I Have Apprently Wreckened My Cable Can Sumone Help Me fix It??
Blizzrar posted this manual, haven't tried it myself but it might help.
lol its a easy job i changed mines 2 weeks ago
Related
Hello all,
Many moons ago I dropped my xda one to many times and damaged the pins in the connector.
I have seen a few similar posts regarding this, and O2s response is to generally replace the entire motherboard.
I finally got around to it, I pulled off the broken connector and soldered on a usb connector.
With great thanks to xda-developers.com, I deduced the pin layout drew up a plan and tried to do the soldering only to find it was too small for me. I took it to an electronics engineer and he did it for me to my specs and low and behold it worked perfectly.
w00 h00!
Stephan Neofitou
Finally....someone did it .....
Great work Stephan...u gave me the courage to continue with my project(i'll post it later IF it succeded),since the Himalaya and the BlueAngel connectors are the same as for the Wallaby...
Once again Stephan,thanx for doing what people may know,but no one dare to do
Cheers...
RAGO :lol:
Finally....someone did it .....
Great work Stephan...u gave me the courage to continue with my project(i'll post it later IF it succeded),since the Himalaya and the BlueAngel connectors are the same as for the Wallaby...
Once again Stephan,thanx for doing what people may know,but no one dare to do
Cheers...
RAGO :lol:
No Probs
Good to hear! 8)
I am so happy to have my wallaby back!
I was glad we managed to secure the usb connector on the mb by the rear two lugs on the connector, it seems pretty solid. its a shame it sticks out about 5mm from the phone.
This weekend I will open it back up and take some better pics with my own camera, the above (taken with works camera) are pretty cruddy.
I think o2 had the right idea with the usb cable on the mini, 24 pins over 15mm is just too fine and delicate for something that gets thrown around so much.
Cheers!
Charging
Hi Folks,
Any idea does this charge the phone as well ???
HW
nice work
a have a nice colection of many models of mda
tonight i will modify a walaby just for fun
...i wiil try to test on other models to
nenmobil
neofitou said:
Hello all,
Many moons ago I dropped my xda one to many times and damaged the pins in the connector.
I have seen a few similar posts regarding this, and O2s response is to generally replace the entire motherboard.
I finally got around to it, I pulled off the broken connector and soldered on a usb connector.
With great thanks to xda-developers.com, I deduced the pin layout drew up a plan and tried to do the soldering only to find it was too small for me. I took it to an electronics engineer and he did it for me to my specs and low and behold it worked perfectly.
Well done Steven, I also need to ask , does this mod also charge the phone?
I have a dislodged serial connector and looking for an easy fix, do you know if a GPS receiver will also work?
I also noticed the rear connector looks like it routes through the serial connector pins, does anyone know if this socket can be used to charge and sinc the phone.
Click to expand...
Click to collapse
Yes it charges the phone
Yes it charges the phone thats why there is two power lines.
I dropped my phone a few days ago and broke the lcd, only every second vertical line on about half the lcd is working now. Getting an Eten next week
the images seem to be missing from the original post, I will attache them again now if I can find them....yep
[edit] looks like its just the thumnails that arent working atm, clicking on the images does work.
mad props to you! i like to see good hardware mods like this!
USB Connestor
U could use miniUSB connector ( like in mp3 players )
help
hi,
I am only 13 years old but i have been trying to fix my xda II for ages.
I was wondering if anybody could give me a detailed way to solder a usb connector. I have lost the 22 pin connector. So i need as much help as possible.
Thanks for reading
o2 xda2
hi guys...
can any one help me . my o2 xda2 usb port damaged. please get me the alternative point for pin 14 and 15 on o2 xda2 pcb board . also get me the pcb diagram for it if possible.........
thanx a lot
it seems like the Images dont work anymore
Could you please reupload them again, because i would like to try that mod.
Thank a lot
cu
Fry
Images don't work
Please upload the images again
missing pictures
neofitou said:
Yes it charges the phone thats why there is two power lines.
I dropped my phone a few days ago and broke the lcd, only every second vertical line on about half the lcd is working now. Getting an Eten next week
the images seem to be missing from the original post, I will attache them again now if I can find them....yep
[edit] looks like its just the thumnails that arent working atm, clicking on the images does work.
Click to expand...
Click to collapse
Can you please post the pictures again.
As the Himalaya has got the same connector it is still a problem to users and we would appreciate your help.
pls reupload too
Can it be used any other connector instead miniUSB? It's ugly to see big phone with a little connector that sneaks out like a slime!!! =)
Hello everyone, I wanted to ask if there is an alternative to pins 14 and 15 for the usb. thanks
as far as i know there isn't. But instead to use usb u can use serial port!
Just Smashed my mini USB Socket for My HTC P3600
Can any one tell me where to buy a new one?
I already took it out it have 11 Pins .
Thanks for the Help
get it from PPCTech. Link here
Thanks but they dont have this
Any Help ???
How did you do that if i might ask .
cheers
Fluke 100% normal use
Except for 1 Time in inserted the Cable without looking
Upside down then I did try to fix it but it only got from bad to
Totally smashed.
tariko said:
Fluke 100% normal use
Except for 1 Time in inserted the Cable without looking
Upside down then I did try to fix it but it only got from bad to
Totally smashed.
Click to expand...
Click to collapse
Real bad, hope you get it fixed soon
Cheers
Hello!
Is the NEON300 flex cable the same for a NIKI 100 flex cable??
Ie, can i use
http://cgi.ebay.com/HTC-TOUCH-DUAL-NEON-300-FLEX-CABLE-REPAIR-LCD-SCREEN-US_W0QQitemZ350203005779QQcmdZViewItemQQptZPDA_Accessories?hash=item5189b9cb53&_trksid=p3286.c0.m14&_trkparms=65:12|66:2|39:1|72:1205|240:1318|301:1|293:1|294:50#ShippingPayment
on my niki100?
Cheers!
Palitu
Don't know about that cable, but this cable should work for sure. For whatever it's worth after 2 weeks
yeah i bought the one from the first post.
It arrived yesterday and it works!
my phone was more or less unusable, now back to great again!
cheers for the reply
Palitu
Good to hear that it's working again
HI all, I bought my HD2 just over a month ago on Ebay.. love the phone but just 2 days ago the screen started to become unresponsive.. I got angry pretty quick as I just spent $150 on this phone last month, I found a temporary fix which was just press the red end call button very hard to get my screen working again, it works but sometimes I have to do this 2-3 times a day and it just reminds me that this is only temporary and I should do something about it. My phone is out of warranty so and I found the flex ribbon cable very cheap on Ebay. However, I've NEVER repaired a phone befor. I can not for the life of me find a tutorial on how to fix the flex cable ribbon at all. I searched XDA but also could not find a tutorial on how to replace the flex cable ribbon, I believe I read that it wasn't that hard so I'm not too intimidated. I will also purchase the tools needed to do this on Ebay.
But does anyone know of a tutorial on how to replace the flex cable ribbon? Keep in mind I've never repaired a phone befor or anything really. I don't think it will be that hard if I have some pictures or a video though. If you could PLEASE help me I will be internally grateful as my only other option is to buy a new phone and I'm in a terrible position to do so at the moment. Thank you
Your problem is digitizer & cable to LCD.
Digitizer is not that expensive & comes with cable as not separable.
For someone with no experience the HD2 can be hard to repair.
First you need to know what version LCD DIGI you have as have a clip socket version or solder version.
Loads of info & tutorials on XDA & many sad tales of more problems caused during the repair.
You may be better selling as is for repair but if decide to try yourself read up & ask first rather than after & take extreme care ...
i bought my tab like 1 month ago and in the second day i bought it my cat droped it down from the desk to the floor breaking the digitizer i gave it to the company to replace it and i waited 1 month and they told me that they coudn't find the replacement part when i got home i but it to charge but nothing happent called them asked them if they had opend it nope they havn't then i opend it i found the usb power cable was cutt off if any one has picture on how it was or has the layout of the cable to the micro usb could u please show it to me so i can fix it and i can send pictures so other need to open and fix it know how thanks
... What?
ahmedoso said:
i bought my tab like 1 month ago, and in the second day i bought it my cat droped it down from the desk to the floor, breaking the digitizer.
I gave it to the company to replace it, and i waited 1 month, and they told me that they coudn't find the replacement part. when it got home i put it to charge but nothing happend.
Called them asked them if they had opend it. nope they havn't then i opend it.
i found the usb power cable was cutt off.
if any one has picture on how it was or has the layout of the cable to the micro usb, could u please show it to me so i can fix it and i can send pictures so other need to open and fix it know how thanks
Click to expand...
Click to collapse
The last paragraph is beyond my repair powerz.
I think he needs a new USB cable.
I didn't catch a word of that.
Use punctuation if you want help because otherwise we don't have a clue what your on about
mcosmin222 said:
The last paragraph is beyond my repair powerz.
I think he needs a new USB cable.
Click to expand...
Click to collapse
i bought another ribbon cable with 22 pins and while soldering it to the board of the usb the solder on it made bridges in some places and other places the solder came out it and dosn't adhere to the board any more so i am asking for the layout of the board so i can directly solder the ribbon cable to the micro usb pins
ahmedoso said:
i bought another ribbon cable with 22 pins and while soldering it to the board of the usb the solder on it made bridges in some places and other places the solder came out it and dosn't adhere to the board any more so i am asking for the layout of the board so i can directly solder the ribbon cable to the micro usb pins
Click to expand...
Click to collapse
You do realize those plans are secret, right?
SixSixSevenSeven said:
I didn't catch a word of that.
Use punctuation if you want help because otherwise we don't have a clue what your on about
Click to expand...
Click to collapse
all i want to say is that inside the tab the ribbon cable connecting from the micro usb to the board was cut off and it must be soldered to the micro usb pins i need to know which of them is the data + and data - and the ground i already know the vcc and i think i got the ground right other than that i am in total mess thanks for replaying and srry for my english
mcosmin222 said:
You do realize those plans are secret, right?
Click to expand...
Click to collapse
not a single clue they are and if they had good guys that can fix it in egypt i have no proplem the thing is i had it only for 1 day frastration has got into me
/If/ (and that's a big if) it's a single layer board (which I really doubt) you can follow the traces from the pads to whatever. Else, I doubt you'll be able to get it fixed.
netham45 said:
/If/ (and that's a big if) it's a single layer board (which I really doubt) you can follow the traces from the pads to whatever. Else, I doubt you'll be able to get it fixed.
Click to expand...
Click to collapse
nope it is not single layer ,But i can fix it if just anyone told me the voltage of them
i do thank you for wanting to help And srry for missing your replay up just saw it now
What a mess.... lol i can only say that ....
tell me about it