Related
The USB OTG feature is ROM-side or Kernel-side feature ?
Right now I'm running PA 2.54 with M-Kernel Plus a11 and did the "Jay's Recipe for Buttery Goodness" .
Before this I was purelly 4.1.2 stock and USB OTG was working.I used to connect a flash drive and an external 1 TB HDD and access (read-only) the data via an app. called Nexus Media Importer and even trough ES File Explorer too.
Now it doesn't work anymore.The flash drive has a red light on it which blinks and now when I attach it it doesn't even turn On anymore.It used to do on Stock.
It has been stated countless times that Stickmount does not work with 4.2...That is until today when Stickmount was updated by the dev. It works now with today's update.
Groid said:
It has been stated countless times that Stickmount does not work with 4.2...That is until today when Stickmount was updated by the dev. It works now with today's update.
Click to expand...
Click to collapse
I'm sorry I forgot to mention that PA 2.54 is based on 4.1.2 , so it's the same base I had when I was stock.
Today after trying Nexus Media Importer and ES File Explorer, I tried Stickmount too.
I'm afraid you didn't understood my question.
I am running CyanogenMod version 10.1.2 on a Nook Color via micro SD card. I can not get any USB devices (eg. thumb drives) to work. Nothing happens when I plug a USB device in, so it appears that the Nook Color does not recognize the device. To troubleshoot the problem, I ran a program called "USB Host Diagnostics," and received the following message:
USB Host Controller: version number 0.44
S3C USB Host Driver NOT found!
Root hub present, USB Host Mode is active.
What is the "S3C USB Host Driver? Where can I download it? How do I install the driver on the Nook Color? What steps do I need to take to get USB hosting to work? Thanks for any help you can give me to help me solve the problem!
CM 10.1.2 with USB Host / OTG
nuprps said:
I am running CyanogenMod version 10.1.2 on a Nook Color via micro SD card. I can not get any USB devices (eg. thumb drives) to work. Nothing happens when I plug a USB device in, so it appears that the Nook Color does not recognize the device. To troubleshoot the problem, I ran a program called "USB Host Diagnostics," and received the following message:
USB Host Controller: version number 0.44
S3C USB Host Driver NOT found!
Root hub present, USB Host Mode is active.
What is the "S3C USB Host Driver? Where can I download it? How do I install the driver on the Nook Color? What steps do I need to take to get USB hosting to work? Thanks for any help you can give me to help me solve the problem!
Click to expand...
Click to collapse
Good question.
This is the best I could dig up:
http://forum.xda-developers.com/showthread.php?p=40043731
Please let us know what you figure out!
nuprps said:
I am running CyanogenMod version 10.1.2 on a Nook Color via micro SD card. I can not get any USB devices (eg. thumb drives) to work. Nothing happens when I plug a USB device in, so it appears that the Nook Color does not recognize the device. To troubleshoot the problem, I ran a program called "USB Host Diagnostics," and received the following message:
USB Host Controller: version number 0.44
S3C USB Host Driver NOT found!
Root hub present, USB Host Mode is active.
What is the "S3C USB Host Driver? Where can I download it? How do I install the driver on the Nook Color? What steps do I need to take to get USB hosting to work? Thanks for any help you can give me to help me solve the problem!
Click to expand...
Click to collapse
Cyanogenmod 10.1.2 can't use USB host mode, if you need to use USB host mode use Cyanogenmod 7 and the nook color tools app to enable it
Sent from my NookColor using xda app-developers app
dombeef said:
Cyanogenmod 10.1.2 can't use USB host mode, if you need to use USB host mode use Cyanogenmod 7 and the nook color tools app to enable it
Click to expand...
Click to collapse
To expand on this: CM7 was based on top of an older Linux kernel version (2.6.32), on top of which a lot of hard work was done to enable USB host mode. In porting to CM9/10/10.1, we moved to a newer kernel version (3.0), and some of that work wasn't brought over. There aren't any technical barriers to enabling USB host mode on newer kernels -- someone "just" needs to spend the time to go through the patches for host mode in 2.6.32 and figure out what bits need to be forward ported to 3.0. (In case you haven't figured out yet, time is the scarcest asset in a volunteer project like this one ...)
nuprps said:
What is the "S3C USB Host Driver? Where can I download it? How do I install the driver on the Nook Color?
Click to expand...
Click to collapse
"S3C USB Host" refers to the USB OTG hardware included in Samsung S5PC110 ("Exynos3") devices, including the Nexus S and most Galaxy S series phones. It's not applicable to OMAP devices like the Nook Color, which use different, much more mature USB OTG hardware and drivers from Mentor Graphics and TI (musb_hdrc).
USB Host Mode with CM10
steven676 said:
To expand on this: CM7 was based on top of an older Linux kernel version (2.6.32), on top of which a lot of hard work was done to enable USB host mode. In porting to CM9/10/10.1, we moved to a newer kernel version (3.0), and some of that work wasn't brought over. There aren't any technical barriers to enabling USB host mode on newer kernels -- someone "just" needs to spend the time to go through the patches for host mode in 2.6.32 and figure out what bits need to be forward ported to 3.0. (In case you haven't figured out yet, time is the scarcest asset in a volunteer project like this one ...)
"S3C USB Host" refers to the USB OTG hardware included in Samsung S5PC110 ("Exynos3") devices, including the Nexus S and most Galaxy S series phones. It's not applicable to OMAP devices like the Nook Color, which use different, much more mature USB OTG hardware and drivers from Mentor Graphics and TI (musb_hdrc).
Click to expand...
Click to collapse
THANKS to EVERYONE for responding and clarifying the situation with USB Hosting mode on CM 10. The information saves me a lot of frustration in trying to get my Nook Color to recognize my USB devices. At least I can get USB Hosting working if I use CM7; that's an option, so thanks a lot for pointing it out. I'm a newbie and struggling to learn Android related stuff. If I had the technical know-how, I'd love to help solve the USB Host issue with CM10. For me at least, USB hosting would be a valuable feature in CM10 and beyond. I really like how well CM10 runs on my device with a SanDisk 8Gb micro SDHC card.
To get some of my devices (eg. keyboard) working on CM10, I may try the bluetooth capability in CM 10. However, I read somewhere that the range of bluetooth was limited on the Nook Color. I think that was awhile ago when developers initially unlocked bluetooth on the Nook Color. Is bluetooth range still a significant issue?
THANKS AGAIN!!!
nuprps said:
THANKS to EVERYONE for responding and clarifying the situation with USB Hosting mode on CM 10. The information saves me a lot of frustration in trying to get my Nook Color to recognize my USB devices. At least I can get USB Hosting working if I use CM7; that's an option, so thanks a lot for pointing it out. I'm a newbie and struggling to learn Android related stuff. If I had the technical know-how, I'd love to help solve the USB Host issue with CM10. For me at least, USB hosting would be a valuable feature in CM10 and beyond. I really like how well CM10 runs on my device with a SanDisk 8Gb micro SDHC card.
To get some of my devices (eg. keyboard) working on CM10, I may try the bluetooth capability in CM 10. However, I read somewhere that the range of bluetooth was limited on the Nook Color. I think that was awhile ago when developers initially unlocked bluetooth on the Nook Color. Is bluetooth range still a significant issue?
THANKS AGAIN!!!
Click to expand...
Click to collapse
There is a limited range for bluetooth, it was actually hidden in the official rom and not enabled until some developers found it out.
IF you really want USB host on a newish android version, you might want to use CM9, it still has usb host and I was able to use it a few months ago for a project. But there is limited opengl support and it might have a few minor bugs in it.
USB Host Mode with CM10
dombeef said:
There is a limited range for bluetooth, it was actually hidden in the official rom and not enabled until some developers found it out.
IF you really want USB host on a newish android version, you might want to use, it still has usb host and I was able to use it a few months ago for a project. But there is limited opengl support and it might have a few minor bugs in it.
Click to expand...
Click to collapse
Thanks for the tip about USB hosting mode and CM9. I'll download CM9 and see how it works with my Nook Color and USB peripherals.
USB Hosting with CM9?
dombeef said:
There is a limited range for bluetooth, it was actually hidden in the official rom and not enabled until some developers found it out.
IF you really want USB host on a newish android version, you might want to use, it still has usb host and I was able to use it a few months ago for a project. But there is limited opengl support and it might have a few minor bugs in it.
Click to expand...
Click to collapse
Please provide more detail about how you enabled USB hosting mode in CM9. I downloaded and installed CM9, but I can't figure out how to enable USB mode. I tried an app called "Nook Color Tweaks," but the app clearly states that it does not work with CM9. What steps did you take to get USB hosting on your device running CM9? Please clarify. Thank you!
nuprps said:
Please provide more detail about how you enabled USB hosting mode in CM9. I downloaded and installed CM9, but I can't figure out how to enable USB mode. I tried an app called "Nook Color Tweaks," but the app clearly states that it does not work with CM9. What steps did you take to get USB hosting on your device running CM9? Please clarify. Thank you!
Click to expand...
Click to collapse
I'm sorry,the app I was referring to was Nook Color Tweaks. Whoops :laugh:
A few of the options will not work on CM9 but the USB host will/should work.
I haven't used CM9 in a while now but if usb host doesn't work on the rom I linked to then you may want to use a ROM from eyeballer's unofficial CM9 nightly builds and try the latest opengl build. I had used eyeballer's rom in the past and it did work with USB host.
USB Host mode in CM11
steven676 said:
To expand on this: CM7 was based on top of an older Linux kernel version (2.6.32), on top of which a lot of hard work was done to enable USB host mode. In porting to CM9/10/10.1, we moved to a newer kernel version (3.0), and some of that work wasn't brought over. There aren't any technical barriers to enabling USB host mode on newer kernels -- someone "just" needs to spend the time to go through the patches for host mode in 2.6.32 and figure out what bits need to be forward ported to 3.0. (In case you haven't figured out yet, time is the scarcest asset in a volunteer project like this one ...)
Click to expand...
Click to collapse
I think the changes need to be made in encore_defconfig (or encore _cm11_defconfig). I can try to make the changes but these files are automatically generated in the make process. Could you point me to the configuration files where this happens? I think it must be in device/bn/encore.
Hello,
First, I must say that I read many articles, tutorials and threads before, without any positive results so I decided to ask this question. I don't know why I cannot connect external device to my Nexus 7 3G (tilapia). Actually, my tablet's working on CyanogenMod 10.2 unofficial and is based on its kernel. It's even unable to detect device in recovery mode (I've flashed TWRP 2.6.1). I can add that I'm using otg-usb cable which has been included in my set of purchasing. I don't know is it important but my pendrive doesn't see to be ready to use while it's connected via cable because the micro diode is off wheres after connect to my computer it's always on (twinkle or shine). Of course I've installed StickMount app and others similar free for mounting devices and file explorers from Google Store. Additionally, Icon "Mount USB Storage" in Settings->Storage is constantly off (unable to touch). I'm waiting for your suggestions.
Thank you in advance for any replys.
EDIT.
I resolved it. The issue was responding to my cable. I've used the wrong one because I didn't know that it was from the other tablet than this one. I connected my device via new one and it's working perfectly now. Excuse for bothering you.
so my OTG Drivers for the Galaxy S4 got deleted while trying to get NTFS Support on Stock ROM, it still detects but cant mount, under TWRP it tells me "E:Unable to mount '/usb-otg' "
"Usb host Controller" tell me the Drivers are missing also
so please if someone could share theres and instructions on how to install it i would be very grateful
I installed a new Rom and that didnt fix it either
Bump
rowjack1993 said:
so my OTG Drivers for the Galaxy S4 got deleted while trying to get NTFS Support on Stock ROM, it still detects but cant mount, under TWRP it tells me "E:Unable to mount '/usb-otg' "
"Usb host Controller" tell me the Drivers are missing also
so please if someone could share theres and instructions on how to install it i would be very grateful
I installed a new Rom and that didnt fix it either
Click to expand...
Click to collapse
I found this app. on Play Store ... may help you...
https://play.google.com/store/apps/details?id=net.shajul.usbotg
Sent from my GT-I9505
Xode said:
I found this app. on Play Store ... may help you...
https://play.google.com/store/apps/details?id=net.shajul.usbotg
Sent from my GT-I9505
Click to expand...
Click to collapse
actually thats the reason for my problems, i installed it, it didnt add ntfs support so i uninstalled it, now no OTG works on my phone at all
So i just got my MOJO and was in the process of rooting it but, i can't seem to get windows 7 to recognize the device when i connect it by USB. It always shows up as "unknown device". How do i get Windows 7 to recognize it?
Also i have another problem regarding sound....there isn't any. When i load up a video on the MOJO, or just try to do anything that would have sound, theres nothing. I have the sound at MAX using the CTRL gamepad controls. Still, nothing.
I knew the MOJO was going to be one of those devices you have to fight with in order to get it to do what you want but, this is worse than i expected.
Help?
It really is a terrible experience out of the box. We know who to blame Mad Catz!
For Windows to recognize it, you have to install ADB Drivers, try the ones from teamandroid: www teamandroid .com/download-android-usb-drivers/
You will have to locate the device in the windows device manager and install the drivers manually.
But you can root the mojo without conencting it to the pc. you can root it with towelroot (Version 1). you have to search with google for the apk. the newest version (3) and v2 won't work.
After that you can use Flashify to flash a custom recovery.
For the sound: do you have another hdmi slot at your tv? this sounds like a connection problem.
Pitey said:
For Windows to recognize it, you have to install ADB Drivers, try the ones from teamandroid: www teamandroid .com/download-android-usb-drivers/
You will have to locate the device in the windows device manager and install the drivers manually.
But you can root the mojo without conencting it to the pc. you can root it with towelroot (Version 1). you have to search with google for the apk. the newest version (3) and v2 won't work.
After that you can use Flashify to flash a custom recovery.
For the sound: do you have another hdmi slot at your tv? this sounds like a connection problem.
Click to expand...
Click to collapse
Connecting it to the PC is (supposed)to be the EASY way though. Also....i don't see the mojo listed among the devices on that link you mentioned. Which one should i download??
PSP-Fan said:
Connecting it to the PC is (supposed)to be the EASY way though. Also....i don't see the mojo listed among the devices on that link you mentioned. Which one should i download??
Click to expand...
Click to collapse
Try the driver from Samsung.
If they don't work, use the universal adb drivers: github.com/koush/UniversalAdbDriver
Towelroot would be much easier, you just install the App and klick one button (but only v1 works with mojo)
Pitey said:
Try the driver from Samsung.
If they don't work, use the universal adb drivers: github.com/koush/UniversalAdbDriver
Towelroot would be much easier, you just install the App and klick one button (but only v1 works with mojo)
Click to expand...
Click to collapse
Thanks for the reply but i've tried all towelroot 1.0 as well as 3.0 and it did NOT work. I got an error saying, "This phone isn't currently supported". No matter which version i try.
Edit: Ok got it working! Turns out i was attempting the V2.0 & V3.0 versions. There are plenty of sites out there that would claim to have v1.0. However, once i downloaded and installed it, i'd see a "v2" or "v3" at the top of the screen.
In the end, I had to do a google search for a towelroot spefically for MOJO. Only then did i finally come across a site that had a legit v1.0.
PSP-Fan said:
Thanks for the reply but i've tried all towelroot 1.0 as well as 3.0 and it did NOT work. I got an error saying, "This phone isn't currently supported". No matter which version i try.
Edit: Ok got it working! Turns out i was attempting the V2.0 & V3.0 versions. There are plenty of sites out there that would claim to have v1.0. However, once i downloaded and installed it, i'd see a "v2" or "v3" at the top of the screen.
In the end, I had to do a google search for a towelroot spefically for MOJO. Only then did i finally come across a site that had a legit v1.0.
Click to expand...
Click to collapse
Good job! I'm glad it worked in the end.
I also had to search a long time to find the correct tr version. But you will never need it again, once it's rooted. if you want to go back to stock, you can flash the original firmware with twrp, too!
Pitey said:
Good job! I'm glad it worked in the end.
I also had to search a long time to find the correct tr version. But you will never need it again, once it's rooted. if you want to go back to stock, you can flash the original firmware with twrp, too!
Click to expand...
Click to collapse
Here was the thread it was in:
http://forum.xda-developers.com/mad-catz-mojo/development/root-mojo-towelroot-one-click-t2799712
And the link for V1.0 in case anyone wants it. It was tough to find:
http://www.mediafire.com/download/oxrryya4ffs4w6u/tr-1.apk
Ok so after a few hard weeks messing with this device, i've figured out ways to fix all its quirks, except for one: Not being able to connect to Pc. Thats annoying. I don't like having to remove my Micro SD card everytime i want to add more files.
Especially since this device was deigned in such a way that, its virtually impossible to remove without first removing the HDMI cable first. As they are sooooo CLOSE together.
Any suggestions for drivers? I just need it to function like a plain USB mass storage device, so i can access my Micro SD card on the Pc.
Yeah, the microSD is a pain to remove.. but I never need to touch it.
I don't understand why you want to access the SD via PC as a USB device?
To access the sdcard over wifi I use a SambaDroid server on the mojo pointed to the sdcard.. it works.
gwaldo said:
Yeah, the microSD is a pain to remove.. but I never need to touch it.
I don't understand why you want to access the SD via PC as a USB device?
To access the sdcard over wifi I use a SambaDroid server on the mojo pointed to the sdcard.. it works.
Click to expand...
Click to collapse
I want to be able to freely connect my MOJO by USB and drag & drop files at will to the Micro SD, without having to physically remove the Micro SD card each time (which also means unplugging the HDMI every time!!).
So far i'm enjoying the MOJO console as i've found fixes for every other problem i've run into. This is the only one that continues to elude me. I had not thought about the possibility of my Pc being able to connect remotely though wi-fi, to access the MOJO storage. This might be yet another out-of-the-box fix for me. Can you explain more about how this is done??
PSP-Fan said:
I had not thought about the possibility of my Pc being able to connect remotely though wi-fi, to access the MOJO storage. This might be yet another out-of-the-box fix for me. Can you explain more about how this is done??
Click to expand...
Click to collapse
Not sure why you want to have a USB on the MOJO that way... the idea of MOJO(or any other topset box) is to keep it online next to your TV, I used to plug USB thumb drives into it.. but you never want to change microSD cards.. same like on a phone or tablet really.
Just install this on mojo:
https://play.google.com/store/apps/details?id=berserker.android.apps.sambadroid&hl=en
You can configure it so it shares a folder (google how to share folders on windows or youtube sambadroid).
You can use just the microSD (i think it's /mnt/card1) or the internal storage(i think /storage) or both using just /
I wouldn't do just / though.
It's pretty easy, just replicates windows file sharing and works well.