Hello!
Is the NEON300 flex cable the same for a NIKI 100 flex cable??
Ie, can i use
http://cgi.ebay.com/HTC-TOUCH-DUAL-NEON-300-FLEX-CABLE-REPAIR-LCD-SCREEN-US_W0QQitemZ350203005779QQcmdZViewItemQQptZPDA_Accessories?hash=item5189b9cb53&_trksid=p3286.c0.m14&_trkparms=65:12|66:2|39:1|72:1205|240:1318|301:1|293:1|294:50#ShippingPayment
on my niki100?
Cheers!
Palitu
Don't know about that cable, but this cable should work for sure. For whatever it's worth after 2 weeks
yeah i bought the one from the first post.
It arrived yesterday and it works!
my phone was more or less unusable, now back to great again!
cheers for the reply
Palitu
Good to hear that it's working again
Related
Hello all,
Many moons ago I dropped my xda one to many times and damaged the pins in the connector.
I have seen a few similar posts regarding this, and O2s response is to generally replace the entire motherboard.
I finally got around to it, I pulled off the broken connector and soldered on a usb connector.
With great thanks to xda-developers.com, I deduced the pin layout drew up a plan and tried to do the soldering only to find it was too small for me. I took it to an electronics engineer and he did it for me to my specs and low and behold it worked perfectly.
w00 h00!
Stephan Neofitou
Finally....someone did it .....
Great work Stephan...u gave me the courage to continue with my project(i'll post it later IF it succeded),since the Himalaya and the BlueAngel connectors are the same as for the Wallaby...
Once again Stephan,thanx for doing what people may know,but no one dare to do
Cheers...
RAGO :lol:
Finally....someone did it .....
Great work Stephan...u gave me the courage to continue with my project(i'll post it later IF it succeded),since the Himalaya and the BlueAngel connectors are the same as for the Wallaby...
Once again Stephan,thanx for doing what people may know,but no one dare to do
Cheers...
RAGO :lol:
No Probs
Good to hear! 8)
I am so happy to have my wallaby back!
I was glad we managed to secure the usb connector on the mb by the rear two lugs on the connector, it seems pretty solid. its a shame it sticks out about 5mm from the phone.
This weekend I will open it back up and take some better pics with my own camera, the above (taken with works camera) are pretty cruddy.
I think o2 had the right idea with the usb cable on the mini, 24 pins over 15mm is just too fine and delicate for something that gets thrown around so much.
Cheers!
Charging
Hi Folks,
Any idea does this charge the phone as well ???
HW
nice work
a have a nice colection of many models of mda
tonight i will modify a walaby just for fun
...i wiil try to test on other models to
nenmobil
neofitou said:
Hello all,
Many moons ago I dropped my xda one to many times and damaged the pins in the connector.
I have seen a few similar posts regarding this, and O2s response is to generally replace the entire motherboard.
I finally got around to it, I pulled off the broken connector and soldered on a usb connector.
With great thanks to xda-developers.com, I deduced the pin layout drew up a plan and tried to do the soldering only to find it was too small for me. I took it to an electronics engineer and he did it for me to my specs and low and behold it worked perfectly.
Well done Steven, I also need to ask , does this mod also charge the phone?
I have a dislodged serial connector and looking for an easy fix, do you know if a GPS receiver will also work?
I also noticed the rear connector looks like it routes through the serial connector pins, does anyone know if this socket can be used to charge and sinc the phone.
Click to expand...
Click to collapse
Yes it charges the phone
Yes it charges the phone thats why there is two power lines.
I dropped my phone a few days ago and broke the lcd, only every second vertical line on about half the lcd is working now. Getting an Eten next week
the images seem to be missing from the original post, I will attache them again now if I can find them....yep
[edit] looks like its just the thumnails that arent working atm, clicking on the images does work.
mad props to you! i like to see good hardware mods like this!
USB Connestor
U could use miniUSB connector ( like in mp3 players )
help
hi,
I am only 13 years old but i have been trying to fix my xda II for ages.
I was wondering if anybody could give me a detailed way to solder a usb connector. I have lost the 22 pin connector. So i need as much help as possible.
Thanks for reading
o2 xda2
hi guys...
can any one help me . my o2 xda2 usb port damaged. please get me the alternative point for pin 14 and 15 on o2 xda2 pcb board . also get me the pcb diagram for it if possible.........
thanx a lot
it seems like the Images dont work anymore
Could you please reupload them again, because i would like to try that mod.
Thank a lot
cu
Fry
Images don't work
Please upload the images again
missing pictures
neofitou said:
Yes it charges the phone thats why there is two power lines.
I dropped my phone a few days ago and broke the lcd, only every second vertical line on about half the lcd is working now. Getting an Eten next week
the images seem to be missing from the original post, I will attache them again now if I can find them....yep
[edit] looks like its just the thumnails that arent working atm, clicking on the images does work.
Click to expand...
Click to collapse
Can you please post the pictures again.
As the Himalaya has got the same connector it is still a problem to users and we would appreciate your help.
pls reupload too
Can it be used any other connector instead miniUSB? It's ugly to see big phone with a little connector that sneaks out like a slime!!! =)
Hello everyone, I wanted to ask if there is an alternative to pins 14 and 15 for the usb. thanks
as far as i know there isn't. But instead to use usb u can use serial port!
Good morning,does anyone have any ideas on the following problem,on the bottom of my xda2 where the power plug goes into/docking station,it seems to sort of disapeared? just a big hole,and now i cannot charge it whilst driving or whilst docked unless i take battery out and charge in the aux slot.
Not sure what to do,is my xda2 now useless,any idea where i can get it repaired and the cost
thanks for any help offered
Nige
I sell the connectors on ebay - unless you are fairly confident with a soldering iron I'd get a mobile phone repair shop to do it for you. You may also have damaged other componants on the board when the socket was pushed up.
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=5869809646
Richard
the connector is no longer available on ebay, any chance of updating link if is still available please
Can u sell me this connector?
Can u sell me this connector? I have Himalaya and I have broken synchro connector and I can't charge my MDA.And I have just one question, do someone have some manual, how I fixed this connector tu my MDA?Thank's a lot
nigelfish said:
Good morning,does anyone have any ideas on the following problem,on the bottom of my xda2 where the power plug goes into/docking station,it seems to sort of disapeared? just a big hole,and now i cannot charge it whilst driving or whilst docked unless i take battery out and charge in the aux slot.
Not sure what to do,is my xda2 now useless,any idea where i can get it repaired and the cost
thanks for any help offered
Nige
Click to expand...
Click to collapse
in ali mall upper ground floor cubao philippines, it cost me php780 for the fix. It was soldered back. The shop's name is brightpoint.
i have a similar problem, the bottom connector dropped out the other day a i need a new connector because all the pins are bent, does anyone know were i can get a connector from, i glued it back in place as a temporary solution, it worked fine until this morning and now it won't charge , so any help would be greatly appreciated
scotty
XDA II Damaged connection slot
Hi all,
I had the same problem with my XDA II, sent it for repair and it did exactly the same shortly afterwards, i bought a new battery and charged each one alternatively, but found problems syncronising and eventually gave up.
I have recently bought (my little gem) Xda Orbit, after many months examining what was on offer, I love it its is everything i expected and just a little more. Purchased a 2 Gig memory card and installed copilot on so i have sat nav and all my tunes. needless to say i have a spare Xda II up for offer for spares and such should anyone want to get in touch with me.
there is the Cradle and power charger, 2 batteries and it works well just as long as you dont want to connect it to your pc, anyway im new to this site, would be pleased if someone could point me in the right direction for Orbits here and please feel free to contact me, even if just for a chat and introduction. need to get established here.
cheers all, have fun and hopefully speak soon
Hi guys , i am PDA Technician , and i can sell and solder the connector to the XDA board perfectly , I am in Egypt Cairo
Tel : +20123382923
E-mail: [email protected]
Jimmy
you can find the connector here (it is the same type of IPAQ38xx)
http://www.ipaqrepair.co.uk/ipaqpart204.html
not very cheap, however.
thanks, recently aquired another xdaII, broken screen, sd card slot not functioning and a few other problems so i have taken it apart and i am using it as spares for my other,almost perfect, xdaII. so i now have the connector the connector, but thanks for the help and advice.
scotty
Scotty2690 said:
thanks, recently aquired another xdaII, broken screen, sd card slot not functioning and a few other problems so i have taken it apart and i am using it as spares for my other,almost perfect, xdaII. so i now have the connector the connector, but thanks for the help and advice.
scotty
Click to expand...
Click to collapse
these people sell the connector at a reasonable price
http://cgi.ebay.co.uk/NEW-O2-XDA-II...ryZ41343QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
Just Smashed my mini USB Socket for My HTC P3600
Can any one tell me where to buy a new one?
I already took it out it have 11 Pins .
Thanks for the Help
get it from PPCTech. Link here
Thanks but they dont have this
Any Help ???
How did you do that if i might ask .
cheers
Fluke 100% normal use
Except for 1 Time in inserted the Cable without looking
Upside down then I did try to fix it but it only got from bad to
Totally smashed.
tariko said:
Fluke 100% normal use
Except for 1 Time in inserted the Cable without looking
Upside down then I did try to fix it but it only got from bad to
Totally smashed.
Click to expand...
Click to collapse
Real bad, hope you get it fixed soon
Cheers
Hey guys, I need the ribbon cable for an 8525, I actually need 2 of them because I severed one, and then I severed the replacement from another phone that I bought. At first, I bought a ribbon cable from cnn.cn but it doesn't work for some reason, it just shows a white screen no matter what. I swapped my phones board into another persons phone and it worked fine, I put theirs in mine with the cnn.cn ribbon cable, and same thing, white screen. So, does anyone have a broken 8525 in which the ribbon cable is still in tact and not water damaged? If so, please let me know, I would like to buy it off of you, or, does anyone know where I can buy a ribbon cable that will work? Thanks!
theres many ribbon cables - please specify
Have you tested different front keyboard circuit board? I mean this part: http://cnn.cn/shop/tytnsoftbank-x01ht-front-keyboard-p-1553.html ?
I had the fading to white problem and it was fixed with that(there are a lot of faulty front KB switchboards around)..
You can also try a solution found here: http://forum.xda-developers.com/showthread.php?t=303872&page=8 post #78 -it might help you.
Neverwork said:
theres many ribbon cables - please specify
Click to expand...
Click to collapse
The one that goes from the LCD to the mainboard.
Yes I have tried, it's no the white screen problem, the ribbon itself is the problem, I took the ribbon out of anther phone and tried it with the front keyboard thats in my phone, worked perfectly....
myztikal47 said:
Hey guys, I need the ribbon cable for an 8525, I actually need 2 of them because I severed one, and then I severed the replacement from another phone that I bought. At first, I bought a ribbon cable from cnn.cn but it doesn't work for some reason, it just shows a white screen no matter what. I swapped my phones board into another persons phone and it worked fine, I put theirs in mine with the cnn.cn ribbon cable, and same thing, white screen. So, does anyone have a broken 8525 in which the ribbon cable is still in tact and not water damaged? If so, please let me know, I would like to buy it off of you, or, does anyone know where I can buy a ribbon cable that will work? Thanks!
Click to expand...
Click to collapse
http://cnn.cn
chauhn21 said:
http://cnn.cn
Click to expand...
Click to collapse
If you read my original post, I bought one from there, the cable doesn't work, it just shows a white screen, so I'm not sure whether the cable is defective, or if they cable they are selling is just incompatible.
If anyone has a broken phone with a good ribbon cable, please let me know ASAP, I'd like to buy it ASAP and am willing to pay a good price. Thanks!!
anyone have anything??
Hi All,
So I replaced the screen + digitizer in my Touch Pro and managed to break the connector on the Coaxial cable for the antenna.....
I have emailed everyone I can find in google with the HTC part number and description, but no one can get them! They all say I have to send the whole phone in....
Anyone know where I can get just the coax cable by itself?
Cheers in advance!
Here too
Yesterday wasn't a happy day...