official but rooted ICS - Acer Iconia A500

i am thinking of selling on my a500 but due to some small bugs in the custom Rom i am using i thought it good to put it back to stock.
it came with honeycomb but i believe ICS has been released officially so i wondered if it was easy to go back to stock ICS. i think it is on the honeycomb bootloader but don't know how to check.
any help welcomed.

3, 2, 1.....
Sent from my HTC One X using xda app-developers app

A little more info is needed.
1. a500 or a501?
2. Current bootloader (stock bootloader, HC Bootloader, or Skirlax_CZ unlocked bootloader)
3. current rom
You can check your bootloader version, by downloading the Acer Recovery Installer from the market. Just start the app. It should tell you bootloader version.
This will help you to go to the right direction.
You can try this, if you have an a500. It should put you in stock ICS.
http://forum.xda-developers.com/showthread.php?t=1699277
Also, will tell you, this post belongs in the Q&A forum. Not in development forum. So please PM one of the assigned forum Mods, and request this thread be moved to Q&A forum.
So you shark wanna-be's, leave this one alone.
MD

Moscow Desire said:
A little more info is needed.
1. a500 or a501?
2. Current bootloader (stock bootloader, HC Bootloader, or Skirlax_CZ unlocked bootloader)
3. current rom
You can check your bootloader version, by downloading the Acer Recovery Installer from the market. Just start the app. It should tell you bootloader version.
This will help you to go to the right direction.
You can try this, if you have an a500. It should put you in stock ICS.
http://forum.xda-developers.com/showthread.php?t=1699277
Also, will tell you, this post belongs in the Q&A forum. Not in development forum. So please PM one of the assigned forum Mods, and request this thread be moved to Q&A forum.
So you shark wanna-be's, leave this one alone.
MD
Click to expand...
Click to collapse
really appreciate the help mate, it is a500 and i just checked the boot loader, it is 3.01

I have the same question, and I use A500 too, but I don't know what is the loader I use. How do I know that?
For the rom, I use flexreaper but it's slow and I'd like to go back to stock.
Thank you.
EDIT : the rom files in this thread are not available http://forum.xda-developers.com/showthread.php?t=1113878

french-anonymous said:
I have the same question, and I use A500 too, but I don't know what is the loader I use. How do I know that?
For the rom, I use flexreaper but it's slow and I'd like to go back to stock.
Thank you.
EDIT : the rom files in this thread are not available http://forum.xda-developers.com/showthread.php?t=1113878
Click to expand...
Click to collapse
I just told in the previous post, how to get bootloader version the easy way.
As with the links you mention,,,, tomorrow. It;s moscow time.
And, I will place a request, to move this to the Q&A forum, where it should be.
MD

Related

[Q] I need help starting off

im new to rooting, I just want to be safe, I'll write my a501s stuff, and i kinda want a pish in the right direction of how to root, and over lock it
Device - Acer a501 (has 3g)
Ver - 3.2.1
Kernel - 2.6.36.3+
Build - Acer_a501_4.066.31_COM_GEN1
I've rooted phones before but I'm still pretty new to this, help is so appreciated
if it helps with updates etc, I live in australia
there is a thread not 4_5 below this one
How to root 3.2
You need to fallow the instructions there then flash a rom from dev forum for the 501.
Thread is by Timmy dean. Next time search there is no curb service here at XDA.
My one free search for you has now been granted
Good luck
erica_renee said:
there is a thread not 4_5 below this one
How to root 3.2
You need to fallow the instructions there then flash a rom from dev forum for the 501.
Thread is by Timmy dean. Next time search there is no curb service here at XDA.
My one free search for you has now been granted
Good luck
Click to expand...
Click to collapse
Damn girl, you are ruthless.
Dude, she's messing with you. She runs a stock rom
Check TimmyDeans thread. It should do all things, as he added superuser. Maybe CWM Recovery.
Any questions, just ask
be nice to me. Was just trying to help.Sure my tab is TOTALLY NOT!!!!!!!!!!! STOCK

How to unroot iconia tab need stock rom for Singapore tab

Hi! All. I want to unroot my iconia a500 32gb wifi only tab. Its a Singapore Set so need the stock rom to flash back. I have iconia root which i can use to unroot. But not sure where to get the stock rom & how to flash it & enable OTA updates from Acer.
wolvie77 said:
Hi! All. I want to unroot my iconia a500 32gb wifi only tab. Its a Singapore Set so need the stock rom to flash back. I have iconia root which i can use to unroot. But not sure where to get the stock rom & how to flash it & enable OTA updates from Acer.
Click to expand...
Click to collapse
Hey, another Singapore xda-er here. OTA's are usually posted on this forum, you don't really need it. If you really want the stock rom, search it in the dev forums. If you can't find it, just unroot your tablet using Gingerbreak
dongimin2 said:
Hey, another Singapore xda-er here. OTA's are usually posted on this forum, you don't really need it. If you really want the stock rom, search it in the dev forums. If you can't find it, just unroot your tablet using Gingerbreak
Click to expand...
Click to collapse
Hi! i actually have the iconia root app to unroot. my problem is when i root previously, i did not save a copy of my stock rom & now i need one to return to official acer rom that is meant for the Singapore market in order for me to get OTA updates from them
wolvie77 said:
Hi! i actually have the iconia root app to unroot. my problem is when i root previously, i did not save a copy of my stock rom & now i need one to return to official acer rom that is meant for the Singapore market in order for me to get OTA updates from them
Click to expand...
Click to collapse
Ewww.... you may be hard pressed to get the exact same ROM as you were issued, if you didn't write down the build numbers before rooting and installing a custom rom.
My guess, would a Com Gen 1, or a TMPL. Both seem to be for eastern Europe, and support a few asian multiple character languages. Com Gen 1 having the most I believe.
Sorry I couldn't be of much help.
Moscow Desire said:
Ewww.... you may be hard pressed to get the exact same ROM as you were issued, if you didn't write down the build numbers before rooting and installing a custom rom.
My guess, would a Com Gen 1, or a TMPL. Both seem to be for eastern Europe, and support a few asian multiple character languages. Com Gen 1 having the most I believe.
Sorry I couldn't be of much help.
Click to expand...
Click to collapse
This is what i pulled from another forum where a fellow user posted his built. Hope its of some use.
Android Version : 3.0.1
Build Number : Acer_A500_1.016.04_COM.GEN1
Hope you got the help you needed.
In the future, please use the Q&A forum for questions and requests such as this. Only development work should be posted in the development thread.
Thanks.
wolvie77 said:
This is what i pulled from another forum where a fellow user posted his built. Hope its of some use.
Android Version : 3.0.1
Build Number : Acer_A500_1.016.04_COM.GEN1
Click to expand...
Click to collapse
That will work. Now.... go away to the Q&A forum. Erica_Renee awaits you
My apologies for the mistakes i've made. Will be more careful the next time i post here. I shall go to Q&A to seek help.
wolvie77 said:
My apologies for the mistakes i've made. Will be more careful the next time i post here. I shall go to Q&A to seek help.
Click to expand...
Click to collapse
No Problem... really. Hope Erica fixes you up!

[q] rooted HC to ICS - how?

OK, I rooted my A500 towards the end of last year since it didn't seem like Acer was going to keep up with the latest Android operating systems.
I checked in here recently and saw that ICS has been released for the A500. Joy.
So, I used CWM v5.0.0.0(thor2002ro rev1.3.4) to try and flash the rooted Acer OTA ICS. I figured I'd try the original ICS before I start flashing other people's ICS roms.
All went well until the reboot. It froze on the ACER screen and would go no farther. I figured that perhaps the cache/data/dalvik didn't clear the first time so I repeated those steps. format data user reset, clear caches, clear bat stats. Reflashed rom.
Reboot.
Stuck at ACER screen again.
I searched the forums and found that I need a different bootloader? There are a bunch of threads, but I can't seem to make sense of them.
Can someone please give me a step-by-step plan to get this thing from where I'm at to ICS?
I did get my tab working again by repeating whole process but installed HC 3.2.1 Flexstriker r9.6. It booted up into the rom just fine.
I guess this thread - http://forum.xda-developers.com/showthread.php?t=1622425 - is close to what I need but it's tough to follow with all the different options and colors/fonts...
Can anyone help me down the right path?
Thanks in advance.
You can flash one of Civato's old Flexreaper roms on a HC bootloader. Since it is an ICS rom you can just update the boatloader as mentioned in the thread you linked.
I would suggest flashing Flexreaper 9 or something, his newer roms require you already have the ICS BL on. After you update the BL then just upgrade to one of his newer roms. They work very well. I've personally had no problems at all with his roms.
but....
If you want the stock Acer ICS, you have to downgrade all the way back to the old 3.x unstable rom and let it update from there. It will take a few updates, but it should get you to ICS.
Sorry, but this is a development forum not questions and answer, xda is strict about keeping things organize, please read the rules and guidelines.
Sent from my A500 using XDA
starkiller86 said:
....
If you want the stock Acer ICS, you have to downgrade all the way back to the old 3.x unstable rom and let it update from there. It will take a few updates, but it should get you to ICS.
Click to expand...
Click to collapse
Any guide on this? I need it for warranty issues (charging stops after few minutes with power light flashing white / amber) Search is not working and there is no "going back to stock" thread in the dev section sticky roll-up thread.
The thought of going back down and then upgrading back up didn't appeal to me.. So, I bit the bullet and tried to make sense of the thread I mentioned... I managed to get through it and I now have the sandwich on my tablet.
What a pain in the.......
OK... ready for the jelly bean leaks now.
starkiller86 said:
You can flash one of Civato's old Flexreaper roms on a HC bootloader. Since it is an ICS rom you can just update the boatloader as mentioned in the thread you linked.
I would suggest flashing Flexreaper 9 or something, his newer roms require you already have the ICS BL on. After you update the BL then just upgrade to one of his newer roms. They work very well. I've personally had no problems at all with his roms.
but....
If you want the stock Acer ICS, you have to downgrade all the way back to the old 3.x unstable rom and let it update from there. It will take a few updates, but it should get you to ICS.
Click to expand...
Click to collapse
I did read the rules/guidelines..
It's a question about development (or at least how to use some developed tools), so I put it here..
If it doesn't belong here, then perhaps a mod would be so kind as to move it..
At this point, the thread really could be deleted as the original query is handled.
However, tkolev has added a question.
lifeofcoding said:
Sorry, but this is a development forum not questions and answer, xda is strict about keeping things organize, please read the rules and guidelines.
Sent from my A500 using XDA
Click to expand...
Click to collapse

How do I proceed from here?

A while back when ICS was first leaked, I flashed it.
My A500 is not rooted or unlocked or anything. It was completely stock HC.
Whatever it was that I flashed, I was able to flash using the built-in recovery tool.
Under Settings, it says this:
Image version: Acer_AV041_A500_RV05RC01_PA_CUS1
Build number: Acer_AV01_A500_1.033.00_PA_CUS1
Now all the threads I'm reading about flashing newer roms says I have to be on GEN1 first. Searching for PA_CUS1 doesn't give me any results.
What do I do, where do I go, what can I flash from where I am now?
And pointers would be greatly appreciated.
this is not a forum for questions. should have posted this in Q&A forums buddy
mythek88 said:
this is not a forum for questions. should have posted this in Q&A forums buddy
Click to expand...
Click to collapse
Thought about that, but this question is specifically about what this forum is designed for. No? Regardless, a mod can move this thread if they feel necessary. But thanks for taking the time to post. I think.
:highfive:
i think your on the first build of ics, have a look for the root method and see if you can root the rom your running, if successive i would then recommend you try using the flexreaper extreem v5.1 the latest and greatest from civato ,
if you reply ill try to help more in-depth but i just got back from a engagement party and its 3:30 am sooooooo...u know
note: im so luving the new :highfive: highfive emoticon :laugh::highfive::highfive::highfive:

Please Help i there nobody the can answer this guestion!

Hello,
I want to go back to 3.2.1. acer A501 firmware but i dont now which one i need.
I have now ICS 4.0.3
Kernel 2.6.39.4+
Imageversion Acer_AV041_A501_RV20RC08_WW_GEN1
Buid-number Acer_AV041_A501_1.023.00_WW_GEN1
Afbeelding P/N FM.S14A0.02D
Please can antone tell me which one i need, and how i can go back.
Not Rooted!
cebbes30 said:
Hello,
I want to go back to 3.2.1. acer A501 firmware but i dont now which one i need.
I have now ICS 4.0.3
Kernel 2.6.39.4+
Imageversion Acer_AV041_A501_RV20RC08_WW_GEN1
Buid-number Acer_AV041_A501_1.023.00_WW_GEN1
Afbeelding P/N FM.S14A0.02D
Please can antone tell me which one i need, and how i can go back.
Not Rooted!
Click to expand...
Click to collapse
You will need to do research and read the forum threads...
This thread has links to the older A500/A501 firmware loads: http://forum.xda-developers.com/showthread.php?t=1816560
Unfortunately, you cannot simply run an update firmware flash to go back, specially as non-rooted. The best option that has worked well for me is the AfterOTA utility, which you can find here: http://forum.xda-developers.com/showthread.php?t=1675939
Read up on AfterOTA, it's fantastic to flash older loads, bootloaders, etc.
Dude, at 1st I wanted to go back also, but after figuring out how easy it is to use custom rooms, I'm glad I stayed with custom rooms.
Sent from my A500 using xda app-developers app
Thread Moved
Also, seeing this is posted in the wrong forum, I will take the liberty to move it to the correct forum.
MD

Categories

Resources