WTB: Broken 8525 or, help me find a part....please! - 8525, TyTN, MDA Vario II, JasJam General

Hey guys, I need the ribbon cable for an 8525, I actually need 2 of them because I severed one, and then I severed the replacement from another phone that I bought. At first, I bought a ribbon cable from cnn.cn but it doesn't work for some reason, it just shows a white screen no matter what. I swapped my phones board into another persons phone and it worked fine, I put theirs in mine with the cnn.cn ribbon cable, and same thing, white screen. So, does anyone have a broken 8525 in which the ribbon cable is still in tact and not water damaged? If so, please let me know, I would like to buy it off of you, or, does anyone know where I can buy a ribbon cable that will work? Thanks!

theres many ribbon cables - please specify

Have you tested different front keyboard circuit board? I mean this part: http://cnn.cn/shop/tytnsoftbank-x01ht-front-keyboard-p-1553.html ?
I had the fading to white problem and it was fixed with that(there are a lot of faulty front KB switchboards around)..
You can also try a solution found here: http://forum.xda-developers.com/showthread.php?t=303872&page=8 post #78 -it might help you.

Neverwork said:
theres many ribbon cables - please specify
Click to expand...
Click to collapse
The one that goes from the LCD to the mainboard.
Yes I have tried, it's no the white screen problem, the ribbon itself is the problem, I took the ribbon out of anther phone and tried it with the front keyboard thats in my phone, worked perfectly....

myztikal47 said:
Hey guys, I need the ribbon cable for an 8525, I actually need 2 of them because I severed one, and then I severed the replacement from another phone that I bought. At first, I bought a ribbon cable from cnn.cn but it doesn't work for some reason, it just shows a white screen no matter what. I swapped my phones board into another persons phone and it worked fine, I put theirs in mine with the cnn.cn ribbon cable, and same thing, white screen. So, does anyone have a broken 8525 in which the ribbon cable is still in tact and not water damaged? If so, please let me know, I would like to buy it off of you, or, does anyone know where I can buy a ribbon cable that will work? Thanks!
Click to expand...
Click to collapse
http://cnn.cn

chauhn21 said:
http://cnn.cn
Click to expand...
Click to collapse
If you read my original post, I bought one from there, the cable doesn't work, it just shows a white screen, so I'm not sure whether the cable is defective, or if they cable they are selling is just incompatible.
If anyone has a broken phone with a good ribbon cable, please let me know ASAP, I'd like to buy it ASAP and am willing to pay a good price. Thanks!!

anyone have anything??

Related

Broken 8125 - Need a Rigid-Flex Board...

I am looking for the Rigid-Flex Board with ribbon cables attached that sits behind the LCD and is the board that the Front Keypad inputs to... Anyone got one that they could part with? It is part #:50H10045-01M I believe...
Thanks,
i have one but the ribbon cable is severed which causes the earpiece to not work, but everything else is functional.
R U sure you are talking about the same board/cable assembly? I need the one that contains the Front Keypad sensors and sits Behind the LCD, not in the main body of the unit but in the screen section...
fone_fanatic said:
i have one but the ribbon cable is severed which causes the earpiece to not work, but everything else is functional.
Click to expand...
Click to collapse
This is what i've got,
http://forum.xda-developers.com/attachment.php?attachmentid=28431&d=1149440000
remember, mines cut so the earpiece won't work, also check this thread for more pics and discussion.
Yup, same board... Any luck finding one for yourself?
well, if you read in the thread posted above, a little felt pad with a plastic top had cut mine. So i bought a damaged t-mobile mda off ebay and swapped the parts with the ripped one i have. So i'm using the good one on my wizard and have the one with the rip in the damaged mda. so what i've got now is the ripped one.
--------------------------------------------
I no longer have the mainboard so please don't PM me asking for it.

Replacment Ribbon Cable

Hi There,
I recently had to replace my screen with one I got from ebay. However being slightly careless I damaged the ribbon cable that connects the screen to the Mainbored
Has anyone got any ideas where i may be able to locate one of these?
attached is a picture of the damaged part.
Any help would be much appreciated
Thanks
Replacement Ribbon
Hi, You might want to try giving these people a ring or look on their Website as they sell parts for PDA's
http://www.turnonyourmobile.com/
Gez said:
Hi There,
I recently had to replace my screen with one I got from ebay. However being slightly careless I damaged the ribbon cable that connects the screen to the Mainbored
Has anyone got any ideas where i may be able to locate one of these?
attached is a picture of the damaged part.
Any help would be much appreciated
Thanks
Click to expand...
Click to collapse
You can order one from http://cnn.cn/shop/8525tytn-flex-cable-p-1732.html
That’s brilliant thanks, just ordered one. On the picture they have on there site I couldn’t see the black connecter which holds the cable in place. Guess ill see if it comes with it!
Thanks for you help much much appreciated.
can anyone say from where to get the flex cable nopw am in needliy urgent of the flex cable
sorry for my poor english
You can get both types on ebay(uk). Look for a username of shop-uk and they have both black and gold flex types (getting one myself to fix a hermes!). I think they are £15.99 GBP

plz help, dunno what's damaged, flex cable or LCD flex cable

Hey guys!
I've a really big problem:
I tried to fix the "white screen of death" syndrom of my SPV M3100. But when I put together the phone again (the LCD-part) I didn't push in the flex cable of the LCD hard enough into its connector, so when I closed back the LCD part, I might have damaged the flex cable. What I know for sure is that I broke the 2 white small crooks of the connector (by accident of course). Now when I turn on the phone, the screen stays off (but the upper LED for GSM/UMTS connectivity glows for a few seconed, also the LEDs from the small keypad), only when I push hard enough on the LCD-flexcable-connector, I see a white screen, sometimes some lines, but I never saw a "good screen" again. Now my fear is, that I screwed up the LCD flex cable, what can I do in that case? buy a whole new LCD only cuz the ribbon is broken? Do I have to replace the flex cable of the phone itself too, (cuz the crooks of the connector ar broken) or can I glue the connector somehow?
I hope you know what I mean. If you need any more info plz ask me.
Plz help me in this issue, this phone is the best I've ever ever had, I don't want to lose it! Thanks in advance!
greetz from Vienna, sebid.
PS: took you a pic, so you know about what connector I'm talking about.

plz help, dunno what's damaged, flex cable or LCD flex cable

Hey guys!
I've a really big problem:
I tried to fix the "white screen of death" syndrom of my SPV M3100. But when I put together the phone again (the LCD-part) I didn't push in the flex cable of the LCD hard enough into its connector, so when I closed back the LCD part, I might have damaged the flex cable. What I know for sure is that I broke the 2 white small crooks of the connector (by accident of course). Now when I turn on the phone, the screen stays off (but the upper LED for GSM/UMTS connectivity glows for a few seconed, also the LEDs from the small keypad), only when I push hard enough on the LCD-flexcable-connector, I see a white screen, sometimes some lines, but I never saw a "good screen" again. Now my fear is, that I screwed up the LCD flex cable, what can I do in that case? buy a whole new LCD only cuz the ribbon is broken? Do I have to replace the flex cable of the phone itself too, (cuz the crooks of the connector ar broken) or can I glue the connector somehow?
I hope you know what I mean. If you need any more info plz ask me.
Plz help me in this issue, this phone is the best I've ever ever had, I don't want to lose it! Thanks in advance!
greetz from Vienna, sebid.
PS: took you a pic, so you know about what connector I'm talking about.
You will need Both.
Go on ebay and try to see if someone is selling the same Cell for Parts that might help you in getting your parts cheat.White Screen is indication of a bad LCD and you said you damage your flex cable too so should try ebay for a Parts Phone.Good Luck. D

[Q] Samsung Galaxy S5 Lcd Repair

Hello, Is it possible to fix an Samsung Galaxy S5 lcd with a torn ribbon cable without having to buy a brand new one. I tore the ribbon cable. The lcd still turns on, but just doesnt respond to touch anymore. If it is possible, does anyone know any reputable services out there that could fix this problem. Thanks, David
What were you trying to do? Umm maybe check eBay for a replacement or some kind of fix kit
heynow82 said:
Hello, Is it possible to fix an Samsung Galaxy S5 lcd with a torn ribbon cable without having to buy a brand new one. I tore the ribbon cable. The lcd still turns on, but just doesnt respond to touch anymore. If it is possible, does anyone know any reputable services out there that could fix this problem. Thanks, David
Click to expand...
Click to collapse
U would need a microscope and very very gently scrape one side of ribbon and then reconnect the lines. Not an easy task. After that retape or hot glue but u will risk the broken connection if u move the ribbon too much trying to reassemble. Only other option is to replace the entire LCD assembly.

Categories

Resources