I could use the bigger screen on the tablet and navigation would run like on the phone. I'd like to use the tablet as much as possible and I'm thinking that in the country there wouldn't be any wifi hotspots. Sorry if I've got this all wrong. Most of the time I would use wifi and I've only used that at home or work....never hotspots.
As far as ROM's go, I was thinking of the Virtuous Affinity or Unity ROM's but didn't know if they were going to give me the bluetooth connection I was looking for. I can't remember but thought I read that you couldn't do some things in 3.5 that you could do with ealier versions. Do you know why the tablet can't connect with the MyTouch? Is it the PAN BT profile. I know the tablet doesn't do adhoc (point one). Sorry but I did try to read up on it. I was just thinking of the message I see. They are paired but they wont connect. I click on the bluetooth device but it doesn't connect
Click to expand...
Click to collapse
There a couple things wrong with this post 1) the tablet does support and use AD-HOC tethering. I know that for a fact because I've had people connect to my home network via my tablet just to show off. Pretty embarrassing making them use my Android Tablet to connect their iPad to my home network. 2) If you are just wanting to use your tablet as a navigation unit, use the Google maps while you are connected to WiFi to find directions to where you want to go, then press the navigate button. It'll work w/o a data signal. I've done it several times. 3) you don't need blue-tooth to bridge the Tablet to the phone. This doesn't work like Blackberries and the playbook. You can use the Wi-Fi Tether .apk from Google's source code to do just that. [http://code.google.com/p/android-wifi-tether/downloads/list] 4) There has to be a blue tooth stack installed on the Phone, and on the Tablet that will allow them to share blue tooth connections for Internet. I have TF101 and have yet to find such a BT stack.
I'm sure I'm not alone in this.
My N4 won't connect to wifi. Well it connects but Won't keep a connection to complete a playstore app install nor update the system itself?
This is what I posted on "Issue 40065: Nexus 4 and Nexus 7 Wifi Drops connection Android 4.2"
New device just received. Will connect to wifi but unable to install any apps thru play store.... Just shows data transferring but none actually happens. I'm unable to install none of the gapps updates. Left it alone for 2 days did not help. removing password from router and making it an open router did not help. Now trying to decide I should return the device as it is only usable as a phone not a multimedia device which this N4 should be?
There are a lot of people having the same kind of issue on this phone. A little search brings up lots and lots of complaints.
Still unable to connect to my router encore model 2AN3.
Tried to connect to open wifi router at McD and [email protected]#$ - still no go. It will connect think about it and stops. The icon at the top turns green and gray and keeps doing it.
How ever I was able to connect to the open wifi router on another Nexus S (my older phone) and was able to download updates and install said applications from play store.
This tells me that hardware is good. Software coded so badly that it is unable to keep a connection to routers.
So if you need to use this phone on a wifi router - wait until google fix this or get another phone.
As for me - it is a shame I will have to return this phone to google as it is useless media device. Just a phone which I can get a cheap phone for 10 bucks not $400 piece of [email protected]#$%T.
Sorry for the RANT.
Click to expand...
Click to collapse
Also flashed rom CM10.1 stable and xylon 17 stable. Still same problem repeated. both ROMS can connect to my hotspot on my NS but unable to neither my home router nor public wifi.
A few things I have tried.
1. avoid poor wifi disabled.
2. switch chennels to 6 or 8 - tried all.
3. Resetting routers
4. Assigning static IP address
5. Cleared cache from recovery
6. changed the Wi-Fi band from 'Auto' to 2.4Ghz and 5Ghz
7. Flashed new kernel Running franko.
8. Flashed 2 other ROMS/cm10.1 and xylon17 both stable versions.
My home router have not trouble connecting to all other devices at home (NS, HP touchpad, 3 desktop and 3 other laptops, Tried with N4 being the only device that was turned on. : still no go!! WHY WHY WHY WHY WHY!!!
Also followed the directions from this thread. Still no candy.
Please take a poll and let post here if you should find a good solution.
Mine works flawlessly. You should contact Google for a RMA.
Sent from my iPad using Tapatalk HD
I guess its the lease period on your router that you need to change... put it to lease expiring n a day or two... shuld work.. I had this issue when I upgraded to 2.3.6 on my Atrix
krishnabhargavt said:
I guess its the lease period on your router that you need to change... put it to lease expiring n a day or two... shuld work.. I had this issue when I upgraded to 2.3.6 on my Atrix
Click to expand...
Click to collapse
Tried that and also assigned a static ip. No joy!
Thanks for the advice.
americasteam said:
Mine works flawlessly. You should contact Google for a RMA.
Sent from my iPad using Tapatalk HD
Click to expand...
Click to collapse
I just called. This guy treated me like I'm noob. But I digress.. He asked me to turn off GPS and try again saying that GPS and wifi together can not be on at the same time. That still did not work. So there is a request for replacement. Not really sure when I will get it. But keep my finger crossed - that I get a working wifi and gps at the same time ??
Don't really want to return it though since I like the phone form factor and such!
What a shame.
newuser02 said:
I just called. This guy treated me like I'm noob. But I digress.. He asked me to turn off GPS and try again saying that GPS and wifi together can not be on at the same time. That still did not work. So there is a request for replacement. Not really sure when I will get it. But keep my finger crossed - that I get a working wifi and gps at the same time ??
Click to expand...
Click to collapse
Why wouldn't WiFi and GPS work together? I don't see any reason as to why one would interfiere with another
newuser02 said:
I'm sure I'm not alone in this.
My N4 won't connect to wifi. Well it connects but Won't keep a connection to complete a playstore app install nor update the system itself?
This is what I posted on "Issue 40065: Nexus 4 and Nexus 7 Wifi Drops connection Android 4.2"
Also flashed rom CM10.1 stable and xylon 17 stable. Still same problem repeated. both ROMS can connect to my hotspot on my NS but unable to neither my home router nor public wifi.
A few things I have tried.
1. avoid poor wifi disabled.
2. switch chennels to 6 or 8 - tried all.
3. Resetting routers
4. Assigning static IP address
5. Cleared cache from recovery
6. changed the Wi-Fi band from 'Auto' to 2.4Ghz and 5Ghz
7. Flashed new kernel Running franko.
8. Flashed 2 other ROMS/cm10.1 and xylon17 both stable versions.
My home router have not trouble connecting to all other devices at home (NS, HP touchpad, 3 desktop and 3 other laptops, Tried with N4 being the only device that was turned on. : still no go!! WHY WHY WHY WHY WHY!!!
Also followed the directions from this thread. Still no candy.
Please take a poll and let post here if you should find a good solution.
Click to expand...
Click to collapse
You shouldn't be flashing ROMs to try and fix something as basic as this. You're only adding more variables to the problem. My WiFi has been rock solid, and so apparently is that of most other posters. This would tend to indicate that there is a specific problem with your phone.
Unless there is something seriously wrong with your router it's RMA time I reckon.
theabsurdman said:
You shouldn't be flashing ROMs to try and fix something as basic as this.
Click to expand...
Click to collapse
I see your point and I agree.
But after a full day of fiddling with it on stock ROM, what the hell not?
You're only adding more variables to the problem.
Click to expand...
Click to collapse
I sure did! But I also tried a couple of other fixes I have found on the web and on this forum. That did not help either.
My WiFi has been rock solid, and so apparently is that of most other posters. This would tend to indicate that there is a specific problem with your phone.
Unless there is something seriously wrong with your router it's RMA time I reckon.
Click to expand...
Click to collapse
I reckon, I will.
Just to re-iterate .....
Wifi works if I connect to my other nexus S's hot spot.
Wifi will not stay connected to allow me to go to play store on any wifi router (home Encore ENHWI-2AN3 firmware version 1.1.3 - Mcdee's open wifi and [email protected]#'s open wifi router.) It will connect - get a blue wifi icon with a few arrows ..... but will go to gray and back to blue and so on ....
Waiting for google to make up its mind about shipping me a replacement.
:=(
:crying::crying::crying::crying::crying:
You are alone on this.
Now get a refund and buy an iphone.
I have the nexus 10 and the htc droid dna. When I connect them via wireless connection they always disconnect and reconnect. I don't know if this has anything to do with any wireless connection problems from the nexus, but I know I didn't have the problem with the dna as I previously had a different tablet and it worked perfectly fine.
Does anyone know any reasons why it would keep disconnecting? Any input is greatly appreciated
almo40192 said:
I have the nexus 10 and the htc droid dna. When I connect them via wireless connection they always disconnect and reconnect. I don't know if this has anything to do with any wireless connection problems from the nexus, but I know I didn't have the problem with the dna as I previously had a different tablet and it worked perfectly fine.
Does anyone know any reasons why it would keep disconnecting? Any input is greatly appreciated
Click to expand...
Click to collapse
I was having problems keeping my N10 connected to Tablet Talk also. Yesterday I finally thought to check all the wifi settings and my region code was not set. It hasn't kicked me off since.
I couldnt ever get it to work with wifi. Plus dont you have to enter the IP address everytime?
I use bluetooth. Connects quickly and easily. Never disconnects
SayWhat10 said:
I couldnt ever get it to work with wifi. Plus dont you have to enter the IP address everytime?
I use bluetooth. Connects quickly and easily. Never disconnects
Click to expand...
Click to collapse
You only have to put a different ip address when you change networks, otherwise it says for the current.
Also, I try bluetooth and it also disconnects sometimes, less often than wifi though. But where would I change the region code?
Go to wifi and hit advanced settings