Hi,
I checked many threads with no solution so this is last chance
Did someone recover the phone from no charging issues ? Even if this is hardware.
I have mine old G1 and wanted to give it a second life. I noticed that it does not charge when off (no led) and when on (led red >orange, status on the phone "charging"). It only charge in fastboot mode (led off). I got new battery, charger etc.
I saw it is common thing but last posts are like from 2010. Does not help: wipe battery, changing radio, battery or charger.
It is 1,6 superD.
Maybe it cost low to repair if it is hardware. How the hell it can be it charge in fastboot?
I would get along with it if it was bricked but in this case - it works but does not work if you know what I mean.
Ciao
try cleaning out the usb port with like a toothpick and some rubbing alcohal, my guess is its hardware and the pins to charge normally are damaged but the pin to work in fastboot mode are still intact. if this is the reason why its bad you would either need to solder a new port to the daughterboard (really tricky unless you are a master @ fine soldering)
or replace the whole daughterboard. which of course is very hard to find by itself. more than likley you will have to by a broken/used phone off ebay (maybe as cheap as 10 bucks) with a working usb but whatever else broken and swap daughterboards, pretty easy to do.
but maybe double check if its firmware/software first by reflashing new rom or doubtfully a new radio/spl
Sent from my HTC Vision using xda premium
Thanks a lot for the reply.
Indeed buying something with broken screen would do. My soldering capabilities ends on swaping capacitors, far away from micro soldering
Anyway, I tried all other things you have mentioned.
Cheers!
Related
Hey all,
It seems my HTC HD2 is unable to receive any kind of charge. I've used a different usb cable, my roommate's myTouch 4G cable and a friend's HD2 cable, and they all cannot charge my phone as well. My phone doesn't recognize any cable that is being plugged into it. I've made sure I'm in the right USB connection setting, checked the little 3 gold prongs where my battery receives (electricity?) from the phone to make sure those aren't situated in an odd bent position, but alas nothing. Could it do something with the actual part on my HD2 that the cables plug into? Phone is currently dead and I have no phone and am out of warranty. Is it a part I can easily replace?
Thanks for your help!
Edit: It seems the HD2 was launched on March 16 so I'm a couple of days past the 1 year mark fo warranty. Do you think I could persuade tmobile or HTC into replacing my phone even though it this slim out of warranty?
Does your lex still show that the battery is charving when you plug your HD2 up to your charger? If so you may have a faulty battery. If not then it could be a hardware or software problem. I suggest you buy another battery and see if
Nope, the chord isn't even recognized. It's as if nothing is plugged in when in fact something is.
Sounds like a broken microUSB port. Unnless you have a warranty, you're out of luck. To replace the port, you'd need a whole new mainboard.
Yes if your HD2 is not recognizing the USB cable then yes it sounds like you have a bad mini USB port on your HD2. You can try a hard reset if you want to but make sure to back up all your personal information first, but I kinda doubt it will do you any good to hard reset. You will have to get the main board replaced if this is your issue, wi h I believe it is. You can either find a cell phone repair shop or do it yourzlc ic you feel comfortable enough doing it. replacing the mainboard requires no soldering as all the ribbons just plug in. You just need to be gental with everything as you are working on it.
Now to get you by until you can either fix the phone or just to be abale to harvesting the battery for day to day use. You can by a external charger. Or you can take a old USB cable or buy a cheap USB cable and cut the end off of it. Strip it back a little and the zrip back the red and black wires a little. With a little tape attack the red wire to the positive(+) battery terminal and the black wire to the negative (-) battery terminal. Then plug the cable into your wall charger, don't worry the oltage comming out the wires is very low and will not hurt you, in fact you can not even feel it. They are marked on the battery. I do suggest just using this as a very temporary fix until you can vet an external charger or get your HD2 fixed as I do not know if this may be detramental to your battery with long term use. Also I give credit to Senior Member Samsamuel for this idea as he is the one I learned it from.
I contacted HTC and they confirmed the phone is still under warranty. The problem is I'm running CM7 on my phone so I'm asssuming when they start it up and view I have a 3rd party ROM, they'll void my warranty. I would rather fix it myself personally but I don't know anything nor do I really want to touch/pay for a new mainboard. But if my phone does get it's warranty voided, I'll have to pay either way. I think I might just go ahead and buy an external battery charger until i figure out what to do
axyrus said:
Hey all,
It seems my HTC HD2 is unable to receive any kind of charge.
<snip>
Phone is currently dead
Click to expand...
Click to collapse
axyrus said:
The problem is I'm running CM7 on my phone
Click to expand...
Click to collapse
magldr wont let battery charge when phone is off.
No fault with phone, dead battery and user error.
Use another hd2 that isnt running magldr to charg ebattery, OR use friends battery to flash to winmo and use winmo to charge battery, OR take an old usb cable, mini or micro, cut end off, find red and black wires, connect red to + black to - on the battery (the markings are on there faintly) and plug in to wall charger for a half minute or so then try start phone with real usb cable plugged in. should be enough charge to boot far enough into android for the charging to start. If nothing at all happens, then maybe there is really a problem.
You can hold the wires on by hand, you wont feel it, or i used tape.
axyrus said:
I contacted HTC and they confirmed the phone is still under warranty. The problem is I'm running CM7 on my phone so I'm asssuming when they start it up and view I have a 3rd party ROM, they'll void my warranty. I would rather fix it myself personally but I don't know anything nor do I really want to touch/pay for a new mainboard. But if my phone does get it's warranty voided, I'll have to pay either way. I think I might just go ahead and buy an external battery charger until i figure out what to do
Click to expand...
Click to collapse
Which HD2 (model number) do you have and which provider did you buy yours from?
rr5678 said:
Which HD2 (model number) do you have and which provider did you buy yours from?
Click to expand...
Click to collapse
I have the USA HD2 from TMobile
axyrus said:
I have the USA HD2 from TMobile
Click to expand...
Click to collapse
http://dl.htc.com/ruudownload/t-mobileUS/Filedownload.aspx?pid=leo2
stock ROM. download it, extract the .NBH from the .exe, stick the .NBH on the SD card and rename it to LEOIMG. Hold volume down + power when the phone is off.
may i repeat, just to confirm you considered this before you go about getting it repaired,, , if the battery is flat and magldr is installed, the phone wont charge.nothing will happen when you plug in usb.
Hello,
I don't know if it is the right place to post, but because I think my problem has to do with the software.
A few weeks ago, my HTC touch HD stopped being charged when it was on. No signs that USB was connected, nor with the computer or the charger. Still though it would charge when the phone was off, so I postponed to fix it back then. When I tried to change the ROM to the latest one(this is the ROM I have installed http://forum.xda-developers.com/showthread.php?t=809477), I couldn't and even after I connected the USB the screen kept showing "serial". Things are getting worse, now it shuts down without any alerts, especially when I watch youtube videos or browse the internet...
What do you think is the problem and what should I do? Can the device be fixed? I dont want to lose my beloved Blackstone
Thanks in advance!
the blackstone usb port is a known weak spot, maybe it really just quit on you and you should replace the mainboard. another possibility would be that the phone is fine and the battery is broken. the easiest way to tell which one it is would be to charge the battery directly in a docking station or external wall charger or get a new battery for it and try and charge it in the phone, see if it behaves any differently than your phone does now. if you are lucky, you can get your hands on either one from a store with a good return policy, so if that does not do the trick, you can return it as used only once and get your money back.
sadly, if this didn't help, you might want to say goodbye to your beloved blackstone, because replacing the mainboard is a lot of work and might become quite pricey for a device that is hardly worth 100eur these days.
Chef_Tony said:
the blackstone usb port is a known weak spot, maybe it really just quit on you and you should replace the mainboard. another possibility would be that the phone is fine and the battery is broken. the easiest way to tell which one it is would be to charge the battery directly in a docking station or external wall charger or get a new battery for it and try and charge it in the phone, see if it behaves any differently than your phone does now. if you are lucky, you can get your hands on either one from a store with a good return policy, so if that does not do the trick, you can return it as used only once and get your money back.
sadly, if this didn't help, you might want to say goodbye to your beloved blackstone, because replacing the mainboard is a lot of work and might become quite pricey for a device that is hardly worth 100eur these days.
Click to expand...
Click to collapse
Thanks for your answer!
I person I know has a working blackstone and I will ask him to lend me the battery. I am not good at soldering and I wouldn't bother with changing the board at all.
I cross my fingers and hope it works, because I loved this phone so far, it could do anything...
Got the battery from that guy, tested the phone and still it wont charge...
too bad, then probably your usb port and/or mainboard is fried. if you want to hold on to the phone, get an external charger, like a docking station with 2nd battery charger, kinda like this (not this exact one obviously, as it is for the galaxy s2): http://www.ebay.com/itm/Dual-Sync-C...AU_MobilePhoneAccessories&hash=item2a16087f53
or a direct battery charger like this one: http://www.ebay.com/itm/2x-1530-bat...AU_MobilePhoneAccessories&hash=item3cbebda52d
Once again thanks, but I have already have made my plans!
The phone itself is far from broken, so I am going to make it an entertainment device, for home use. No battery. Just a 3.7 DC transformer, acting like a battery. For the move, a simple nokia dumphone does the work!
Going to get back on you when I complete the project.
Hey all,
I have a Galaxy Nexus which recently started to act up on his USB port saying it's constantly connecting /disconnecting to the charger with no cable present.
Device: Samsung Galaxy Nexus
Edition: Maguro GSM
OS: CM10.2 nightly + CM11 Alfa
Chargers: OEM, generic, battery & laptop
Cables: OEM & generic
Reproduceable: sometimes
This week I noticed my phone did not react immediately when I plugged it into the charger. Mostly after some fiddling (bending the cable away from the screen) it would start charging. After pulling the cable or removing the charger from the wall, it would generally take 5 to 10 sec for the phone to realize I pulled it- this used to be instantly.
Strangely, when the phone said it cannot charge it can be connected to a computer as Media Device without any problem. Charging only happens after the fiddling again.
Looking into BBS, it cannot give any stats because it says the device is connected constantly to a charger. Android original battery monitor stats are also a mess but it does not say I am connected always.
Every now and again the phone also starts making notifications as if he was constantly connecting and disconnecting - leading to frustrated looks of the people on my train...
Cleaned out the port - no success
Hit it on the train table - no success
Reset, battery pull, flash, different OS - no success
After this all I think it will be a hardware issue. Nothing seems bent and no pins seem to be sticking out. Removing the back and checking the mother board showed everything still intact and all connectors still in place.
I'm guessing now the micro USB connector of the phone has somewhere some corrosion or a pin out of place but not visible to the untrained eye.
Can someone shed some light please?
2 screenshots to show you what I mean.
No, I am not up for 9 hours and lost only 10%... Battery life has become horrible since this issue. It just thinks it's constantly hooked up to a power source and I think it's no longer power efficient because of this. I already disabled charge connection sound because it was driving me crazy ...
Please help if you know even half a solution. I can also post a photo of the connector but the problem is that there's not much to see there...
I think you have problem with charging circuit >>if you have solid knowledge in electronics you can simply replace it
replacing this port in attached pic will solve your problem .... otherwise you can fix your own port because I think one of your USB port pin are touching the ground chase of your motherbord
Thanks for the reply. Somewhat saw it coming I would have to replace something...
I already looked on some sites like ifixit to see what I could do but I thought to have seen that the Motherboard was in one big piece.
Could you please give me the website where you found this or the name /article code of this component?
Thank you
sigixv said:
Thanks for the reply. Somewhat saw it coming I would have to replace something...
I already looked on some sites like ifixit to see what I could do but I thought to have seen that the Motherboard was in one big piece.
Could you please give me the website where you found this or the name /article code of this component?
Thank you
Click to expand...
Click to collapse
try to follow the steps on the link it is very helpful http://www.ifixit.com/Guide/Repairing+Samsung+Galaxy+Nexus+(Verizon+LTE)+Micro+USB+Charge+Port+%26+Main+Mic/9641
and you have nothing to do with the motherboard just take the old charging port and install the new one
Ordered a new part. Hopefully it'll work...
Hi so I bought the device about 3 months ago and it was awesome from the get go everything was great until today when i plugged in my device for charging. After a while i noticed it was charging very slowly so i instinctively disconnected and reconnected the type a usb cable from the charger. On reconnecting there was no indication of charging on my phone. I reconnected it one more time and nothing. So i took out my voltmeter and connected that in series. The moment i connected it it started to restart continuously. On off on off and i had to disconnect it to make it stop. I thought it might be a cable issue so i tried a micro usb cable with an adapter. Same result. Then i switched chargers, again same result. Whenever i disconnected the phone it would stop restarting. On one charger it did stay on but the voltage dropped to 3 volts and amps up to 2.3.
So i have concluded from above stated facts that the charging port/ board is kaput. If anyone has any suggestions on this please let me know.
After this i started to search for a replacement type c charging board for the redmi pro but i cant find any. Any help in finding one with international shipping would be appreciated.
Please leave Ur thoughts on my conclusion.
replace your usb c cable
Thx. But luckily i was able to repair it. Woohoo
Anyone know where to get a replacement usb charging pcb ?
was it a easy fix or did you replace the usb board?
spawnx3m said:
Anyone know where to get a replacement usb charging pcb ?
Click to expand...
Click to collapse
Sorry for the late reply. I searched for the port on various websites when i had the issue but couldnt find anyone who sold redmi pro parts. Luckily however i found a seller on ALIEXPRESS who said that he did have it. He had asked me to pay using mi max charging board which was around 7 usd and then he would send The redmi pro charging board.
Sadly i cant find the seller who said this so i cant share the link here.
What u could do is go on aliexpress, find the largeat stores with the widest variety of xiaomi charging boards and ask them if they have it.
hejhop said:
was it a easy fix or did you replace the usb board?
Click to expand...
Click to collapse
For me it realy was an easy fix and fast one too.
I was out of option at the time so what i thought of was that if i could find a 4 or 5 amp usb brick i could probably melt the shorted portion of the circuit. Ofcourse that in itself is dangerous because it could ruin the phone completely.
Anyways sadly i could not find any such power bricks. When i had almost lost all hope i thought of trying this out in my cars charger because car is already running on a DC system and is capable of providing alot of current to the usb charger, which is just a sort of regulated stepdown transformer. So hopefully that would provide the power i need. I started the car and then connected the phone. The moment i connected the phone to the charger the cars rpm lowered slightly for a second as if it were under stress and then went back to idle. AND MAGIC! It was fixed.
What it did was provide alot of current to the phone which heated and melted the shorted circuit. Since then ive had no issue with the phone.
It might be different for u though so i wouldnt recommend just doing what i did. If u have waranty claim that. If u r out of all options and u feel like ur phone is a dead piece of metal (like i did) then go ahead. But do not hold the phone in ur hand or anything while doing so because it can be dangerous in a number of ways. DC is much more unforgiving then AC.
Hope this helps.
I-AM-LEGEND said:
For me it realy was an easy fix and fast one too.
I was out of option at the time so what i thought of was that if i could find a 4 or 5 amp usb brick i could probably melt the shorted portion of the circuit. Ofcourse that in itself is dangerous because it could ruin the phone completely.
Anyways sadly i could not find any such power bricks. When i had almost lost all hope i thought of trying this out in my cars charger because car is already running on a DC system and is capable of providing alot of current to the usb charger, which is just a sort of regulated stepdown transformer. So hopefully that would provide the power i need. I started the car and then connected the phone. The moment i connected the phone to the charger the cars rpm lowered slightly for a second as if it were under stress and then went back to idle. AND MAGIC! It was fixed.
What it did was provide alot of current to the phone which heated and melted the shorted circuit. Since then ive had no issue with the phone.
It might be different for u though so i wouldnt recommend just doing what i did. If u have waranty claim that. If u r out of all options and u feel like ur phone is a dead piece of metal (like i did) then go ahead. But do not hold the phone in ur hand or anything while doing so because it can be dangerous in a number of ways. DC is much more unforgiving then AC.
Hope this helps.
Click to expand...
Click to collapse
are u serious? please help me, i have same problem :"
So I have been running AICP 13.0 for a couple weeks and love it. I woke up this morning and my phone didn't charge overnight despite being plugged in. It shows it is connected (the lighting bolt in the battery icon on the top right) but the led light doesnt display and it doesnt say charging. Other weird thing is everytime I plug the cord in the volumne starts adjusting itself up and down automatically and now sound is not working (microphone or speaker audio). Battery is now draining and I cant get it to charge. Any ideas why this could be? I have tried it with numerous cords and charging bricks, did a factory reset but still can't get it to work. I am now down to 20 percent battery life and am worried I have a hardware problem and am going to be without a phone for a couple days.
Anyone experience similar things or have ideas to try?
Also leeco doesnt have a us website anymore, so how do I contact them for support if needed?
Only idea a hardreset or clear coch?
Sent from my LEX720 using xda premium
Well, go back to any eUI vendor ROM (basically, stock) and see if it solves the issue. Preferably the same firmware version that your device was originally on. It could be a hardware issue or a software issue.
Sounds like a faulty charging port. You might need to replace yours. You can find replacement charging ports on Aliexpress, and a teardown here: http://www.myfixguide.com/manual/leeco-le-pro-3-teardown/ (the phone has the same internals as other LeEco phones, so you can consult various LeEco teardown videos too).
EDIT: now, I don't know if this will work for you, but freezing the phone for an hour might also get it to start charging again, but only do this as a last resort if it dies on you. And make sure you put it in a plastic bag first (obviously).
Ok I will locate the stock rom and flash it, I havent looked for it but it has to be on xda.
As far as replacing the charging port....I bought the phone in June so it should be under warranty correct? Does anyone know how we would get in touch with leeco support? Do we still have a warranty since they shut down operations in the US?
I still have 16 percent battery (I turned it off once I posted here so I could have juice to try ideas you guys would come up with, so hopefully I dont have to try the freezer trick.
sk8223 said:
Well, go back to any eUI vendor ROM (basically, stock) and see if it solves the issue. Preferably the same firmware version that your device was originally on. It could be a hardware issue or a software issue.
Sounds like a faulty charging port. You might need to replace yours. You can find replacement charging ports on Aliexpress, and a teardown here: http://www.myfixguide.com/manual/leeco-le-pro-3-teardown/ (the phone has the same internals as other LeEco phones, so you can consult various LeEco teardown videos too).
EDIT: now, I don't know if this will work for you, but freezing the phone for an hour might also get it to start charging again, but only do this as a last resort if it dies on you. And make sure you put it in a plastic bag first (obviously).
Click to expand...
Click to collapse
Have you tried a different lead? I've had one leeco lead go on me, i almost chucked the charger until i realised it was the lead
Ymm, often the cable is broken.
Yes I have tried numerous cables and chargers. It has to be a hardware issue as it is dead now and won't charge at all is my thinking. When I plug a charging cord in it displays several quick red led blinks where it usually has the yellow led for charging but nothing else. When I tried it with my car charger this morning it got really hot very quickly.
jongordo8 said:
Yes I have tried numerous cables and chargers. It has to be a hardware issue as it is dead now and won't charge at all is my thinking. When I plug a charging cord in it displays several quick red led blinks where it usually has the yellow led for charging but nothing else. When I tried it with my car charger this morning it got really hot very quickly.
Click to expand...
Click to collapse
Sadly, the stock charger cable is known to destroy the charge port. If you have always used the stock charger cable, then that is probably what caused the issue . I had to get my phone replaced for that reason about a year ago. If you do end up getting it fixed, get a certified USB-C cable and scrap the one that came with the phone. So sorry man...you shouldn't have to deal with this.